Fix common misspellings

Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>

9 files changed, 17 insertions, 17 deletions

diff --git a/drivers/spi/amba-pl022.c b/drivers/spi/amba-pl022.c
index 5a4e0afb9ad6..5825370bad25 100644
--- a/drivers/spi/amba-pl022.c
+++ b/drivers/spi/amba-pl022.c
@@ -661,7 +661,7 @@ static void readwriter(struct pl022 *pl022)
 {
 
         /*
-         * The FIFO depth is different inbetween primecell variants.
+         * The FIFO depth is different between primecell variants.
          * I believe filling in too much in the FIFO might cause
          * errons in 8bit wide transfers on ARM variants (just 8 words
          * FIFO, means only 8x8 = 64 bits in FIFO) at least.
@@ -722,7 +722,7 @@ static void readwriter(struct pl022 *pl022)
                  * This inner reader takes care of things appearing in the RX
                  * FIFO as we're transmitting. This will happen a lot since the
                  * clock starts running when you put things into the TX FIFO,
-                 * and then things are continously clocked into the RX FIFO.
+                 * and then things are continuously clocked into the RX FIFO.
                  */
                 while ((readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_RNE)
                        && (pl022->rx < pl022->rx_end)) {
@@ -842,7 +842,7 @@ static void dma_callback(void *data)
 
         unmap_free_dma_scatter(pl022);
 
-        /* Update total bytes transfered */
+        /* Update total bytes transferred */
         msg->actual_length += pl022->cur_transfer->len;
         if (pl022->cur_transfer->cs_change)
                 pl022->cur_chip->
@@ -1224,7 +1224,7 @@ static irqreturn_t pl022_interrupt_handler(int irq, void *dev_id)
                                  "number of bytes on a 16bit bus?)\n",
                                  (u32) (pl022->rx - pl022->rx_end));
                 }
-                /* Update total bytes transfered */
+                /* Update total bytes transferred */
                 msg->actual_length += pl022->cur_transfer->len;
                 if (pl022->cur_transfer->cs_change)
                         pl022->cur_chip->
@@ -1415,11 +1415,11 @@ static void do_polling_transfer(struct pl022 *pl022)
                        SSP_CR1(pl022->virtbase));
 
                 dev_dbg(&pl022->adev->dev, "polling transfer ongoing ...\n");
-                /* FIXME: insert a timeout so we don't hang here indefinately */
+                /* FIXME: insert a timeout so we don't hang here indefinitely */
                 while (pl022->tx < pl022->tx_end || pl022->rx < pl022->rx_end)
                         readwriter(pl022);
 
-                /* Update total byte transfered */
+                /* Update total byte transferred */
                 message->actual_length += pl022->cur_transfer->len;
                 if (pl022->cur_transfer->cs_change)
                         pl022->cur_chip->cs_control(SSP_CHIP_DESELECT);
@@ -2129,7 +2129,7 @@ pl022_probe(struct amba_device *adev, const struct amba_id *id)
                         "probe - problem registering spi master\n");
                 goto err_spi_register;
         }
-        dev_dbg(dev, "probe succeded\n");
+        dev_dbg(dev, "probe succeeded\n");
         /*
          * Disable the silicon block pclk and any voltage domain and just
          * power it up and clock it when it's needed
@@ -2184,7 +2184,7 @@ pl022_remove(struct amba_device *adev)
         spi_unregister_master(pl022->master);
         spi_master_put(pl022->master);
         amba_set_drvdata(adev, NULL);
-        dev_dbg(&adev->dev, "remove succeded\n");
+        dev_dbg(&adev->dev, "remove succeeded\n");
         return 0;
 }
 
diff --git a/drivers/spi/au1550_spi.c b/drivers/spi/au1550_spi.c
index 3c9ade69643f..b50563d320e1 100644
--- a/drivers/spi/au1550_spi.c
+++ b/drivers/spi/au1550_spi.c
@@ -480,7 +480,7 @@ static irqreturn_t au1550_spi_dma_irq_callback(struct au1550_spi *hw)
                 au1xxx_dbdma_stop(hw->dma_rx_ch);
                 au1xxx_dbdma_stop(hw->dma_tx_ch);
 
-                /* get number of transfered bytes */
+                /* get number of transferred bytes */
                 hw->rx_count = hw->len - au1xxx_get_dma_residue(hw->dma_rx_ch);
                 hw->tx_count = hw->len - au1xxx_get_dma_residue(hw->dma_tx_ch);
 
diff --git a/drivers/spi/dw_spi.c b/drivers/spi/dw_spi.c
index 9a6196461b27..b1a4b9f503ae 100644
--- a/drivers/spi/dw_spi.c
+++ b/drivers/spi/dw_spi.c
@@ -345,7 +345,7 @@ static void int_error_stop(struct dw_spi *dws, const char *msg)
 
 void dw_spi_xfer_done(struct dw_spi *dws)
 {
-        /* Update total byte transfered return count actual bytes read */
+        /* Update total byte transferred return count actual bytes read */
         dws->cur_msg->actual_length += dws->len;
 
         /* Move to next transfer */
diff --git a/drivers/spi/dw_spi.h b/drivers/spi/dw_spi.h
index fb0bce564844..b23e452adaf7 100644
--- a/drivers/spi/dw_spi.h
+++ b/drivers/spi/dw_spi.h
@@ -46,7 +46,7 @@
 #define SPI_INT_RXFI                    (1 << 4)
 #define SPI_INT_MSTI                    (1 << 5)
 
-/* TX RX interrupt level threshhold, max can be 256 */
+/* TX RX interrupt level threshold, max can be 256 */
 #define SPI_INT_THRESHOLD               32
 
 enum dw_ssi_type {
diff --git a/drivers/spi/ep93xx_spi.c b/drivers/spi/ep93xx_spi.c
index 0ba35df9a6df..d3570071e98f 100644
--- a/drivers/spi/ep93xx_spi.c
+++ b/drivers/spi/ep93xx_spi.c
@@ -512,7 +512,7 @@ static int ep93xx_spi_read_write(struct ep93xx_spi *espi)
  *
  * This function processes one SPI transfer given in @t. Function waits until
  * transfer is complete (may sleep) and updates @msg->status based on whether
- * transfer was succesfully processed or not.
+ * transfer was successfully processed or not.
  */
 static void ep93xx_spi_process_transfer(struct ep93xx_spi *espi,
                                         struct spi_message *msg,
diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c
index a429b01d0285..9c74aad6be93 100644
--- a/drivers/spi/pxa2xx_spi.c
+++ b/drivers/spi/pxa2xx_spi.c
@@ -700,7 +700,7 @@ static void int_transfer_complete(struct driver_data *drv_data)
         if (!pxa25x_ssp_comp(drv_data))
                 write_SSTO(0, reg);
 
-        /* Update total byte transfered return count actual bytes read */
+        /* Update total byte transferred return count actual bytes read */
         drv_data->cur_msg->actual_length += drv_data->len -
                                 (drv_data->rx_end - drv_data->rx);
 
@@ -759,7 +759,7 @@ static irqreturn_t interrupt_transfer(struct driver_data *drv_data)
 
                 /*
                  * PXA25x_SSP has no timeout, set up rx threshould for the
-                 * remaing RX bytes.
+                 * remaining RX bytes.
                  */
                 if (pxa25x_ssp_comp(drv_data)) {
 
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 34bb17f03019..82b9a428c323 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -957,7 +957,7 @@ EXPORT_SYMBOL_GPL(spi_sync);
  * drivers may DMA directly into and out of the message buffers.
  *
  * This call should be used by drivers that require exclusive access to the
- * SPI bus. It has to be preceeded by a spi_bus_lock call. The SPI bus must
+ * SPI bus. It has to be preceded by a spi_bus_lock call. The SPI bus must
  * be released by a spi_bus_unlock call when the exclusive access is over.
  *
  * It returns zero on success, else a negative error code.
diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c
index a28462486df8..bdb7289a1d22 100644
--- a/drivers/spi/spi_bfin5xx.c
+++ b/drivers/spi/spi_bfin5xx.c
@@ -905,7 +905,7 @@ static void bfin_spi_pump_transfers(unsigned long data)
                         "IO write error!\n");
                 message->state = ERROR_STATE;
         } else {
-                /* Update total byte transfered */
+                /* Update total byte transferred */
                 message->actual_length += drv_data->len_in_bytes;
                 /* Move to next transfer of this msg */
                 message->state = bfin_spi_next_transfer(drv_data);
diff --git a/drivers/spi/spi_fsl_espi.c b/drivers/spi/spi_fsl_espi.c
index 900e921ab80e..496f895a0024 100644
--- a/drivers/spi/spi_fsl_espi.c
+++ b/drivers/spi/spi_fsl_espi.c
@@ -474,7 +474,7 @@ static int fsl_espi_setup(struct spi_device *spi)
         mpc8xxx_spi = spi_master_get_devdata(spi->master);
         reg_base = mpc8xxx_spi->reg_base;
 
-        hw_mode = cs->hw_mode; /* Save orginal settings */
+        hw_mode = cs->hw_mode; /* Save original settings */
         cs->hw_mode = mpc8xxx_spi_read_reg(
                         &reg_base->csmode[spi->chip_select]);
         /* mask out bits we are going to set */