Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (51 commits)
  [ARM] 5308/1: Fix Viper ISA IRQ handling
  [ARM] 5307/1: pxa: fix CM-X2XX PCMCIA build error
  [ARM] 5306/1: pxa: fix build error on CM-X270
  [ARM] 5302/1: ARM: OMAP: Revert omap3 WDT changes to avoid merge conflict
  [ARM] 5305/1: ARM: OMAP: Fix compile of McBSP by removing unnecessary check
  [ARM] 5301/1: ARM: OMAP: Add missing irq defines
  ARM: OMAP3: Add default kernel config for OMAP LDP
  ARM: OMAP3: Add basic board support for OMAP LDP
  ARM: OMAP3: Defconfig for the Gumstix Overo board (rev 3)
  ARM: OMAP3: Add support for the Gumstix Overo board (rev 3)
  ARM: OMAP3: Add Beagle defconfig
  ARM: OMAP3: Add minimal Beagle board support
  ARM: OMAP3: Add minimal omap3430 support
  ARM: OMAP2: Fix sparse, checkpatch warnings in OMAP2/3 IRQ code
  ARM: OMAP: Fixes to omap_mcbsp_request function
  ARM: OMAP: Add support for OMAP2430 in McBSP
  ARM: OMAP: Add support for McBSP devices 3 - 5 on 34xx
  ARM: OMAP: Allocate McBSP devices dynamically
  Fix sections for omap-mcbsp platform driver
  [ARM] S3C24XX: Additional include moves
  ...

1 files changed, 19 insertions, 4 deletions

diff --git a/drivers/spi/omap_uwire.c b/drivers/spi/omap_uwire.c
index 5515eb97d7c5..bab6ff061e91 100644
--- a/drivers/spi/omap_uwire.c
+++ b/drivers/spi/omap_uwire.c
@@ -59,7 +59,6 @@
  * and irqs should show there too...
  */
 #define UWIRE_BASE_PHYS         0xFFFB3000
-#define UWIRE_BASE              ((void *__iomem)IO_ADDRESS(UWIRE_BASE_PHYS))
 
 /* uWire Registers: */
 #define UWIRE_IO_SIZE 0x20
@@ -103,16 +102,21 @@ struct uwire_state {
 };
 
 /* REVISIT compile time constant for idx_shift? */
+/*
+ * Or, put it in a structure which is used throughout the driver;
+ * that avoids having to issue two loads for each bit of static data.
+ */
 static unsigned int uwire_idx_shift;
+static void __iomem *uwire_base;
 
 static inline void uwire_write_reg(int idx, u16 val)
 {
-        __raw_writew(val, UWIRE_BASE + (idx << uwire_idx_shift));
+        __raw_writew(val, uwire_base + (idx << uwire_idx_shift));
 }
 
 static inline u16 uwire_read_reg(int idx)
 {
-        return __raw_readw(UWIRE_BASE + (idx << uwire_idx_shift));
+        return __raw_readw(uwire_base + (idx << uwire_idx_shift));
 }
 
 static inline void omap_uwire_configure_mode(u8 cs, unsigned long flags)
@@ -492,6 +496,14 @@ static int __init uwire_probe(struct platform_device *pdev)
                 return -ENODEV;
 
         uwire = spi_master_get_devdata(master);
+
+        uwire_base = ioremap(UWIRE_BASE_PHYS, UWIRE_IO_SIZE);
+        if (!uwire_base) {
+                dev_dbg(&pdev->dev, "can't ioremap UWIRE\n");
+                spi_master_put(master);
+                return -ENOMEM;
+        }
+
         dev_set_drvdata(&pdev->dev, uwire);
 
         uwire->ck = clk_get(&pdev->dev, "armxor_ck");
@@ -520,8 +532,10 @@ static int __init uwire_probe(struct platform_device *pdev)
         uwire->bitbang.txrx_bufs = uwire_txrx;
 
         status = spi_bitbang_start(&uwire->bitbang);
-        if (status < 0)
+        if (status < 0) {
                 uwire_off(uwire);
+                iounmap(uwire_base);
+        }
         return status;
 }
 
@@ -534,6 +548,7 @@ static int __exit uwire_remove(struct platform_device *pdev)
 
         status = spi_bitbang_stop(&uwire->bitbang);
         uwire_off(uwire);
+        iounmap(uwire_base);
         return status;
 }