Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (95 commits)
  [ARM] 4578/1: CM-x270: PCMCIA support
  [ARM] 4577/1: ITE 8152 PCI bridge support
  [ARM] 4576/1: CM-X270 machine support
  [ARM] pxa: Avoid pxa_gpio_mode() in gpio_direction_{in,out}put()
  [ARM] pxa: move pxa_set_mode() from pxa2xx_mainstone.c to mainstone.c
  [ARM] pxa: move pxa_set_mode() from pxa2xx_lubbock.c to lubbock.c
  [ARM] pxa: Make cpu_is_pxaXXX dependent on configuration symbols
  [ARM] pxa: PXA3xx base support
  [NET] smc91x: fix PXA DMA support code
  [SERIAL] Fix console initialisation ordering
  [ARM] pxa: tidy up arch/arm/mach-pxa/Makefile
  [ARM] Update arch/arm/Kconfig for drivers/Kconfig changes
  [ARM] 4600/1: fix kernel build failure with build-id-supporting binutils
  [ARM] 4599/1: Preserve ATAG list for use with kexec (2.6.23)
  [ARM] Rename consistent_sync() as dma_cache_maint()
  [ARM] 4572/1: ep93xx: add cirrus logic edb9307 support
  [ARM] 4596/1: S3C2412: Correct IRQs for SDI+CF and add decoding support
  [ARM] 4595/1: ns9xxx: define registers as void __iomem * instead of volatile u32
  [ARM] 4594/1: ns9xxx: use the new gpio functions
  [ARM] 4593/1: ns9xxx: implement generic clockevents
  ...

2 files changed, 91 insertions, 90 deletions

diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c
index e9c6cb391a23..af3a011b2b24 100644
--- a/drivers/serial/pxa.c
+++ b/drivers/serial/pxa.c
@@ -42,6 +42,7 @@
 #include <linux/tty.h>
 #include <linux/tty_flip.h>
 #include <linux/serial_core.h>
+#include <linux/clk.h>
 
 #include <asm/io.h>
 #include <asm/hardware.h>
@@ -55,7 +56,7 @@ struct uart_pxa_port {
         unsigned char           lcr;
         unsigned char           mcr;
         unsigned int            lsr_break_flag;
-        unsigned int            cken;
+        struct clk              *clk;
         char                    *name;
 };
 
@@ -351,6 +352,8 @@ static int serial_pxa_startup(struct uart_port *port)
         else
                 up->mcr = 0;
 
+        up->port.uartclk = clk_get_rate(up->clk);
+
         /*
          * Allocate the IRQ
          */
@@ -546,9 +549,11 @@ serial_pxa_pm(struct uart_port *port, unsigned int state,
               unsigned int oldstate)
 {
         struct uart_pxa_port *up = (struct uart_pxa_port *)port;
-        pxa_set_cken(up->cken, !state);
+
         if (!state)
-                udelay(1);
+                clk_enable(up->clk);
+        else
+                clk_disable(up->clk);
 }
 
 static void serial_pxa_release_port(struct uart_port *port)
@@ -582,7 +587,7 @@ serial_pxa_type(struct uart_port *port)
 
 #ifdef CONFIG_SERIAL_PXA_CONSOLE
 
-static struct uart_pxa_port serial_pxa_ports[];
+static struct uart_pxa_port *serial_pxa_ports[4];
 static struct uart_driver serial_pxa_reg;
 
 #define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
@@ -632,9 +637,11 @@ static void serial_pxa_console_putchar(struct uart_port *port, int ch)
 static void
 serial_pxa_console_write(struct console *co, const char *s, unsigned int count)
 {
-        struct uart_pxa_port *up = &serial_pxa_ports[co->index];
+        struct uart_pxa_port *up = serial_pxa_ports[co->index];
         unsigned int ier;
 
+        clk_enable(up->clk);
+
         /*
          *      First save the IER then disable the interrupts
          */
@@ -649,6 +656,8 @@ serial_pxa_console_write(struct console *co, const char *s, unsigned int count)
          */
         wait_for_xmitr(up);
         serial_out(up, UART_IER, ier);
+
+        clk_disable(up->clk);
 }
 
 static int __init
@@ -662,7 +671,9 @@ serial_pxa_console_setup(struct console *co, char *options)
 
         if (co->index == -1 || co->index >= serial_pxa_reg.nr)
                 co->index = 0;
-        up = &serial_pxa_ports[co->index];
+        up = serial_pxa_ports[co->index];
+        if (!up)
+                return -ENODEV;
 
         if (options)
                 uart_parse_options(options, &baud, &parity, &bits, &flow);
@@ -680,15 +691,6 @@ static struct console serial_pxa_console = {
         .data           = &serial_pxa_reg,
 };
 
-static int __init
-serial_pxa_console_init(void)
-{
-        register_console(&serial_pxa_console);
-        return 0;
-}
-
-console_initcall(serial_pxa_console_init);
-
 #define PXA_CONSOLE     &serial_pxa_console
 #else
 #define PXA_CONSOLE     NULL
@@ -714,73 +716,13 @@ struct uart_ops serial_pxa_pops = {
         .verify_port    = serial_pxa_verify_port,
 };
 
-static struct uart_pxa_port serial_pxa_ports[] = {
-     {  /* FFUART */
-        .name   = "FFUART",
-        .cken   = CKEN_FFUART,
-        .port   = {
-                .type           = PORT_PXA,
-                .iotype         = UPIO_MEM,
-                .membase        = (void *)&FFUART,
-                .mapbase        = __PREG(FFUART),
-                .irq            = IRQ_FFUART,
-                .uartclk        = 921600 * 16,
-                .fifosize       = 64,
-                .ops            = &serial_pxa_pops,
-                .line           = 0,
-        },
-  }, {  /* BTUART */
-        .name   = "BTUART",
-        .cken   = CKEN_BTUART,
-        .port   = {
-                .type           = PORT_PXA,
-                .iotype         = UPIO_MEM,
-                .membase        = (void *)&BTUART,
-                .mapbase        = __PREG(BTUART),
-                .irq            = IRQ_BTUART,
-                .uartclk        = 921600 * 16,
-                .fifosize       = 64,
-                .ops            = &serial_pxa_pops,
-                .line           = 1,
-        },
-  }, {  /* STUART */
-        .name   = "STUART",
-        .cken   = CKEN_STUART,
-        .port   = {
-                .type           = PORT_PXA,
-                .iotype         = UPIO_MEM,
-                .membase        = (void *)&STUART,
-                .mapbase        = __PREG(STUART),
-                .irq            = IRQ_STUART,
-                .uartclk        = 921600 * 16,
-                .fifosize       = 64,
-                .ops            = &serial_pxa_pops,
-                .line           = 2,
-        },
-  }, {  /* HWUART */
-        .name   = "HWUART",
-        .cken   = CKEN_HWUART,
-        .port = {
-                .type           = PORT_PXA,
-                .iotype         = UPIO_MEM,
-                .membase        = (void *)&HWUART,
-                .mapbase        = __PREG(HWUART),
-                .irq            = IRQ_HWUART,
-                .uartclk        = 921600 * 16,
-                .fifosize       = 64,
-                .ops            = &serial_pxa_pops,
-                .line           = 3,
-        },
-  }
-};
-
 static struct uart_driver serial_pxa_reg = {
         .owner          = THIS_MODULE,
         .driver_name    = "PXA serial",
         .dev_name       = "ttyS",
         .major          = TTY_MAJOR,
         .minor          = 64,
-        .nr             = ARRAY_SIZE(serial_pxa_ports),
+        .nr             = 4,
         .cons           = PXA_CONSOLE,
 };
 
@@ -806,10 +748,68 @@ static int serial_pxa_resume(struct platform_device *dev)
 
 static int serial_pxa_probe(struct platform_device *dev)
 {
-        serial_pxa_ports[dev->id].port.dev = &dev->dev;
-        uart_add_one_port(&serial_pxa_reg, &serial_pxa_ports[dev->id].port);
-        platform_set_drvdata(dev, &serial_pxa_ports[dev->id]);
+        struct uart_pxa_port *sport;
+        struct resource *mmres, *irqres;
+        int ret;
+
+        mmres = platform_get_resource(dev, IORESOURCE_MEM, 0);
+        irqres = platform_get_resource(dev, IORESOURCE_IRQ, 0);
+        if (!mmres || !irqres)
+                return -ENODEV;
+
+        sport = kzalloc(sizeof(struct uart_pxa_port), GFP_KERNEL);
+        if (!sport)
+                return -ENOMEM;
+
+        sport->clk = clk_get(&dev->dev, "UARTCLK");
+        if (IS_ERR(sport->clk)) {
+                ret = PTR_ERR(sport->clk);
+                goto err_free;
+        }
+
+        sport->port.type = PORT_PXA;
+        sport->port.iotype = UPIO_MEM;
+        sport->port.mapbase = mmres->start;
+        sport->port.irq = irqres->start;
+        sport->port.fifosize = 64;
+        sport->port.ops = &serial_pxa_pops;
+        sport->port.line = dev->id;
+        sport->port.dev = &dev->dev;
+        sport->port.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF;
+        sport->port.uartclk = clk_get_rate(sport->clk);
+
+        /*
+         * Is it worth keeping this?
+         */
+        if (mmres->start == __PREG(FFUART))
+                sport->name = "FFUART";
+        else if (mmres->start == __PREG(BTUART))
+                sport->name = "BTUART";
+        else if (mmres->start == __PREG(STUART))
+                sport->name = "STUART";
+        else if (mmres->start == __PREG(HWUART))
+                sport->name = "HWUART";
+        else
+                sport->name = "???";
+
+        sport->port.membase = ioremap(mmres->start, mmres->end - mmres->start + 1);
+        if (!sport->port.membase) {
+                ret = -ENOMEM;
+                goto err_clk;
+        }
+
+        serial_pxa_ports[dev->id] = sport;
+
+        uart_add_one_port(&serial_pxa_reg, &sport->port);
+        platform_set_drvdata(dev, sport);
+
         return 0;
+
+ err_clk:
+        clk_put(sport->clk);
+ err_free:
+        kfree(sport);
+        return ret;
 }
 
 static int serial_pxa_remove(struct platform_device *dev)
@@ -818,8 +818,9 @@ static int serial_pxa_remove(struct platform_device *dev)
 
         platform_set_drvdata(dev, NULL);
 
-        if (sport)
-                uart_remove_one_port(&serial_pxa_reg, &sport->port);
+        uart_remove_one_port(&serial_pxa_reg, &sport->port);
+        clk_put(sport->clk);
+        kfree(sport);
 
         return 0;
 }
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index a055f58f342f..a3bd3a3f41f3 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -2127,6 +2127,14 @@ uart_configure_port(struct uart_driver *drv, struct uart_state *state,
                 spin_unlock_irqrestore(&port->lock, flags);
 
                 /*
+                 * If this driver supports console, and it hasn't been
+                 * successfully registered yet, try to re-register it.
+                 * It may be that the port was not available.
+                 */
+                if (port->cons && !(port->cons->flags & CON_ENABLED))
+                        register_console(port->cons);
+
+                /*
                  * Power down all ports by default, except the
                  * console if we have one.
                  */
@@ -2286,6 +2294,7 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *port)
         }
 
         state->port = port;
+        state->pm_state = -1;
 
         port->cons = drv->cons;
         port->info = state->info;
@@ -2308,15 +2317,6 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *port)
         tty_register_device(drv->tty_driver, port->line, port->dev);
 
         /*
-         * If this driver supports console, and it hasn't been
-         * successfully registered yet, try to re-register it.
-         * It may be that the port was not available.
-         */
-        if (port->type != PORT_UNKNOWN &&
-            port->cons && !(port->cons->flags & CON_ENABLED))
-                register_console(port->cons);
-
-        /*
          * Ensure UPF_DEAD is not set.
          */
         port->flags &= ~UPF_DEAD;