aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/spi
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2009-06-14 16:42:43 -0400
committerLinus Torvalds <torvalds@linux-foundation.org>2009-06-14 16:42:43 -0400
commit2cf4d4514d5b43c1f3b64bd0ec8b9853bde8f1dc (patch)
treee35a625496acc6ac852846d40b8851186b9d1ac4 /drivers/spi
parent44b7532b8b464f606053562400719c9c21276037 (diff)
parentce53895a5d24e0ee19fb92f56c17323fb4c9ab27 (diff)
Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (417 commits) MAINTAINERS: EB110ATX is not ebsa110 MAINTAINERS: update Eric Miao's email address and status fb: add support of LCD display controller on pxa168/910 (base layer) [ARM] 5552/1: ep93xx get_uart_rate(): use EP93XX_SYSCON_PWRCNT and EP93XX_SYSCON_PWRCN [ARM] pxa/sharpsl_pm: zaurus needs generic pxa suspend/resume routines [ARM] 5544/1: Trust PrimeCell resource sizes [ARM] pxa/sharpsl_pm: cleanup of gpio-related code. [ARM] pxa/sharpsl_pm: drop set_irq_type calls [ARM] pxa/sharpsl_pm: merge pxa-specific code into generic one [ARM] pxa/sharpsl_pm: merge the two sharpsl_pm.c since it's now pxa specific [ARM] sa1100: remove unused collie_pm.c [ARM] pxa: fix the conflicting non-static declarations of global_gpios[] [ARM] 5550/1: Add default configure file for w90p910 platform [ARM] 5549/1: Add clock api for w90p910 platform. [ARM] 5548/1: Add gpio api for w90p910 platform [ARM] 5551/1: Add multi-function pin api for w90p910 platform. [ARM] Make ARM_VIC_NR depend on ARM_VIC [ARM] 5546/1: ARM PL022 SSP/SPI driver v3 ARM: OMAP4: SMP: Update defconfig for OMAP4430 ARM: OMAP4: SMP: Enable SMP support for OMAP4430 ...
Diffstat (limited to 'drivers/spi')
-rw-r--r--drivers/spi/Kconfig11
-rw-r--r--drivers/spi/Makefile1
-rw-r--r--drivers/spi/amba-pl022.c1866
-rw-r--r--drivers/spi/spi_s3c24xx_gpio.c1
4 files changed, 1878 insertions, 1 deletions
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 957494775413..e8aae227b5e0 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -118,7 +118,7 @@ config SPI_GPIO
118 118
119config SPI_IMX 119config SPI_IMX
120 tristate "Freescale iMX SPI controller" 120 tristate "Freescale iMX SPI controller"
121 depends on ARCH_IMX && EXPERIMENTAL 121 depends on ARCH_MX1 && EXPERIMENTAL
122 help 122 help
123 This enables using the Freescale iMX SPI controller in master 123 This enables using the Freescale iMX SPI controller in master
124 mode. 124 mode.
@@ -171,6 +171,15 @@ config SPI_ORION
171 help 171 help
172 This enables using the SPI master controller on the Orion chips. 172 This enables using the SPI master controller on the Orion chips.
173 173
174config SPI_PL022
175 tristate "ARM AMBA PL022 SSP controller (EXPERIMENTAL)"
176 depends on ARM_AMBA && EXPERIMENTAL
177 default y if MACH_U300
178 help
179 This selects the ARM(R) AMBA(R) PrimeCell PL022 SSP
180 controller. If you have an embedded system with an AMBA(R)
181 bus and a PL022 controller, say Y or M here.
182
174config SPI_PXA2XX 183config SPI_PXA2XX
175 tristate "PXA2xx SSP SPI master" 184 tristate "PXA2xx SSP SPI master"
176 depends on ARCH_PXA && EXPERIMENTAL 185 depends on ARCH_PXA && EXPERIMENTAL
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 5d0451936d86..ecfadb180482 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -23,6 +23,7 @@ obj-$(CONFIG_SPI_PXA2XX) += pxa2xx_spi.o
23obj-$(CONFIG_SPI_OMAP_UWIRE) += omap_uwire.o 23obj-$(CONFIG_SPI_OMAP_UWIRE) += omap_uwire.o
24obj-$(CONFIG_SPI_OMAP24XX) += omap2_mcspi.o 24obj-$(CONFIG_SPI_OMAP24XX) += omap2_mcspi.o
25obj-$(CONFIG_SPI_ORION) += orion_spi.o 25obj-$(CONFIG_SPI_ORION) += orion_spi.o
26obj-$(CONFIG_SPI_PL022) += amba-pl022.o
26obj-$(CONFIG_SPI_MPC52xx_PSC) += mpc52xx_psc_spi.o 27obj-$(CONFIG_SPI_MPC52xx_PSC) += mpc52xx_psc_spi.o
27obj-$(CONFIG_SPI_MPC83xx) += spi_mpc83xx.o 28obj-$(CONFIG_SPI_MPC83xx) += spi_mpc83xx.o
28obj-$(CONFIG_SPI_S3C24XX_GPIO) += spi_s3c24xx_gpio.o 29obj-$(CONFIG_SPI_S3C24XX_GPIO) += spi_s3c24xx_gpio.o
diff --git a/drivers/spi/amba-pl022.c b/drivers/spi/amba-pl022.c
new file mode 100644
index 000000000000..da76797ce8b9
--- /dev/null
+++ b/drivers/spi/amba-pl022.c
@@ -0,0 +1,1866 @@
1/*
2 * drivers/spi/amba-pl022.c
3 *
4 * A driver for the ARM PL022 PrimeCell SSP/SPI bus master.
5 *
6 * Copyright (C) 2008-2009 ST-Ericsson AB
7 * Copyright (C) 2006 STMicroelectronics Pvt. Ltd.
8 *
9 * Author: Linus Walleij <linus.walleij@stericsson.com>
10 *
11 * Initial version inspired by:
12 * linux-2.6.17-rc3-mm1/drivers/spi/pxa2xx_spi.c
13 * Initial adoption to PL022 by:
14 * Sachin Verma <sachin.verma@st.com>
15 *
16 * This program is free software; you can redistribute it and/or modify
17 * it under the terms of the GNU General Public License as published by
18 * the Free Software Foundation; either version 2 of the License, or
19 * (at your option) any later version.
20 *
21 * This program is distributed in the hope that it will be useful,
22 * but WITHOUT ANY WARRANTY; without even the implied warranty of
23 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
24 * GNU General Public License for more details.
25 */
26
27/*
28 * TODO:
29 * - add timeout on polled transfers
30 * - add generic DMA framework support
31 */
32
33#include <linux/init.h>
34#include <linux/module.h>
35#include <linux/device.h>
36#include <linux/ioport.h>
37#include <linux/errno.h>
38#include <linux/interrupt.h>
39#include <linux/spi/spi.h>
40#include <linux/workqueue.h>
41#include <linux/errno.h>
42#include <linux/delay.h>
43#include <linux/clk.h>
44#include <linux/err.h>
45#include <linux/amba/bus.h>
46#include <linux/amba/pl022.h>
47#include <linux/io.h>
48#include <linux/delay.h>
49
50/*
51 * This macro is used to define some register default values.
52 * reg is masked with mask, the OR:ed with an (again masked)
53 * val shifted sb steps to the left.
54 */
55#define SSP_WRITE_BITS(reg, val, mask, sb) \
56 ((reg) = (((reg) & ~(mask)) | (((val)<<(sb)) & (mask))))
57
58/*
59 * This macro is also used to define some default values.
60 * It will just shift val by sb steps to the left and mask
61 * the result with mask.
62 */
63#define GEN_MASK_BITS(val, mask, sb) \
64 (((val)<<(sb)) & (mask))
65
66#define DRIVE_TX 0
67#define DO_NOT_DRIVE_TX 1
68
69#define DO_NOT_QUEUE_DMA 0
70#define QUEUE_DMA 1
71
72#define RX_TRANSFER 1
73#define TX_TRANSFER 2
74
75/*
76 * Macros to access SSP Registers with their offsets
77 */
78#define SSP_CR0(r) (r + 0x000)
79#define SSP_CR1(r) (r + 0x004)
80#define SSP_DR(r) (r + 0x008)
81#define SSP_SR(r) (r + 0x00C)
82#define SSP_CPSR(r) (r + 0x010)
83#define SSP_IMSC(r) (r + 0x014)
84#define SSP_RIS(r) (r + 0x018)
85#define SSP_MIS(r) (r + 0x01C)
86#define SSP_ICR(r) (r + 0x020)
87#define SSP_DMACR(r) (r + 0x024)
88#define SSP_ITCR(r) (r + 0x080)
89#define SSP_ITIP(r) (r + 0x084)
90#define SSP_ITOP(r) (r + 0x088)
91#define SSP_TDR(r) (r + 0x08C)
92
93#define SSP_PID0(r) (r + 0xFE0)
94#define SSP_PID1(r) (r + 0xFE4)
95#define SSP_PID2(r) (r + 0xFE8)
96#define SSP_PID3(r) (r + 0xFEC)
97
98#define SSP_CID0(r) (r + 0xFF0)
99#define SSP_CID1(r) (r + 0xFF4)
100#define SSP_CID2(r) (r + 0xFF8)
101#define SSP_CID3(r) (r + 0xFFC)
102
103/*
104 * SSP Control Register 0 - SSP_CR0
105 */
106#define SSP_CR0_MASK_DSS (0x1FUL << 0)
107#define SSP_CR0_MASK_HALFDUP (0x1UL << 5)
108#define SSP_CR0_MASK_SPO (0x1UL << 6)
109#define SSP_CR0_MASK_SPH (0x1UL << 7)
110#define SSP_CR0_MASK_SCR (0xFFUL << 8)
111#define SSP_CR0_MASK_CSS (0x1FUL << 16)
112#define SSP_CR0_MASK_FRF (0x3UL << 21)
113
114/*
115 * SSP Control Register 0 - SSP_CR1
116 */
117#define SSP_CR1_MASK_LBM (0x1UL << 0)
118#define SSP_CR1_MASK_SSE (0x1UL << 1)
119#define SSP_CR1_MASK_MS (0x1UL << 2)
120#define SSP_CR1_MASK_SOD (0x1UL << 3)
121#define SSP_CR1_MASK_RENDN (0x1UL << 4)
122#define SSP_CR1_MASK_TENDN (0x1UL << 5)
123#define SSP_CR1_MASK_MWAIT (0x1UL << 6)
124#define SSP_CR1_MASK_RXIFLSEL (0x7UL << 7)
125#define SSP_CR1_MASK_TXIFLSEL (0x7UL << 10)
126
127/*
128 * SSP Data Register - SSP_DR
129 */
130#define SSP_DR_MASK_DATA 0xFFFFFFFF
131
132/*
133 * SSP Status Register - SSP_SR
134 */
135#define SSP_SR_MASK_TFE (0x1UL << 0) /* Transmit FIFO empty */
136#define SSP_SR_MASK_TNF (0x1UL << 1) /* Transmit FIFO not full */
137#define SSP_SR_MASK_RNE (0x1UL << 2) /* Receive FIFO not empty */
138#define SSP_SR_MASK_RFF (0x1UL << 3) /* Receive FIFO full */
139#define SSP_SR_MASK_BSY (0x1UL << 4) /* Busy Flag */
140
141/*
142 * SSP Clock Prescale Register - SSP_CPSR
143 */
144#define SSP_CPSR_MASK_CPSDVSR (0xFFUL << 0)
145
146/*
147 * SSP Interrupt Mask Set/Clear Register - SSP_IMSC
148 */
149#define SSP_IMSC_MASK_RORIM (0x1UL << 0) /* Receive Overrun Interrupt mask */
150#define SSP_IMSC_MASK_RTIM (0x1UL << 1) /* Receive timeout Interrupt mask */
151#define SSP_IMSC_MASK_RXIM (0x1UL << 2) /* Receive FIFO Interrupt mask */
152#define SSP_IMSC_MASK_TXIM (0x1UL << 3) /* Transmit FIFO Interrupt mask */
153
154/*
155 * SSP Raw Interrupt Status Register - SSP_RIS
156 */
157/* Receive Overrun Raw Interrupt status */
158#define SSP_RIS_MASK_RORRIS (0x1UL << 0)
159/* Receive Timeout Raw Interrupt status */
160#define SSP_RIS_MASK_RTRIS (0x1UL << 1)
161/* Receive FIFO Raw Interrupt status */
162#define SSP_RIS_MASK_RXRIS (0x1UL << 2)
163/* Transmit FIFO Raw Interrupt status */
164#define SSP_RIS_MASK_TXRIS (0x1UL << 3)
165
166/*
167 * SSP Masked Interrupt Status Register - SSP_MIS
168 */
169/* Receive Overrun Masked Interrupt status */
170#define SSP_MIS_MASK_RORMIS (0x1UL << 0)
171/* Receive Timeout Masked Interrupt status */
172#define SSP_MIS_MASK_RTMIS (0x1UL << 1)
173/* Receive FIFO Masked Interrupt status */
174#define SSP_MIS_MASK_RXMIS (0x1UL << 2)
175/* Transmit FIFO Masked Interrupt status */
176#define SSP_MIS_MASK_TXMIS (0x1UL << 3)
177
178/*
179 * SSP Interrupt Clear Register - SSP_ICR
180 */
181/* Receive Overrun Raw Clear Interrupt bit */
182#define SSP_ICR_MASK_RORIC (0x1UL << 0)
183/* Receive Timeout Clear Interrupt bit */
184#define SSP_ICR_MASK_RTIC (0x1UL << 1)
185
186/*
187 * SSP DMA Control Register - SSP_DMACR
188 */
189/* Receive DMA Enable bit */
190#define SSP_DMACR_MASK_RXDMAE (0x1UL << 0)
191/* Transmit DMA Enable bit */
192#define SSP_DMACR_MASK_TXDMAE (0x1UL << 1)
193
194/*
195 * SSP Integration Test control Register - SSP_ITCR
196 */
197#define SSP_ITCR_MASK_ITEN (0x1UL << 0)
198#define SSP_ITCR_MASK_TESTFIFO (0x1UL << 1)
199
200/*
201 * SSP Integration Test Input Register - SSP_ITIP
202 */
203#define ITIP_MASK_SSPRXD (0x1UL << 0)
204#define ITIP_MASK_SSPFSSIN (0x1UL << 1)
205#define ITIP_MASK_SSPCLKIN (0x1UL << 2)
206#define ITIP_MASK_RXDMAC (0x1UL << 3)
207#define ITIP_MASK_TXDMAC (0x1UL << 4)
208#define ITIP_MASK_SSPTXDIN (0x1UL << 5)
209
210/*
211 * SSP Integration Test output Register - SSP_ITOP
212 */
213#define ITOP_MASK_SSPTXD (0x1UL << 0)
214#define ITOP_MASK_SSPFSSOUT (0x1UL << 1)
215#define ITOP_MASK_SSPCLKOUT (0x1UL << 2)
216#define ITOP_MASK_SSPOEn (0x1UL << 3)
217#define ITOP_MASK_SSPCTLOEn (0x1UL << 4)
218#define ITOP_MASK_RORINTR (0x1UL << 5)
219#define ITOP_MASK_RTINTR (0x1UL << 6)
220#define ITOP_MASK_RXINTR (0x1UL << 7)
221#define ITOP_MASK_TXINTR (0x1UL << 8)
222#define ITOP_MASK_INTR (0x1UL << 9)
223#define ITOP_MASK_RXDMABREQ (0x1UL << 10)
224#define ITOP_MASK_RXDMASREQ (0x1UL << 11)
225#define ITOP_MASK_TXDMABREQ (0x1UL << 12)
226#define ITOP_MASK_TXDMASREQ (0x1UL << 13)
227
228/*
229 * SSP Test Data Register - SSP_TDR
230 */
231#define TDR_MASK_TESTDATA (0xFFFFFFFF)
232
233/*
234 * Message State
235 * we use the spi_message.state (void *) pointer to
236 * hold a single state value, that's why all this
237 * (void *) casting is done here.
238 */
239#define STATE_START ((void *) 0)
240#define STATE_RUNNING ((void *) 1)
241#define STATE_DONE ((void *) 2)
242#define STATE_ERROR ((void *) -1)
243
244/*
245 * Queue State
246 */
247#define QUEUE_RUNNING (0)
248#define QUEUE_STOPPED (1)
249/*
250 * SSP State - Whether Enabled or Disabled
251 */
252#define SSP_DISABLED (0)
253#define SSP_ENABLED (1)
254
255/*
256 * SSP DMA State - Whether DMA Enabled or Disabled
257 */
258#define SSP_DMA_DISABLED (0)
259#define SSP_DMA_ENABLED (1)
260
261/*
262 * SSP Clock Defaults
263 */
264#define NMDK_SSP_DEFAULT_CLKRATE 0x2
265#define NMDK_SSP_DEFAULT_PRESCALE 0x40
266
267/*
268 * SSP Clock Parameter ranges
269 */
270#define CPSDVR_MIN 0x02
271#define CPSDVR_MAX 0xFE
272#define SCR_MIN 0x00
273#define SCR_MAX 0xFF
274
275/*
276 * SSP Interrupt related Macros
277 */
278#define DEFAULT_SSP_REG_IMSC 0x0UL
279#define DISABLE_ALL_INTERRUPTS DEFAULT_SSP_REG_IMSC
280#define ENABLE_ALL_INTERRUPTS (~DEFAULT_SSP_REG_IMSC)
281
282#define CLEAR_ALL_INTERRUPTS 0x3
283
284
285/*
286 * The type of reading going on on this chip
287 */
288enum ssp_reading {
289 READING_NULL,
290 READING_U8,
291 READING_U16,
292 READING_U32
293};
294
295/**
296 * The type of writing going on on this chip
297 */
298enum ssp_writing {
299 WRITING_NULL,
300 WRITING_U8,
301 WRITING_U16,
302 WRITING_U32
303};
304
305/**
306 * struct vendor_data - vendor-specific config parameters
307 * for PL022 derivates
308 * @fifodepth: depth of FIFOs (both)
309 * @max_bpw: maximum number of bits per word
310 * @unidir: supports unidirection transfers
311 */
312struct vendor_data {
313 int fifodepth;
314 int max_bpw;
315 bool unidir;
316};
317
318/**
319 * struct pl022 - This is the private SSP driver data structure
320 * @adev: AMBA device model hookup
321 * @phybase: The physical memory where the SSP device resides
322 * @virtbase: The virtual memory where the SSP is mapped
323 * @master: SPI framework hookup
324 * @master_info: controller-specific data from machine setup
325 * @regs: SSP controller register's virtual address
326 * @pump_messages: Work struct for scheduling work to the workqueue
327 * @lock: spinlock to syncronise access to driver data
328 * @workqueue: a workqueue on which any spi_message request is queued
329 * @busy: workqueue is busy
330 * @run: workqueue is running
331 * @pump_transfers: Tasklet used in Interrupt Transfer mode
332 * @cur_msg: Pointer to current spi_message being processed
333 * @cur_transfer: Pointer to current spi_transfer
334 * @cur_chip: pointer to current clients chip(assigned from controller_state)
335 * @tx: current position in TX buffer to be read
336 * @tx_end: end position in TX buffer to be read
337 * @rx: current position in RX buffer to be written
338 * @rx_end: end position in RX buffer to be written
339 * @readingtype: the type of read currently going on
340 * @writingtype: the type or write currently going on
341 */
342struct pl022 {
343 struct amba_device *adev;
344 struct vendor_data *vendor;
345 resource_size_t phybase;
346 void __iomem *virtbase;
347 struct clk *clk;
348 struct spi_master *master;
349 struct pl022_ssp_controller *master_info;
350 /* Driver message queue */
351 struct workqueue_struct *workqueue;
352 struct work_struct pump_messages;
353 spinlock_t queue_lock;
354 struct list_head queue;
355 int busy;
356 int run;
357 /* Message transfer pump */
358 struct tasklet_struct pump_transfers;
359 struct spi_message *cur_msg;
360 struct spi_transfer *cur_transfer;
361 struct chip_data *cur_chip;
362 void *tx;
363 void *tx_end;
364 void *rx;
365 void *rx_end;
366 enum ssp_reading read;
367 enum ssp_writing write;
368};
369
370/**
371 * struct chip_data - To maintain runtime state of SSP for each client chip
372 * @cr0: Value of control register CR0 of SSP
373 * @cr1: Value of control register CR1 of SSP
374 * @dmacr: Value of DMA control Register of SSP
375 * @cpsr: Value of Clock prescale register
376 * @n_bytes: how many bytes(power of 2) reqd for a given data width of client
377 * @enable_dma: Whether to enable DMA or not
378 * @write: function ptr to be used to write when doing xfer for this chip
379 * @read: function ptr to be used to read when doing xfer for this chip
380 * @cs_control: chip select callback provided by chip
381 * @xfer_type: polling/interrupt/DMA
382 *
383 * Runtime state of the SSP controller, maintained per chip,
384 * This would be set according to the current message that would be served
385 */
386struct chip_data {
387 u16 cr0;
388 u16 cr1;
389 u16 dmacr;
390 u16 cpsr;
391 u8 n_bytes;
392 u8 enable_dma:1;
393 enum ssp_reading read;
394 enum ssp_writing write;
395 void (*cs_control) (u32 command);
396 int xfer_type;
397};
398
399/**
400 * null_cs_control - Dummy chip select function
401 * @command: select/delect the chip
402 *
403 * If no chip select function is provided by client this is used as dummy
404 * chip select
405 */
406static void null_cs_control(u32 command)
407{
408 pr_debug("pl022: dummy chip select control, CS=0x%x\n", command);
409}
410
411/**
412 * giveback - current spi_message is over, schedule next message and call
413 * callback of this message. Assumes that caller already
414 * set message->status; dma and pio irqs are blocked
415 * @pl022: SSP driver private data structure
416 */
417static void giveback(struct pl022 *pl022)
418{
419 struct spi_transfer *last_transfer;
420 unsigned long flags;
421 struct spi_message *msg;
422 void (*curr_cs_control) (u32 command);
423
424 /*
425 * This local reference to the chip select function
426 * is needed because we set curr_chip to NULL
427 * as a step toward termininating the message.
428 */
429 curr_cs_control = pl022->cur_chip->cs_control;
430 spin_lock_irqsave(&pl022->queue_lock, flags);
431 msg = pl022->cur_msg;
432 pl022->cur_msg = NULL;
433 pl022->cur_transfer = NULL;
434 pl022->cur_chip = NULL;
435 queue_work(pl022->workqueue, &pl022->pump_messages);
436 spin_unlock_irqrestore(&pl022->queue_lock, flags);
437
438 last_transfer = list_entry(msg->transfers.prev,
439 struct spi_transfer,
440 transfer_list);
441
442 /* Delay if requested before any change in chip select */
443 if (last_transfer->delay_usecs)
444 /*
445 * FIXME: This runs in interrupt context.
446 * Is this really smart?
447 */
448 udelay(last_transfer->delay_usecs);
449
450 /*
451 * Drop chip select UNLESS cs_change is true or we are returning
452 * a message with an error, or next message is for another chip
453 */
454 if (!last_transfer->cs_change)
455 curr_cs_control(SSP_CHIP_DESELECT);
456 else {
457 struct spi_message *next_msg;
458
459 /* Holding of cs was hinted, but we need to make sure
460 * the next message is for the same chip. Don't waste
461 * time with the following tests unless this was hinted.
462 *
463 * We cannot postpone this until pump_messages, because
464 * after calling msg->complete (below) the driver that
465 * sent the current message could be unloaded, which
466 * could invalidate the cs_control() callback...
467 */
468
469 /* get a pointer to the next message, if any */
470 spin_lock_irqsave(&pl022->queue_lock, flags);
471 if (list_empty(&pl022->queue))
472 next_msg = NULL;
473 else
474 next_msg = list_entry(pl022->queue.next,
475 struct spi_message, queue);
476 spin_unlock_irqrestore(&pl022->queue_lock, flags);
477
478 /* see if the next and current messages point
479 * to the same chip
480 */
481 if (next_msg && next_msg->spi != msg->spi)
482 next_msg = NULL;
483 if (!next_msg || msg->state == STATE_ERROR)
484 curr_cs_control(SSP_CHIP_DESELECT);
485 }
486 msg->state = NULL;
487 if (msg->complete)
488 msg->complete(msg->context);
489 /* This message is completed, so let's turn off the clock! */
490 clk_disable(pl022->clk);
491}
492
493/**
494 * flush - flush the FIFO to reach a clean state
495 * @pl022: SSP driver private data structure
496 */
497static int flush(struct pl022 *pl022)
498{
499 unsigned long limit = loops_per_jiffy << 1;
500
501 dev_dbg(&pl022->adev->dev, "flush\n");
502 do {
503 while (readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_RNE)
504 readw(SSP_DR(pl022->virtbase));
505 } while ((readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_BSY) && limit--);
506 return limit;
507}
508
509/**
510 * restore_state - Load configuration of current chip
511 * @pl022: SSP driver private data structure
512 */
513static void restore_state(struct pl022 *pl022)
514{
515 struct chip_data *chip = pl022->cur_chip;
516
517 writew(chip->cr0, SSP_CR0(pl022->virtbase));
518 writew(chip->cr1, SSP_CR1(pl022->virtbase));
519 writew(chip->dmacr, SSP_DMACR(pl022->virtbase));
520 writew(chip->cpsr, SSP_CPSR(pl022->virtbase));
521 writew(DISABLE_ALL_INTERRUPTS, SSP_IMSC(pl022->virtbase));
522 writew(CLEAR_ALL_INTERRUPTS, SSP_ICR(pl022->virtbase));
523}
524
525/**
526 * load_ssp_default_config - Load default configuration for SSP
527 * @pl022: SSP driver private data structure
528 */
529
530/*
531 * Default SSP Register Values
532 */
533#define DEFAULT_SSP_REG_CR0 ( \
534 GEN_MASK_BITS(SSP_DATA_BITS_12, SSP_CR0_MASK_DSS, 0) | \
535 GEN_MASK_BITS(SSP_MICROWIRE_CHANNEL_FULL_DUPLEX, SSP_CR0_MASK_HALFDUP, 5) | \
536 GEN_MASK_BITS(SSP_CLK_POL_IDLE_LOW, SSP_CR0_MASK_SPO, 6) | \
537 GEN_MASK_BITS(SSP_CLK_FALLING_EDGE, SSP_CR0_MASK_SPH, 7) | \
538 GEN_MASK_BITS(NMDK_SSP_DEFAULT_CLKRATE, SSP_CR0_MASK_SCR, 8) | \
539 GEN_MASK_BITS(SSP_BITS_8, SSP_CR0_MASK_CSS, 16) | \
540 GEN_MASK_BITS(SSP_INTERFACE_MOTOROLA_SPI, SSP_CR0_MASK_FRF, 21) \
541)
542
543#define DEFAULT_SSP_REG_CR1 ( \
544 GEN_MASK_BITS(LOOPBACK_DISABLED, SSP_CR1_MASK_LBM, 0) | \
545 GEN_MASK_BITS(SSP_DISABLED, SSP_CR1_MASK_SSE, 1) | \
546 GEN_MASK_BITS(SSP_MASTER, SSP_CR1_MASK_MS, 2) | \
547 GEN_MASK_BITS(DO_NOT_DRIVE_TX, SSP_CR1_MASK_SOD, 3) | \
548 GEN_MASK_BITS(SSP_RX_MSB, SSP_CR1_MASK_RENDN, 4) | \
549 GEN_MASK_BITS(SSP_TX_MSB, SSP_CR1_MASK_TENDN, 5) | \
550 GEN_MASK_BITS(SSP_MWIRE_WAIT_ZERO, SSP_CR1_MASK_MWAIT, 6) |\
551 GEN_MASK_BITS(SSP_RX_1_OR_MORE_ELEM, SSP_CR1_MASK_RXIFLSEL, 7) | \
552 GEN_MASK_BITS(SSP_TX_1_OR_MORE_EMPTY_LOC, SSP_CR1_MASK_TXIFLSEL, 10) \
553)
554
555#define DEFAULT_SSP_REG_CPSR ( \
556 GEN_MASK_BITS(NMDK_SSP_DEFAULT_PRESCALE, SSP_CPSR_MASK_CPSDVSR, 0) \
557)
558
559#define DEFAULT_SSP_REG_DMACR (\
560 GEN_MASK_BITS(SSP_DMA_DISABLED, SSP_DMACR_MASK_RXDMAE, 0) | \
561 GEN_MASK_BITS(SSP_DMA_DISABLED, SSP_DMACR_MASK_TXDMAE, 1) \
562)
563
564
565static void load_ssp_default_config(struct pl022 *pl022)
566{
567 writew(DEFAULT_SSP_REG_CR0, SSP_CR0(pl022->virtbase));
568 writew(DEFAULT_SSP_REG_CR1, SSP_CR1(pl022->virtbase));
569 writew(DEFAULT_SSP_REG_DMACR, SSP_DMACR(pl022->virtbase));
570 writew(DEFAULT_SSP_REG_CPSR, SSP_CPSR(pl022->virtbase));
571 writew(DISABLE_ALL_INTERRUPTS, SSP_IMSC(pl022->virtbase));
572 writew(CLEAR_ALL_INTERRUPTS, SSP_ICR(pl022->virtbase));
573}
574
575/**
576 * This will write to TX and read from RX according to the parameters
577 * set in pl022.
578 */
579static void readwriter(struct pl022 *pl022)
580{
581
582 /*
583 * The FIFO depth is different inbetween primecell variants.
584 * I believe filling in too much in the FIFO might cause
585 * errons in 8bit wide transfers on ARM variants (just 8 words
586 * FIFO, means only 8x8 = 64 bits in FIFO) at least.
587 *
588 * FIXME: currently we have no logic to account for this.
589 * perhaps there is even something broken in HW regarding
590 * 8bit transfers (it doesn't fail on 16bit) so this needs
591 * more investigation...
592 */
593 dev_dbg(&pl022->adev->dev,
594 "%s, rx: %p, rxend: %p, tx: %p, txend: %p\n",
595 __func__, pl022->rx, pl022->rx_end, pl022->tx, pl022->tx_end);
596
597 /* Read as much as you can */
598 while ((readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_RNE)
599 && (pl022->rx < pl022->rx_end)) {
600 switch (pl022->read) {
601 case READING_NULL:
602 readw(SSP_DR(pl022->virtbase));
603 break;
604 case READING_U8:
605 *(u8 *) (pl022->rx) =
606 readw(SSP_DR(pl022->virtbase)) & 0xFFU;
607 break;
608 case READING_U16:
609 *(u16 *) (pl022->rx) =
610 (u16) readw(SSP_DR(pl022->virtbase));
611 break;
612 case READING_U32:
613 *(u32 *) (pl022->rx) =
614 readl(SSP_DR(pl022->virtbase));
615 break;
616 }
617 pl022->rx += (pl022->cur_chip->n_bytes);
618 }
619 /*
620 * Write as much as you can, while keeping an eye on the RX FIFO!
621 */
622 while ((readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_TNF)
623 && (pl022->tx < pl022->tx_end)) {
624 switch (pl022->write) {
625 case WRITING_NULL:
626 writew(0x0, SSP_DR(pl022->virtbase));
627 break;
628 case WRITING_U8:
629 writew(*(u8 *) (pl022->tx), SSP_DR(pl022->virtbase));
630 break;
631 case WRITING_U16:
632 writew((*(u16 *) (pl022->tx)), SSP_DR(pl022->virtbase));
633 break;
634 case WRITING_U32:
635 writel(*(u32 *) (pl022->tx), SSP_DR(pl022->virtbase));
636 break;
637 }
638 pl022->tx += (pl022->cur_chip->n_bytes);
639 /*
640 * This inner reader takes care of things appearing in the RX
641 * FIFO as we're transmitting. This will happen a lot since the
642 * clock starts running when you put things into the TX FIFO,
643 * and then things are continously clocked into the RX FIFO.
644 */
645 while ((readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_RNE)
646 && (pl022->rx < pl022->rx_end)) {
647 switch (pl022->read) {
648 case READING_NULL:
649 readw(SSP_DR(pl022->virtbase));
650 break;
651 case READING_U8:
652 *(u8 *) (pl022->rx) =
653 readw(SSP_DR(pl022->virtbase)) & 0xFFU;
654 break;
655 case READING_U16:
656 *(u16 *) (pl022->rx) =
657 (u16) readw(SSP_DR(pl022->virtbase));
658 break;
659 case READING_U32:
660 *(u32 *) (pl022->rx) =
661 readl(SSP_DR(pl022->virtbase));
662 break;
663 }
664 pl022->rx += (pl022->cur_chip->n_bytes);
665 }
666 }
667 /*
668 * When we exit here the TX FIFO should be full and the RX FIFO
669 * should be empty
670 */
671}
672
673
674/**
675 * next_transfer - Move to the Next transfer in the current spi message
676 * @pl022: SSP driver private data structure
677 *
678 * This function moves though the linked list of spi transfers in the
679 * current spi message and returns with the state of current spi
680 * message i.e whether its last transfer is done(STATE_DONE) or
681 * Next transfer is ready(STATE_RUNNING)
682 */
683static void *next_transfer(struct pl022 *pl022)
684{
685 struct spi_message *msg = pl022->cur_msg;
686 struct spi_transfer *trans = pl022->cur_transfer;
687
688 /* Move to next transfer */
689 if (trans->transfer_list.next != &msg->transfers) {
690 pl022->cur_transfer =
691 list_entry(trans->transfer_list.next,
692 struct spi_transfer, transfer_list);
693 return STATE_RUNNING;
694 }
695 return STATE_DONE;
696}
697/**
698 * pl022_interrupt_handler - Interrupt handler for SSP controller
699 *
700 * This function handles interrupts generated for an interrupt based transfer.
701 * If a receive overrun (ROR) interrupt is there then we disable SSP, flag the
702 * current message's state as STATE_ERROR and schedule the tasklet
703 * pump_transfers which will do the postprocessing of the current message by
704 * calling giveback(). Otherwise it reads data from RX FIFO till there is no
705 * more data, and writes data in TX FIFO till it is not full. If we complete
706 * the transfer we move to the next transfer and schedule the tasklet.
707 */
708static irqreturn_t pl022_interrupt_handler(int irq, void *dev_id)
709{
710 struct pl022 *pl022 = dev_id;
711 struct spi_message *msg = pl022->cur_msg;
712 u16 irq_status = 0;
713 u16 flag = 0;
714
715 if (unlikely(!msg)) {
716 dev_err(&pl022->adev->dev,
717 "bad message state in interrupt handler");
718 /* Never fail */
719 return IRQ_HANDLED;
720 }
721
722 /* Read the Interrupt Status Register */
723 irq_status = readw(SSP_MIS(pl022->virtbase));
724
725 if (unlikely(!irq_status))
726 return IRQ_NONE;
727
728 /* This handles the error code interrupts */
729 if (unlikely(irq_status & SSP_MIS_MASK_RORMIS)) {
730 /*
731 * Overrun interrupt - bail out since our Data has been
732 * corrupted
733 */
734 dev_err(&pl022->adev->dev,
735 "FIFO overrun\n");
736 if (readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_RFF)
737 dev_err(&pl022->adev->dev,
738 "RXFIFO is full\n");
739 if (readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_TNF)
740 dev_err(&pl022->adev->dev,
741 "TXFIFO is full\n");
742
743 /*
744 * Disable and clear interrupts, disable SSP,
745 * mark message with bad status so it can be
746 * retried.
747 */
748 writew(DISABLE_ALL_INTERRUPTS,
749 SSP_IMSC(pl022->virtbase));
750 writew(CLEAR_ALL_INTERRUPTS, SSP_ICR(pl022->virtbase));
751 writew((readw(SSP_CR1(pl022->virtbase)) &
752 (~SSP_CR1_MASK_SSE)), SSP_CR1(pl022->virtbase));
753 msg->state = STATE_ERROR;
754
755 /* Schedule message queue handler */
756 tasklet_schedule(&pl022->pump_transfers);
757 return IRQ_HANDLED;
758 }
759
760 readwriter(pl022);
761
762 if ((pl022->tx == pl022->tx_end) && (flag == 0)) {
763 flag = 1;
764 /* Disable Transmit interrupt */
765 writew(readw(SSP_IMSC(pl022->virtbase)) &
766 (~SSP_IMSC_MASK_TXIM),
767 SSP_IMSC(pl022->virtbase));
768 }
769
770 /*
771 * Since all transactions must write as much as shall be read,
772 * we can conclude the entire transaction once RX is complete.
773 * At this point, all TX will always be finished.
774 */
775 if (pl022->rx >= pl022->rx_end) {
776 writew(DISABLE_ALL_INTERRUPTS,
777 SSP_IMSC(pl022->virtbase));
778 writew(CLEAR_ALL_INTERRUPTS, SSP_ICR(pl022->virtbase));
779 if (unlikely(pl022->rx > pl022->rx_end)) {
780 dev_warn(&pl022->adev->dev, "read %u surplus "
781 "bytes (did you request an odd "
782 "number of bytes on a 16bit bus?)\n",
783 (u32) (pl022->rx - pl022->rx_end));
784 }
785 /* Update total bytes transfered */
786 msg->actual_length += pl022->cur_transfer->len;
787 if (pl022->cur_transfer->cs_change)
788 pl022->cur_chip->
789 cs_control(SSP_CHIP_DESELECT);
790 /* Move to next transfer */
791 msg->state = next_transfer(pl022);
792 tasklet_schedule(&pl022->pump_transfers);
793 return IRQ_HANDLED;
794 }
795
796 return IRQ_HANDLED;
797}
798
799/**
800 * This sets up the pointers to memory for the next message to
801 * send out on the SPI bus.
802 */
803static int set_up_next_transfer(struct pl022 *pl022,
804 struct spi_transfer *transfer)
805{
806 int residue;
807
808 /* Sanity check the message for this bus width */
809 residue = pl022->cur_transfer->len % pl022->cur_chip->n_bytes;
810 if (unlikely(residue != 0)) {
811 dev_err(&pl022->adev->dev,
812 "message of %u bytes to transmit but the current "
813 "chip bus has a data width of %u bytes!\n",
814 pl022->cur_transfer->len,
815 pl022->cur_chip->n_bytes);
816 dev_err(&pl022->adev->dev, "skipping this message\n");
817 return -EIO;
818 }
819 pl022->tx = (void *)transfer->tx_buf;
820 pl022->tx_end = pl022->tx + pl022->cur_transfer->len;
821 pl022->rx = (void *)transfer->rx_buf;
822 pl022->rx_end = pl022->rx + pl022->cur_transfer->len;
823 pl022->write =
824 pl022->tx ? pl022->cur_chip->write : WRITING_NULL;
825 pl022->read = pl022->rx ? pl022->cur_chip->read : READING_NULL;
826 return 0;
827}
828
829/**
830 * pump_transfers - Tasklet function which schedules next interrupt transfer
831 * when running in interrupt transfer mode.
832 * @data: SSP driver private data structure
833 *
834 */
835static void pump_transfers(unsigned long data)
836{
837 struct pl022 *pl022 = (struct pl022 *) data;
838 struct spi_message *message = NULL;
839 struct spi_transfer *transfer = NULL;
840 struct spi_transfer *previous = NULL;
841
842 /* Get current state information */
843 message = pl022->cur_msg;
844 transfer = pl022->cur_transfer;
845
846 /* Handle for abort */
847 if (message->state == STATE_ERROR) {
848 message->status = -EIO;
849 giveback(pl022);
850 return;
851 }
852
853 /* Handle end of message */
854 if (message->state == STATE_DONE) {
855 message->status = 0;
856 giveback(pl022);
857 return;
858 }
859
860 /* Delay if requested at end of transfer before CS change */
861 if (message->state == STATE_RUNNING) {
862 previous = list_entry(transfer->transfer_list.prev,
863 struct spi_transfer,
864 transfer_list);
865 if (previous->delay_usecs)
866 /*
867 * FIXME: This runs in interrupt context.
868 * Is this really smart?
869 */
870 udelay(previous->delay_usecs);
871
872 /* Drop chip select only if cs_change is requested */
873 if (previous->cs_change)
874 pl022->cur_chip->cs_control(SSP_CHIP_SELECT);
875 } else {
876 /* STATE_START */
877 message->state = STATE_RUNNING;
878 }
879
880 if (set_up_next_transfer(pl022, transfer)) {
881 message->state = STATE_ERROR;
882 message->status = -EIO;
883 giveback(pl022);
884 return;
885 }
886 /* Flush the FIFOs and let's go! */
887 flush(pl022);
888 writew(ENABLE_ALL_INTERRUPTS, SSP_IMSC(pl022->virtbase));
889}
890
891/**
892 * NOT IMPLEMENTED
893 * configure_dma - It configures the DMA pipes for DMA transfers
894 * @data: SSP driver's private data structure
895 *
896 */
897static int configure_dma(void *data)
898{
899 struct pl022 *pl022 = data;
900 dev_dbg(&pl022->adev->dev, "configure DMA\n");
901 return -ENOTSUPP;
902}
903
904/**
905 * do_dma_transfer - It handles transfers of the current message
906 * if it is DMA xfer.
907 * NOT FULLY IMPLEMENTED
908 * @data: SSP driver's private data structure
909 */
910static void do_dma_transfer(void *data)
911{
912 struct pl022 *pl022 = data;
913
914 if (configure_dma(data)) {
915 dev_dbg(&pl022->adev->dev, "configuration of DMA Failed!\n");
916 goto err_config_dma;
917 }
918
919 /* TODO: Implememt DMA setup of pipes here */
920
921 /* Enable target chip, set up transfer */
922 pl022->cur_chip->cs_control(SSP_CHIP_SELECT);
923 if (set_up_next_transfer(pl022, pl022->cur_transfer)) {
924 /* Error path */
925 pl022->cur_msg->state = STATE_ERROR;
926 pl022->cur_msg->status = -EIO;
927 giveback(pl022);
928 return;
929 }
930 /* Enable SSP */
931 writew((readw(SSP_CR1(pl022->virtbase)) | SSP_CR1_MASK_SSE),
932 SSP_CR1(pl022->virtbase));
933
934 /* TODO: Enable the DMA transfer here */
935 return;
936
937 err_config_dma:
938 pl022->cur_msg->state = STATE_ERROR;
939 pl022->cur_msg->status = -EIO;
940 giveback(pl022);
941 return;
942}
943
944static void do_interrupt_transfer(void *data)
945{
946 struct pl022 *pl022 = data;
947
948 /* Enable target chip */
949 pl022->cur_chip->cs_control(SSP_CHIP_SELECT);
950 if (set_up_next_transfer(pl022, pl022->cur_transfer)) {
951 /* Error path */
952 pl022->cur_msg->state = STATE_ERROR;
953 pl022->cur_msg->status = -EIO;
954 giveback(pl022);
955 return;
956 }
957 /* Enable SSP, turn on interrupts */
958 writew((readw(SSP_CR1(pl022->virtbase)) | SSP_CR1_MASK_SSE),
959 SSP_CR1(pl022->virtbase));
960 writew(ENABLE_ALL_INTERRUPTS, SSP_IMSC(pl022->virtbase));
961}
962
963static void do_polling_transfer(void *data)
964{
965 struct pl022 *pl022 = data;
966 struct spi_message *message = NULL;
967 struct spi_transfer *transfer = NULL;
968 struct spi_transfer *previous = NULL;
969 struct chip_data *chip;
970
971 chip = pl022->cur_chip;
972 message = pl022->cur_msg;
973
974 while (message->state != STATE_DONE) {
975 /* Handle for abort */
976 if (message->state == STATE_ERROR)
977 break;
978 transfer = pl022->cur_transfer;
979
980 /* Delay if requested at end of transfer */
981 if (message->state == STATE_RUNNING) {
982 previous =
983 list_entry(transfer->transfer_list.prev,
984 struct spi_transfer, transfer_list);
985 if (previous->delay_usecs)
986 udelay(previous->delay_usecs);
987 if (previous->cs_change)
988 pl022->cur_chip->cs_control(SSP_CHIP_SELECT);
989 } else {
990 /* STATE_START */
991 message->state = STATE_RUNNING;
992 pl022->cur_chip->cs_control(SSP_CHIP_SELECT);
993 }
994
995 /* Configuration Changing Per Transfer */
996 if (set_up_next_transfer(pl022, transfer)) {
997 /* Error path */
998 message->state = STATE_ERROR;
999 break;
1000 }
1001 /* Flush FIFOs and enable SSP */
1002 flush(pl022);
1003 writew((readw(SSP_CR1(pl022->virtbase)) | SSP_CR1_MASK_SSE),
1004 SSP_CR1(pl022->virtbase));
1005
1006 dev_dbg(&pl022->adev->dev, "POLLING TRANSFER ONGOING ... \n");
1007 /* FIXME: insert a timeout so we don't hang here indefinately */
1008 while (pl022->tx < pl022->tx_end || pl022->rx < pl022->rx_end)
1009 readwriter(pl022);
1010
1011 /* Update total byte transfered */
1012 message->actual_length += pl022->cur_transfer->len;
1013 if (pl022->cur_transfer->cs_change)
1014 pl022->cur_chip->cs_control(SSP_CHIP_DESELECT);
1015 /* Move to next transfer */
1016 message->state = next_transfer(pl022);
1017 }
1018
1019 /* Handle end of message */
1020 if (message->state == STATE_DONE)
1021 message->status = 0;
1022 else
1023 message->status = -EIO;
1024
1025 giveback(pl022);
1026 return;
1027}
1028
1029/**
1030 * pump_messages - Workqueue function which processes spi message queue
1031 * @data: pointer to private data of SSP driver
1032 *
1033 * This function checks if there is any spi message in the queue that
1034 * needs processing and delegate control to appropriate function
1035 * do_polling_transfer()/do_interrupt_transfer()/do_dma_transfer()
1036 * based on the kind of the transfer
1037 *
1038 */
1039static void pump_messages(struct work_struct *work)
1040{
1041 struct pl022 *pl022 =
1042 container_of(work, struct pl022, pump_messages);
1043 unsigned long flags;
1044
1045 /* Lock queue and check for queue work */
1046 spin_lock_irqsave(&pl022->queue_lock, flags);
1047 if (list_empty(&pl022->queue) || pl022->run == QUEUE_STOPPED) {
1048 pl022->busy = 0;
1049 spin_unlock_irqrestore(&pl022->queue_lock, flags);
1050 return;
1051 }
1052 /* Make sure we are not already running a message */
1053 if (pl022->cur_msg) {
1054 spin_unlock_irqrestore(&pl022->queue_lock, flags);
1055 return;
1056 }
1057 /* Extract head of queue */
1058 pl022->cur_msg =
1059 list_entry(pl022->queue.next, struct spi_message, queue);
1060
1061 list_del_init(&pl022->cur_msg->queue);
1062 pl022->busy = 1;
1063 spin_unlock_irqrestore(&pl022->queue_lock, flags);
1064
1065 /* Initial message state */
1066 pl022->cur_msg->state = STATE_START;
1067 pl022->cur_transfer = list_entry(pl022->cur_msg->transfers.next,
1068 struct spi_transfer,
1069 transfer_list);
1070
1071 /* Setup the SPI using the per chip configuration */
1072 pl022->cur_chip = spi_get_ctldata(pl022->cur_msg->spi);
1073 /*
1074 * We enable the clock here, then the clock will be disabled when
1075 * giveback() is called in each method (poll/interrupt/DMA)
1076 */
1077 clk_enable(pl022->clk);
1078 restore_state(pl022);
1079 flush(pl022);
1080
1081 if (pl022->cur_chip->xfer_type == POLLING_TRANSFER)
1082 do_polling_transfer(pl022);
1083 else if (pl022->cur_chip->xfer_type == INTERRUPT_TRANSFER)
1084 do_interrupt_transfer(pl022);
1085 else
1086 do_dma_transfer(pl022);
1087}
1088
1089
1090static int __init init_queue(struct pl022 *pl022)
1091{
1092 INIT_LIST_HEAD(&pl022->queue);
1093 spin_lock_init(&pl022->queue_lock);
1094
1095 pl022->run = QUEUE_STOPPED;
1096 pl022->busy = 0;
1097
1098 tasklet_init(&pl022->pump_transfers,
1099 pump_transfers, (unsigned long)pl022);
1100
1101 INIT_WORK(&pl022->pump_messages, pump_messages);
1102 pl022->workqueue = create_singlethread_workqueue(
1103 dev_name(pl022->master->dev.parent));
1104 if (pl022->workqueue == NULL)
1105 return -EBUSY;
1106
1107 return 0;
1108}
1109
1110
1111static int start_queue(struct pl022 *pl022)
1112{
1113 unsigned long flags;
1114
1115 spin_lock_irqsave(&pl022->queue_lock, flags);
1116
1117 if (pl022->run == QUEUE_RUNNING || pl022->busy) {
1118 spin_unlock_irqrestore(&pl022->queue_lock, flags);
1119 return -EBUSY;
1120 }
1121
1122 pl022->run = QUEUE_RUNNING;
1123 pl022->cur_msg = NULL;
1124 pl022->cur_transfer = NULL;
1125 pl022->cur_chip = NULL;
1126 spin_unlock_irqrestore(&pl022->queue_lock, flags);
1127
1128 queue_work(pl022->workqueue, &pl022->pump_messages);
1129
1130 return 0;
1131}
1132
1133
1134static int stop_queue(struct pl022 *pl022)
1135{
1136 unsigned long flags;
1137 unsigned limit = 500;
1138 int status = 0;
1139
1140 spin_lock_irqsave(&pl022->queue_lock, flags);
1141
1142 /* This is a bit lame, but is optimized for the common execution path.
1143 * A wait_queue on the pl022->busy could be used, but then the common
1144 * execution path (pump_messages) would be required to call wake_up or
1145 * friends on every SPI message. Do this instead */
1146 pl022->run = QUEUE_STOPPED;
1147 while (!list_empty(&pl022->queue) && pl022->busy && limit--) {
1148 spin_unlock_irqrestore(&pl022->queue_lock, flags);
1149 msleep(10);
1150 spin_lock_irqsave(&pl022->queue_lock, flags);
1151 }
1152
1153 if (!list_empty(&pl022->queue) || pl022->busy)
1154 status = -EBUSY;
1155
1156 spin_unlock_irqrestore(&pl022->queue_lock, flags);
1157
1158 return status;
1159}
1160
1161static int destroy_queue(struct pl022 *pl022)
1162{
1163 int status;
1164
1165 status = stop_queue(pl022);
1166 /* we are unloading the module or failing to load (only two calls
1167 * to this routine), and neither call can handle a return value.
1168 * However, destroy_workqueue calls flush_workqueue, and that will
1169 * block until all work is done. If the reason that stop_queue
1170 * timed out is that the work will never finish, then it does no
1171 * good to call destroy_workqueue, so return anyway. */
1172 if (status != 0)
1173 return status;
1174
1175 destroy_workqueue(pl022->workqueue);
1176
1177 return 0;
1178}
1179
1180static int verify_controller_parameters(struct pl022 *pl022,
1181 struct pl022_config_chip *chip_info)
1182{
1183 if ((chip_info->lbm != LOOPBACK_ENABLED)
1184 && (chip_info->lbm != LOOPBACK_DISABLED)) {
1185 dev_err(chip_info->dev,
1186 "loopback Mode is configured incorrectly\n");
1187 return -EINVAL;
1188 }
1189 if ((chip_info->iface < SSP_INTERFACE_MOTOROLA_SPI)
1190 || (chip_info->iface > SSP_INTERFACE_UNIDIRECTIONAL)) {
1191 dev_err(chip_info->dev,
1192 "interface is configured incorrectly\n");
1193 return -EINVAL;
1194 }
1195 if ((chip_info->iface == SSP_INTERFACE_UNIDIRECTIONAL) &&
1196 (!pl022->vendor->unidir)) {
1197 dev_err(chip_info->dev,
1198 "unidirectional mode not supported in this "
1199 "hardware version\n");
1200 return -EINVAL;
1201 }
1202 if ((chip_info->hierarchy != SSP_MASTER)
1203 && (chip_info->hierarchy != SSP_SLAVE)) {
1204 dev_err(chip_info->dev,
1205 "hierarchy is configured incorrectly\n");
1206 return -EINVAL;
1207 }
1208 if (((chip_info->clk_freq).cpsdvsr < CPSDVR_MIN)
1209 || ((chip_info->clk_freq).cpsdvsr > CPSDVR_MAX)) {
1210 dev_err(chip_info->dev,
1211 "cpsdvsr is configured incorrectly\n");
1212 return -EINVAL;
1213 }
1214 if ((chip_info->endian_rx != SSP_RX_MSB)
1215 && (chip_info->endian_rx != SSP_RX_LSB)) {
1216 dev_err(chip_info->dev,
1217 "RX FIFO endianess is configured incorrectly\n");
1218 return -EINVAL;
1219 }
1220 if ((chip_info->endian_tx != SSP_TX_MSB)
1221 && (chip_info->endian_tx != SSP_TX_LSB)) {
1222 dev_err(chip_info->dev,
1223 "TX FIFO endianess is configured incorrectly\n");
1224 return -EINVAL;
1225 }
1226 if ((chip_info->data_size < SSP_DATA_BITS_4)
1227 || (chip_info->data_size > SSP_DATA_BITS_32)) {
1228 dev_err(chip_info->dev,
1229 "DATA Size is configured incorrectly\n");
1230 return -EINVAL;
1231 }
1232 if ((chip_info->com_mode != INTERRUPT_TRANSFER)
1233 && (chip_info->com_mode != DMA_TRANSFER)
1234 && (chip_info->com_mode != POLLING_TRANSFER)) {
1235 dev_err(chip_info->dev,
1236 "Communication mode is configured incorrectly\n");
1237 return -EINVAL;
1238 }
1239 if ((chip_info->rx_lev_trig < SSP_RX_1_OR_MORE_ELEM)
1240 || (chip_info->rx_lev_trig > SSP_RX_32_OR_MORE_ELEM)) {
1241 dev_err(chip_info->dev,
1242 "RX FIFO Trigger Level is configured incorrectly\n");
1243 return -EINVAL;
1244 }
1245 if ((chip_info->tx_lev_trig < SSP_TX_1_OR_MORE_EMPTY_LOC)
1246 || (chip_info->tx_lev_trig > SSP_TX_32_OR_MORE_EMPTY_LOC)) {
1247 dev_err(chip_info->dev,
1248 "TX FIFO Trigger Level is configured incorrectly\n");
1249 return -EINVAL;
1250 }
1251 if (chip_info->iface == SSP_INTERFACE_MOTOROLA_SPI) {
1252 if ((chip_info->clk_phase != SSP_CLK_RISING_EDGE)
1253 && (chip_info->clk_phase != SSP_CLK_FALLING_EDGE)) {
1254 dev_err(chip_info->dev,
1255 "Clock Phase is configured incorrectly\n");
1256 return -EINVAL;
1257 }
1258 if ((chip_info->clk_pol != SSP_CLK_POL_IDLE_LOW)
1259 && (chip_info->clk_pol != SSP_CLK_POL_IDLE_HIGH)) {
1260 dev_err(chip_info->dev,
1261 "Clock Polarity is configured incorrectly\n");
1262 return -EINVAL;
1263 }
1264 }
1265 if (chip_info->iface == SSP_INTERFACE_NATIONAL_MICROWIRE) {
1266 if ((chip_info->ctrl_len < SSP_BITS_4)
1267 || (chip_info->ctrl_len > SSP_BITS_32)) {
1268 dev_err(chip_info->dev,
1269 "CTRL LEN is configured incorrectly\n");
1270 return -EINVAL;
1271 }
1272 if ((chip_info->wait_state != SSP_MWIRE_WAIT_ZERO)
1273 && (chip_info->wait_state != SSP_MWIRE_WAIT_ONE)) {
1274 dev_err(chip_info->dev,
1275 "Wait State is configured incorrectly\n");
1276 return -EINVAL;
1277 }
1278 if ((chip_info->duplex != SSP_MICROWIRE_CHANNEL_FULL_DUPLEX)
1279 && (chip_info->duplex !=
1280 SSP_MICROWIRE_CHANNEL_HALF_DUPLEX)) {
1281 dev_err(chip_info->dev,
1282 "DUPLEX is configured incorrectly\n");
1283 return -EINVAL;
1284 }
1285 }
1286 if (chip_info->cs_control == NULL) {
1287 dev_warn(chip_info->dev,
1288 "Chip Select Function is NULL for this chip\n");
1289 chip_info->cs_control = null_cs_control;
1290 }
1291 return 0;
1292}
1293
1294/**
1295 * pl022_transfer - transfer function registered to SPI master framework
1296 * @spi: spi device which is requesting transfer
1297 * @msg: spi message which is to handled is queued to driver queue
1298 *
1299 * This function is registered to the SPI framework for this SPI master
1300 * controller. It will queue the spi_message in the queue of driver if
1301 * the queue is not stopped and return.
1302 */
1303static int pl022_transfer(struct spi_device *spi, struct spi_message *msg)
1304{
1305 struct pl022 *pl022 = spi_master_get_devdata(spi->master);
1306 unsigned long flags;
1307
1308 spin_lock_irqsave(&pl022->queue_lock, flags);
1309
1310 if (pl022->run == QUEUE_STOPPED) {
1311 spin_unlock_irqrestore(&pl022->queue_lock, flags);
1312 return -ESHUTDOWN;
1313 }
1314 msg->actual_length = 0;
1315 msg->status = -EINPROGRESS;
1316 msg->state = STATE_START;
1317
1318 list_add_tail(&msg->queue, &pl022->queue);
1319 if (pl022->run == QUEUE_RUNNING && !pl022->busy)
1320 queue_work(pl022->workqueue, &pl022->pump_messages);
1321
1322 spin_unlock_irqrestore(&pl022->queue_lock, flags);
1323 return 0;
1324}
1325
1326static int calculate_effective_freq(struct pl022 *pl022,
1327 int freq,
1328 struct ssp_clock_params *clk_freq)
1329{
1330 /* Lets calculate the frequency parameters */
1331 u16 cpsdvsr = 2;
1332 u16 scr = 0;
1333 bool freq_found = false;
1334 u32 rate;
1335 u32 max_tclk;
1336 u32 min_tclk;
1337
1338 rate = clk_get_rate(pl022->clk);
1339 /* cpsdvscr = 2 & scr 0 */
1340 max_tclk = (rate / (CPSDVR_MIN * (1 + SCR_MIN)));
1341 /* cpsdvsr = 254 & scr = 255 */
1342 min_tclk = (rate / (CPSDVR_MAX * (1 + SCR_MAX)));
1343
1344 if ((freq <= max_tclk) && (freq >= min_tclk)) {
1345 while (cpsdvsr <= CPSDVR_MAX && !freq_found) {
1346 while (scr <= SCR_MAX && !freq_found) {
1347 if ((rate /
1348 (cpsdvsr * (1 + scr))) > freq)
1349 scr += 1;
1350 else {
1351 /*
1352 * This bool is made true when
1353 * effective frequency >=
1354 * target frequency is found
1355 */
1356 freq_found = true;
1357 if ((rate /
1358 (cpsdvsr * (1 + scr))) != freq) {
1359 if (scr == SCR_MIN) {
1360 cpsdvsr -= 2;
1361 scr = SCR_MAX;
1362 } else
1363 scr -= 1;
1364 }
1365 }
1366 }
1367 if (!freq_found) {
1368 cpsdvsr += 2;
1369 scr = SCR_MIN;
1370 }
1371 }
1372 if (cpsdvsr != 0) {
1373 dev_dbg(&pl022->adev->dev,
1374 "SSP Effective Frequency is %u\n",
1375 (rate / (cpsdvsr * (1 + scr))));
1376 clk_freq->cpsdvsr = (u8) (cpsdvsr & 0xFF);
1377 clk_freq->scr = (u8) (scr & 0xFF);
1378 dev_dbg(&pl022->adev->dev,
1379 "SSP cpsdvsr = %d, scr = %d\n",
1380 clk_freq->cpsdvsr, clk_freq->scr);
1381 }
1382 } else {
1383 dev_err(&pl022->adev->dev,
1384 "controller data is incorrect: out of range frequency");
1385 return -EINVAL;
1386 }
1387 return 0;
1388}
1389
1390/**
1391 * NOT IMPLEMENTED
1392 * process_dma_info - Processes the DMA info provided by client drivers
1393 * @chip_info: chip info provided by client device
1394 * @chip: Runtime state maintained by the SSP controller for each spi device
1395 *
1396 * This function processes and stores DMA config provided by client driver
1397 * into the runtime state maintained by the SSP controller driver
1398 */
1399static int process_dma_info(struct pl022_config_chip *chip_info,
1400 struct chip_data *chip)
1401{
1402 dev_err(chip_info->dev,
1403 "cannot process DMA info, DMA not implemented!\n");
1404 return -ENOTSUPP;
1405}
1406
1407/**
1408 * pl022_setup - setup function registered to SPI master framework
1409 * @spi: spi device which is requesting setup
1410 *
1411 * This function is registered to the SPI framework for this SPI master
1412 * controller. If it is the first time when setup is called by this device,
1413 * this function will initialize the runtime state for this chip and save
1414 * the same in the device structure. Else it will update the runtime info
1415 * with the updated chip info. Nothing is really being written to the
1416 * controller hardware here, that is not done until the actual transfer
1417 * commence.
1418 */
1419
1420/* FIXME: JUST GUESSING the spi->mode bits understood by this driver */
1421#define MODEBITS (SPI_CPOL | SPI_CPHA | SPI_CS_HIGH \
1422 | SPI_LSB_FIRST | SPI_LOOP)
1423
1424static int pl022_setup(struct spi_device *spi)
1425{
1426 struct pl022_config_chip *chip_info;
1427 struct chip_data *chip;
1428 int status = 0;
1429 struct pl022 *pl022 = spi_master_get_devdata(spi->master);
1430
1431 if (spi->mode & ~MODEBITS) {
1432 dev_dbg(&spi->dev, "unsupported mode bits %x\n",
1433 spi->mode & ~MODEBITS);
1434 return -EINVAL;
1435 }
1436
1437 if (!spi->max_speed_hz)
1438 return -EINVAL;
1439
1440 /* Get controller_state if one is supplied */
1441 chip = spi_get_ctldata(spi);
1442
1443 if (chip == NULL) {
1444 chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL);
1445 if (!chip) {
1446 dev_err(&spi->dev,
1447 "cannot allocate controller state\n");
1448 return -ENOMEM;
1449 }
1450 dev_dbg(&spi->dev,
1451 "allocated memory for controller's runtime state\n");
1452 }
1453
1454 /* Get controller data if one is supplied */
1455 chip_info = spi->controller_data;
1456
1457 if (chip_info == NULL) {
1458 /* spi_board_info.controller_data not is supplied */
1459 dev_dbg(&spi->dev,
1460 "using default controller_data settings\n");
1461
1462 chip_info =
1463 kzalloc(sizeof(struct pl022_config_chip), GFP_KERNEL);
1464
1465 if (!chip_info) {
1466 dev_err(&spi->dev,
1467 "cannot allocate controller data\n");
1468 status = -ENOMEM;
1469 goto err_first_setup;
1470 }
1471
1472 dev_dbg(&spi->dev, "allocated memory for controller data\n");
1473
1474 /* Pointer back to the SPI device */
1475 chip_info->dev = &spi->dev;
1476 /*
1477 * Set controller data default values:
1478 * Polling is supported by default
1479 */
1480 chip_info->lbm = LOOPBACK_DISABLED;
1481 chip_info->com_mode = POLLING_TRANSFER;
1482 chip_info->iface = SSP_INTERFACE_MOTOROLA_SPI;
1483 chip_info->hierarchy = SSP_SLAVE;
1484 chip_info->slave_tx_disable = DO_NOT_DRIVE_TX;
1485 chip_info->endian_tx = SSP_TX_LSB;
1486 chip_info->endian_rx = SSP_RX_LSB;
1487 chip_info->data_size = SSP_DATA_BITS_12;
1488 chip_info->rx_lev_trig = SSP_RX_1_OR_MORE_ELEM;
1489 chip_info->tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC;
1490 chip_info->clk_phase = SSP_CLK_FALLING_EDGE;
1491 chip_info->clk_pol = SSP_CLK_POL_IDLE_LOW;
1492 chip_info->ctrl_len = SSP_BITS_8;
1493 chip_info->wait_state = SSP_MWIRE_WAIT_ZERO;
1494 chip_info->duplex = SSP_MICROWIRE_CHANNEL_FULL_DUPLEX;
1495 chip_info->cs_control = null_cs_control;
1496 } else {
1497 dev_dbg(&spi->dev,
1498 "using user supplied controller_data settings\n");
1499 }
1500
1501 /*
1502 * We can override with custom divisors, else we use the board
1503 * frequency setting
1504 */
1505 if ((0 == chip_info->clk_freq.cpsdvsr)
1506 && (0 == chip_info->clk_freq.scr)) {
1507 status = calculate_effective_freq(pl022,
1508 spi->max_speed_hz,
1509 &chip_info->clk_freq);
1510 if (status < 0)
1511 goto err_config_params;
1512 } else {
1513 if ((chip_info->clk_freq.cpsdvsr % 2) != 0)
1514 chip_info->clk_freq.cpsdvsr =
1515 chip_info->clk_freq.cpsdvsr - 1;
1516 }
1517 status = verify_controller_parameters(pl022, chip_info);
1518 if (status) {
1519 dev_err(&spi->dev, "controller data is incorrect");
1520 goto err_config_params;
1521 }
1522 /* Now set controller state based on controller data */
1523 chip->xfer_type = chip_info->com_mode;
1524 chip->cs_control = chip_info->cs_control;
1525
1526 if (chip_info->data_size <= 8) {
1527 dev_dbg(&spi->dev, "1 <= n <=8 bits per word\n");
1528 chip->n_bytes = 1;
1529 chip->read = READING_U8;
1530 chip->write = WRITING_U8;
1531 } else if (chip_info->data_size <= 16) {
1532 dev_dbg(&spi->dev, "9 <= n <= 16 bits per word\n");
1533 chip->n_bytes = 2;
1534 chip->read = READING_U16;
1535 chip->write = WRITING_U16;
1536 } else {
1537 if (pl022->vendor->max_bpw >= 32) {
1538 dev_dbg(&spi->dev, "17 <= n <= 32 bits per word\n");
1539 chip->n_bytes = 4;
1540 chip->read = READING_U32;
1541 chip->write = WRITING_U32;
1542 } else {
1543 dev_err(&spi->dev,
1544 "illegal data size for this controller!\n");
1545 dev_err(&spi->dev,
1546 "a standard pl022 can only handle "
1547 "1 <= n <= 16 bit words\n");
1548 goto err_config_params;
1549 }
1550 }
1551
1552 /* Now Initialize all register settings required for this chip */
1553 chip->cr0 = 0;
1554 chip->cr1 = 0;
1555 chip->dmacr = 0;
1556 chip->cpsr = 0;
1557 if ((chip_info->com_mode == DMA_TRANSFER)
1558 && ((pl022->master_info)->enable_dma)) {
1559 chip->enable_dma = 1;
1560 dev_dbg(&spi->dev, "DMA mode set in controller state\n");
1561 status = process_dma_info(chip_info, chip);
1562 if (status < 0)
1563 goto err_config_params;
1564 SSP_WRITE_BITS(chip->dmacr, SSP_DMA_ENABLED,
1565 SSP_DMACR_MASK_RXDMAE, 0);
1566 SSP_WRITE_BITS(chip->dmacr, SSP_DMA_ENABLED,
1567 SSP_DMACR_MASK_TXDMAE, 1);
1568 } else {
1569 chip->enable_dma = 0;
1570 dev_dbg(&spi->dev, "DMA mode NOT set in controller state\n");
1571 SSP_WRITE_BITS(chip->dmacr, SSP_DMA_DISABLED,
1572 SSP_DMACR_MASK_RXDMAE, 0);
1573 SSP_WRITE_BITS(chip->dmacr, SSP_DMA_DISABLED,
1574 SSP_DMACR_MASK_TXDMAE, 1);
1575 }
1576
1577 chip->cpsr = chip_info->clk_freq.cpsdvsr;
1578
1579 SSP_WRITE_BITS(chip->cr0, chip_info->data_size, SSP_CR0_MASK_DSS, 0);
1580 SSP_WRITE_BITS(chip->cr0, chip_info->duplex, SSP_CR0_MASK_HALFDUP, 5);
1581 SSP_WRITE_BITS(chip->cr0, chip_info->clk_pol, SSP_CR0_MASK_SPO, 6);
1582 SSP_WRITE_BITS(chip->cr0, chip_info->clk_phase, SSP_CR0_MASK_SPH, 7);
1583 SSP_WRITE_BITS(chip->cr0, chip_info->clk_freq.scr, SSP_CR0_MASK_SCR, 8);
1584 SSP_WRITE_BITS(chip->cr0, chip_info->ctrl_len, SSP_CR0_MASK_CSS, 16);
1585 SSP_WRITE_BITS(chip->cr0, chip_info->iface, SSP_CR0_MASK_FRF, 21);
1586 SSP_WRITE_BITS(chip->cr1, chip_info->lbm, SSP_CR1_MASK_LBM, 0);
1587 SSP_WRITE_BITS(chip->cr1, SSP_DISABLED, SSP_CR1_MASK_SSE, 1);
1588 SSP_WRITE_BITS(chip->cr1, chip_info->hierarchy, SSP_CR1_MASK_MS, 2);
1589 SSP_WRITE_BITS(chip->cr1, chip_info->slave_tx_disable, SSP_CR1_MASK_SOD, 3);
1590 SSP_WRITE_BITS(chip->cr1, chip_info->endian_rx, SSP_CR1_MASK_RENDN, 4);
1591 SSP_WRITE_BITS(chip->cr1, chip_info->endian_tx, SSP_CR1_MASK_TENDN, 5);
1592 SSP_WRITE_BITS(chip->cr1, chip_info->wait_state, SSP_CR1_MASK_MWAIT, 6);
1593 SSP_WRITE_BITS(chip->cr1, chip_info->rx_lev_trig, SSP_CR1_MASK_RXIFLSEL, 7);
1594 SSP_WRITE_BITS(chip->cr1, chip_info->tx_lev_trig, SSP_CR1_MASK_TXIFLSEL, 10);
1595
1596 /* Save controller_state */
1597 spi_set_ctldata(spi, chip);
1598 return status;
1599 err_config_params:
1600 err_first_setup:
1601 kfree(chip);
1602 return status;
1603}
1604
1605/**
1606 * pl022_cleanup - cleanup function registered to SPI master framework
1607 * @spi: spi device which is requesting cleanup
1608 *
1609 * This function is registered to the SPI framework for this SPI master
1610 * controller. It will free the runtime state of chip.
1611 */
1612static void pl022_cleanup(struct spi_device *spi)
1613{
1614 struct chip_data *chip = spi_get_ctldata(spi);
1615
1616 spi_set_ctldata(spi, NULL);
1617 kfree(chip);
1618}
1619
1620
1621static int __init
1622pl022_probe(struct amba_device *adev, struct amba_id *id)
1623{
1624 struct device *dev = &adev->dev;
1625 struct pl022_ssp_controller *platform_info = adev->dev.platform_data;
1626 struct spi_master *master;
1627 struct pl022 *pl022 = NULL; /*Data for this driver */
1628 int status = 0;
1629
1630 dev_info(&adev->dev,
1631 "ARM PL022 driver, device ID: 0x%08x\n", adev->periphid);
1632 if (platform_info == NULL) {
1633 dev_err(&adev->dev, "probe - no platform data supplied\n");
1634 status = -ENODEV;
1635 goto err_no_pdata;
1636 }
1637
1638 /* Allocate master with space for data */
1639 master = spi_alloc_master(dev, sizeof(struct pl022));
1640 if (master == NULL) {
1641 dev_err(&adev->dev, "probe - cannot alloc SPI master\n");
1642 status = -ENOMEM;
1643 goto err_no_master;
1644 }
1645
1646 pl022 = spi_master_get_devdata(master);
1647 pl022->master = master;
1648 pl022->master_info = platform_info;
1649 pl022->adev = adev;
1650 pl022->vendor = id->data;
1651
1652 /*
1653 * Bus Number Which has been Assigned to this SSP controller
1654 * on this board
1655 */
1656 master->bus_num = platform_info->bus_id;
1657 master->num_chipselect = platform_info->num_chipselect;
1658 master->cleanup = pl022_cleanup;
1659 master->setup = pl022_setup;
1660 master->transfer = pl022_transfer;
1661
1662 dev_dbg(&adev->dev, "BUSNO: %d\n", master->bus_num);
1663
1664 status = amba_request_regions(adev, NULL);
1665 if (status)
1666 goto err_no_ioregion;
1667
1668 pl022->virtbase = ioremap(adev->res.start, resource_size(&adev->res));
1669 if (pl022->virtbase == NULL) {
1670 status = -ENOMEM;
1671 goto err_no_ioremap;
1672 }
1673 printk(KERN_INFO "pl022: mapped registers from 0x%08x to %p\n",
1674 adev->res.start, pl022->virtbase);
1675
1676 pl022->clk = clk_get(&adev->dev, NULL);
1677 if (IS_ERR(pl022->clk)) {
1678 status = PTR_ERR(pl022->clk);
1679 dev_err(&adev->dev, "could not retrieve SSP/SPI bus clock\n");
1680 goto err_no_clk;
1681 }
1682
1683 /* Disable SSP */
1684 clk_enable(pl022->clk);
1685 writew((readw(SSP_CR1(pl022->virtbase)) & (~SSP_CR1_MASK_SSE)),
1686 SSP_CR1(pl022->virtbase));
1687 load_ssp_default_config(pl022);
1688 clk_disable(pl022->clk);
1689
1690 status = request_irq(adev->irq[0], pl022_interrupt_handler, 0, "pl022",
1691 pl022);
1692 if (status < 0) {
1693 dev_err(&adev->dev, "probe - cannot get IRQ (%d)\n", status);
1694 goto err_no_irq;
1695 }
1696 /* Initialize and start queue */
1697 status = init_queue(pl022);
1698 if (status != 0) {
1699 dev_err(&adev->dev, "probe - problem initializing queue\n");
1700 goto err_init_queue;
1701 }
1702 status = start_queue(pl022);
1703 if (status != 0) {
1704 dev_err(&adev->dev, "probe - problem starting queue\n");
1705 goto err_start_queue;
1706 }
1707 /* Register with the SPI framework */
1708 amba_set_drvdata(adev, pl022);
1709 status = spi_register_master(master);
1710 if (status != 0) {
1711 dev_err(&adev->dev,
1712 "probe - problem registering spi master\n");
1713 goto err_spi_register;
1714 }
1715 dev_dbg(dev, "probe succeded\n");
1716 return 0;
1717
1718 err_spi_register:
1719 err_start_queue:
1720 err_init_queue:
1721 destroy_queue(pl022);
1722 free_irq(adev->irq[0], pl022);
1723 err_no_irq:
1724 clk_put(pl022->clk);
1725 err_no_clk:
1726 iounmap(pl022->virtbase);
1727 err_no_ioremap:
1728 amba_release_regions(adev);
1729 err_no_ioregion:
1730 spi_master_put(master);
1731 err_no_master:
1732 err_no_pdata:
1733 return status;
1734}
1735
1736static int __exit
1737pl022_remove(struct amba_device *adev)
1738{
1739 struct pl022 *pl022 = amba_get_drvdata(adev);
1740 int status = 0;
1741 if (!pl022)
1742 return 0;
1743
1744 /* Remove the queue */
1745 status = destroy_queue(pl022);
1746 if (status != 0) {
1747 dev_err(&adev->dev,
1748 "queue remove failed (%d)\n", status);
1749 return status;
1750 }
1751 load_ssp_default_config(pl022);
1752 free_irq(adev->irq[0], pl022);
1753 clk_disable(pl022->clk);
1754 clk_put(pl022->clk);
1755 iounmap(pl022->virtbase);
1756 amba_release_regions(adev);
1757 tasklet_disable(&pl022->pump_transfers);
1758 spi_unregister_master(pl022->master);
1759 spi_master_put(pl022->master);
1760 amba_set_drvdata(adev, NULL);
1761 dev_dbg(&adev->dev, "remove succeded\n");
1762 return 0;
1763}
1764
1765#ifdef CONFIG_PM
1766static int pl022_suspend(struct amba_device *adev, pm_message_t state)
1767{
1768 struct pl022 *pl022 = amba_get_drvdata(adev);
1769 int status = 0;
1770
1771 status = stop_queue(pl022);
1772 if (status) {
1773 dev_warn(&adev->dev, "suspend cannot stop queue\n");
1774 return status;
1775 }
1776
1777 clk_enable(pl022->clk);
1778 load_ssp_default_config(pl022);
1779 clk_disable(pl022->clk);
1780 dev_dbg(&adev->dev, "suspended\n");
1781 return 0;
1782}
1783
1784static int pl022_resume(struct amba_device *adev)
1785{
1786 struct pl022 *pl022 = amba_get_drvdata(adev);
1787 int status = 0;
1788
1789 /* Start the queue running */
1790 status = start_queue(pl022);
1791 if (status)
1792 dev_err(&adev->dev, "problem starting queue (%d)\n", status);
1793 else
1794 dev_dbg(&adev->dev, "resumed\n");
1795
1796 return status;
1797}
1798#else
1799#define pl022_suspend NULL
1800#define pl022_resume NULL
1801#endif /* CONFIG_PM */
1802
1803static struct vendor_data vendor_arm = {
1804 .fifodepth = 8,
1805 .max_bpw = 16,
1806 .unidir = false,
1807};
1808
1809
1810static struct vendor_data vendor_st = {
1811 .fifodepth = 32,
1812 .max_bpw = 32,
1813 .unidir = false,
1814};
1815
1816static struct amba_id pl022_ids[] = {
1817 {
1818 /*
1819 * ARM PL022 variant, this has a 16bit wide
1820 * and 8 locations deep TX/RX FIFO
1821 */
1822 .id = 0x00041022,
1823 .mask = 0x000fffff,
1824 .data = &vendor_arm,
1825 },
1826 {
1827 /*
1828 * ST Micro derivative, this has 32bit wide
1829 * and 32 locations deep TX/RX FIFO
1830 */
1831 .id = 0x00108022,
1832 .mask = 0xffffffff,
1833 .data = &vendor_st,
1834 },
1835 { 0, 0 },
1836};
1837
1838static struct amba_driver pl022_driver = {
1839 .drv = {
1840 .name = "ssp-pl022",
1841 },
1842 .id_table = pl022_ids,
1843 .probe = pl022_probe,
1844 .remove = __exit_p(pl022_remove),
1845 .suspend = pl022_suspend,
1846 .resume = pl022_resume,
1847};
1848
1849
1850static int __init pl022_init(void)
1851{
1852 return amba_driver_register(&pl022_driver);
1853}
1854
1855module_init(pl022_init);
1856
1857static void __exit pl022_exit(void)
1858{
1859 amba_driver_unregister(&pl022_driver);
1860}
1861
1862module_exit(pl022_exit);
1863
1864MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>");
1865MODULE_DESCRIPTION("PL022 SSP Controller Driver");
1866MODULE_LICENSE("GPL");
diff --git a/drivers/spi/spi_s3c24xx_gpio.c b/drivers/spi/spi_s3c24xx_gpio.c
index f2447a5476bb..bbf9371cd284 100644
--- a/drivers/spi/spi_s3c24xx_gpio.c
+++ b/drivers/spi/spi_s3c24xx_gpio.c
@@ -17,6 +17,7 @@
17#include <linux/spinlock.h> 17#include <linux/spinlock.h>
18#include <linux/workqueue.h> 18#include <linux/workqueue.h>
19#include <linux/platform_device.h> 19#include <linux/platform_device.h>
20#include <linux/gpio.h>
20 21
21#include <linux/spi/spi.h> 22#include <linux/spi/spi.h>
22#include <linux/spi/spi_bitbang.h> 23#include <linux/spi/spi_bitbang.h>
generated by cgit v1.2.2 (git 2.25.0) at 2024-09-30 11:30:13 -0400