aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/spi
diff options
context:
space:
mode:
authorWu, Bryan <bryan.wu@analog.com>2007-05-06 17:50:34 -0400
committerLinus Torvalds <torvalds@woody.linux-foundation.org>2007-05-07 15:12:58 -0400
commita5f6abd4f7558fea97bc4021fd0eb7dcc5d16a77 (patch)
treed4e8734dd087711e46074846e481457953685586 /drivers/spi
parent8cc75c9a1498913d668b6d3559940c6837cee8bf (diff)
Blackfin: blackfin on-chip SPI controller driver
This patch implements the driver necessary use the Analog Devices Blackfin processor's SPI Port. Signed-off-by: Bryan Wu <bryan.wu@analog.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Diffstat (limited to 'drivers/spi')
-rw-r--r--drivers/spi/Kconfig7
-rw-r--r--drivers/spi/Makefile3
-rw-r--r--drivers/spi/spi_bfin5xx.c1313
3 files changed, 1321 insertions, 2 deletions
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 7e54e48efd5c..4a012d9acbff 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -58,6 +58,12 @@ config SPI_ATMEL
58 This selects a driver for the Atmel SPI Controller, present on 58 This selects a driver for the Atmel SPI Controller, present on
59 many AT32 (AVR32) and AT91 (ARM) chips. 59 many AT32 (AVR32) and AT91 (ARM) chips.
60 60
61config SPI_BFIN
62 tristate "SPI controller driver for ADI Blackfin5xx"
63 depends on SPI_MASTER && BFIN
64 help
65 This is the SPI controller master driver for Blackfin 5xx processor.
66
61config SPI_BITBANG 67config SPI_BITBANG
62 tristate "Bitbanging SPI master" 68 tristate "Bitbanging SPI master"
63 depends on SPI_MASTER && EXPERIMENTAL 69 depends on SPI_MASTER && EXPERIMENTAL
@@ -157,7 +163,6 @@ config SPI_AT25
157# Add new SPI protocol masters in alphabetical order above this line 163# Add new SPI protocol masters in alphabetical order above this line
158# 164#
159 165
160
161# (slave support would go here) 166# (slave support would go here)
162 167
163endmenu # "SPI support" 168endmenu # "SPI support"
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 3c280ad89202..a95ade857a2f 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -11,8 +11,9 @@ endif
11obj-$(CONFIG_SPI_MASTER) += spi.o 11obj-$(CONFIG_SPI_MASTER) += spi.o
12 12
13# SPI master controller drivers (bus) 13# SPI master controller drivers (bus)
14obj-$(CONFIG_SPI_BITBANG) += spi_bitbang.o
15obj-$(CONFIG_SPI_ATMEL) += atmel_spi.o 14obj-$(CONFIG_SPI_ATMEL) += atmel_spi.o
15obj-$(CONFIG_SPI_BFIN) += spi_bfin5xx.o
16obj-$(CONFIG_SPI_BITBANG) += spi_bitbang.o
16obj-$(CONFIG_SPI_BUTTERFLY) += spi_butterfly.o 17obj-$(CONFIG_SPI_BUTTERFLY) += spi_butterfly.o
17obj-$(CONFIG_SPI_IMX) += spi_imx.o 18obj-$(CONFIG_SPI_IMX) += spi_imx.o
18obj-$(CONFIG_SPI_PXA2XX) += pxa2xx_spi.o 19obj-$(CONFIG_SPI_PXA2XX) += pxa2xx_spi.o
diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c
new file mode 100644
index 000000000000..ce3c0ce2316e
--- /dev/null
+++ b/drivers/spi/spi_bfin5xx.c
@@ -0,0 +1,1313 @@
1/*
2 * File: drivers/spi/bfin5xx_spi.c
3 * Based on: N/A
4 * Author: Luke Yang (Analog Devices Inc.)
5 *
6 * Created: March. 10th 2006
7 * Description: SPI controller driver for Blackfin 5xx
8 * Bugs: Enter bugs at http://blackfin.uclinux.org/
9 *
10 * Modified:
11 * March 10, 2006 bfin5xx_spi.c Created. (Luke Yang)
12 * August 7, 2006 added full duplex mode (Axel Weiss & Luke Yang)
13 *
14 * Copyright 2004-2006 Analog Devices Inc.
15 *
16 * This program is free software ; you can redistribute it and/or modify
17 * it under the terms of the GNU General Public License as published by
18 * the Free Software Foundation ; either version 2, or (at your option)
19 * any later version.
20 *
21 * This program is distributed in the hope that it will be useful,
22 * but WITHOUT ANY WARRANTY ; without even the implied warranty of
23 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
24 * GNU General Public License for more details.
25 *
26 * You should have received a copy of the GNU General Public License
27 * along with this program ; see the file COPYING.
28 * If not, write to the Free Software Foundation,
29 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
30 */
31
32#include <linux/init.h>
33#include <linux/module.h>
34#include <linux/device.h>
35#include <linux/ioport.h>
36#include <linux/errno.h>
37#include <linux/interrupt.h>
38#include <linux/platform_device.h>
39#include <linux/dma-mapping.h>
40#include <linux/spi/spi.h>
41#include <linux/workqueue.h>
42#include <linux/errno.h>
43#include <linux/delay.h>
44
45#include <asm/io.h>
46#include <asm/irq.h>
47#include <asm/delay.h>
48#include <asm/dma.h>
49
50#include <asm/bfin5xx_spi.h>
51
52MODULE_AUTHOR("Luke Yang");
53MODULE_DESCRIPTION("Blackfin 5xx SPI Contoller");
54MODULE_LICENSE("GPL");
55
56#define IS_DMA_ALIGNED(x) (((u32)(x)&0x07)==0)
57
58#define DEFINE_SPI_REG(reg, off) \
59static inline u16 read_##reg(void) \
60 { return *(volatile unsigned short*)(SPI0_REGBASE + off); } \
61static inline void write_##reg(u16 v) \
62 {*(volatile unsigned short*)(SPI0_REGBASE + off) = v;\
63 SSYNC();}
64
65DEFINE_SPI_REG(CTRL, 0x00)
66DEFINE_SPI_REG(FLAG, 0x04)
67DEFINE_SPI_REG(STAT, 0x08)
68DEFINE_SPI_REG(TDBR, 0x0C)
69DEFINE_SPI_REG(RDBR, 0x10)
70DEFINE_SPI_REG(BAUD, 0x14)
71DEFINE_SPI_REG(SHAW, 0x18)
72#define START_STATE ((void*)0)
73#define RUNNING_STATE ((void*)1)
74#define DONE_STATE ((void*)2)
75#define ERROR_STATE ((void*)-1)
76#define QUEUE_RUNNING 0
77#define QUEUE_STOPPED 1
78int dma_requested;
79
80struct driver_data {
81 /* Driver model hookup */
82 struct platform_device *pdev;
83
84 /* SPI framework hookup */
85 struct spi_master *master;
86
87 /* BFIN hookup */
88 struct bfin5xx_spi_master *master_info;
89
90 /* Driver message queue */
91 struct workqueue_struct *workqueue;
92 struct work_struct pump_messages;
93 spinlock_t lock;
94 struct list_head queue;
95 int busy;
96 int run;
97
98 /* Message Transfer pump */
99 struct tasklet_struct pump_transfers;
100
101 /* Current message transfer state info */
102 struct spi_message *cur_msg;
103 struct spi_transfer *cur_transfer;
104 struct chip_data *cur_chip;
105 size_t len_in_bytes;
106 size_t len;
107 void *tx;
108 void *tx_end;
109 void *rx;
110 void *rx_end;
111 int dma_mapped;
112 dma_addr_t rx_dma;
113 dma_addr_t tx_dma;
114 size_t rx_map_len;
115 size_t tx_map_len;
116 u8 n_bytes;
117 void (*write) (struct driver_data *);
118 void (*read) (struct driver_data *);
119 void (*duplex) (struct driver_data *);
120};
121
122struct chip_data {
123 u16 ctl_reg;
124 u16 baud;
125 u16 flag;
126
127 u8 chip_select_num;
128 u8 n_bytes;
129 u32 width; /* 0 or 1 */
130 u8 enable_dma;
131 u8 bits_per_word; /* 8 or 16 */
132 u8 cs_change_per_word;
133 u8 cs_chg_udelay;
134 void (*write) (struct driver_data *);
135 void (*read) (struct driver_data *);
136 void (*duplex) (struct driver_data *);
137};
138
139void bfin_spi_enable(struct driver_data *drv_data)
140{
141 u16 cr;
142
143 cr = read_CTRL();
144 write_CTRL(cr | BIT_CTL_ENABLE);
145 SSYNC();
146}
147
148void bfin_spi_disable(struct driver_data *drv_data)
149{
150 u16 cr;
151
152 cr = read_CTRL();
153 write_CTRL(cr & (~BIT_CTL_ENABLE));
154 SSYNC();
155}
156
157/* Caculate the SPI_BAUD register value based on input HZ */
158static u16 hz_to_spi_baud(u32 speed_hz)
159{
160 u_long sclk = get_sclk();
161 u16 spi_baud = (sclk / (2 * speed_hz));
162
163 if ((sclk % (2 * speed_hz)) > 0)
164 spi_baud++;
165
166 pr_debug("sclk = %ld, speed_hz = %d, spi_baud = %d\n", sclk, speed_hz,
167 spi_baud);
168
169 return spi_baud;
170}
171
172static int flush(struct driver_data *drv_data)
173{
174 unsigned long limit = loops_per_jiffy << 1;
175
176 /* wait for stop and clear stat */
177 while (!(read_STAT() & BIT_STAT_SPIF) && limit--)
178 continue;
179
180 write_STAT(BIT_STAT_CLR);
181
182 return limit;
183}
184
185/* stop controller and re-config current chip*/
186static void restore_state(struct driver_data *drv_data)
187{
188 struct chip_data *chip = drv_data->cur_chip;
189
190 /* Clear status and disable clock */
191 write_STAT(BIT_STAT_CLR);
192 bfin_spi_disable(drv_data);
193 pr_debug("restoring spi ctl state\n");
194
195#if defined(CONFIG_BF534) || defined(CONFIG_BF536) || defined(CONFIG_BF537)
196 pr_debug("chip select number is %d\n", chip->chip_select_num);
197
198 switch (chip->chip_select_num) {
199 case 1:
200 bfin_write_PORTF_FER(bfin_read_PORTF_FER() | 0x3c00);
201 SSYNC();
202 break;
203
204 case 2:
205 case 3:
206 bfin_write_PORT_MUX(bfin_read_PORT_MUX() | PJSE_SPI);
207 SSYNC();
208 bfin_write_PORTF_FER(bfin_read_PORTF_FER() | 0x3800);
209 SSYNC();
210 break;
211
212 case 4:
213 bfin_write_PORT_MUX(bfin_read_PORT_MUX() | PFS4E_SPI);
214 SSYNC();
215 bfin_write_PORTF_FER(bfin_read_PORTF_FER() | 0x3840);
216 SSYNC();
217 break;
218
219 case 5:
220 bfin_write_PORT_MUX(bfin_read_PORT_MUX() | PFS5E_SPI);
221 SSYNC();
222 bfin_write_PORTF_FER(bfin_read_PORTF_FER() | 0x3820);
223 SSYNC();
224 break;
225
226 case 6:
227 bfin_write_PORT_MUX(bfin_read_PORT_MUX() | PFS6E_SPI);
228 SSYNC();
229 bfin_write_PORTF_FER(bfin_read_PORTF_FER() | 0x3810);
230 SSYNC();
231 break;
232
233 case 7:
234 bfin_write_PORT_MUX(bfin_read_PORT_MUX() | PJCE_SPI);
235 SSYNC();
236 bfin_write_PORTF_FER(bfin_read_PORTF_FER() | 0x3800);
237 SSYNC();
238 break;
239 }
240#endif
241
242 /* Load the registers */
243 write_CTRL(chip->ctl_reg);
244 write_BAUD(chip->baud);
245 write_FLAG(chip->flag);
246}
247
248/* used to kick off transfer in rx mode */
249static unsigned short dummy_read(void)
250{
251 unsigned short tmp;
252 tmp = read_RDBR();
253 return tmp;
254}
255
256static void null_writer(struct driver_data *drv_data)
257{
258 u8 n_bytes = drv_data->n_bytes;
259
260 while (drv_data->tx < drv_data->tx_end) {
261 write_TDBR(0);
262 while ((read_STAT() & BIT_STAT_TXS))
263 continue;
264 drv_data->tx += n_bytes;
265 }
266}
267
268static void null_reader(struct driver_data *drv_data)
269{
270 u8 n_bytes = drv_data->n_bytes;
271 dummy_read();
272
273 while (drv_data->rx < drv_data->rx_end) {
274 while (!(read_STAT() & BIT_STAT_RXS))
275 continue;
276 dummy_read();
277 drv_data->rx += n_bytes;
278 }
279}
280
281static void u8_writer(struct driver_data *drv_data)
282{
283 pr_debug("cr8-s is 0x%x\n", read_STAT());
284 while (drv_data->tx < drv_data->tx_end) {
285 write_TDBR(*(u8 *) (drv_data->tx));
286 while (read_STAT() & BIT_STAT_TXS)
287 continue;
288 ++drv_data->tx;
289 }
290
291 /* poll for SPI completion before returning */
292 while (!(read_STAT() & BIT_STAT_SPIF))
293 continue;
294}
295
296static void u8_cs_chg_writer(struct driver_data *drv_data)
297{
298 struct chip_data *chip = drv_data->cur_chip;
299
300 while (drv_data->tx < drv_data->tx_end) {
301 write_FLAG(chip->flag);
302 SSYNC();
303
304 write_TDBR(*(u8 *) (drv_data->tx));
305 while (read_STAT() & BIT_STAT_TXS)
306 continue;
307 while (!(read_STAT() & BIT_STAT_SPIF))
308 continue;
309 write_FLAG(0xFF00 | chip->flag);
310 SSYNC();
311 if (chip->cs_chg_udelay)
312 udelay(chip->cs_chg_udelay);
313 ++drv_data->tx;
314 }
315 write_FLAG(0xFF00);
316 SSYNC();
317}
318
319static void u8_reader(struct driver_data *drv_data)
320{
321 pr_debug("cr-8 is 0x%x\n", read_STAT());
322
323 /* clear TDBR buffer before read(else it will be shifted out) */
324 write_TDBR(0xFFFF);
325
326 dummy_read();
327
328 while (drv_data->rx < drv_data->rx_end - 1) {
329 while (!(read_STAT() & BIT_STAT_RXS))
330 continue;
331 *(u8 *) (drv_data->rx) = read_RDBR();
332 ++drv_data->rx;
333 }
334
335 while (!(read_STAT() & BIT_STAT_RXS))
336 continue;
337 *(u8 *) (drv_data->rx) = read_SHAW();
338 ++drv_data->rx;
339}
340
341static void u8_cs_chg_reader(struct driver_data *drv_data)
342{
343 struct chip_data *chip = drv_data->cur_chip;
344
345 while (drv_data->rx < drv_data->rx_end) {
346 write_FLAG(chip->flag);
347 SSYNC();
348
349 read_RDBR(); /* kick off */
350 while (!(read_STAT() & BIT_STAT_RXS))
351 continue;
352 while (!(read_STAT() & BIT_STAT_SPIF))
353 continue;
354 *(u8 *) (drv_data->rx) = read_SHAW();
355 write_FLAG(0xFF00 | chip->flag);
356 SSYNC();
357 if (chip->cs_chg_udelay)
358 udelay(chip->cs_chg_udelay);
359 ++drv_data->rx;
360 }
361 write_FLAG(0xFF00);
362 SSYNC();
363}
364
365static void u8_duplex(struct driver_data *drv_data)
366{
367 /* in duplex mode, clk is triggered by writing of TDBR */
368 while (drv_data->rx < drv_data->rx_end) {
369 write_TDBR(*(u8 *) (drv_data->tx));
370 while (!(read_STAT() & BIT_STAT_SPIF))
371 continue;
372 while (!(read_STAT() & BIT_STAT_RXS))
373 continue;
374 *(u8 *) (drv_data->rx) = read_RDBR();
375 ++drv_data->rx;
376 ++drv_data->tx;
377 }
378}
379
380static void u8_cs_chg_duplex(struct driver_data *drv_data)
381{
382 struct chip_data *chip = drv_data->cur_chip;
383
384 while (drv_data->rx < drv_data->rx_end) {
385 write_FLAG(chip->flag);
386 SSYNC();
387
388 write_TDBR(*(u8 *) (drv_data->tx));
389 while (!(read_STAT() & BIT_STAT_SPIF))
390 continue;
391 while (!(read_STAT() & BIT_STAT_RXS))
392 continue;
393 *(u8 *) (drv_data->rx) = read_RDBR();
394 write_FLAG(0xFF00 | chip->flag);
395 SSYNC();
396 if (chip->cs_chg_udelay)
397 udelay(chip->cs_chg_udelay);
398 ++drv_data->rx;
399 ++drv_data->tx;
400 }
401 write_FLAG(0xFF00);
402 SSYNC();
403}
404
405static void u16_writer(struct driver_data *drv_data)
406{
407 pr_debug("cr16 is 0x%x\n", read_STAT());
408 while (drv_data->tx < drv_data->tx_end) {
409 write_TDBR(*(u16 *) (drv_data->tx));
410 while ((read_STAT() & BIT_STAT_TXS))
411 continue;
412 drv_data->tx += 2;
413 }
414
415 /* poll for SPI completion before returning */
416 while (!(read_STAT() & BIT_STAT_SPIF))
417 continue;
418}
419
420static void u16_cs_chg_writer(struct driver_data *drv_data)
421{
422 struct chip_data *chip = drv_data->cur_chip;
423
424 while (drv_data->tx < drv_data->tx_end) {
425 write_FLAG(chip->flag);
426 SSYNC();
427
428 write_TDBR(*(u16 *) (drv_data->tx));
429 while ((read_STAT() & BIT_STAT_TXS))
430 continue;
431 while (!(read_STAT() & BIT_STAT_SPIF))
432 continue;
433 write_FLAG(0xFF00 | chip->flag);
434 SSYNC();
435 if (chip->cs_chg_udelay)
436 udelay(chip->cs_chg_udelay);
437 drv_data->tx += 2;
438 }
439 write_FLAG(0xFF00);
440 SSYNC();
441}
442
443static void u16_reader(struct driver_data *drv_data)
444{
445 pr_debug("cr-16 is 0x%x\n", read_STAT());
446 dummy_read();
447
448 while (drv_data->rx < (drv_data->rx_end - 2)) {
449 while (!(read_STAT() & BIT_STAT_RXS))
450 continue;
451 *(u16 *) (drv_data->rx) = read_RDBR();
452 drv_data->rx += 2;
453 }
454
455 while (!(read_STAT() & BIT_STAT_RXS))
456 continue;
457 *(u16 *) (drv_data->rx) = read_SHAW();
458 drv_data->rx += 2;
459}
460
461static void u16_cs_chg_reader(struct driver_data *drv_data)
462{
463 struct chip_data *chip = drv_data->cur_chip;
464
465 while (drv_data->rx < drv_data->rx_end) {
466 write_FLAG(chip->flag);
467 SSYNC();
468
469 read_RDBR(); /* kick off */
470 while (!(read_STAT() & BIT_STAT_RXS))
471 continue;
472 while (!(read_STAT() & BIT_STAT_SPIF))
473 continue;
474 *(u16 *) (drv_data->rx) = read_SHAW();
475 write_FLAG(0xFF00 | chip->flag);
476 SSYNC();
477 if (chip->cs_chg_udelay)
478 udelay(chip->cs_chg_udelay);
479 drv_data->rx += 2;
480 }
481 write_FLAG(0xFF00);
482 SSYNC();
483}
484
485static void u16_duplex(struct driver_data *drv_data)
486{
487 /* in duplex mode, clk is triggered by writing of TDBR */
488 while (drv_data->tx < drv_data->tx_end) {
489 write_TDBR(*(u16 *) (drv_data->tx));
490 while (!(read_STAT() & BIT_STAT_SPIF))
491 continue;
492 while (!(read_STAT() & BIT_STAT_RXS))
493 continue;
494 *(u16 *) (drv_data->rx) = read_RDBR();
495 drv_data->rx += 2;
496 drv_data->tx += 2;
497 }
498}
499
500static void u16_cs_chg_duplex(struct driver_data *drv_data)
501{
502 struct chip_data *chip = drv_data->cur_chip;
503
504 while (drv_data->tx < drv_data->tx_end) {
505 write_FLAG(chip->flag);
506 SSYNC();
507
508 write_TDBR(*(u16 *) (drv_data->tx));
509 while (!(read_STAT() & BIT_STAT_SPIF))
510 continue;
511 while (!(read_STAT() & BIT_STAT_RXS))
512 continue;
513 *(u16 *) (drv_data->rx) = read_RDBR();
514 write_FLAG(0xFF00 | chip->flag);
515 SSYNC();
516 if (chip->cs_chg_udelay)
517 udelay(chip->cs_chg_udelay);
518 drv_data->rx += 2;
519 drv_data->tx += 2;
520 }
521 write_FLAG(0xFF00);
522 SSYNC();
523}
524
525/* test if ther is more transfer to be done */
526static void *next_transfer(struct driver_data *drv_data)
527{
528 struct spi_message *msg = drv_data->cur_msg;
529 struct spi_transfer *trans = drv_data->cur_transfer;
530
531 /* Move to next transfer */
532 if (trans->transfer_list.next != &msg->transfers) {
533 drv_data->cur_transfer =
534 list_entry(trans->transfer_list.next,
535 struct spi_transfer, transfer_list);
536 return RUNNING_STATE;
537 } else
538 return DONE_STATE;
539}
540
541/*
542 * caller already set message->status;
543 * dma and pio irqs are blocked give finished message back
544 */
545static void giveback(struct driver_data *drv_data)
546{
547 struct spi_transfer *last_transfer;
548 unsigned long flags;
549 struct spi_message *msg;
550
551 spin_lock_irqsave(&drv_data->lock, flags);
552 msg = drv_data->cur_msg;
553 drv_data->cur_msg = NULL;
554 drv_data->cur_transfer = NULL;
555 drv_data->cur_chip = NULL;
556 queue_work(drv_data->workqueue, &drv_data->pump_messages);
557 spin_unlock_irqrestore(&drv_data->lock, flags);
558
559 last_transfer = list_entry(msg->transfers.prev,
560 struct spi_transfer, transfer_list);
561
562 msg->state = NULL;
563
564 /* disable chip select signal. And not stop spi in autobuffer mode */
565 if (drv_data->tx_dma != 0xFFFF) {
566 write_FLAG(0xFF00);
567 bfin_spi_disable(drv_data);
568 }
569
570 if (msg->complete)
571 msg->complete(msg->context);
572}
573
574static irqreturn_t dma_irq_handler(int irq, void *dev_id, struct pt_regs *regs)
575{
576 struct driver_data *drv_data = (struct driver_data *)dev_id;
577 struct spi_message *msg = drv_data->cur_msg;
578
579 pr_debug("in dma_irq_handler\n");
580 clear_dma_irqstat(CH_SPI);
581
582 /*
583 * wait for the last transaction shifted out. yes, these two
584 * while loops are supposed to be the same (see the HRM).
585 */
586 if (drv_data->tx != NULL) {
587 while (bfin_read_SPI_STAT() & TXS)
588 continue;
589 while (bfin_read_SPI_STAT() & TXS)
590 continue;
591 }
592
593 while (!(bfin_read_SPI_STAT() & SPIF))
594 continue;
595
596 bfin_spi_disable(drv_data);
597
598 msg->actual_length += drv_data->len_in_bytes;
599
600 /* Move to next transfer */
601 msg->state = next_transfer(drv_data);
602
603 /* Schedule transfer tasklet */
604 tasklet_schedule(&drv_data->pump_transfers);
605
606 /* free the irq handler before next transfer */
607 pr_debug("disable dma channel irq%d\n", CH_SPI);
608 dma_disable_irq(CH_SPI);
609
610 return IRQ_HANDLED;
611}
612
613static void pump_transfers(unsigned long data)
614{
615 struct driver_data *drv_data = (struct driver_data *)data;
616 struct spi_message *message = NULL;
617 struct spi_transfer *transfer = NULL;
618 struct spi_transfer *previous = NULL;
619 struct chip_data *chip = NULL;
620 u16 cr, width, dma_width, dma_config;
621 u32 tranf_success = 1;
622
623 /* Get current state information */
624 message = drv_data->cur_msg;
625 transfer = drv_data->cur_transfer;
626 chip = drv_data->cur_chip;
627
628 /*
629 * if msg is error or done, report it back using complete() callback
630 */
631
632 /* Handle for abort */
633 if (message->state == ERROR_STATE) {
634 message->status = -EIO;
635 giveback(drv_data);
636 return;
637 }
638
639 /* Handle end of message */
640 if (message->state == DONE_STATE) {
641 message->status = 0;
642 giveback(drv_data);
643 return;
644 }
645
646 /* Delay if requested at end of transfer */
647 if (message->state == RUNNING_STATE) {
648 previous = list_entry(transfer->transfer_list.prev,
649 struct spi_transfer, transfer_list);
650 if (previous->delay_usecs)
651 udelay(previous->delay_usecs);
652 }
653
654 /* Setup the transfer state based on the type of transfer */
655 if (flush(drv_data) == 0) {
656 dev_err(&drv_data->pdev->dev, "pump_transfers: flush failed\n");
657 message->status = -EIO;
658 giveback(drv_data);
659 return;
660 }
661
662 if (transfer->tx_buf != NULL) {
663 drv_data->tx = (void *)transfer->tx_buf;
664 drv_data->tx_end = drv_data->tx + transfer->len;
665 pr_debug("tx_buf is %p, tx_end is %p\n", transfer->tx_buf,
666 drv_data->tx_end);
667 } else {
668 drv_data->tx = NULL;
669 }
670
671 if (transfer->rx_buf != NULL) {
672 drv_data->rx = transfer->rx_buf;
673 drv_data->rx_end = drv_data->rx + transfer->len;
674 pr_debug("rx_buf is %p, rx_end is %p\n", transfer->rx_buf,
675 drv_data->rx_end);
676 } else {
677 drv_data->rx = NULL;
678 }
679
680 drv_data->rx_dma = transfer->rx_dma;
681 drv_data->tx_dma = transfer->tx_dma;
682 drv_data->len_in_bytes = transfer->len;
683
684 width = chip->width;
685 if (width == CFG_SPI_WORDSIZE16) {
686 drv_data->len = (transfer->len) >> 1;
687 } else {
688 drv_data->len = transfer->len;
689 }
690 drv_data->write = drv_data->tx ? chip->write : null_writer;
691 drv_data->read = drv_data->rx ? chip->read : null_reader;
692 drv_data->duplex = chip->duplex ? chip->duplex : null_writer;
693 pr_debug
694 ("transfer: drv_data->write is %p, chip->write is %p, null_wr is %p\n",
695 drv_data->write, chip->write, null_writer);
696
697 /* speed and width has been set on per message */
698 message->state = RUNNING_STATE;
699 dma_config = 0;
700
701 /* restore spi status for each spi transfer */
702 if (transfer->speed_hz) {
703 write_BAUD(hz_to_spi_baud(transfer->speed_hz));
704 } else {
705 write_BAUD(chip->baud);
706 }
707 write_FLAG(chip->flag);
708
709 pr_debug("now pumping a transfer: width is %d, len is %d\n", width,
710 transfer->len);
711
712 /*
713 * Try to map dma buffer and do a dma transfer if
714 * successful use different way to r/w according to
715 * drv_data->cur_chip->enable_dma
716 */
717 if (drv_data->cur_chip->enable_dma && drv_data->len > 6) {
718
719 write_STAT(BIT_STAT_CLR);
720 disable_dma(CH_SPI);
721 clear_dma_irqstat(CH_SPI);
722 bfin_spi_disable(drv_data);
723
724 /* config dma channel */
725 pr_debug("doing dma transfer\n");
726 if (width == CFG_SPI_WORDSIZE16) {
727 set_dma_x_count(CH_SPI, drv_data->len);
728 set_dma_x_modify(CH_SPI, 2);
729 dma_width = WDSIZE_16;
730 } else {
731 set_dma_x_count(CH_SPI, drv_data->len);
732 set_dma_x_modify(CH_SPI, 1);
733 dma_width = WDSIZE_8;
734 }
735
736 /* set transfer width,direction. And enable spi */
737 cr = (read_CTRL() & (~BIT_CTL_TIMOD));
738
739 /* dirty hack for autobuffer DMA mode */
740 if (drv_data->tx_dma == 0xFFFF) {
741 pr_debug("doing autobuffer DMA out.\n");
742
743 /* no irq in autobuffer mode */
744 dma_config =
745 (DMAFLOW_AUTO | RESTART | dma_width | DI_EN);
746 set_dma_config(CH_SPI, dma_config);
747 set_dma_start_addr(CH_SPI, (unsigned long)drv_data->tx);
748 enable_dma(CH_SPI);
749 write_CTRL(cr | CFG_SPI_DMAWRITE | (width << 8) |
750 (CFG_SPI_ENABLE << 14));
751
752 /* just return here, there can only be one transfer in this mode */
753 message->status = 0;
754 giveback(drv_data);
755 return;
756 }
757
758 /* In dma mode, rx or tx must be NULL in one transfer */
759 if (drv_data->rx != NULL) {
760 /* set transfer mode, and enable SPI */
761 pr_debug("doing DMA in.\n");
762
763 /* disable SPI before write to TDBR */
764 write_CTRL(cr & ~BIT_CTL_ENABLE);
765
766 /* clear tx reg soformer data is not shifted out */
767 write_TDBR(0xFF);
768
769 set_dma_x_count(CH_SPI, drv_data->len);
770
771 /* start dma */
772 dma_enable_irq(CH_SPI);
773 dma_config = (WNR | RESTART | dma_width | DI_EN);
774 set_dma_config(CH_SPI, dma_config);
775 set_dma_start_addr(CH_SPI, (unsigned long)drv_data->rx);
776 enable_dma(CH_SPI);
777
778 cr |=
779 CFG_SPI_DMAREAD | (width << 8) | (CFG_SPI_ENABLE <<
780 14);
781 /* set transfer mode, and enable SPI */
782 write_CTRL(cr);
783 } else if (drv_data->tx != NULL) {
784 pr_debug("doing DMA out.\n");
785
786 /* start dma */
787 dma_enable_irq(CH_SPI);
788 dma_config = (RESTART | dma_width | DI_EN);
789 set_dma_config(CH_SPI, dma_config);
790 set_dma_start_addr(CH_SPI, (unsigned long)drv_data->tx);
791 enable_dma(CH_SPI);
792
793 write_CTRL(cr | CFG_SPI_DMAWRITE | (width << 8) |
794 (CFG_SPI_ENABLE << 14));
795
796 }
797 } else {
798 /* IO mode write then read */
799 pr_debug("doing IO transfer\n");
800
801 write_STAT(BIT_STAT_CLR);
802
803 if (drv_data->tx != NULL && drv_data->rx != NULL) {
804 /* full duplex mode */
805 BUG_ON((drv_data->tx_end - drv_data->tx) !=
806 (drv_data->rx_end - drv_data->rx));
807 cr = (read_CTRL() & (~BIT_CTL_TIMOD)); /* clear the TIMOD bits */
808 cr |=
809 CFG_SPI_WRITE | (width << 8) | (CFG_SPI_ENABLE <<
810 14);
811 pr_debug("IO duplex: cr is 0x%x\n", cr);
812
813 write_CTRL(cr);
814 SSYNC();
815
816 drv_data->duplex(drv_data);
817
818 if (drv_data->tx != drv_data->tx_end)
819 tranf_success = 0;
820 } else if (drv_data->tx != NULL) {
821 /* write only half duplex */
822 cr = (read_CTRL() & (~BIT_CTL_TIMOD)); /* clear the TIMOD bits */
823 cr |=
824 CFG_SPI_WRITE | (width << 8) | (CFG_SPI_ENABLE <<
825 14);
826 pr_debug("IO write: cr is 0x%x\n", cr);
827
828 write_CTRL(cr);
829 SSYNC();
830
831 drv_data->write(drv_data);
832
833 if (drv_data->tx != drv_data->tx_end)
834 tranf_success = 0;
835 } else if (drv_data->rx != NULL) {
836 /* read only half duplex */
837 cr = (read_CTRL() & (~BIT_CTL_TIMOD)); /* cleare the TIMOD bits */
838 cr |=
839 CFG_SPI_READ | (width << 8) | (CFG_SPI_ENABLE <<
840 14);
841 pr_debug("IO read: cr is 0x%x\n", cr);
842
843 write_CTRL(cr);
844 SSYNC();
845
846 drv_data->read(drv_data);
847 if (drv_data->rx != drv_data->rx_end)
848 tranf_success = 0;
849 }
850
851 if (!tranf_success) {
852 pr_debug("IO write error!\n");
853 message->state = ERROR_STATE;
854 } else {
855 /* Update total byte transfered */
856 message->actual_length += drv_data->len;
857
858 /* Move to next transfer of this msg */
859 message->state = next_transfer(drv_data);
860 }
861
862 /* Schedule next transfer tasklet */
863 tasklet_schedule(&drv_data->pump_transfers);
864
865 }
866}
867
868/* pop a msg from queue and kick off real transfer */
869static void pump_messages(struct work_struct *work)
870{
871 struct driver_data *drv_data = container_of(work, struct driver_data, pump_messages);
872 unsigned long flags;
873
874 /* Lock queue and check for queue work */
875 spin_lock_irqsave(&drv_data->lock, flags);
876 if (list_empty(&drv_data->queue) || drv_data->run == QUEUE_STOPPED) {
877 /* pumper kicked off but no work to do */
878 drv_data->busy = 0;
879 spin_unlock_irqrestore(&drv_data->lock, flags);
880 return;
881 }
882
883 /* Make sure we are not already running a message */
884 if (drv_data->cur_msg) {
885 spin_unlock_irqrestore(&drv_data->lock, flags);
886 return;
887 }
888
889 /* Extract head of queue */
890 drv_data->cur_msg = list_entry(drv_data->queue.next,
891 struct spi_message, queue);
892 list_del_init(&drv_data->cur_msg->queue);
893
894 /* Initial message state */
895 drv_data->cur_msg->state = START_STATE;
896 drv_data->cur_transfer = list_entry(drv_data->cur_msg->transfers.next,
897 struct spi_transfer, transfer_list);
898
899 /* Setup the SSP using the per chip configuration */
900 drv_data->cur_chip = spi_get_ctldata(drv_data->cur_msg->spi);
901 restore_state(drv_data);
902 pr_debug
903 ("got a message to pump, state is set to: baud %d, flag 0x%x, ctl 0x%x\n",
904 drv_data->cur_chip->baud, drv_data->cur_chip->flag,
905 drv_data->cur_chip->ctl_reg);
906 pr_debug("the first transfer len is %d\n", drv_data->cur_transfer->len);
907
908 /* Mark as busy and launch transfers */
909 tasklet_schedule(&drv_data->pump_transfers);
910
911 drv_data->busy = 1;
912 spin_unlock_irqrestore(&drv_data->lock, flags);
913}
914
915/*
916 * got a msg to transfer, queue it in drv_data->queue.
917 * And kick off message pumper
918 */
919static int transfer(struct spi_device *spi, struct spi_message *msg)
920{
921 struct driver_data *drv_data = spi_master_get_devdata(spi->master);
922 unsigned long flags;
923
924 spin_lock_irqsave(&drv_data->lock, flags);
925
926 if (drv_data->run == QUEUE_STOPPED) {
927 spin_unlock_irqrestore(&drv_data->lock, flags);
928 return -ESHUTDOWN;
929 }
930
931 msg->actual_length = 0;
932 msg->status = -EINPROGRESS;
933 msg->state = START_STATE;
934
935 pr_debug("adding an msg in transfer() \n");
936 list_add_tail(&msg->queue, &drv_data->queue);
937
938 if (drv_data->run == QUEUE_RUNNING && !drv_data->busy)
939 queue_work(drv_data->workqueue, &drv_data->pump_messages);
940
941 spin_unlock_irqrestore(&drv_data->lock, flags);
942
943 return 0;
944}
945
946/* first setup for new devices */
947static int setup(struct spi_device *spi)
948{
949 struct bfin5xx_spi_chip *chip_info = NULL;
950 struct chip_data *chip;
951 struct driver_data *drv_data = spi_master_get_devdata(spi->master);
952 u8 spi_flg;
953
954 /* Abort device setup if requested features are not supported */
955 if (spi->mode & ~(SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST)) {
956 dev_err(&spi->dev, "requested mode not fully supported\n");
957 return -EINVAL;
958 }
959
960 /* Zero (the default) here means 8 bits */
961 if (!spi->bits_per_word)
962 spi->bits_per_word = 8;
963
964 if (spi->bits_per_word != 8 && spi->bits_per_word != 16)
965 return -EINVAL;
966
967 /* Only alloc (or use chip_info) on first setup */
968 chip = spi_get_ctldata(spi);
969 if (chip == NULL) {
970 chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL);
971 if (!chip)
972 return -ENOMEM;
973
974 chip->enable_dma = 0;
975 chip_info = spi->controller_data;
976 }
977
978 /* chip_info isn't always needed */
979 if (chip_info) {
980 chip->enable_dma = chip_info->enable_dma != 0
981 && drv_data->master_info->enable_dma;
982 chip->ctl_reg = chip_info->ctl_reg;
983 chip->bits_per_word = chip_info->bits_per_word;
984 chip->cs_change_per_word = chip_info->cs_change_per_word;
985 chip->cs_chg_udelay = chip_info->cs_chg_udelay;
986 }
987
988 /* translate common spi framework into our register */
989 if (spi->mode & SPI_CPOL)
990 chip->ctl_reg |= CPOL;
991 if (spi->mode & SPI_CPHA)
992 chip->ctl_reg |= CPHA;
993 if (spi->mode & SPI_LSB_FIRST)
994 chip->ctl_reg |= LSBF;
995 /* we dont support running in slave mode (yet?) */
996 chip->ctl_reg |= MSTR;
997
998 /*
999 * if any one SPI chip is registered and wants DMA, request the
1000 * DMA channel for it
1001 */
1002 if (chip->enable_dma && !dma_requested) {
1003 /* register dma irq handler */
1004 if (request_dma(CH_SPI, "BF53x_SPI_DMA") < 0) {
1005 pr_debug
1006 ("Unable to request BlackFin SPI DMA channel\n");
1007 return -ENODEV;
1008 }
1009 if (set_dma_callback(CH_SPI, (void *)dma_irq_handler, drv_data)
1010 < 0) {
1011 pr_debug("Unable to set dma callback\n");
1012 return -EPERM;
1013 }
1014 dma_disable_irq(CH_SPI);
1015 dma_requested = 1;
1016 }
1017
1018 /*
1019 * Notice: for blackfin, the speed_hz is the value of register
1020 * SPI_BAUD, not the real baudrate
1021 */
1022 chip->baud = hz_to_spi_baud(spi->max_speed_hz);
1023 spi_flg = ~(1 << (spi->chip_select));
1024 chip->flag = ((u16) spi_flg << 8) | (1 << (spi->chip_select));
1025 chip->chip_select_num = spi->chip_select;
1026
1027 switch (chip->bits_per_word) {
1028 case 8:
1029 chip->n_bytes = 1;
1030 chip->width = CFG_SPI_WORDSIZE8;
1031 chip->read = chip->cs_change_per_word ?
1032 u8_cs_chg_reader : u8_reader;
1033 chip->write = chip->cs_change_per_word ?
1034 u8_cs_chg_writer : u8_writer;
1035 chip->duplex = chip->cs_change_per_word ?
1036 u8_cs_chg_duplex : u8_duplex;
1037 break;
1038
1039 case 16:
1040 chip->n_bytes = 2;
1041 chip->width = CFG_SPI_WORDSIZE16;
1042 chip->read = chip->cs_change_per_word ?
1043 u16_cs_chg_reader : u16_reader;
1044 chip->write = chip->cs_change_per_word ?
1045 u16_cs_chg_writer : u16_writer;
1046 chip->duplex = chip->cs_change_per_word ?
1047 u16_cs_chg_duplex : u16_duplex;
1048 break;
1049
1050 default:
1051 dev_err(&spi->dev, "%d bits_per_word is not supported\n",
1052 chip->bits_per_word);
1053 kfree(chip);
1054 return -ENODEV;
1055 }
1056
1057 pr_debug("setup spi chip %s, width is %d, dma is %d,",
1058 spi->modalias, chip->width, chip->enable_dma);
1059 pr_debug("ctl_reg is 0x%x, flag_reg is 0x%x\n",
1060 chip->ctl_reg, chip->flag);
1061
1062 spi_set_ctldata(spi, chip);
1063
1064 return 0;
1065}
1066
1067/*
1068 * callback for spi framework.
1069 * clean driver specific data
1070 */
1071static void cleanup(const struct spi_device *spi)
1072{
1073 struct chip_data *chip = spi_get_ctldata((struct spi_device *)spi);
1074
1075 kfree(chip);
1076}
1077
1078static inline int init_queue(struct driver_data *drv_data)
1079{
1080 INIT_LIST_HEAD(&drv_data->queue);
1081 spin_lock_init(&drv_data->lock);
1082
1083 drv_data->run = QUEUE_STOPPED;
1084 drv_data->busy = 0;
1085
1086 /* init transfer tasklet */
1087 tasklet_init(&drv_data->pump_transfers,
1088 pump_transfers, (unsigned long)drv_data);
1089
1090 /* init messages workqueue */
1091 INIT_WORK(&drv_data->pump_messages, pump_messages);
1092 drv_data->workqueue =
1093 create_singlethread_workqueue(drv_data->master->cdev.dev->bus_id);
1094 if (drv_data->workqueue == NULL)
1095 return -EBUSY;
1096
1097 return 0;
1098}
1099
1100static inline int start_queue(struct driver_data *drv_data)
1101{
1102 unsigned long flags;
1103
1104 spin_lock_irqsave(&drv_data->lock, flags);
1105
1106 if (drv_data->run == QUEUE_RUNNING || drv_data->busy) {
1107 spin_unlock_irqrestore(&drv_data->lock, flags);
1108 return -EBUSY;
1109 }
1110
1111 drv_data->run = QUEUE_RUNNING;
1112 drv_data->cur_msg = NULL;
1113 drv_data->cur_transfer = NULL;
1114 drv_data->cur_chip = NULL;
1115 spin_unlock_irqrestore(&drv_data->lock, flags);
1116
1117 queue_work(drv_data->workqueue, &drv_data->pump_messages);
1118
1119 return 0;
1120}
1121
1122static inline int stop_queue(struct driver_data *drv_data)
1123{
1124 unsigned long flags;
1125 unsigned limit = 500;
1126 int status = 0;
1127
1128 spin_lock_irqsave(&drv_data->lock, flags);
1129
1130 /*
1131 * This is a bit lame, but is optimized for the common execution path.
1132 * A wait_queue on the drv_data->busy could be used, but then the common
1133 * execution path (pump_messages) would be required to call wake_up or
1134 * friends on every SPI message. Do this instead
1135 */
1136 drv_data->run = QUEUE_STOPPED;
1137 while (!list_empty(&drv_data->queue) && drv_data->busy && limit--) {
1138 spin_unlock_irqrestore(&drv_data->lock, flags);
1139 msleep(10);
1140 spin_lock_irqsave(&drv_data->lock, flags);
1141 }
1142
1143 if (!list_empty(&drv_data->queue) || drv_data->busy)
1144 status = -EBUSY;
1145
1146 spin_unlock_irqrestore(&drv_data->lock, flags);
1147
1148 return status;
1149}
1150
1151static inline int destroy_queue(struct driver_data *drv_data)
1152{
1153 int status;
1154
1155 status = stop_queue(drv_data);
1156 if (status != 0)
1157 return status;
1158
1159 destroy_workqueue(drv_data->workqueue);
1160
1161 return 0;
1162}
1163
1164static int __init bfin5xx_spi_probe(struct platform_device *pdev)
1165{
1166 struct device *dev = &pdev->dev;
1167 struct bfin5xx_spi_master *platform_info;
1168 struct spi_master *master;
1169 struct driver_data *drv_data = 0;
1170 int status = 0;
1171
1172 platform_info = dev->platform_data;
1173
1174 /* Allocate master with space for drv_data */
1175 master = spi_alloc_master(dev, sizeof(struct driver_data) + 16);
1176 if (!master) {
1177 dev_err(&pdev->dev, "can not alloc spi_master\n");
1178 return -ENOMEM;
1179 }
1180 drv_data = spi_master_get_devdata(master);
1181 drv_data->master = master;
1182 drv_data->master_info = platform_info;
1183 drv_data->pdev = pdev;
1184
1185 master->bus_num = pdev->id;
1186 master->num_chipselect = platform_info->num_chipselect;
1187 master->cleanup = cleanup;
1188 master->setup = setup;
1189 master->transfer = transfer;
1190
1191 /* Initial and start queue */
1192 status = init_queue(drv_data);
1193 if (status != 0) {
1194 dev_err(&pdev->dev, "problem initializing queue\n");
1195 goto out_error_queue_alloc;
1196 }
1197 status = start_queue(drv_data);
1198 if (status != 0) {
1199 dev_err(&pdev->dev, "problem starting queue\n");
1200 goto out_error_queue_alloc;
1201 }
1202
1203 /* Register with the SPI framework */
1204 platform_set_drvdata(pdev, drv_data);
1205 status = spi_register_master(master);
1206 if (status != 0) {
1207 dev_err(&pdev->dev, "problem registering spi master\n");
1208 goto out_error_queue_alloc;
1209 }
1210 pr_debug("controller probe successfully\n");
1211 return status;
1212
1213 out_error_queue_alloc:
1214 destroy_queue(drv_data);
1215 spi_master_put(master);
1216 return status;
1217}
1218
1219/* stop hardware and remove the driver */
1220static int __devexit bfin5xx_spi_remove(struct platform_device *pdev)
1221{
1222 struct driver_data *drv_data = platform_get_drvdata(pdev);
1223 int status = 0;
1224
1225 if (!drv_data)
1226 return 0;
1227
1228 /* Remove the queue */
1229 status = destroy_queue(drv_data);
1230 if (status != 0)
1231 return status;
1232
1233 /* Disable the SSP at the peripheral and SOC level */
1234 bfin_spi_disable(drv_data);
1235
1236 /* Release DMA */
1237 if (drv_data->master_info->enable_dma) {
1238 if (dma_channel_active(CH_SPI))
1239 free_dma(CH_SPI);
1240 }
1241
1242 /* Disconnect from the SPI framework */
1243 spi_unregister_master(drv_data->master);
1244
1245 /* Prevent double remove */
1246 platform_set_drvdata(pdev, NULL);
1247
1248 return 0;
1249}
1250
1251#ifdef CONFIG_PM
1252static int bfin5xx_spi_suspend(struct platform_device *pdev, pm_message_t state)
1253{
1254 struct driver_data *drv_data = platform_get_drvdata(pdev);
1255 int status = 0;
1256
1257 status = stop_queue(drv_data);
1258 if (status != 0)
1259 return status;
1260
1261 /* stop hardware */
1262 bfin_spi_disable(drv_data);
1263
1264 return 0;
1265}
1266
1267static int bfin5xx_spi_resume(struct platform_device *pdev)
1268{
1269 struct driver_data *drv_data = platform_get_drvdata(pdev);
1270 int status = 0;
1271
1272 /* Enable the SPI interface */
1273 bfin_spi_enable(drv_data);
1274
1275 /* Start the queue running */
1276 status = start_queue(drv_data);
1277 if (status != 0) {
1278 dev_err(&pdev->dev, "problem starting queue (%d)\n", status);
1279 return status;
1280 }
1281
1282 return 0;
1283}
1284#else
1285#define bfin5xx_spi_suspend NULL
1286#define bfin5xx_spi_resume NULL
1287#endif /* CONFIG_PM */
1288
1289static struct platform_driver bfin5xx_spi_driver = {
1290 .driver = {
1291 .name = "bfin-spi-master",
1292 .bus = &platform_bus_type,
1293 .owner = THIS_MODULE,
1294 },
1295 .probe = bfin5xx_spi_probe,
1296 .remove = __devexit_p(bfin5xx_spi_remove),
1297 .suspend = bfin5xx_spi_suspend,
1298 .resume = bfin5xx_spi_resume,
1299};
1300
1301static int __init bfin5xx_spi_init(void)
1302{
1303 return platform_driver_register(&bfin5xx_spi_driver);
1304}
1305
1306module_init(bfin5xx_spi_init);
1307
1308static void __exit bfin5xx_spi_exit(void)
1309{
1310 platform_driver_unregister(&bfin5xx_spi_driver);
1311}
1312
1313module_exit(bfin5xx_spi_exit);