aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/tty/serial/sc26xx.c
diff options
context:
space:
mode:
authorAlexander Shiyan <shc_work@mail.ru>2013-12-19 15:02:50 -0500
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2013-12-19 15:34:30 -0500
commit4903713cac8bd41b576e4e3eff3d54bd199a7737 (patch)
tree19390eab25ec304c340efa79d8de233cf83bb2f5 /drivers/tty/serial/sc26xx.c
parent48c0247d7b7bf58abb85a39021099529df365c4d (diff)
serial: Remove old SC26XX driver
New driver for NXP (Philips) UART ICs was introduced in September 2012. Old driver no longer used anywhere, this patch removes it. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/tty/serial/sc26xx.c')
-rw-r--r--drivers/tty/serial/sc26xx.c749
1 files changed, 0 insertions, 749 deletions
diff --git a/drivers/tty/serial/sc26xx.c b/drivers/tty/serial/sc26xx.c
deleted file mode 100644
index 887b4f770749..000000000000
--- a/drivers/tty/serial/sc26xx.c
+++ /dev/null
@@ -1,749 +0,0 @@
1/*
2 * SC268xx.c: Serial driver for Philiphs SC2681/SC2692 devices.
3 *
4 * Copyright (C) 2006,2007 Thomas Bogendörfer (tsbogend@alpha.franken.de)
5 */
6
7#include <linux/module.h>
8#include <linux/kernel.h>
9#include <linux/errno.h>
10#include <linux/tty.h>
11#include <linux/tty_flip.h>
12#include <linux/major.h>
13#include <linux/circ_buf.h>
14#include <linux/serial.h>
15#include <linux/sysrq.h>
16#include <linux/console.h>
17#include <linux/spinlock.h>
18#include <linux/slab.h>
19#include <linux/delay.h>
20#include <linux/init.h>
21#include <linux/platform_device.h>
22#include <linux/irq.h>
23#include <linux/io.h>
24
25#warning "Please try migrate to use new driver SCCNXP and report the status" \
26 "in the linux-serial mailing list."
27
28#if defined(CONFIG_MAGIC_SYSRQ)
29#define SUPPORT_SYSRQ
30#endif
31
32#include <linux/serial_core.h>
33
34#define SC26XX_MAJOR 204
35#define SC26XX_MINOR_START 205
36#define SC26XX_NR 2
37
38struct uart_sc26xx_port {
39 struct uart_port port[2];
40 u8 dsr_mask[2];
41 u8 cts_mask[2];
42 u8 dcd_mask[2];
43 u8 ri_mask[2];
44 u8 dtr_mask[2];
45 u8 rts_mask[2];
46 u8 imr;
47};
48
49/* register common to both ports */
50#define RD_ISR 0x14
51#define RD_IPR 0x34
52
53#define WR_ACR 0x10
54#define WR_IMR 0x14
55#define WR_OPCR 0x34
56#define WR_OPR_SET 0x38
57#define WR_OPR_CLR 0x3C
58
59/* access common register */
60#define READ_SC(p, r) readb((p)->membase + RD_##r)
61#define WRITE_SC(p, r, v) writeb((v), (p)->membase + WR_##r)
62
63/* register per port */
64#define RD_PORT_MRx 0x00
65#define RD_PORT_SR 0x04
66#define RD_PORT_RHR 0x0c
67
68#define WR_PORT_MRx 0x00
69#define WR_PORT_CSR 0x04
70#define WR_PORT_CR 0x08
71#define WR_PORT_THR 0x0c
72
73/* SR bits */
74#define SR_BREAK (1 << 7)
75#define SR_FRAME (1 << 6)
76#define SR_PARITY (1 << 5)
77#define SR_OVERRUN (1 << 4)
78#define SR_TXRDY (1 << 2)
79#define SR_RXRDY (1 << 0)
80
81#define CR_RES_MR (1 << 4)
82#define CR_RES_RX (2 << 4)
83#define CR_RES_TX (3 << 4)
84#define CR_STRT_BRK (6 << 4)
85#define CR_STOP_BRK (7 << 4)
86#define CR_DIS_TX (1 << 3)
87#define CR_ENA_TX (1 << 2)
88#define CR_DIS_RX (1 << 1)
89#define CR_ENA_RX (1 << 0)
90
91/* ISR bits */
92#define ISR_RXRDYB (1 << 5)
93#define ISR_TXRDYB (1 << 4)
94#define ISR_RXRDYA (1 << 1)
95#define ISR_TXRDYA (1 << 0)
96
97/* IMR bits */
98#define IMR_RXRDY (1 << 1)
99#define IMR_TXRDY (1 << 0)
100
101/* access port register */
102static inline u8 read_sc_port(struct uart_port *p, u8 reg)
103{
104 return readb(p->membase + p->line * 0x20 + reg);
105}
106
107static inline void write_sc_port(struct uart_port *p, u8 reg, u8 val)
108{
109 writeb(val, p->membase + p->line * 0x20 + reg);
110}
111
112#define READ_SC_PORT(p, r) read_sc_port(p, RD_PORT_##r)
113#define WRITE_SC_PORT(p, r, v) write_sc_port(p, WR_PORT_##r, v)
114
115static void sc26xx_enable_irq(struct uart_port *port, int mask)
116{
117 struct uart_sc26xx_port *up;
118 int line = port->line;
119
120 port -= line;
121 up = container_of(port, struct uart_sc26xx_port, port[0]);
122
123 up->imr |= mask << (line * 4);
124 WRITE_SC(port, IMR, up->imr);
125}
126
127static void sc26xx_disable_irq(struct uart_port *port, int mask)
128{
129 struct uart_sc26xx_port *up;
130 int line = port->line;
131
132 port -= line;
133 up = container_of(port, struct uart_sc26xx_port, port[0]);
134
135 up->imr &= ~(mask << (line * 4));
136 WRITE_SC(port, IMR, up->imr);
137}
138
139static bool receive_chars(struct uart_port *port)
140{
141 struct tty_port *tport = NULL;
142 int limit = 10000;
143 unsigned char ch;
144 char flag;
145 u8 status;
146
147 /* FIXME what is this trying to achieve? */
148 if (port->state != NULL) /* Unopened serial console */
149 tport = &port->state->port;
150
151 while (limit-- > 0) {
152 status = READ_SC_PORT(port, SR);
153 if (!(status & SR_RXRDY))
154 break;
155 ch = READ_SC_PORT(port, RHR);
156
157 flag = TTY_NORMAL;
158 port->icount.rx++;
159
160 if (unlikely(status & (SR_BREAK | SR_FRAME |
161 SR_PARITY | SR_OVERRUN))) {
162 if (status & SR_BREAK) {
163 status &= ~(SR_PARITY | SR_FRAME);
164 port->icount.brk++;
165 if (uart_handle_break(port))
166 continue;
167 } else if (status & SR_PARITY)
168 port->icount.parity++;
169 else if (status & SR_FRAME)
170 port->icount.frame++;
171 if (status & SR_OVERRUN)
172 port->icount.overrun++;
173
174 status &= port->read_status_mask;
175 if (status & SR_BREAK)
176 flag = TTY_BREAK;
177 else if (status & SR_PARITY)
178 flag = TTY_PARITY;
179 else if (status & SR_FRAME)
180 flag = TTY_FRAME;
181 }
182
183 if (uart_handle_sysrq_char(port, ch))
184 continue;
185
186 if (status & port->ignore_status_mask)
187 continue;
188
189 tty_insert_flip_char(tport, ch, flag);
190 }
191 return !!tport;
192}
193
194static void transmit_chars(struct uart_port *port)
195{
196 struct circ_buf *xmit;
197
198 if (!port->state)
199 return;
200
201 xmit = &port->state->xmit;
202 if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
203 sc26xx_disable_irq(port, IMR_TXRDY);
204 return;
205 }
206 while (!uart_circ_empty(xmit)) {
207 if (!(READ_SC_PORT(port, SR) & SR_TXRDY))
208 break;
209
210 WRITE_SC_PORT(port, THR, xmit->buf[xmit->tail]);
211 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
212 port->icount.tx++;
213 }
214 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
215 uart_write_wakeup(port);
216}
217
218static irqreturn_t sc26xx_interrupt(int irq, void *dev_id)
219{
220 struct uart_sc26xx_port *up = dev_id;
221 unsigned long flags;
222 bool push;
223 u8 isr;
224
225 spin_lock_irqsave(&up->port[0].lock, flags);
226
227 push = false;
228 isr = READ_SC(&up->port[0], ISR);
229 if (isr & ISR_TXRDYA)
230 transmit_chars(&up->port[0]);
231 if (isr & ISR_RXRDYA)
232 push = receive_chars(&up->port[0]);
233
234 spin_unlock(&up->port[0].lock);
235
236 if (push)
237 tty_flip_buffer_push(&up->port[0].state->port);
238
239 spin_lock(&up->port[1].lock);
240
241 push = false;
242 if (isr & ISR_TXRDYB)
243 transmit_chars(&up->port[1]);
244 if (isr & ISR_RXRDYB)
245 push = receive_chars(&up->port[1]);
246
247 spin_unlock_irqrestore(&up->port[1].lock, flags);
248
249 if (push)
250 tty_flip_buffer_push(&up->port[1].state->port);
251
252 return IRQ_HANDLED;
253}
254
255/* port->lock is not held. */
256static unsigned int sc26xx_tx_empty(struct uart_port *port)
257{
258 return (READ_SC_PORT(port, SR) & SR_TXRDY) ? TIOCSER_TEMT : 0;
259}
260
261/* port->lock held by caller. */
262static void sc26xx_set_mctrl(struct uart_port *port, unsigned int mctrl)
263{
264 struct uart_sc26xx_port *up;
265 int line = port->line;
266
267 port -= line;
268 up = container_of(port, struct uart_sc26xx_port, port[0]);
269
270 if (up->dtr_mask[line]) {
271 if (mctrl & TIOCM_DTR)
272 WRITE_SC(port, OPR_SET, up->dtr_mask[line]);
273 else
274 WRITE_SC(port, OPR_CLR, up->dtr_mask[line]);
275 }
276 if (up->rts_mask[line]) {
277 if (mctrl & TIOCM_RTS)
278 WRITE_SC(port, OPR_SET, up->rts_mask[line]);
279 else
280 WRITE_SC(port, OPR_CLR, up->rts_mask[line]);
281 }
282}
283
284/* port->lock is held by caller and interrupts are disabled. */
285static unsigned int sc26xx_get_mctrl(struct uart_port *port)
286{
287 struct uart_sc26xx_port *up;
288 int line = port->line;
289 unsigned int mctrl = TIOCM_DSR | TIOCM_CTS | TIOCM_CAR;
290 u8 ipr;
291
292 port -= line;
293 up = container_of(port, struct uart_sc26xx_port, port[0]);
294 ipr = READ_SC(port, IPR) ^ 0xff;
295
296 if (up->dsr_mask[line]) {
297 mctrl &= ~TIOCM_DSR;
298 mctrl |= ipr & up->dsr_mask[line] ? TIOCM_DSR : 0;
299 }
300 if (up->cts_mask[line]) {
301 mctrl &= ~TIOCM_CTS;
302 mctrl |= ipr & up->cts_mask[line] ? TIOCM_CTS : 0;
303 }
304 if (up->dcd_mask[line]) {
305 mctrl &= ~TIOCM_CAR;
306 mctrl |= ipr & up->dcd_mask[line] ? TIOCM_CAR : 0;
307 }
308 if (up->ri_mask[line]) {
309 mctrl &= ~TIOCM_RNG;
310 mctrl |= ipr & up->ri_mask[line] ? TIOCM_RNG : 0;
311 }
312 return mctrl;
313}
314
315/* port->lock held by caller. */
316static void sc26xx_stop_tx(struct uart_port *port)
317{
318 return;
319}
320
321/* port->lock held by caller. */
322static void sc26xx_start_tx(struct uart_port *port)
323{
324 struct circ_buf *xmit = &port->state->xmit;
325
326 while (!uart_circ_empty(xmit)) {
327 if (!(READ_SC_PORT(port, SR) & SR_TXRDY)) {
328 sc26xx_enable_irq(port, IMR_TXRDY);
329 break;
330 }
331 WRITE_SC_PORT(port, THR, xmit->buf[xmit->tail]);
332 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
333 port->icount.tx++;
334 }
335}
336
337/* port->lock held by caller. */
338static void sc26xx_stop_rx(struct uart_port *port)
339{
340}
341
342/* port->lock held by caller. */
343static void sc26xx_enable_ms(struct uart_port *port)
344{
345}
346
347/* port->lock is not held. */
348static void sc26xx_break_ctl(struct uart_port *port, int break_state)
349{
350 if (break_state == -1)
351 WRITE_SC_PORT(port, CR, CR_STRT_BRK);
352 else
353 WRITE_SC_PORT(port, CR, CR_STOP_BRK);
354}
355
356/* port->lock is not held. */
357static int sc26xx_startup(struct uart_port *port)
358{
359 sc26xx_disable_irq(port, IMR_TXRDY | IMR_RXRDY);
360 WRITE_SC(port, OPCR, 0);
361
362 /* reset tx and rx */
363 WRITE_SC_PORT(port, CR, CR_RES_RX);
364 WRITE_SC_PORT(port, CR, CR_RES_TX);
365
366 /* start rx/tx */
367 WRITE_SC_PORT(port, CR, CR_ENA_TX | CR_ENA_RX);
368
369 /* enable irqs */
370 sc26xx_enable_irq(port, IMR_RXRDY);
371 return 0;
372}
373
374/* port->lock is not held. */
375static void sc26xx_shutdown(struct uart_port *port)
376{
377 /* disable interrupst */
378 sc26xx_disable_irq(port, IMR_TXRDY | IMR_RXRDY);
379
380 /* stop tx/rx */
381 WRITE_SC_PORT(port, CR, CR_DIS_TX | CR_DIS_RX);
382}
383
384/* port->lock is not held. */
385static void sc26xx_set_termios(struct uart_port *port, struct ktermios *termios,
386 struct ktermios *old)
387{
388 unsigned int baud = uart_get_baud_rate(port, termios, old, 0, 4000000);
389 unsigned int quot = uart_get_divisor(port, baud);
390 unsigned int iflag, cflag;
391 unsigned long flags;
392 u8 mr1, mr2, csr;
393
394 spin_lock_irqsave(&port->lock, flags);
395
396 while ((READ_SC_PORT(port, SR) & ((1 << 3) | (1 << 2))) != 0xc)
397 udelay(2);
398
399 WRITE_SC_PORT(port, CR, CR_DIS_TX | CR_DIS_RX);
400
401 iflag = termios->c_iflag;
402 cflag = termios->c_cflag;
403
404 port->read_status_mask = SR_OVERRUN;
405 if (iflag & INPCK)
406 port->read_status_mask |= SR_PARITY | SR_FRAME;
407 if (iflag & (BRKINT | PARMRK))
408 port->read_status_mask |= SR_BREAK;
409
410 port->ignore_status_mask = 0;
411 if (iflag & IGNBRK)
412 port->ignore_status_mask |= SR_BREAK;
413 if ((cflag & CREAD) == 0)
414 port->ignore_status_mask |= SR_BREAK | SR_FRAME |
415 SR_PARITY | SR_OVERRUN;
416
417 switch (cflag & CSIZE) {
418 case CS5:
419 mr1 = 0x00;
420 break;
421 case CS6:
422 mr1 = 0x01;
423 break;
424 case CS7:
425 mr1 = 0x02;
426 break;
427 default:
428 case CS8:
429 mr1 = 0x03;
430 break;
431 }
432 mr2 = 0x07;
433 if (cflag & CSTOPB)
434 mr2 = 0x0f;
435 if (cflag & PARENB) {
436 if (cflag & PARODD)
437 mr1 |= (1 << 2);
438 } else
439 mr1 |= (2 << 3);
440
441 switch (baud) {
442 case 50:
443 csr = 0x00;
444 break;
445 case 110:
446 csr = 0x11;
447 break;
448 case 134:
449 csr = 0x22;
450 break;
451 case 200:
452 csr = 0x33;
453 break;
454 case 300:
455 csr = 0x44;
456 break;
457 case 600:
458 csr = 0x55;
459 break;
460 case 1200:
461 csr = 0x66;
462 break;
463 case 2400:
464 csr = 0x88;
465 break;
466 case 4800:
467 csr = 0x99;
468 break;
469 default:
470 case 9600:
471 csr = 0xbb;
472 break;
473 case 19200:
474 csr = 0xcc;
475 break;
476 }
477
478 WRITE_SC_PORT(port, CR, CR_RES_MR);
479 WRITE_SC_PORT(port, MRx, mr1);
480 WRITE_SC_PORT(port, MRx, mr2);
481
482 WRITE_SC(port, ACR, 0x80);
483 WRITE_SC_PORT(port, CSR, csr);
484
485 /* reset tx and rx */
486 WRITE_SC_PORT(port, CR, CR_RES_RX);
487 WRITE_SC_PORT(port, CR, CR_RES_TX);
488
489 WRITE_SC_PORT(port, CR, CR_ENA_TX | CR_ENA_RX);
490 while ((READ_SC_PORT(port, SR) & ((1 << 3) | (1 << 2))) != 0xc)
491 udelay(2);
492
493 /* XXX */
494 uart_update_timeout(port, cflag,
495 (port->uartclk / (16 * quot)));
496
497 spin_unlock_irqrestore(&port->lock, flags);
498}
499
500static const char *sc26xx_type(struct uart_port *port)
501{
502 return "SC26XX";
503}
504
505static void sc26xx_release_port(struct uart_port *port)
506{
507}
508
509static int sc26xx_request_port(struct uart_port *port)
510{
511 return 0;
512}
513
514static void sc26xx_config_port(struct uart_port *port, int flags)
515{
516}
517
518static int sc26xx_verify_port(struct uart_port *port, struct serial_struct *ser)
519{
520 return -EINVAL;
521}
522
523static struct uart_ops sc26xx_ops = {
524 .tx_empty = sc26xx_tx_empty,
525 .set_mctrl = sc26xx_set_mctrl,
526 .get_mctrl = sc26xx_get_mctrl,
527 .stop_tx = sc26xx_stop_tx,
528 .start_tx = sc26xx_start_tx,
529 .stop_rx = sc26xx_stop_rx,
530 .enable_ms = sc26xx_enable_ms,
531 .break_ctl = sc26xx_break_ctl,
532 .startup = sc26xx_startup,
533 .shutdown = sc26xx_shutdown,
534 .set_termios = sc26xx_set_termios,
535 .type = sc26xx_type,
536 .release_port = sc26xx_release_port,
537 .request_port = sc26xx_request_port,
538 .config_port = sc26xx_config_port,
539 .verify_port = sc26xx_verify_port,
540};
541
542static struct uart_port *sc26xx_port;
543
544#ifdef CONFIG_SERIAL_SC26XX_CONSOLE
545static void sc26xx_console_putchar(struct uart_port *port, char c)
546{
547 unsigned long flags;
548 int limit = 1000000;
549
550 spin_lock_irqsave(&port->lock, flags);
551
552 while (limit-- > 0) {
553 if (READ_SC_PORT(port, SR) & SR_TXRDY) {
554 WRITE_SC_PORT(port, THR, c);
555 break;
556 }
557 udelay(2);
558 }
559
560 spin_unlock_irqrestore(&port->lock, flags);
561}
562
563static void sc26xx_console_write(struct console *con, const char *s, unsigned n)
564{
565 struct uart_port *port = sc26xx_port;
566 int i;
567
568 for (i = 0; i < n; i++) {
569 if (*s == '\n')
570 sc26xx_console_putchar(port, '\r');
571 sc26xx_console_putchar(port, *s++);
572 }
573}
574
575static int __init sc26xx_console_setup(struct console *con, char *options)
576{
577 struct uart_port *port = sc26xx_port;
578 int baud = 9600;
579 int bits = 8;
580 int parity = 'n';
581 int flow = 'n';
582
583 if (port->type != PORT_SC26XX)
584 return -1;
585
586 printk(KERN_INFO "Console: ttySC%d (SC26XX)\n", con->index);
587 if (options)
588 uart_parse_options(options, &baud, &parity, &bits, &flow);
589
590 return uart_set_options(port, con, baud, parity, bits, flow);
591}
592
593static struct uart_driver sc26xx_reg;
594static struct console sc26xx_console = {
595 .name = "ttySC",
596 .write = sc26xx_console_write,
597 .device = uart_console_device,
598 .setup = sc26xx_console_setup,
599 .flags = CON_PRINTBUFFER,
600 .index = -1,
601 .data = &sc26xx_reg,
602};
603#define SC26XX_CONSOLE &sc26xx_console
604#else
605#define SC26XX_CONSOLE NULL
606#endif
607
608static struct uart_driver sc26xx_reg = {
609 .owner = THIS_MODULE,
610 .driver_name = "SC26xx",
611 .dev_name = "ttySC",
612 .major = SC26XX_MAJOR,
613 .minor = SC26XX_MINOR_START,
614 .nr = SC26XX_NR,
615 .cons = SC26XX_CONSOLE,
616};
617
618static u8 sc26xx_flags2mask(unsigned int flags, unsigned int bitpos)
619{
620 unsigned int bit = (flags >> bitpos) & 15;
621
622 return bit ? (1 << (bit - 1)) : 0;
623}
624
625static void sc26xx_init_masks(struct uart_sc26xx_port *up,
626 int line, unsigned int data)
627{
628 up->dtr_mask[line] = sc26xx_flags2mask(data, 0);
629 up->rts_mask[line] = sc26xx_flags2mask(data, 4);
630 up->dsr_mask[line] = sc26xx_flags2mask(data, 8);
631 up->cts_mask[line] = sc26xx_flags2mask(data, 12);
632 up->dcd_mask[line] = sc26xx_flags2mask(data, 16);
633 up->ri_mask[line] = sc26xx_flags2mask(data, 20);
634}
635
636static int sc26xx_probe(struct platform_device *dev)
637{
638 struct resource *res;
639 struct uart_sc26xx_port *up;
640 unsigned int *sc26xx_data = dev_get_platdata(&dev->dev);
641 int err;
642
643 res = platform_get_resource(dev, IORESOURCE_MEM, 0);
644 if (!res)
645 return -ENODEV;
646
647 up = kzalloc(sizeof *up, GFP_KERNEL);
648 if (unlikely(!up))
649 return -ENOMEM;
650
651 up->port[0].line = 0;
652 up->port[0].ops = &sc26xx_ops;
653 up->port[0].type = PORT_SC26XX;
654 up->port[0].uartclk = (29491200 / 16); /* arbitrary */
655
656 up->port[0].mapbase = res->start;
657 up->port[0].membase = ioremap_nocache(up->port[0].mapbase, 0x40);
658 up->port[0].iotype = UPIO_MEM;
659 up->port[0].irq = platform_get_irq(dev, 0);
660
661 up->port[0].dev = &dev->dev;
662
663 sc26xx_init_masks(up, 0, sc26xx_data[0]);
664
665 sc26xx_port = &up->port[0];
666
667 up->port[1].line = 1;
668 up->port[1].ops = &sc26xx_ops;
669 up->port[1].type = PORT_SC26XX;
670 up->port[1].uartclk = (29491200 / 16); /* arbitrary */
671
672 up->port[1].mapbase = up->port[0].mapbase;
673 up->port[1].membase = up->port[0].membase;
674 up->port[1].iotype = UPIO_MEM;
675 up->port[1].irq = up->port[0].irq;
676
677 up->port[1].dev = &dev->dev;
678
679 sc26xx_init_masks(up, 1, sc26xx_data[1]);
680
681 err = uart_register_driver(&sc26xx_reg);
682 if (err)
683 goto out_free_port;
684
685 sc26xx_reg.tty_driver->name_base = sc26xx_reg.minor;
686
687 err = uart_add_one_port(&sc26xx_reg, &up->port[0]);
688 if (err)
689 goto out_unregister_driver;
690
691 err = uart_add_one_port(&sc26xx_reg, &up->port[1]);
692 if (err)
693 goto out_remove_port0;
694
695 err = request_irq(up->port[0].irq, sc26xx_interrupt, 0, "sc26xx", up);
696 if (err)
697 goto out_remove_ports;
698
699 platform_set_drvdata(dev, up);
700 return 0;
701
702out_remove_ports:
703 uart_remove_one_port(&sc26xx_reg, &up->port[1]);
704out_remove_port0:
705 uart_remove_one_port(&sc26xx_reg, &up->port[0]);
706
707out_unregister_driver:
708 uart_unregister_driver(&sc26xx_reg);
709
710out_free_port:
711 kfree(up);
712 sc26xx_port = NULL;
713 return err;
714}
715
716
717static int __exit sc26xx_driver_remove(struct platform_device *dev)
718{
719 struct uart_sc26xx_port *up = platform_get_drvdata(dev);
720
721 free_irq(up->port[0].irq, up);
722
723 uart_remove_one_port(&sc26xx_reg, &up->port[0]);
724 uart_remove_one_port(&sc26xx_reg, &up->port[1]);
725
726 uart_unregister_driver(&sc26xx_reg);
727
728 kfree(up);
729 sc26xx_port = NULL;
730
731 return 0;
732}
733
734static struct platform_driver sc26xx_driver = {
735 .probe = sc26xx_probe,
736 .remove = sc26xx_driver_remove,
737 .driver = {
738 .name = "SC26xx",
739 .owner = THIS_MODULE,
740 },
741};
742
743module_platform_driver(sc26xx_driver);
744
745MODULE_AUTHOR("Thomas Bogendörfer");
746MODULE_DESCRIPTION("SC681/SC2692 serial driver");
747MODULE_VERSION("1.0");
748MODULE_LICENSE("GPL");
749MODULE_ALIAS("platform:SC26xx");
generated by cgit v1.2.2 (git 2.25.0) at 2025-01-18 05:25:38 -0500