spi: reorganize drivers

Sort the SPI makefile and enforce the naming convention spi_*.c for
spi drivers.

This change also rolls the contents of atmel_spi.h into the .c file
since there is only one user of that particular include file.

v2: - Use 'spi-' prefix instead of 'spi_' to match what seems to be
      be the predominant pattern for subsystem prefixes.
    - Clean up filenames in Kconfig and header comment blocks

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

1 files changed, 429 insertions, 0 deletions

diff --git a/drivers/spi/spi-gpio.c b/drivers/spi/spi-gpio.c
new file mode 100644
index 000000000000..0e88ab745490
--- /dev/null
+++ b/drivers/spi/spi-gpio.c
@@ -0,0 +1,429 @@
+/*
+ * SPI master driver using generic bitbanged GPIO
+ *
+ * Copyright (C) 2006,2008 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_bitbang.h>
+#include <linux/spi/spi_gpio.h>
+
+
+/*
+ * This bitbanging SPI master driver should help make systems usable
+ * when a native hardware SPI engine is not available, perhaps because
+ * its driver isn't yet working or because the I/O pins it requires
+ * are used for other purposes.
+ *
+ * platform_device->driver_data ... points to spi_gpio
+ *
+ * spi->controller_state ... reserved for bitbang framework code
+ * spi->controller_data ... holds chipselect GPIO
+ *
+ * spi->master->dev.driver_data ... points to spi_gpio->bitbang
+ */
+
+struct spi_gpio {
+        struct spi_bitbang              bitbang;
+        struct spi_gpio_platform_data   pdata;
+        struct platform_device          *pdev;
+};
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * Because the overhead of going through four GPIO procedure calls
+ * per transferred bit can make performance a problem, this code
+ * is set up so that you can use it in either of two ways:
+ *
+ *   - The slow generic way:  set up platform_data to hold the GPIO
+ *     numbers used for MISO/MOSI/SCK, and issue procedure calls for
+ *     each of them.  This driver can handle several such busses.
+ *
+ *   - The quicker inlined way:  only helps with platform GPIO code
+ *     that inlines operations for constant GPIOs.  This can give
+ *     you tight (fast!) inner loops, but each such bus needs a
+ *     new driver.  You'll define a new C file, with Makefile and
+ *     Kconfig support; the C code can be a total of six lines:
+ *
+ *              #define DRIVER_NAME     "myboard_spi2"
+ *              #define SPI_MISO_GPIO   119
+ *              #define SPI_MOSI_GPIO   120
+ *              #define SPI_SCK_GPIO    121
+ *              #define SPI_N_CHIPSEL   4
+ *              #include "spi-gpio.c"
+ */
+
+#ifndef DRIVER_NAME
+#define DRIVER_NAME     "spi_gpio"
+
+#define GENERIC_BITBANG /* vs tight inlines */
+
+/* all functions referencing these symbols must define pdata */
+#define SPI_MISO_GPIO   ((pdata)->miso)
+#define SPI_MOSI_GPIO   ((pdata)->mosi)
+#define SPI_SCK_GPIO    ((pdata)->sck)
+
+#define SPI_N_CHIPSEL   ((pdata)->num_chipselect)
+
+#endif
+
+/*----------------------------------------------------------------------*/
+
+static inline const struct spi_gpio_platform_data * __pure
+spi_to_pdata(const struct spi_device *spi)
+{
+        const struct spi_bitbang        *bang;
+        const struct spi_gpio           *spi_gpio;
+
+        bang = spi_master_get_devdata(spi->master);
+        spi_gpio = container_of(bang, struct spi_gpio, bitbang);
+        return &spi_gpio->pdata;
+}
+
+/* this is #defined to avoid unused-variable warnings when inlining */
+#define pdata           spi_to_pdata(spi)
+
+static inline void setsck(const struct spi_device *spi, int is_on)
+{
+        gpio_set_value(SPI_SCK_GPIO, is_on);
+}
+
+static inline void setmosi(const struct spi_device *spi, int is_on)
+{
+        gpio_set_value(SPI_MOSI_GPIO, is_on);
+}
+
+static inline int getmiso(const struct spi_device *spi)
+{
+        return !!gpio_get_value(SPI_MISO_GPIO);
+}
+
+#undef pdata
+
+/*
+ * NOTE:  this clocks "as fast as we can".  It "should" be a function of the
+ * requested device clock.  Software overhead means we usually have trouble
+ * reaching even one Mbit/sec (except when we can inline bitops), so for now
+ * we'll just assume we never need additional per-bit slowdowns.
+ */
+#define spidelay(nsecs) do {} while (0)
+
+#include "spi-bitbang-txrx.h"
+
+/*
+ * These functions can leverage inline expansion of GPIO calls to shrink
+ * costs for a txrx bit, often by factors of around ten (by instruction
+ * count).  That is particularly visible for larger word sizes, but helps
+ * even with default 8-bit words.
+ *
+ * REVISIT overheads calling these functions for each word also have
+ * significant performance costs.  Having txrx_bufs() calls that inline
+ * the txrx_word() logic would help performance, e.g. on larger blocks
+ * used with flash storage or MMC/SD.  There should also be ways to make
+ * GCC be less stupid about reloading registers inside the I/O loops,
+ * even without inlined GPIO calls; __attribute__((hot)) on GCC 4.3?
+ */
+
+static u32 spi_gpio_txrx_word_mode0(struct spi_device *spi,
+                unsigned nsecs, u32 word, u8 bits)
+{
+        return bitbang_txrx_be_cpha0(spi, nsecs, 0, 0, word, bits);
+}
+
+static u32 spi_gpio_txrx_word_mode1(struct spi_device *spi,
+                unsigned nsecs, u32 word, u8 bits)
+{
+        return bitbang_txrx_be_cpha1(spi, nsecs, 0, 0, word, bits);
+}
+
+static u32 spi_gpio_txrx_word_mode2(struct spi_device *spi,
+                unsigned nsecs, u32 word, u8 bits)
+{
+        return bitbang_txrx_be_cpha0(spi, nsecs, 1, 0, word, bits);
+}
+
+static u32 spi_gpio_txrx_word_mode3(struct spi_device *spi,
+                unsigned nsecs, u32 word, u8 bits)
+{
+        return bitbang_txrx_be_cpha1(spi, nsecs, 1, 0, word, bits);
+}
+
+/*
+ * These functions do not call setmosi or getmiso if respective flag
+ * (SPI_MASTER_NO_RX or SPI_MASTER_NO_TX) is set, so they are safe to
+ * call when such pin is not present or defined in the controller.
+ * A separate set of callbacks is defined to get highest possible
+ * speed in the generic case (when both MISO and MOSI lines are
+ * available), as optimiser will remove the checks when argument is
+ * constant.
+ */
+
+static u32 spi_gpio_spec_txrx_word_mode0(struct spi_device *spi,
+                unsigned nsecs, u32 word, u8 bits)
+{
+        unsigned flags = spi->master->flags;
+        return bitbang_txrx_be_cpha0(spi, nsecs, 0, flags, word, bits);
+}
+
+static u32 spi_gpio_spec_txrx_word_mode1(struct spi_device *spi,
+                unsigned nsecs, u32 word, u8 bits)
+{
+        unsigned flags = spi->master->flags;
+        return bitbang_txrx_be_cpha1(spi, nsecs, 0, flags, word, bits);
+}
+
+static u32 spi_gpio_spec_txrx_word_mode2(struct spi_device *spi,
+                unsigned nsecs, u32 word, u8 bits)
+{
+        unsigned flags = spi->master->flags;
+        return bitbang_txrx_be_cpha0(spi, nsecs, 1, flags, word, bits);
+}
+
+static u32 spi_gpio_spec_txrx_word_mode3(struct spi_device *spi,
+                unsigned nsecs, u32 word, u8 bits)
+{
+        unsigned flags = spi->master->flags;
+        return bitbang_txrx_be_cpha1(spi, nsecs, 1, flags, word, bits);
+}
+
+/*----------------------------------------------------------------------*/
+
+static void spi_gpio_chipselect(struct spi_device *spi, int is_active)
+{
+        unsigned long cs = (unsigned long) spi->controller_data;
+
+        /* set initial clock polarity */
+        if (is_active)
+                setsck(spi, spi->mode & SPI_CPOL);
+
+        if (cs != SPI_GPIO_NO_CHIPSELECT) {
+                /* SPI is normally active-low */
+                gpio_set_value(cs, (spi->mode & SPI_CS_HIGH) ? is_active : !is_active);
+        }
+}
+
+static int spi_gpio_setup(struct spi_device *spi)
+{
+        unsigned long   cs = (unsigned long) spi->controller_data;
+        int             status = 0;
+
+        if (spi->bits_per_word > 32)
+                return -EINVAL;
+
+        if (!spi->controller_state) {
+                if (cs != SPI_GPIO_NO_CHIPSELECT) {
+                        status = gpio_request(cs, dev_name(&spi->dev));
+                        if (status)
+                                return status;
+                        status = gpio_direction_output(cs, spi->mode & SPI_CS_HIGH);
+                }
+        }
+        if (!status)
+                status = spi_bitbang_setup(spi);
+        if (status) {
+                if (!spi->controller_state && cs != SPI_GPIO_NO_CHIPSELECT)
+                        gpio_free(cs);
+        }
+        return status;
+}
+
+static void spi_gpio_cleanup(struct spi_device *spi)
+{
+        unsigned long   cs = (unsigned long) spi->controller_data;
+
+        if (cs != SPI_GPIO_NO_CHIPSELECT)
+                gpio_free(cs);
+        spi_bitbang_cleanup(spi);
+}
+
+static int __init spi_gpio_alloc(unsigned pin, const char *label, bool is_in)
+{
+        int value;
+
+        value = gpio_request(pin, label);
+        if (value == 0) {
+                if (is_in)
+                        value = gpio_direction_input(pin);
+                else
+                        value = gpio_direction_output(pin, 0);
+        }
+        return value;
+}
+
+static int __init
+spi_gpio_request(struct spi_gpio_platform_data *pdata, const char *label,
+        u16 *res_flags)
+{
+        int value;
+
+        /* NOTE:  SPI_*_GPIO symbols may reference "pdata" */
+
+        if (SPI_MOSI_GPIO != SPI_GPIO_NO_MOSI) {
+                value = spi_gpio_alloc(SPI_MOSI_GPIO, label, false);
+                if (value)
+                        goto done;
+        } else {
+                /* HW configuration without MOSI pin */
+                *res_flags |= SPI_MASTER_NO_TX;
+        }
+
+        if (SPI_MISO_GPIO != SPI_GPIO_NO_MISO) {
+                value = spi_gpio_alloc(SPI_MISO_GPIO, label, true);
+                if (value)
+                        goto free_mosi;
+        } else {
+                /* HW configuration without MISO pin */
+                *res_flags |= SPI_MASTER_NO_RX;
+        }
+
+        value = spi_gpio_alloc(SPI_SCK_GPIO, label, false);
+        if (value)
+                goto free_miso;
+
+        goto done;
+
+free_miso:
+        if (SPI_MISO_GPIO != SPI_GPIO_NO_MISO)
+                gpio_free(SPI_MISO_GPIO);
+free_mosi:
+        if (SPI_MOSI_GPIO != SPI_GPIO_NO_MOSI)
+                gpio_free(SPI_MOSI_GPIO);
+done:
+        return value;
+}
+
+static int __init spi_gpio_probe(struct platform_device *pdev)
+{
+        int                             status;
+        struct spi_master               *master;
+        struct spi_gpio                 *spi_gpio;
+        struct spi_gpio_platform_data   *pdata;
+        u16 master_flags = 0;
+
+        pdata = pdev->dev.platform_data;
+#ifdef GENERIC_BITBANG
+        if (!pdata || !pdata->num_chipselect)
+                return -ENODEV;
+#endif
+
+        status = spi_gpio_request(pdata, dev_name(&pdev->dev), &master_flags);
+        if (status < 0)
+                return status;
+
+        master = spi_alloc_master(&pdev->dev, sizeof *spi_gpio);
+        if (!master) {
+                status = -ENOMEM;
+                goto gpio_free;
+        }
+        spi_gpio = spi_master_get_devdata(master);
+        platform_set_drvdata(pdev, spi_gpio);
+
+        spi_gpio->pdev = pdev;
+        if (pdata)
+                spi_gpio->pdata = *pdata;
+
+        master->flags = master_flags;
+        master->bus_num = pdev->id;
+        master->num_chipselect = SPI_N_CHIPSEL;
+        master->setup = spi_gpio_setup;
+        master->cleanup = spi_gpio_cleanup;
+
+        spi_gpio->bitbang.master = spi_master_get(master);
+        spi_gpio->bitbang.chipselect = spi_gpio_chipselect;
+
+        if ((master_flags & (SPI_MASTER_NO_TX | SPI_MASTER_NO_RX)) == 0) {
+                spi_gpio->bitbang.txrx_word[SPI_MODE_0] = spi_gpio_txrx_word_mode0;
+                spi_gpio->bitbang.txrx_word[SPI_MODE_1] = spi_gpio_txrx_word_mode1;
+                spi_gpio->bitbang.txrx_word[SPI_MODE_2] = spi_gpio_txrx_word_mode2;
+                spi_gpio->bitbang.txrx_word[SPI_MODE_3] = spi_gpio_txrx_word_mode3;
+        } else {
+                spi_gpio->bitbang.txrx_word[SPI_MODE_0] = spi_gpio_spec_txrx_word_mode0;
+                spi_gpio->bitbang.txrx_word[SPI_MODE_1] = spi_gpio_spec_txrx_word_mode1;
+                spi_gpio->bitbang.txrx_word[SPI_MODE_2] = spi_gpio_spec_txrx_word_mode2;
+                spi_gpio->bitbang.txrx_word[SPI_MODE_3] = spi_gpio_spec_txrx_word_mode3;
+        }
+        spi_gpio->bitbang.setup_transfer = spi_bitbang_setup_transfer;
+        spi_gpio->bitbang.flags = SPI_CS_HIGH;
+
+        status = spi_bitbang_start(&spi_gpio->bitbang);
+        if (status < 0) {
+                spi_master_put(spi_gpio->bitbang.master);
+gpio_free:
+                if (SPI_MISO_GPIO != SPI_GPIO_NO_MISO)
+                        gpio_free(SPI_MISO_GPIO);
+                if (SPI_MOSI_GPIO != SPI_GPIO_NO_MOSI)
+                        gpio_free(SPI_MOSI_GPIO);
+                gpio_free(SPI_SCK_GPIO);
+                spi_master_put(master);
+        }
+
+        return status;
+}
+
+static int __exit spi_gpio_remove(struct platform_device *pdev)
+{
+        struct spi_gpio                 *spi_gpio;
+        struct spi_gpio_platform_data   *pdata;
+        int                             status;
+
+        spi_gpio = platform_get_drvdata(pdev);
+        pdata = pdev->dev.platform_data;
+
+        /* stop() unregisters child devices too */
+        status = spi_bitbang_stop(&spi_gpio->bitbang);
+        spi_master_put(spi_gpio->bitbang.master);
+
+        platform_set_drvdata(pdev, NULL);
+
+        if (SPI_MISO_GPIO != SPI_GPIO_NO_MISO)
+                gpio_free(SPI_MISO_GPIO);
+        if (SPI_MOSI_GPIO != SPI_GPIO_NO_MOSI)
+                gpio_free(SPI_MOSI_GPIO);
+        gpio_free(SPI_SCK_GPIO);
+
+        return status;
+}
+
+MODULE_ALIAS("platform:" DRIVER_NAME);
+
+static struct platform_driver spi_gpio_driver = {
+        .driver.name    = DRIVER_NAME,
+        .driver.owner   = THIS_MODULE,
+        .remove         = __exit_p(spi_gpio_remove),
+};
+
+static int __init spi_gpio_init(void)
+{
+        return platform_driver_probe(&spi_gpio_driver, spi_gpio_probe);
+}
+module_init(spi_gpio_init);
+
+static void __exit spi_gpio_exit(void)
+{
+        platform_driver_unregister(&spi_gpio_driver);
+}
+module_exit(spi_gpio_exit);
+
+
+MODULE_DESCRIPTION("SPI master driver using generic bitbanged GPIO ");
+MODULE_AUTHOR("David Brownell");
+MODULE_LICENSE("GPL");