Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (407 commits)
  [ARM] pxafb: add support for overlay1 and overlay2 as framebuffer devices
  [ARM] pxafb: cleanup of the timing checking code
  [ARM] pxafb: cleanup of the color format manipulation code
  [ARM] pxafb: add palette format support for LCCR4_PAL_FOR_3
  [ARM] pxafb: add support for FBIOPAN_DISPLAY by dma braching
  [ARM] pxafb: allow pxafb_set_par() to start from arbitrary yoffset
  [ARM] pxafb: allow video memory size to be configurable
  [ARM] pxa: add document on the MFP design and how to use it
  [ARM] sa1100_wdt: don't assume CLOCK_TICK_RATE to be a constant
  [ARM] rtc-sa1100: don't assume CLOCK_TICK_RATE to be a constant
  [ARM] pxa/tavorevb: update board support (smartpanel LCD + keypad)
  [ARM] pxa: Update eseries defconfig
  [ARM] 5352/1: add w90p910-plat config file
  [ARM] s3c: S3C options should depend on PLAT_S3C
  [ARM] mv78xx0: implement GPIO and GPIO interrupt support
  [ARM] Kirkwood: implement GPIO and GPIO interrupt support
  [ARM] Orion: share GPIO IRQ handling code
  [ARM] Orion: share GPIO handling code
  [ARM] s3c: define __io using the typesafe version
  [ARM] S3C64XX: Ensure CPU_V6 is selected
  ...

11 files changed, 461 insertions, 46 deletions

diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 579d63a81aa2..b695ab3142d8 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -447,7 +447,7 @@ config SERIAL_CLPS711X_CONSOLE
 
 config SERIAL_SAMSUNG
         tristate "Samsung SoC serial support"
-        depends on ARM && PLAT_S3C24XX
+        depends on ARM && PLAT_S3C
         select SERIAL_CORE
         help
           Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,
@@ -455,6 +455,16 @@ config SERIAL_SAMSUNG
           provide all of these ports, depending on how the serial port
           pins are configured.
 
+config SERIAL_SAMSUNG_UARTS
+        int
+        depends on SERIAL_SAMSUNG
+        default 2 if ARCH_S3C2400
+        default 4 if ARCH_S3C64XX || CPU_S3C2443
+        default 3
+        help
+          Select the number of available UART ports for the Samsung S3C
+          serial driver
+        
 config SERIAL_SAMSUNG_DEBUG
         bool "Samsung SoC serial debug"
         depends on SERIAL_SAMSUNG && DEBUG_LL
@@ -508,7 +518,20 @@ config SERIAL_S3C2440
         help
           Serial port support for the Samsung S3C2440 and S3C2442 SoC
 
+config SERIAL_S3C24A0
+        tristate "Samsung S3C24A0 Serial port support"
+        depends on SERIAL_SAMSUNG && CPU_S3C24A0
+        default y if CPU_S3C24A0
+        help
+          Serial port support for the Samsung S3C24A0 SoC
 
+config SERIAL_S3C6400
+        tristate "Samsung S3C6400/S3C6410 Serial port support"
+        depends on SERIAL_SAMSUNG && (CPU_S3C600 || CPU_S3C6410)
+        default y
+        help
+          Serial port support for the Samsung S3C6400 and S3C6410
+          SoCs
 
 config SERIAL_DZ
         bool "DECstation DZ serial driver"
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 0c17c8ddb19d..dfe775ac45b2 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -41,6 +41,8 @@ obj-$(CONFIG_SERIAL_S3C2400) += s3c2400.o
 obj-$(CONFIG_SERIAL_S3C2410) += s3c2410.o
 obj-$(CONFIG_SERIAL_S3C2412) += s3c2412.o
 obj-$(CONFIG_SERIAL_S3C2440) += s3c2440.o
+obj-$(CONFIG_SERIAL_S3C24A0) += s3c24a0.o
+obj-$(CONFIG_SERIAL_S3C6400) += s3c6400.o
 obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o
 obj-$(CONFIG_SERIAL_MUX) += mux.o
 obj-$(CONFIG_SERIAL_68328) += 68328serial.o
diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c
index 71562689116f..e3a5ad5ef1d6 100644
--- a/drivers/serial/amba-pl010.c
+++ b/drivers/serial/amba-pl010.c
@@ -692,7 +692,7 @@ static int pl010_probe(struct amba_device *dev, void *id)
                 goto free;
         }
 
-        uap->clk = clk_get(&dev->dev, "UARTCLK");
+        uap->clk = clk_get(&dev->dev, NULL);
         if (IS_ERR(uap->clk)) {
                 ret = PTR_ERR(uap->clk);
                 goto unmap;
diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c
index b7180046f8db..8b2b9700f3e4 100644
--- a/drivers/serial/amba-pl011.c
+++ b/drivers/serial/amba-pl011.c
@@ -756,7 +756,7 @@ static int pl011_probe(struct amba_device *dev, void *id)
                 goto free;
         }
 
-        uap->clk = clk_get(&dev->dev, "UARTCLK");
+        uap->clk = clk_get(&dev->dev, NULL);
         if (IS_ERR(uap->clk)) {
                 ret = PTR_ERR(uap->clk);
                 goto unmap;
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index 3f90f1bbbbcd..a50954612b60 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -66,7 +66,7 @@
 #define ONEMS 0xb0 /* One Millisecond register */
 #define UTS   0xb4 /* UART Test Register */
 #endif
-#ifdef CONFIG_ARCH_IMX
+#if defined(CONFIG_ARCH_IMX) || defined(CONFIG_ARCH_MX1)
 #define BIPR1 0xb0 /* Incremental Preset Register 1 */
 #define BIPR2 0xb4 /* Incremental Preset Register 2 */
 #define BIPR3 0xb8 /* Incremental Preset Register 3 */
@@ -96,7 +96,7 @@
 #define  UCR1_RTSDEN     (1<<5)  /* RTS delta interrupt enable */
 #define  UCR1_SNDBRK     (1<<4)  /* Send break */
 #define  UCR1_TDMAEN     (1<<3)  /* Transmitter ready DMA enable */
-#ifdef CONFIG_ARCH_IMX
+#if defined(CONFIG_ARCH_IMX) || defined(CONFIG_ARCH_MX1)
 #define  UCR1_UARTCLKEN  (1<<2)  /* UART clock enabled */
 #endif
 #if defined CONFIG_ARCH_MX3 || defined CONFIG_ARCH_MX2
@@ -187,11 +187,11 @@
 #define MAX_INTERNAL_IRQ        IMX_IRQS
 #endif
 
-#if defined CONFIG_ARCH_MX3 || defined CONFIG_ARCH_MX2
+#ifdef CONFIG_ARCH_MXC
 #define SERIAL_IMX_MAJOR        207
 #define MINOR_START             16
 #define DEV_NAME                "ttymxc"
-#define MAX_INTERNAL_IRQ        MXC_MAX_INT_LINES
+#define MAX_INTERNAL_IRQ        MXC_INTERNAL_IRQS
 #endif
 
 /*
diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c
index abc00be55433..f6e3b86bb0be 100644
--- a/drivers/serial/pxa.c
+++ b/drivers/serial/pxa.c
@@ -48,6 +48,7 @@
 #include <mach/hardware.h>
 #include <asm/irq.h>
 #include <mach/pxa-regs.h>
+#include <mach/regs-uart.h>
 
 
 struct uart_pxa_port {
@@ -766,7 +767,7 @@ static int serial_pxa_probe(struct platform_device *dev)
         if (!sport)
                 return -ENOMEM;
 
-        sport->clk = clk_get(&dev->dev, "UARTCLK");
+        sport->clk = clk_get(&dev->dev, NULL);
         if (IS_ERR(sport->clk)) {
                 ret = PTR_ERR(sport->clk);
                 goto err_free;
diff --git a/drivers/serial/s3c24a0.c b/drivers/serial/s3c24a0.c
new file mode 100644
index 000000000000..ebf2fd3c8f7d
--- /dev/null
+++ b/drivers/serial/s3c24a0.c
@@ -0,0 +1,118 @@
+/* linux/drivers/serial/s3c24a0.c
+ *
+ * Driver for Samsung S3C24A0 SoC onboard UARTs.
+ *
+ * Based on drivers/serial/s3c2410.c
+ *
+ * Author: Sandeep Patil <sandeep.patil@azingo.com>
+ *
+ * Ben Dooks, Copyright (c) 2003-2005,2008 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+
+#include <mach/hardware.h>
+
+#include <plat/regs-serial.h>
+#include <mach/regs-gpio.h>
+
+#include "samsung.h"
+
+static int s3c24a0_serial_setsource(struct uart_port *port,
+                                    struct s3c24xx_uart_clksrc *clk)
+{
+        unsigned long ucon = rd_regl(port, S3C2410_UCON);
+
+        if (strcmp(clk->name, "uclk") == 0)
+                ucon |= S3C2410_UCON_UCLK;
+        else
+                ucon &= ~S3C2410_UCON_UCLK;
+
+        wr_regl(port, S3C2410_UCON, ucon);
+        return 0;
+}
+
+static int s3c24a0_serial_getsource(struct uart_port *port,
+                                    struct s3c24xx_uart_clksrc *clk)
+{
+        unsigned long ucon = rd_regl(port, S3C2410_UCON);
+
+        clk->divisor = 1;
+        clk->name = (ucon & S3C2410_UCON_UCLK) ? "uclk" : "pclk";
+
+        return 0;
+}
+
+static int s3c24a0_serial_resetport(struct uart_port *port,
+                                    struct s3c2410_uartcfg *cfg)
+{
+        dbg("s3c24a0_serial_resetport: port=%p (%08lx), cfg=%p\n",
+            port, port->mapbase, cfg);
+
+        wr_regl(port, S3C2410_UCON,  cfg->ucon);
+        wr_regl(port, S3C2410_ULCON, cfg->ulcon);
+
+        /* reset both fifos */
+
+        wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
+        wr_regl(port, S3C2410_UFCON, cfg->ufcon);
+
+        return 0;
+}
+
+static struct s3c24xx_uart_info s3c24a0_uart_inf = {
+        .name           = "Samsung S3C24A0 UART",
+        .type           = PORT_S3C2410,
+        .fifosize       = 16,
+        .rx_fifomask    = S3C24A0_UFSTAT_RXMASK,
+        .rx_fifoshift   = S3C24A0_UFSTAT_RXSHIFT,
+        .rx_fifofull    = S3C24A0_UFSTAT_RXFULL,
+        .tx_fifofull    = S3C24A0_UFSTAT_TXFULL,
+        .tx_fifomask    = S3C24A0_UFSTAT_TXMASK,
+        .tx_fifoshift   = S3C24A0_UFSTAT_TXSHIFT,
+        .get_clksrc     = s3c24a0_serial_getsource,
+        .set_clksrc     = s3c24a0_serial_setsource,
+        .reset_port     = s3c24a0_serial_resetport,
+};
+
+static int s3c24a0_serial_probe(struct platform_device *dev)
+{
+        return s3c24xx_serial_probe(dev, &s3c24a0_uart_inf);
+}
+
+static struct platform_driver s3c24a0_serial_drv = {
+        .probe          = s3c24a0_serial_probe,
+        .remove         = s3c24xx_serial_remove,
+        .driver         = {
+                .name   = "s3c24a0-uart",
+                .owner  = THIS_MODULE,
+        },
+};
+
+s3c24xx_console_init(&s3c24a0_serial_drv, &s3c24a0_uart_inf);
+
+static int __init s3c24a0_serial_init(void)
+{
+        return s3c24xx_serial_init(&s3c24a0_serial_drv, &s3c24a0_uart_inf);
+}
+
+static void __exit s3c24a0_serial_exit(void)
+{
+        platform_driver_unregister(&s3c24a0_serial_drv);
+}
+
+module_init(s3c24a0_serial_init);
+module_exit(s3c24a0_serial_exit);
+
diff --git a/drivers/serial/s3c6400.c b/drivers/serial/s3c6400.c
new file mode 100644
index 000000000000..06936d13393f
--- /dev/null
+++ b/drivers/serial/s3c6400.c
@@ -0,0 +1,151 @@
+/* linux/drivers/serial/s3c6400.c
+ *
+ * Driver for Samsung S3C6400 and S3C6410 SoC onboard UARTs.
+ *
+ * Copyright 2008 Openmoko,  Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+
+#include <asm/irq.h>
+#include <mach/hardware.h>
+
+#include <plat/regs-serial.h>
+
+#include "samsung.h"
+
+static int s3c6400_serial_setsource(struct uart_port *port,
+                                    struct s3c24xx_uart_clksrc *clk)
+{
+        unsigned long ucon = rd_regl(port, S3C2410_UCON);
+
+        if (strcmp(clk->name, "uclk0") == 0) {
+                ucon &= ~S3C6400_UCON_CLKMASK;
+                ucon |= S3C6400_UCON_UCLK0;
+        } else if (strcmp(clk->name, "uclk1") == 0)
+                ucon |= S3C6400_UCON_UCLK1;
+        else if (strcmp(clk->name, "pclk") == 0) {
+                /* See notes about transitioning from UCLK to PCLK */
+                ucon &= ~S3C6400_UCON_UCLK0;
+        } else {
+                printk(KERN_ERR "unknown clock source %s\n", clk->name);
+                return -EINVAL;
+        }
+
+        wr_regl(port, S3C2410_UCON, ucon);
+        return 0;
+}
+
+
+static int s3c6400_serial_getsource(struct uart_port *port,
+                                    struct s3c24xx_uart_clksrc *clk)
+{
+        u32 ucon = rd_regl(port, S3C2410_UCON);
+
+        clk->divisor = 1;
+
+        switch (ucon & S3C6400_UCON_CLKMASK) {
+        case S3C6400_UCON_UCLK0:
+                clk->name = "uclk0";
+                break;
+
+        case S3C6400_UCON_UCLK1:
+                clk->name = "uclk1";
+                break;
+
+        case S3C6400_UCON_PCLK:
+        case S3C6400_UCON_PCLK2:
+                clk->name = "pclk";
+                break;
+        }
+
+        return 0;
+}
+
+static int s3c6400_serial_resetport(struct uart_port *port,
+                                    struct s3c2410_uartcfg *cfg)
+{
+        unsigned long ucon = rd_regl(port, S3C2410_UCON);
+
+        dbg("s3c6400_serial_resetport: port=%p (%08lx), cfg=%p\n",
+            port, port->mapbase, cfg);
+
+        /* ensure we don't change the clock settings... */
+
+        ucon &= S3C6400_UCON_CLKMASK;
+
+        wr_regl(port, S3C2410_UCON,  ucon | cfg->ucon);
+        wr_regl(port, S3C2410_ULCON, cfg->ulcon);
+
+        /* reset both fifos */
+
+        wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
+        wr_regl(port, S3C2410_UFCON, cfg->ufcon);
+
+        return 0;
+}
+
+static struct s3c24xx_uart_info s3c6400_uart_inf = {
+        .name           = "Samsung S3C6400 UART",
+        .type           = PORT_S3C6400,
+        .fifosize       = 64,
+        .rx_fifomask    = S3C2440_UFSTAT_RXMASK,
+        .rx_fifoshift   = S3C2440_UFSTAT_RXSHIFT,
+        .rx_fifofull    = S3C2440_UFSTAT_RXFULL,
+        .tx_fifofull    = S3C2440_UFSTAT_TXFULL,
+        .tx_fifomask    = S3C2440_UFSTAT_TXMASK,
+        .tx_fifoshift   = S3C2440_UFSTAT_TXSHIFT,
+        .get_clksrc     = s3c6400_serial_getsource,
+        .set_clksrc     = s3c6400_serial_setsource,
+        .reset_port     = s3c6400_serial_resetport,
+};
+
+/* device management */
+
+static int s3c6400_serial_probe(struct platform_device *dev)
+{
+        dbg("s3c6400_serial_probe: dev=%p\n", dev);
+        return s3c24xx_serial_probe(dev, &s3c6400_uart_inf);
+}
+
+static struct platform_driver s3c6400_serial_drv = {
+        .probe          = s3c6400_serial_probe,
+        .remove         = s3c24xx_serial_remove,
+        .driver         = {
+                .name   = "s3c6400-uart",
+                .owner  = THIS_MODULE,
+        },
+};
+
+s3c24xx_console_init(&s3c6400_serial_drv, &s3c6400_uart_inf);
+
+static int __init s3c6400_serial_init(void)
+{
+        return s3c24xx_serial_init(&s3c6400_serial_drv, &s3c6400_uart_inf);
+}
+
+static void __exit s3c6400_serial_exit(void)
+{
+        platform_driver_unregister(&s3c6400_serial_drv);
+}
+
+module_init(s3c6400_serial_init);
+module_exit(s3c6400_serial_exit);
+
+MODULE_DESCRIPTION("Samsung S3C6400,S3C6410 SoC Serial port driver");
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:s3c6400-uart");
diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c
index 1e219d3d0352..41ac94872b8d 100644
--- a/drivers/serial/samsung.c
+++ b/drivers/serial/samsung.c
@@ -42,13 +42,14 @@
 #include <linux/serial.h>
 #include <linux/delay.h>
 #include <linux/clk.h>
+#include <linux/cpufreq.h>
 
 #include <asm/irq.h>
 
 #include <mach/hardware.h>
+#include <mach/map.h>
 
 #include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
 
 #include "samsung.h"
 
@@ -58,19 +59,6 @@
 #define S3C24XX_SERIAL_MAJOR    204
 #define S3C24XX_SERIAL_MINOR    64
 
-/* we can support 3 uarts, but not always use them */
-
-#ifdef CONFIG_CPU_S3C2400
-#define NR_PORTS (2)
-#else
-#define NR_PORTS (3)
-#endif
-
-/* port irq numbers */
-
-#define TX_IRQ(port) ((port)->irq + 1)
-#define RX_IRQ(port) ((port)->irq)
-
 /* macros to change one thing to another */
 
 #define tx_enabled(port) ((port)->unused[0])
@@ -136,8 +124,10 @@ static void s3c24xx_serial_rx_disable(struct uart_port *port)
 
 static void s3c24xx_serial_stop_tx(struct uart_port *port)
 {
+        struct s3c24xx_uart_port *ourport = to_ourport(port);
+
         if (tx_enabled(port)) {
-                disable_irq(TX_IRQ(port));
+                disable_irq(ourport->tx_irq);
                 tx_enabled(port) = 0;
                 if (port->flags & UPF_CONS_FLOW)
                         s3c24xx_serial_rx_enable(port);
@@ -146,11 +136,13 @@ static void s3c24xx_serial_stop_tx(struct uart_port *port)
 
 static void s3c24xx_serial_start_tx(struct uart_port *port)
 {
+        struct s3c24xx_uart_port *ourport = to_ourport(port);
+
         if (!tx_enabled(port)) {
                 if (port->flags & UPF_CONS_FLOW)
                         s3c24xx_serial_rx_disable(port);
 
-                enable_irq(TX_IRQ(port));
+                enable_irq(ourport->tx_irq);
                 tx_enabled(port) = 1;
         }
 }
@@ -158,9 +150,11 @@ static void s3c24xx_serial_start_tx(struct uart_port *port)
 
 static void s3c24xx_serial_stop_rx(struct uart_port *port)
 {
+        struct s3c24xx_uart_port *ourport = to_ourport(port);
+
         if (rx_enabled(port)) {
                 dbg("s3c24xx_serial_stop_rx: port=%p\n", port);
-                disable_irq(RX_IRQ(port));
+                disable_irq(ourport->rx_irq);
                 rx_enabled(port) = 0;
         }
 }
@@ -384,13 +378,13 @@ static void s3c24xx_serial_shutdown(struct uart_port *port)
         struct s3c24xx_uart_port *ourport = to_ourport(port);
 
         if (ourport->tx_claimed) {
-                free_irq(TX_IRQ(port), ourport);
+                free_irq(ourport->tx_irq, ourport);
                 tx_enabled(port) = 0;
                 ourport->tx_claimed = 0;
         }
 
         if (ourport->rx_claimed) {
-                free_irq(RX_IRQ(port), ourport);
+                free_irq(ourport->rx_irq, ourport);
                 ourport->rx_claimed = 0;
                 rx_enabled(port) = 0;
         }
@@ -407,12 +401,11 @@ static int s3c24xx_serial_startup(struct uart_port *port)
 
         rx_enabled(port) = 1;
 
-        ret = request_irq(RX_IRQ(port),
-                          s3c24xx_serial_rx_chars, 0,
+        ret = request_irq(ourport->rx_irq, s3c24xx_serial_rx_chars, 0,
                           s3c24xx_serial_portname(port), ourport);
 
         if (ret != 0) {
-                printk(KERN_ERR "cannot get irq %d\n", RX_IRQ(port));
+                printk(KERN_ERR "cannot get irq %d\n", ourport->rx_irq);
                 return ret;
         }
 
@@ -422,12 +415,11 @@ static int s3c24xx_serial_startup(struct uart_port *port)
 
         tx_enabled(port) = 1;
 
-        ret = request_irq(TX_IRQ(port),
-                          s3c24xx_serial_tx_chars, 0,
+        ret = request_irq(ourport->tx_irq, s3c24xx_serial_tx_chars, 0,
                           s3c24xx_serial_portname(port), ourport);
 
         if (ret) {
-                printk(KERN_ERR "cannot get irq %d\n", TX_IRQ(port));
+                printk(KERN_ERR "cannot get irq %d\n", ourport->tx_irq);
                 goto err;
         }
 
@@ -452,6 +444,8 @@ static void s3c24xx_serial_pm(struct uart_port *port, unsigned int level,
 {
         struct s3c24xx_uart_port *ourport = to_ourport(port);
 
+        ourport->pm_level = level;
+
         switch (level) {
         case 3:
                 if (!IS_ERR(ourport->baudclk) && ourport->baudclk != NULL)
@@ -661,6 +655,7 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
 
                 ourport->clksrc = clksrc;
                 ourport->baudclk = clk;
+                ourport->baudclk_rate = clk ? clk_get_rate(clk) : 0;
         }
 
         switch (termios->c_cflag & CSIZE) {
@@ -752,6 +747,8 @@ static const char *s3c24xx_serial_type(struct uart_port *port)
                 return "S3C2440";
         case PORT_S3C2412:
                 return "S3C2412";
+        case PORT_S3C6400:
+                return "S3C6400/10";
         default:
                 return NULL;
         }
@@ -827,14 +824,14 @@ static struct uart_ops s3c24xx_serial_ops = {
 static struct uart_driver s3c24xx_uart_drv = {
         .owner          = THIS_MODULE,
         .dev_name       = "s3c2410_serial",
-        .nr             = 3,
+        .nr             = CONFIG_SERIAL_SAMSUNG_UARTS,
         .cons           = S3C24XX_SERIAL_CONSOLE,
         .driver_name    = S3C24XX_SERIAL_NAME,
         .major          = S3C24XX_SERIAL_MAJOR,
         .minor          = S3C24XX_SERIAL_MINOR,
 };
 
-static struct s3c24xx_uart_port s3c24xx_serial_ports[NR_PORTS] = {
+static struct s3c24xx_uart_port s3c24xx_serial_ports[CONFIG_SERIAL_SAMSUNG_UARTS] = {
         [0] = {
                 .port = {
                         .lock           = __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[0].port.lock),
@@ -859,7 +856,7 @@ static struct s3c24xx_uart_port s3c24xx_serial_ports[NR_PORTS] = {
                         .line           = 1,
                 }
         },
-#if NR_PORTS > 2
+#if CONFIG_SERIAL_SAMSUNG_UARTS > 2
 
         [2] = {
                 .port = {
@@ -872,6 +869,20 @@ static struct s3c24xx_uart_port s3c24xx_serial_ports[NR_PORTS] = {
                         .flags          = UPF_BOOT_AUTOCONF,
                         .line           = 2,
                 }
+        },
+#endif
+#if CONFIG_SERIAL_SAMSUNG_UARTS > 3
+        [3] = {
+                .port = {
+                        .lock           = __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[3].port.lock),
+                        .iotype         = UPIO_MEM,
+                        .irq            = IRQ_S3CUART_RX3,
+                        .uartclk        = 0,
+                        .fifosize       = 16,
+                        .ops            = &s3c24xx_serial_ops,
+                        .flags          = UPF_BOOT_AUTOCONF,
+                        .line           = 3,
+                }
         }
 #endif
 };
@@ -890,6 +901,89 @@ static inline int s3c24xx_serial_resetport(struct uart_port *port,
         return (info->reset_port)(port, cfg);
 }
 
+
+#ifdef CONFIG_CPU_FREQ
+
+static int s3c24xx_serial_cpufreq_transition(struct notifier_block *nb,
+                                             unsigned long val, void *data)
+{
+        struct s3c24xx_uart_port *port;
+        struct uart_port *uport;
+
+        port = container_of(nb, struct s3c24xx_uart_port, freq_transition);
+        uport = &port->port;
+
+        /* check to see if port is enabled */
+
+        if (port->pm_level != 0)
+                return 0;
+
+        /* try and work out if the baudrate is changing, we can detect
+         * a change in rate, but we do not have support for detecting
+         * a disturbance in the clock-rate over the change.
+         */
+
+        if (IS_ERR(port->clk))
+                goto exit;
+
+        if (port->baudclk_rate == clk_get_rate(port->clk))
+                goto exit;
+
+        if (val == CPUFREQ_PRECHANGE) {
+                /* we should really shut the port down whilst the
+                 * frequency change is in progress. */
+
+        } else if (val == CPUFREQ_POSTCHANGE) {
+                struct ktermios *termios;
+                struct tty_struct *tty;
+
+                if (uport->info == NULL)
+                        goto exit;
+
+                tty = uport->info->port.tty;
+
+                if (tty == NULL)
+                        goto exit;
+
+                termios = tty->termios;
+
+                if (termios == NULL) {
+                        printk(KERN_WARNING "%s: no termios?\n", __func__);
+                        goto exit;
+                }
+
+                s3c24xx_serial_set_termios(uport, termios, NULL);
+        }
+
+ exit:
+        return 0;
+}
+
+static inline int s3c24xx_serial_cpufreq_register(struct s3c24xx_uart_port *port)
+{
+        port->freq_transition.notifier_call = s3c24xx_serial_cpufreq_transition;
+
+        return cpufreq_register_notifier(&port->freq_transition,
+                                         CPUFREQ_TRANSITION_NOTIFIER);
+}
+
+static inline void s3c24xx_serial_cpufreq_deregister(struct s3c24xx_uart_port *port)
+{
+        cpufreq_unregister_notifier(&port->freq_transition,
+                                    CPUFREQ_TRANSITION_NOTIFIER);
+}
+
+#else
+static inline int s3c24xx_serial_cpufreq_register(struct s3c24xx_uart_port *port)
+{
+        return 0;
+}
+
+static inline void s3c24xx_serial_cpufreq_deregister(struct s3c24xx_uart_port *port)
+{
+}
+#endif
+
 /* s3c24xx_serial_init_port
  *
  * initialise a single serial port from the platform device given
@@ -914,8 +1008,11 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
         if (port->mapbase != 0)
                 return 0;
 
-        if (cfg->hwport > 3)
-                return -EINVAL;
+        if (cfg->hwport > CONFIG_SERIAL_SAMSUNG_UARTS) {
+                printk(KERN_ERR "%s: port %d bigger than %d\n", __func__,
+                       cfg->hwport, CONFIG_SERIAL_SAMSUNG_UARTS);
+                return -ERANGE;
+        }
 
         /* setup info for port */
         port->dev       = &platdev->dev;
@@ -943,18 +1040,26 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
 
         dbg("resource %p (%lx..%lx)\n", res, res->start, res->end);
 
-        port->mapbase   = res->start;
-        port->membase   = S3C24XX_VA_UART + (res->start - S3C24XX_PA_UART);
+        port->mapbase = res->start;
+        port->membase = S3C_VA_UART + res->start - (S3C_PA_UART & 0xfff00000);
         ret = platform_get_irq(platdev, 0);
         if (ret < 0)
                 port->irq = 0;
-        else
+        else {
                 port->irq = ret;
+                ourport->rx_irq = ret;
+                ourport->tx_irq = ret + 1;
+        }
+        
+        ret = platform_get_irq(platdev, 1);
+        if (ret > 0)
+                ourport->tx_irq = ret;
 
         ourport->clk    = clk_get(&platdev->dev, "uart");
 
-        dbg("port: map=%08x, mem=%08x, irq=%d, clock=%ld\n",
-            port->mapbase, port->membase, port->irq, port->uartclk);
+        dbg("port: map=%08x, mem=%08x, irq=%d (%d,%d), clock=%ld\n",
+            port->mapbase, port->membase, port->irq,
+            ourport->rx_irq, ourport->tx_irq, port->uartclk);
 
         /* reset the fifos (and setup the uart) */
         s3c24xx_serial_resetport(port, cfg);
@@ -1002,6 +1107,10 @@ int s3c24xx_serial_probe(struct platform_device *dev,
         if (ret < 0)
                 printk(KERN_ERR "%s: failed to add clksrc attr.\n", __func__);
 
+        ret = s3c24xx_serial_cpufreq_register(ourport);
+        if (ret < 0)
+                dev_err(&dev->dev, "failed to add cpufreq notifier\n");
+
         return 0;
 
  probe_err:
@@ -1015,6 +1124,7 @@ int s3c24xx_serial_remove(struct platform_device *dev)
         struct uart_port *port = s3c24xx_dev_to_port(&dev->dev);
 
         if (port) {
+                s3c24xx_serial_cpufreq_deregister(to_ourport(port));
                 device_remove_file(&dev->dev, &dev_attr_clock_source);
                 uart_remove_one_port(&s3c24xx_uart_drv, port);
         }
@@ -1219,7 +1329,7 @@ static int s3c24xx_serial_init_ports(struct s3c24xx_uart_info *info)
 
         platdev_ptr = s3c24xx_uart_devs;
 
-        for (i = 0; i < NR_PORTS; i++, ptr++, platdev_ptr++) {
+        for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++, ptr++, platdev_ptr++) {
                 s3c24xx_serial_init_port(ptr, info, *platdev_ptr);
         }
 
@@ -1240,7 +1350,7 @@ s3c24xx_serial_console_setup(struct console *co, char *options)
 
         /* is this a valid port */
 
-        if (co->index == -1 || co->index >= NR_PORTS)
+        if (co->index == -1 || co->index >= CONFIG_SERIAL_SAMSUNG_UARTS)
                 co->index = 0;
 
         port = &s3c24xx_serial_ports[co->index].port;
diff --git a/drivers/serial/samsung.h b/drivers/serial/samsung.h
index 5c92ebbe7d9e..571d6b90d206 100644
--- a/drivers/serial/samsung.h
+++ b/drivers/serial/samsung.h
@@ -33,12 +33,21 @@ struct s3c24xx_uart_info {
 struct s3c24xx_uart_port {
         unsigned char                   rx_claimed;
         unsigned char                   tx_claimed;
+        unsigned int                    pm_level;
+        unsigned long                   baudclk_rate;
+
+        unsigned int                    rx_irq;
+        unsigned int                    tx_irq;
 
         struct s3c24xx_uart_info        *info;
         struct s3c24xx_uart_clksrc      *clksrc;
         struct clk                      *clk;
         struct clk                      *baudclk;
         struct uart_port                port;
+
+#ifdef CONFIG_CPU_FREQ
+        struct notifier_block           freq_transition;
+#endif
 };
 
 /* conversion functions */
diff --git a/drivers/serial/serial_lh7a40x.c b/drivers/serial/serial_lh7a40x.c
index 61dc8b3daa26..a7bf024a8286 100644
--- a/drivers/serial/serial_lh7a40x.c
+++ b/drivers/serial/serial_lh7a40x.c
@@ -41,9 +41,10 @@
 #include <linux/tty_flip.h>
 #include <linux/serial_core.h>
 #include <linux/serial.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
 #include <asm/irq.h>
+#include <mach/hardware.h>
 
 #define DEV_MAJOR       204
 #define DEV_MINOR       16