spi: davinci: consolidate setup of SPIFMTn in one function

Consolidate the setup of SPIFMTn register under
davinci_spi_setup_transfer() simplifying the code
and avoiding unnecessary reads and writes to the
register.

The two inline functions {set|clear}_fmt_bits() can
be eliminated because of this.

Signed-off-by: Brian Niebuhr <bniebuhr@efjohnson.com>
Tested-By: Michael Williamson <michael.williamson@criticallink.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

1 files changed, 49 insertions, 105 deletions

diff --git a/drivers/spi/davinci_spi.c b/drivers/spi/davinci_spi.c
index d4320f784070..34b28fe2d327 100644
--- a/drivers/spi/davinci_spi.c
+++ b/drivers/spi/davinci_spi.c
@@ -52,7 +52,6 @@
 #define SPIFMT_ODD_PARITY_MASK  BIT(23)
 #define SPIFMT_WDELAY_MASK      0x3f000000u
 #define SPIFMT_WDELAY_SHIFT     24
-#define SPIFMT_CHARLEN_MASK     0x0000001Fu
 #define SPIFMT_PRESCALE_SHIFT   8
 
 
@@ -212,16 +211,6 @@ static inline void clear_io_bits(void __iomem *addr, u32 bits)
         iowrite32(v, addr);
 }
 
-static inline void set_fmt_bits(void __iomem *addr, u32 bits, int cs_num)
-{
-        set_io_bits(addr + SPIFMT0 + (0x4 * cs_num), bits);
-}
-
-static inline void clear_fmt_bits(void __iomem *addr, u32 bits, int cs_num)
-{
-        clear_io_bits(addr + SPIFMT0 + (0x4 * cs_num), bits);
-}
-
 static void davinci_spi_set_dma_req(const struct spi_device *spi, int enable)
 {
         struct davinci_spi *davinci_spi = spi_master_get_devdata(spi->master);
@@ -306,10 +295,14 @@ static int davinci_spi_setup_transfer(struct spi_device *spi,
 {
 
         struct davinci_spi *davinci_spi;
+        struct davinci_spi_config *spicfg;
         u8 bits_per_word = 0;
-        u32 hz = 0, prescale = 0;
+        u32 hz = 0, spifmt = 0, prescale = 0;
 
         davinci_spi = spi_master_get_devdata(spi->master);
+        spicfg = (struct davinci_spi_config *)spi->controller_data;
+        if (!spicfg)
+                spicfg = &davinci_spi_default_cfg;
 
         if (t) {
                 bits_per_word = t->bits_per_word;
@@ -338,18 +331,55 @@ static int davinci_spi_setup_transfer(struct spi_device *spi,
         if (!hz)
                 hz = spi->max_speed_hz;
 
+        /* Set up SPIFMTn register, unique to this chipselect. */
+
         prescale = davinci_spi_get_prescale(davinci_spi, hz);
         if (prescale < 0)
                 return prescale;
 
-        clear_fmt_bits(davinci_spi->base, SPIFMT_CHARLEN_MASK,
-                        spi->chip_select);
-        set_fmt_bits(davinci_spi->base, bits_per_word & 0x1f,
-                        spi->chip_select);
+        spifmt = (prescale << SPIFMT_PRESCALE_SHIFT) | (bits_per_word & 0x1f);
+
+        if (spi->mode & SPI_LSB_FIRST)
+                spifmt |= SPIFMT_SHIFTDIR_MASK;
+
+        if (spi->mode & SPI_CPOL)
+                spifmt |= SPIFMT_POLARITY_MASK;
+
+        if (!(spi->mode & SPI_CPHA))
+                spifmt |= SPIFMT_PHASE_MASK;
+
+        /*
+         * Version 1 hardware supports two basic SPI modes:
+         *  - Standard SPI mode uses 4 pins, with chipselect
+         *  - 3 pin SPI is a 4 pin variant without CS (SPI_NO_CS)
+         *      (distinct from SPI_3WIRE, with just one data wire;
+         *      or similar variants without MOSI or without MISO)
+         *
+         * Version 2 hardware supports an optional handshaking signal,
+         * so it can support two more modes:
+         *  - 5 pin SPI variant is standard SPI plus SPI_READY
+         *  - 4 pin with enable is (SPI_READY | SPI_NO_CS)
+         */
+
+        if (davinci_spi->version == SPI_VERSION_2) {
+
+                spifmt |= ((spicfg->wdelay << SPIFMT_WDELAY_SHIFT)
+                                                        & SPIFMT_WDELAY_MASK);
 
-        clear_fmt_bits(davinci_spi->base, 0x0000ff00, spi->chip_select);
-        set_fmt_bits(davinci_spi->base,
-                        prescale << SPIFMT_PRESCALE_SHIFT, spi->chip_select);
+                if (spicfg->odd_parity)
+                        spifmt |= SPIFMT_ODD_PARITY_MASK;
+
+                if (spicfg->parity_enable)
+                        spifmt |= SPIFMT_PARITYENA_MASK;
+
+                if (spicfg->timer_disable)
+                        spifmt |= SPIFMT_DISTIMER_MASK;
+
+                if (spi->mode & SPI_READY)
+                        spifmt |= SPIFMT_WAITENA_MASK;
+        }
+
+        iowrite32(spifmt, davinci_spi->base + SPIFMT0);
 
         return 0;
 }
@@ -436,12 +466,8 @@ static int davinci_spi_setup(struct spi_device *spi)
         int retval;
         struct davinci_spi *davinci_spi;
         struct davinci_spi_dma *davinci_spi_dma;
-        struct davinci_spi_config *spicfg;
 
         davinci_spi = spi_master_get_devdata(spi->master);
-        spicfg = (struct davinci_spi_config *)spi->controller_data;
-        if (!spicfg)
-                spicfg = &davinci_spi_default_cfg;
 
         /* if bits per word length is zero then set it default 8 */
         if (!spi->bits_per_word)
@@ -460,88 +486,6 @@ static int davinci_spi_setup(struct spi_device *spi)
                 }
         }
 
-        /*
-         * Set up SPIFMTn register, unique to this chipselect.
-         *
-         * NOTE: we could do all of these with one write.  Also, some
-         * of the "version 2" features are found in chips that don't
-         * support all of them...
-         */
-        if (spi->mode & SPI_LSB_FIRST)
-                set_fmt_bits(davinci_spi->base, SPIFMT_SHIFTDIR_MASK,
-                                spi->chip_select);
-        else
-                clear_fmt_bits(davinci_spi->base, SPIFMT_SHIFTDIR_MASK,
-                                spi->chip_select);
-
-        if (spi->mode & SPI_CPOL)
-                set_fmt_bits(davinci_spi->base, SPIFMT_POLARITY_MASK,
-                                spi->chip_select);
-        else
-                clear_fmt_bits(davinci_spi->base, SPIFMT_POLARITY_MASK,
-                                spi->chip_select);
-
-        if (!(spi->mode & SPI_CPHA))
-                set_fmt_bits(davinci_spi->base, SPIFMT_PHASE_MASK,
-                                spi->chip_select);
-        else
-                clear_fmt_bits(davinci_spi->base, SPIFMT_PHASE_MASK,
-                                spi->chip_select);
-
-        /*
-         * Version 1 hardware supports two basic SPI modes:
-         *  - Standard SPI mode uses 4 pins, with chipselect
-         *  - 3 pin SPI is a 4 pin variant without CS (SPI_NO_CS)
-         *      (distinct from SPI_3WIRE, with just one data wire;
-         *      or similar variants without MOSI or without MISO)
-         *
-         * Version 2 hardware supports an optional handshaking signal,
-         * so it can support two more modes:
-         *  - 5 pin SPI variant is standard SPI plus SPI_READY
-         *  - 4 pin with enable is (SPI_READY | SPI_NO_CS)
-         */
-
-        if (davinci_spi->version == SPI_VERSION_2) {
-
-                clear_fmt_bits(davinci_spi->base, SPIFMT_WDELAY_MASK,
-                                                        spi->chip_select);
-                set_fmt_bits(davinci_spi->base,
-                                (spicfg->wdelay << SPIFMT_WDELAY_SHIFT) &
-                                SPIFMT_WDELAY_MASK, spi->chip_select);
-
-                if (spicfg->odd_parity)
-                        set_fmt_bits(davinci_spi->base, SPIFMT_ODD_PARITY_MASK,
-                                                        spi->chip_select);
-                else
-                        clear_fmt_bits(davinci_spi->base,
-                                        SPIFMT_ODD_PARITY_MASK,
-                                        spi->chip_select);
-
-                if (spicfg->parity_enable)
-                        set_fmt_bits(davinci_spi->base, SPIFMT_PARITYENA_MASK,
-                                                        spi->chip_select);
-                else
-                        clear_fmt_bits(davinci_spi->base, SPIFMT_PARITYENA_MASK,
-                                                        spi->chip_select);
-
-                if (spicfg->timer_disable)
-                        set_fmt_bits(davinci_spi->base, SPIFMT_DISTIMER_MASK,
-                                                        spi->chip_select);
-                else
-                        clear_fmt_bits(davinci_spi->base, SPIFMT_DISTIMER_MASK,
-                                                        spi->chip_select);
-
-                if (spi->mode & SPI_READY)
-                        set_fmt_bits(davinci_spi->base,
-                                        SPIFMT_WAITENA_MASK,
-                                        spi->chip_select);
-                else
-                        clear_fmt_bits(davinci_spi->base,
-                                        SPIFMT_WAITENA_MASK,
-                                        spi->chip_select);
-
-        }
-
         retval = davinci_spi_setup_transfer(spi, NULL);
 
         return retval;