aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/serial
diff options
context:
space:
mode:
authorPatrick Gefre <pfg@sgi.com>2006-01-14 16:20:40 -0500
committerLinus Torvalds <torvalds@g5.osdl.org>2006-01-14 21:25:20 -0500
commit2d0cfb527944c2cfee2cffab14f52d483e329fcf (patch)
treeb2e3340b52d83b51674f3782a208850d53d3d24d /drivers/serial
parent7170be5f586b59bdcdab082778a5d9203ba7b667 (diff)
[PATCH] Altix: ioc3 serial support
Add driver support for a 2 port PCI IOC3-based serial card on Altix boxes: This is a re-submission. On the original submission I was asked to organize the code so that the MIPS ioc3 ethernet and serial parts could be used with this driver. Stanislaw Skowronek was kind enough to provide the shim layer for this - thanks Stanislaw. This patch includes the shim layer and the Altix PCI ioc3 serial driver. The MIPS merged ioc3 ethernet and serial support is forthcoming. Signed-off-by: Patrick Gefre <pfg@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Diffstat (limited to 'drivers/serial')
-rw-r--r--drivers/serial/Kconfig9
-rw-r--r--drivers/serial/Makefile1
-rw-r--r--drivers/serial/ioc3_serial.c2197
3 files changed, 2206 insertions, 1 deletions
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 843717275d49..e0685a520514 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -190,7 +190,6 @@ config SERIAL_8250_BOCA
190 To compile this driver as a module, choose M here: the module 190 To compile this driver as a module, choose M here: the module
191 will be called 8250_boca. 191 will be called 8250_boca.
192 192
193
194config SERIAL_8250_HUB6 193config SERIAL_8250_HUB6
195 tristate "Support Hub6 cards" 194 tristate "Support Hub6 cards"
196 depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS 195 depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
@@ -917,4 +916,12 @@ config SERIAL_SGI_IOC4
917 and wish to use the serial ports on this card, say Y. 916 and wish to use the serial ports on this card, say Y.
918 Otherwise, say N. 917 Otherwise, say N.
919 918
919config SERIAL_SGI_IOC3
920 tristate "SGI Altix IOC3 serial support"
921 depends on (IA64_GENERIC || IA64_SGI_SN2) && SGI_IOC3
922 select SERIAL_CORE
923 help
924 If you have an SGI Altix with an IOC3 serial card,
925 say Y or M. Otherwise, say N.
926
920endmenu 927endmenu
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 24a583e482bb..eaf8e01db198 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -56,4 +56,5 @@ obj-$(CONFIG_SERIAL_JSM) += jsm/
56obj-$(CONFIG_SERIAL_TXX9) += serial_txx9.o 56obj-$(CONFIG_SERIAL_TXX9) += serial_txx9.o
57obj-$(CONFIG_SERIAL_VR41XX) += vr41xx_siu.o 57obj-$(CONFIG_SERIAL_VR41XX) += vr41xx_siu.o
58obj-$(CONFIG_SERIAL_SGI_IOC4) += ioc4_serial.o 58obj-$(CONFIG_SERIAL_SGI_IOC4) += ioc4_serial.o
59obj-$(CONFIG_SERIAL_SGI_IOC3) += ioc3_serial.o
59obj-$(CONFIG_SERIAL_AT91) += at91_serial.o 60obj-$(CONFIG_SERIAL_AT91) += at91_serial.o
diff --git a/drivers/serial/ioc3_serial.c b/drivers/serial/ioc3_serial.c
new file mode 100644
index 000000000000..8097cd91f16b
--- /dev/null
+++ b/drivers/serial/ioc3_serial.c
@@ -0,0 +1,2197 @@
1/*
2 * This file is subject to the terms and conditions of the GNU General Public
3 * License. See the file "COPYING" in the main directory of this archive
4 * for more details.
5 *
6 * Copyright (C) 2005 Silicon Graphics, Inc. All Rights Reserved.
7 */
8
9/*
10 * This file contains a module version of the ioc3 serial driver. This
11 * includes all the support functions needed (support functions, etc.)
12 * and the serial driver itself.
13 */
14#include <linux/errno.h>
15#include <linux/tty.h>
16#include <linux/serial.h>
17#include <linux/circ_buf.h>
18#include <linux/serial_reg.h>
19#include <linux/module.h>
20#include <linux/pci.h>
21#include <linux/serial_core.h>
22#include <linux/ioc3.h>
23
24/*
25 * Interesting things about the ioc3
26 */
27
28#define LOGICAL_PORTS 2 /* rs232(0) and rs422(1) */
29#define PORTS_PER_CARD 2
30#define LOGICAL_PORTS_PER_CARD (PORTS_PER_CARD * LOGICAL_PORTS)
31#define MAX_CARDS 8
32#define MAX_LOGICAL_PORTS (LOGICAL_PORTS_PER_CARD * MAX_CARDS)
33
34/* determine given the sio_ir what port it applies to */
35#define GET_PORT_FROM_SIO_IR(_x) (_x & SIO_IR_SA) ? 0 : 1
36
37
38/*
39 * we have 2 logical ports (rs232, rs422) for each physical port
40 * evens are rs232, odds are rs422
41 */
42#define GET_PHYSICAL_PORT(_x) ((_x) >> 1)
43#define GET_LOGICAL_PORT(_x) ((_x) & 1)
44#define IS_PHYSICAL_PORT(_x) !((_x) & 1)
45#define IS_RS232(_x) !((_x) & 1)
46
47static unsigned int Num_of_ioc3_cards;
48static unsigned int Submodule_slot;
49
50/* defining this will get you LOTS of great debug info */
51//#define DEBUG_INTERRUPTS
52#define DPRINT_CONFIG(_x...) ;
53//#define DPRINT_CONFIG(_x...) printk _x
54#define NOT_PROGRESS() ;
55//#define NOT_PROGRESS() printk("%s : fails %d\n", __FUNCTION__, __LINE__)
56
57/* number of characters we want to transmit to the lower level at a time */
58#define MAX_CHARS 256
59#define FIFO_SIZE (MAX_CHARS-1) /* it's a uchar */
60
61/* Device name we're using */
62#define DEVICE_NAME "ttySIOC"
63#define DEVICE_MAJOR 204
64#define DEVICE_MINOR 116
65
66/* flags for next_char_state */
67#define NCS_BREAK 0x1
68#define NCS_PARITY 0x2
69#define NCS_FRAMING 0x4
70#define NCS_OVERRUN 0x8
71
72/* cause we need SOME parameters ... */
73#define MIN_BAUD_SUPPORTED 1200
74#define MAX_BAUD_SUPPORTED 115200
75
76/* protocol types supported */
77#define PROTO_RS232 0
78#define PROTO_RS422 1
79
80/* Notification types */
81#define N_DATA_READY 0x01
82#define N_OUTPUT_LOWAT 0x02
83#define N_BREAK 0x04
84#define N_PARITY_ERROR 0x08
85#define N_FRAMING_ERROR 0x10
86#define N_OVERRUN_ERROR 0x20
87#define N_DDCD 0x40
88#define N_DCTS 0x80
89
90#define N_ALL_INPUT (N_DATA_READY | N_BREAK \
91 | N_PARITY_ERROR | N_FRAMING_ERROR \
92 | N_OVERRUN_ERROR | N_DDCD | N_DCTS)
93
94#define N_ALL_OUTPUT N_OUTPUT_LOWAT
95
96#define N_ALL_ERRORS (N_PARITY_ERROR | N_FRAMING_ERROR \
97 | N_OVERRUN_ERROR)
98
99#define N_ALL (N_DATA_READY | N_OUTPUT_LOWAT | N_BREAK \
100 | N_PARITY_ERROR | N_FRAMING_ERROR \
101 | N_OVERRUN_ERROR | N_DDCD | N_DCTS)
102
103#define SER_CLK_SPEED(prediv) ((22000000 << 1) / prediv)
104#define SER_DIVISOR(x, clk) (((clk) + (x) * 8) / ((x) * 16))
105#define DIVISOR_TO_BAUD(div, clk) ((clk) / 16 / (div))
106
107/* Some masks */
108#define LCR_MASK_BITS_CHAR (UART_LCR_WLEN5 | UART_LCR_WLEN6 \
109 | UART_LCR_WLEN7 | UART_LCR_WLEN8)
110#define LCR_MASK_STOP_BITS (UART_LCR_STOP)
111
112#define PENDING(_a, _p) (readl(&(_p)->vma->sio_ir) & (_a)->ic_enable)
113
114#define RING_BUF_SIZE 4096
115#define BUF_SIZE_BIT SBBR_L_SIZE
116#define PROD_CONS_MASK PROD_CONS_PTR_4K
117
118#define TOTAL_RING_BUF_SIZE (RING_BUF_SIZE * 4)
119
120/* driver specific - one per card */
121struct ioc3_card {
122 struct {
123 /* uart ports are allocated here */
124 struct uart_port icp_uart_port[LOGICAL_PORTS];
125 /* the ioc3_port used for this port */
126 struct ioc3_port *icp_port;
127 } ic_port[PORTS_PER_CARD];
128 /* currently enabled interrupts */
129 uint32_t ic_enable;
130};
131
132/* Local port info for each IOC3 serial port */
133struct ioc3_port {
134 /* handy reference material */
135 struct uart_port *ip_port;
136 struct ioc3_card *ip_card;
137 struct ioc3_driver_data *ip_idd;
138 struct ioc3_submodule *ip_is;
139
140 /* pci mem addresses for this port */
141 struct ioc3_serialregs __iomem *ip_serial_regs;
142 struct ioc3_uartregs __iomem *ip_uart_regs;
143
144 /* Ring buffer page for this port */
145 dma_addr_t ip_dma_ringbuf;
146 /* vaddr of ring buffer */
147 struct ring_buffer *ip_cpu_ringbuf;
148
149 /* Rings for this port */
150 struct ring *ip_inring;
151 struct ring *ip_outring;
152
153 /* Hook to port specific values */
154 struct port_hooks *ip_hooks;
155
156 spinlock_t ip_lock;
157
158 /* Various rx/tx parameters */
159 int ip_baud;
160 int ip_tx_lowat;
161 int ip_rx_timeout;
162
163 /* Copy of notification bits */
164 int ip_notify;
165
166 /* Shadow copies of various registers so we don't need to PIO
167 * read them constantly
168 */
169 uint32_t ip_sscr;
170 uint32_t ip_tx_prod;
171 uint32_t ip_rx_cons;
172 unsigned char ip_flags;
173};
174
175/* tx low water mark. We need to notify the driver whenever tx is getting
176 * close to empty so it can refill the tx buffer and keep things going.
177 * Let's assume that if we interrupt 1 ms before the tx goes idle, we'll
178 * have no trouble getting in more chars in time (I certainly hope so).
179 */
180#define TX_LOWAT_LATENCY 1000
181#define TX_LOWAT_HZ (1000000 / TX_LOWAT_LATENCY)
182#define TX_LOWAT_CHARS(baud) (baud / 10 / TX_LOWAT_HZ)
183
184/* Flags per port */
185#define INPUT_HIGH 0x01
186 /* used to signify that we have turned off the rx_high
187 * temporarily - we need to drain the fifo and don't
188 * want to get blasted with interrupts.
189 */
190#define DCD_ON 0x02
191 /* DCD state is on */
192#define LOWAT_WRITTEN 0x04
193#define READ_ABORTED 0x08
194 /* the read was aborted - used to avaoid infinate looping
195 * in the interrupt handler
196 */
197#define INPUT_ENABLE 0x10
198
199/* Since each port has different register offsets and bitmasks
200 * for everything, we'll store those that we need in tables so we
201 * don't have to be constantly checking the port we are dealing with.
202 */
203struct port_hooks {
204 uint32_t intr_delta_dcd;
205 uint32_t intr_delta_cts;
206 uint32_t intr_tx_mt;
207 uint32_t intr_rx_timer;
208 uint32_t intr_rx_high;
209 uint32_t intr_tx_explicit;
210 uint32_t intr_clear;
211 uint32_t intr_all;
212 char rs422_select_pin;
213};
214
215static struct port_hooks hooks_array[PORTS_PER_CARD] = {
216 /* values for port A */
217 {
218 .intr_delta_dcd = SIO_IR_SA_DELTA_DCD,
219 .intr_delta_cts = SIO_IR_SA_DELTA_CTS,
220 .intr_tx_mt = SIO_IR_SA_TX_MT,
221 .intr_rx_timer = SIO_IR_SA_RX_TIMER,
222 .intr_rx_high = SIO_IR_SA_RX_HIGH,
223 .intr_tx_explicit = SIO_IR_SA_TX_EXPLICIT,
224 .intr_clear = (SIO_IR_SA_TX_MT | SIO_IR_SA_RX_FULL
225 | SIO_IR_SA_RX_HIGH
226 | SIO_IR_SA_RX_TIMER
227 | SIO_IR_SA_DELTA_DCD
228 | SIO_IR_SA_DELTA_CTS
229 | SIO_IR_SA_INT
230 | SIO_IR_SA_TX_EXPLICIT
231 | SIO_IR_SA_MEMERR),
232 .intr_all = SIO_IR_SA,
233 .rs422_select_pin = GPPR_UARTA_MODESEL_PIN,
234 },
235
236 /* values for port B */
237 {
238 .intr_delta_dcd = SIO_IR_SB_DELTA_DCD,
239 .intr_delta_cts = SIO_IR_SB_DELTA_CTS,
240 .intr_tx_mt = SIO_IR_SB_TX_MT,
241 .intr_rx_timer = SIO_IR_SB_RX_TIMER,
242 .intr_rx_high = SIO_IR_SB_RX_HIGH,
243 .intr_tx_explicit = SIO_IR_SB_TX_EXPLICIT,
244 .intr_clear = (SIO_IR_SB_TX_MT | SIO_IR_SB_RX_FULL
245 | SIO_IR_SB_RX_HIGH
246 | SIO_IR_SB_RX_TIMER
247 | SIO_IR_SB_DELTA_DCD
248 | SIO_IR_SB_DELTA_CTS
249 | SIO_IR_SB_INT
250 | SIO_IR_SB_TX_EXPLICIT
251 | SIO_IR_SB_MEMERR),
252 .intr_all = SIO_IR_SB,
253 .rs422_select_pin = GPPR_UARTB_MODESEL_PIN,
254 }
255};
256
257struct ring_entry {
258 union {
259 struct {
260 uint32_t alldata;
261 uint32_t allsc;
262 } all;
263 struct {
264 char data[4]; /* data bytes */
265 char sc[4]; /* status/control */
266 } s;
267 } u;
268};
269
270/* Test the valid bits in any of the 4 sc chars using "allsc" member */
271#define RING_ANY_VALID \
272 ((uint32_t)(RXSB_MODEM_VALID | RXSB_DATA_VALID) * 0x01010101)
273
274#define ring_sc u.s.sc
275#define ring_data u.s.data
276#define ring_allsc u.all.allsc
277
278/* Number of entries per ring buffer. */
279#define ENTRIES_PER_RING (RING_BUF_SIZE / (int) sizeof(struct ring_entry))
280
281/* An individual ring */
282struct ring {
283 struct ring_entry entries[ENTRIES_PER_RING];
284};
285
286/* The whole enchilada */
287struct ring_buffer {
288 struct ring TX_A;
289 struct ring RX_A;
290 struct ring TX_B;
291 struct ring RX_B;
292};
293
294/* Get a ring from a port struct */
295#define RING(_p, _wh) &(((struct ring_buffer *)((_p)->ip_cpu_ringbuf))->_wh)
296
297/* for Infinite loop detection */
298#define MAXITER 10000000
299
300
301/**
302 * set_baud - Baud rate setting code
303 * @port: port to set
304 * @baud: baud rate to use
305 */
306static int set_baud(struct ioc3_port *port, int baud)
307{
308 int divisor;
309 int actual_baud;
310 int diff;
311 int lcr, prediv;
312 struct ioc3_uartregs __iomem *uart;
313
314 for (prediv = 6; prediv < 64; prediv++) {
315 divisor = SER_DIVISOR(baud, SER_CLK_SPEED(prediv));
316 if (!divisor)
317 continue; /* invalid divisor */
318 actual_baud = DIVISOR_TO_BAUD(divisor, SER_CLK_SPEED(prediv));
319
320 diff = actual_baud - baud;
321 if (diff < 0)
322 diff = -diff;
323
324 /* if we're within 1% we've found a match */
325 if (diff * 100 <= actual_baud)
326 break;
327 }
328
329 /* if the above loop completed, we didn't match
330 * the baud rate. give up.
331 */
332 if (prediv == 64) {
333 NOT_PROGRESS();
334 return 1;
335 }
336
337 uart = port->ip_uart_regs;
338 lcr = readb(&uart->iu_lcr);
339
340 writeb(lcr | UART_LCR_DLAB, &uart->iu_lcr);
341 writeb((unsigned char)divisor, &uart->iu_dll);
342 writeb((unsigned char)(divisor >> 8), &uart->iu_dlm);
343 writeb((unsigned char)prediv, &uart->iu_scr);
344 writeb((unsigned char)lcr, &uart->iu_lcr);
345
346 return 0;
347}
348
349/**
350 * get_ioc3_port - given a uart port, return the control structure
351 * @the_port: uart port to find
352 */
353static struct ioc3_port *get_ioc3_port(struct uart_port *the_port)
354{
355 struct ioc3_driver_data *idd = dev_get_drvdata(the_port->dev);
356 struct ioc3_card *card_ptr = idd->data[Submodule_slot];
357 int ii, jj;
358
359 if (!card_ptr) {
360 NOT_PROGRESS();
361 return NULL;
362 }
363 for (ii = 0; ii < PORTS_PER_CARD; ii++) {
364 for (jj = 0; jj < LOGICAL_PORTS; jj++) {
365 if (the_port == &card_ptr->ic_port[ii].icp_uart_port[jj])
366 return card_ptr->ic_port[ii].icp_port;
367 }
368 }
369 NOT_PROGRESS();
370 return NULL;
371}
372
373/**
374 * port_init - Initialize the sio and ioc3 hardware for a given port
375 * called per port from attach...
376 * @port: port to initialize
377 */
378static int inline port_init(struct ioc3_port *port)
379{
380 uint32_t sio_cr;
381 struct port_hooks *hooks = port->ip_hooks;
382 struct ioc3_uartregs __iomem *uart;
383 int reset_loop_counter = 0xfffff;
384 struct ioc3_driver_data *idd = port->ip_idd;
385
386 /* Idle the IOC3 serial interface */
387 writel(SSCR_RESET, &port->ip_serial_regs->sscr);
388
389 /* Wait until any pending bus activity for this port has ceased */
390 do {
391 sio_cr = readl(&idd->vma->sio_cr);
392 if (reset_loop_counter-- <= 0) {
393 printk(KERN_WARNING
394 "IOC3 unable to come out of reset"
395 " scr 0x%x\n", sio_cr);
396 return -1;
397 }
398 } while (!(sio_cr & SIO_CR_ARB_DIAG_IDLE) &&
399 (((sio_cr &= SIO_CR_ARB_DIAG) == SIO_CR_ARB_DIAG_TXA)
400 || sio_cr == SIO_CR_ARB_DIAG_TXB
401 || sio_cr == SIO_CR_ARB_DIAG_RXA
402 || sio_cr == SIO_CR_ARB_DIAG_RXB));
403
404 /* Finish reset sequence */
405 writel(0, &port->ip_serial_regs->sscr);
406
407 /* Once RESET is done, reload cached tx_prod and rx_cons values
408 * and set rings to empty by making prod == cons
409 */
410 port->ip_tx_prod = readl(&port->ip_serial_regs->stcir) & PROD_CONS_MASK;
411 writel(port->ip_tx_prod, &port->ip_serial_regs->stpir);
412 port->ip_rx_cons = readl(&port->ip_serial_regs->srpir) & PROD_CONS_MASK;
413 writel(port->ip_rx_cons | SRCIR_ARM, &port->ip_serial_regs->srcir);
414
415 /* Disable interrupts for this 16550 */
416 uart = port->ip_uart_regs;
417 writeb(0, &uart->iu_lcr);
418 writeb(0, &uart->iu_ier);
419
420 /* Set the default baud */
421 set_baud(port, port->ip_baud);
422
423 /* Set line control to 8 bits no parity */
424 writeb(UART_LCR_WLEN8 | 0, &uart->iu_lcr);
425 /* UART_LCR_STOP == 1 stop */
426
427 /* Enable the FIFOs */
428 writeb(UART_FCR_ENABLE_FIFO, &uart->iu_fcr);
429 /* then reset 16550 FIFOs */
430 writeb(UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT,
431 &uart->iu_fcr);
432
433 /* Clear modem control register */
434 writeb(0, &uart->iu_mcr);
435
436 /* Clear deltas in modem status register */
437 writel(0, &port->ip_serial_regs->shadow);
438
439 /* Only do this once per port pair */
440 if (port->ip_hooks == &hooks_array[0]) {
441 unsigned long ring_pci_addr;
442 uint32_t __iomem *sbbr_l, *sbbr_h;
443
444 sbbr_l = &idd->vma->sbbr_l;
445 sbbr_h = &idd->vma->sbbr_h;
446 ring_pci_addr = (unsigned long __iomem)port->ip_dma_ringbuf;
447 DPRINT_CONFIG(("%s: ring_pci_addr 0x%p\n",
448 __FUNCTION__, (void *)ring_pci_addr));
449
450 writel((unsigned int)((uint64_t) ring_pci_addr >> 32), sbbr_h);
451 writel((unsigned int)ring_pci_addr | BUF_SIZE_BIT, sbbr_l);
452 }
453
454 /* Set the receive timeout value to 10 msec */
455 writel(SRTR_HZ / 100, &port->ip_serial_regs->srtr);
456
457 /* Set rx threshold, enable DMA */
458 /* Set high water mark at 3/4 of full ring */
459 port->ip_sscr = (ENTRIES_PER_RING * 3 / 4);
460
461 /* uart experiences pauses at high baud rate reducing actual
462 * throughput by 10% or so unless we enable high speed polling
463 * XXX when this hardware bug is resolved we should revert to
464 * normal polling speed
465 */
466 port->ip_sscr |= SSCR_HIGH_SPD;
467
468 writel(port->ip_sscr, &port->ip_serial_regs->sscr);
469
470 /* Disable and clear all serial related interrupt bits */
471 port->ip_card->ic_enable &= ~hooks->intr_clear;
472 ioc3_disable(port->ip_is, idd, hooks->intr_clear);
473 ioc3_ack(port->ip_is, idd, hooks->intr_clear);
474 return 0;
475}
476
477/**
478 * enable_intrs - enable interrupts
479 * @port: port to enable
480 * @mask: mask to use
481 */
482static void enable_intrs(struct ioc3_port *port, uint32_t mask)
483{
484 if ((port->ip_card->ic_enable & mask) != mask) {
485 port->ip_card->ic_enable |= mask;
486 ioc3_enable(port->ip_is, port->ip_idd, mask);
487 }
488}
489
490/**
491 * local_open - local open a port
492 * @port: port to open
493 */
494static inline int local_open(struct ioc3_port *port)
495{
496 int spiniter = 0;
497
498 port->ip_flags = INPUT_ENABLE;
499
500 /* Pause the DMA interface if necessary */
501 if (port->ip_sscr & SSCR_DMA_EN) {
502 writel(port->ip_sscr | SSCR_DMA_PAUSE,
503 &port->ip_serial_regs->sscr);
504 while ((readl(&port->ip_serial_regs->sscr)
505 & SSCR_PAUSE_STATE) == 0) {
506 spiniter++;
507 if (spiniter > MAXITER) {
508 NOT_PROGRESS();
509 return -1;
510 }
511 }
512 }
513
514 /* Reset the input fifo. If the uart received chars while the port
515 * was closed and DMA is not enabled, the uart may have a bunch of
516 * chars hanging around in its rx fifo which will not be discarded
517 * by rclr in the upper layer. We must get rid of them here.
518 */
519 writeb(UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR,
520 &port->ip_uart_regs->iu_fcr);
521
522 writeb(UART_LCR_WLEN8, &port->ip_uart_regs->iu_lcr);
523 /* UART_LCR_STOP == 1 stop */
524
525 /* Re-enable DMA, set default threshold to intr whenever there is
526 * data available.
527 */
528 port->ip_sscr &= ~SSCR_RX_THRESHOLD;
529 port->ip_sscr |= 1; /* default threshold */
530
531 /* Plug in the new sscr. This implicitly clears the DMA_PAUSE
532 * flag if it was set above
533 */
534 writel(port->ip_sscr, &port->ip_serial_regs->sscr);
535 port->ip_tx_lowat = 1;
536 return 0;
537}
538
539/**
540 * set_rx_timeout - Set rx timeout and threshold values.
541 * @port: port to use
542 * @timeout: timeout value in ticks
543 */
544static inline int set_rx_timeout(struct ioc3_port *port, int timeout)
545{
546 int threshold;
547
548 port->ip_rx_timeout = timeout;
549
550 /* Timeout is in ticks. Let's figure out how many chars we
551 * can receive at the current baud rate in that interval
552 * and set the rx threshold to that amount. There are 4 chars
553 * per ring entry, so we'll divide the number of chars that will
554 * arrive in timeout by 4.
555 * So .... timeout * baud / 10 / HZ / 4, with HZ = 100.
556 */
557 threshold = timeout * port->ip_baud / 4000;
558 if (threshold == 0)
559 threshold = 1; /* otherwise we'll intr all the time! */
560
561 if ((unsigned)threshold > (unsigned)SSCR_RX_THRESHOLD)
562 return 1;
563
564 port->ip_sscr &= ~SSCR_RX_THRESHOLD;
565 port->ip_sscr |= threshold;
566 writel(port->ip_sscr, &port->ip_serial_regs->sscr);
567
568 /* Now set the rx timeout to the given value
569 * again timeout * SRTR_HZ / HZ
570 */
571 timeout = timeout * SRTR_HZ / 100;
572 if (timeout > SRTR_CNT)
573 timeout = SRTR_CNT;
574 writel(timeout, &port->ip_serial_regs->srtr);
575 return 0;
576}
577
578/**
579 * config_port - config the hardware
580 * @port: port to config
581 * @baud: baud rate for the port
582 * @byte_size: data size
583 * @stop_bits: number of stop bits
584 * @parenb: parity enable ?
585 * @parodd: odd parity ?
586 */
587static inline int
588config_port(struct ioc3_port *port,
589 int baud, int byte_size, int stop_bits, int parenb, int parodd)
590{
591 char lcr, sizebits;
592 int spiniter = 0;
593
594 DPRINT_CONFIG(("%s: line %d baud %d byte_size %d stop %d parenb %d "
595 "parodd %d\n",
596 __FUNCTION__, ((struct uart_port *)port->ip_port)->line,
597 baud, byte_size, stop_bits, parenb, parodd));
598
599 if (set_baud(port, baud))
600 return 1;
601
602 switch (byte_size) {
603 case 5:
604 sizebits = UART_LCR_WLEN5;
605 break;
606 case 6:
607 sizebits = UART_LCR_WLEN6;
608 break;
609 case 7:
610 sizebits = UART_LCR_WLEN7;
611 break;
612 case 8:
613 sizebits = UART_LCR_WLEN8;
614 break;
615 default:
616 return 1;
617 }
618
619 /* Pause the DMA interface if necessary */
620 if (port->ip_sscr & SSCR_DMA_EN) {
621 writel(port->ip_sscr | SSCR_DMA_PAUSE,
622 &port->ip_serial_regs->sscr);
623 while ((readl(&port->ip_serial_regs->sscr)
624 & SSCR_PAUSE_STATE) == 0) {
625 spiniter++;
626 if (spiniter > MAXITER)
627 return -1;
628 }
629 }
630
631 /* Clear relevant fields in lcr */
632 lcr = readb(&port->ip_uart_regs->iu_lcr);
633 lcr &= ~(LCR_MASK_BITS_CHAR | UART_LCR_EPAR |
634 UART_LCR_PARITY | LCR_MASK_STOP_BITS);
635
636 /* Set byte size in lcr */
637 lcr |= sizebits;
638
639 /* Set parity */
640 if (parenb) {
641 lcr |= UART_LCR_PARITY;
642 if (!parodd)
643 lcr |= UART_LCR_EPAR;
644 }
645
646 /* Set stop bits */
647 if (stop_bits)
648 lcr |= UART_LCR_STOP /* 2 stop bits */ ;
649
650 writeb(lcr, &port->ip_uart_regs->iu_lcr);
651
652 /* Re-enable the DMA interface if necessary */
653 if (port->ip_sscr & SSCR_DMA_EN) {
654 writel(port->ip_sscr, &port->ip_serial_regs->sscr);
655 }
656 port->ip_baud = baud;
657
658 /* When we get within this number of ring entries of filling the
659 * entire ring on tx, place an EXPLICIT intr to generate a lowat
660 * notification when output has drained.
661 */
662 port->ip_tx_lowat = (TX_LOWAT_CHARS(baud) + 3) / 4;
663 if (port->ip_tx_lowat == 0)
664 port->ip_tx_lowat = 1;
665
666 set_rx_timeout(port, 2);
667 return 0;
668}
669
670/**
671 * do_write - Write bytes to the port. Returns the number of bytes
672 * actually written. Called from transmit_chars
673 * @port: port to use
674 * @buf: the stuff to write
675 * @len: how many bytes in 'buf'
676 */
677static inline int do_write(struct ioc3_port *port, char *buf, int len)
678{
679 int prod_ptr, cons_ptr, total = 0;
680 struct ring *outring;
681 struct ring_entry *entry;
682 struct port_hooks *hooks = port->ip_hooks;
683
684 BUG_ON(!(len >= 0));
685
686 prod_ptr = port->ip_tx_prod;
687 cons_ptr = readl(&port->ip_serial_regs->stcir) & PROD_CONS_MASK;
688 outring = port->ip_outring;
689
690 /* Maintain a 1-entry red-zone. The ring buffer is full when
691 * (cons - prod) % ring_size is 1. Rather than do this subtraction
692 * in the body of the loop, I'll do it now.
693 */
694 cons_ptr = (cons_ptr - (int)sizeof(struct ring_entry)) & PROD_CONS_MASK;
695
696 /* Stuff the bytes into the output */
697 while ((prod_ptr != cons_ptr) && (len > 0)) {
698 int xx;
699
700 /* Get 4 bytes (one ring entry) at a time */
701 entry = (struct ring_entry *)((caddr_t) outring + prod_ptr);
702
703 /* Invalidate all entries */
704 entry->ring_allsc = 0;
705
706 /* Copy in some bytes */
707 for (xx = 0; (xx < 4) && (len > 0); xx++) {
708 entry->ring_data[xx] = *buf++;
709 entry->ring_sc[xx] = TXCB_VALID;
710 len--;
711 total++;
712 }
713
714 /* If we are within some small threshold of filling up the
715 * entire ring buffer, we must place an EXPLICIT intr here
716 * to generate a lowat interrupt in case we subsequently
717 * really do fill up the ring and the caller goes to sleep.
718 * No need to place more than one though.
719 */
720 if (!(port->ip_flags & LOWAT_WRITTEN) &&
721 ((cons_ptr - prod_ptr) & PROD_CONS_MASK)
722 <= port->ip_tx_lowat * (int)sizeof(struct ring_entry)) {
723 port->ip_flags |= LOWAT_WRITTEN;
724 entry->ring_sc[0] |= TXCB_INT_WHEN_DONE;
725 }
726
727 /* Go on to next entry */
728 prod_ptr += sizeof(struct ring_entry);
729 prod_ptr &= PROD_CONS_MASK;
730 }
731
732 /* If we sent something, start DMA if necessary */
733 if (total > 0 && !(port->ip_sscr & SSCR_DMA_EN)) {
734 port->ip_sscr |= SSCR_DMA_EN;
735 writel(port->ip_sscr, &port->ip_serial_regs->sscr);
736 }
737
738 /* Store the new producer pointer. If tx is disabled, we stuff the
739 * data into the ring buffer, but we don't actually start tx.
740 */
741 if (!uart_tx_stopped(port->ip_port)) {
742 writel(prod_ptr, &port->ip_serial_regs->stpir);
743
744 /* If we are now transmitting, enable tx_mt interrupt so we
745 * can disable DMA if necessary when the tx finishes.
746 */
747 if (total > 0)
748 enable_intrs(port, hooks->intr_tx_mt);
749 }
750 port->ip_tx_prod = prod_ptr;
751
752 return total;
753}
754
755/**
756 * disable_intrs - disable interrupts
757 * @port: port to enable
758 * @mask: mask to use
759 */
760static inline void disable_intrs(struct ioc3_port *port, uint32_t mask)
761{
762 if (port->ip_card->ic_enable & mask) {
763 ioc3_disable(port->ip_is, port->ip_idd, mask);
764 port->ip_card->ic_enable &= ~mask;
765 }
766}
767
768/**
769 * set_notification - Modify event notification
770 * @port: port to use
771 * @mask: events mask
772 * @set_on: set ?
773 */
774static int set_notification(struct ioc3_port *port, int mask, int set_on)
775{
776 struct port_hooks *hooks = port->ip_hooks;
777 uint32_t intrbits, sscrbits;
778
779 BUG_ON(!mask);
780
781 intrbits = sscrbits = 0;
782
783 if (mask & N_DATA_READY)
784 intrbits |= (hooks->intr_rx_timer | hooks->intr_rx_high);
785 if (mask & N_OUTPUT_LOWAT)
786 intrbits |= hooks->intr_tx_explicit;
787 if (mask & N_DDCD) {
788 intrbits |= hooks->intr_delta_dcd;
789 sscrbits |= SSCR_RX_RING_DCD;
790 }
791 if (mask & N_DCTS)
792 intrbits |= hooks->intr_delta_cts;
793
794 if (set_on) {
795 enable_intrs(port, intrbits);
796 port->ip_notify |= mask;
797 port->ip_sscr |= sscrbits;
798 } else {
799 disable_intrs(port, intrbits);
800 port->ip_notify &= ~mask;
801 port->ip_sscr &= ~sscrbits;
802 }
803
804 /* We require DMA if either DATA_READY or DDCD notification is
805 * currently requested. If neither of these is requested and
806 * there is currently no tx in progress, DMA may be disabled.
807 */
808 if (port->ip_notify & (N_DATA_READY | N_DDCD))
809 port->ip_sscr |= SSCR_DMA_EN;
810 else if (!(port->ip_card->ic_enable & hooks->intr_tx_mt))
811 port->ip_sscr &= ~SSCR_DMA_EN;
812
813 writel(port->ip_sscr, &port->ip_serial_regs->sscr);
814 return 0;
815}
816
817/**
818 * set_mcr - set the master control reg
819 * @the_port: port to use
820 * @mask1: mcr mask
821 * @mask2: shadow mask
822 */
823static inline int set_mcr(struct uart_port *the_port,
824 int mask1, int mask2)
825{
826 struct ioc3_port *port = get_ioc3_port(the_port);
827 uint32_t shadow;
828 int spiniter = 0;
829 char mcr;
830
831 if (!port)
832 return -1;
833
834 /* Pause the DMA interface if necessary */
835 if (port->ip_sscr & SSCR_DMA_EN) {
836 writel(port->ip_sscr | SSCR_DMA_PAUSE,
837 &port->ip_serial_regs->sscr);
838 while ((readl(&port->ip_serial_regs->sscr)
839 & SSCR_PAUSE_STATE) == 0) {
840 spiniter++;
841 if (spiniter > MAXITER)
842 return -1;
843 }
844 }
845 shadow = readl(&port->ip_serial_regs->shadow);
846 mcr = (shadow & 0xff000000) >> 24;
847
848 /* Set new value */
849 mcr |= mask1;
850 shadow |= mask2;
851 writeb(mcr, &port->ip_uart_regs->iu_mcr);
852 writel(shadow, &port->ip_serial_regs->shadow);
853
854 /* Re-enable the DMA interface if necessary */
855 if (port->ip_sscr & SSCR_DMA_EN) {
856 writel(port->ip_sscr, &port->ip_serial_regs->sscr);
857 }
858 return 0;
859}
860
861/**
862 * ioc3_set_proto - set the protocol for the port
863 * @port: port to use
864 * @proto: protocol to use
865 */
866static int ioc3_set_proto(struct ioc3_port *port, int proto)
867{
868 struct port_hooks *hooks = port->ip_hooks;
869
870 switch (proto) {
871 default:
872 case PROTO_RS232:
873 /* Clear the appropriate GIO pin */
874 DPRINT_CONFIG(("%s: rs232\n", __FUNCTION__));
875 writel(0, (&port->ip_idd->vma->gppr[0]
876 + hooks->rs422_select_pin));
877 break;
878
879 case PROTO_RS422:
880 /* Set the appropriate GIO pin */
881 DPRINT_CONFIG(("%s: rs422\n", __FUNCTION__));
882 writel(1, (&port->ip_idd->vma->gppr[0]
883 + hooks->rs422_select_pin));
884 break;
885 }
886 return 0;
887}
888
889/**
890 * transmit_chars - upper level write, called with the_port->lock
891 * @the_port: port to write
892 */
893static void transmit_chars(struct uart_port *the_port)
894{
895 int xmit_count, tail, head;
896 int result;
897 char *start;
898 struct tty_struct *tty;
899 struct ioc3_port *port = get_ioc3_port(the_port);
900 struct uart_info *info;
901
902 if (!the_port)
903 return;
904 if (!port)
905 return;
906
907 info = the_port->info;
908 tty = info->tty;
909
910 if (uart_circ_empty(&info->xmit) || uart_tx_stopped(the_port)) {
911 /* Nothing to do or hw stopped */
912 set_notification(port, N_ALL_OUTPUT, 0);
913 return;
914 }
915
916 head = info->xmit.head;
917 tail = info->xmit.tail;
918 start = (char *)&info->xmit.buf[tail];
919
920 /* write out all the data or until the end of the buffer */
921 xmit_count = (head < tail) ? (UART_XMIT_SIZE - tail) : (head - tail);
922 if (xmit_count > 0) {
923 result = do_write(port, start, xmit_count);
924 if (result > 0) {
925 /* booking */
926 xmit_count -= result;
927 the_port->icount.tx += result;
928 /* advance the pointers */
929 tail += result;
930 tail &= UART_XMIT_SIZE - 1;
931 info->xmit.tail = tail;
932 start = (char *)&info->xmit.buf[tail];
933 }
934 }
935 if (uart_circ_chars_pending(&info->xmit) < WAKEUP_CHARS)
936 uart_write_wakeup(the_port);
937
938 if (uart_circ_empty(&info->xmit)) {
939 set_notification(port, N_OUTPUT_LOWAT, 0);
940 } else {
941 set_notification(port, N_OUTPUT_LOWAT, 1);
942 }
943}
944
945/**
946 * ioc3_change_speed - change the speed of the port
947 * @the_port: port to change
948 * @new_termios: new termios settings
949 * @old_termios: old termios settings
950 */
951static void
952ioc3_change_speed(struct uart_port *the_port,
953 struct termios *new_termios, struct termios *old_termios)
954{
955 struct ioc3_port *port = get_ioc3_port(the_port);
956 unsigned int cflag;
957 int baud;
958 int new_parity = 0, new_parity_enable = 0, new_stop = 0, new_data = 8;
959 struct uart_info *info = the_port->info;
960
961 cflag = new_termios->c_cflag;
962
963 switch (cflag & CSIZE) {
964 case CS5:
965 new_data = 5;
966 break;
967 case CS6:
968 new_data = 6;
969 break;
970 case CS7:
971 new_data = 7;
972 break;
973 case CS8:
974 new_data = 8;
975 break;
976 default:
977 /* cuz we always need a default ... */
978 new_data = 5;
979 break;
980 }
981 if (cflag & CSTOPB) {
982 new_stop = 1;
983 }
984 if (cflag & PARENB) {
985 new_parity_enable = 1;
986 if (cflag & PARODD)
987 new_parity = 1;
988 }
989 baud = uart_get_baud_rate(the_port, new_termios, old_termios,
990 MIN_BAUD_SUPPORTED, MAX_BAUD_SUPPORTED);
991 DPRINT_CONFIG(("%s: returned baud %d for line %d\n", __FUNCTION__, baud,
992 the_port->line));
993
994 if (!the_port->fifosize)
995 the_port->fifosize = FIFO_SIZE;
996 uart_update_timeout(the_port, cflag, baud);
997
998 the_port->ignore_status_mask = N_ALL_INPUT;
999
1000 info->tty->low_latency = 1;
1001
1002 if (I_IGNPAR(info->tty))
1003 the_port->ignore_status_mask &= ~(N_PARITY_ERROR
1004 | N_FRAMING_ERROR);
1005 if (I_IGNBRK(info->tty)) {
1006 the_port->ignore_status_mask &= ~N_BREAK;
1007 if (I_IGNPAR(info->tty))
1008 the_port->ignore_status_mask &= ~N_OVERRUN_ERROR;
1009 }
1010 if (!(cflag & CREAD)) {
1011 /* ignore everything */
1012 the_port->ignore_status_mask &= ~N_DATA_READY;
1013 }
1014
1015 if (cflag & CRTSCTS) {
1016 /* enable hardware flow control */
1017 port->ip_sscr |= SSCR_HFC_EN;
1018 }
1019 else {
1020 /* disable hardware flow control */
1021 port->ip_sscr &= ~SSCR_HFC_EN;
1022 }
1023 writel(port->ip_sscr, &port->ip_serial_regs->sscr);
1024
1025 /* Set the configuration and proper notification call */
1026 DPRINT_CONFIG(("%s : port 0x%p line %d cflag 0%o "
1027 "config_port(baud %d data %d stop %d penable %d "
1028 " parity %d), notification 0x%x\n",
1029 __FUNCTION__, (void *)port, the_port->line, cflag, baud,
1030 new_data, new_stop, new_parity_enable, new_parity,
1031 the_port->ignore_status_mask));
1032
1033 if ((config_port(port, baud, /* baud */
1034 new_data, /* byte size */
1035 new_stop, /* stop bits */
1036 new_parity_enable, /* set parity */
1037 new_parity)) >= 0) { /* parity 1==odd */
1038 set_notification(port, the_port->ignore_status_mask, 1);
1039 }
1040}
1041
1042/**
1043 * ic3_startup_local - Start up the serial port - returns >= 0 if no errors
1044 * @the_port: Port to operate on
1045 */
1046static inline int ic3_startup_local(struct uart_port *the_port)
1047{
1048 struct ioc3_port *port;
1049
1050 if (!the_port) {
1051 NOT_PROGRESS();
1052 return -1;
1053 }
1054
1055 port = get_ioc3_port(the_port);
1056 if (!port) {
1057 NOT_PROGRESS();
1058 return -1;
1059 }
1060
1061 local_open(port);
1062
1063 /* set the protocol */
1064 ioc3_set_proto(port, IS_RS232(the_port->line) ? PROTO_RS232 :
1065 PROTO_RS422);
1066 return 0;
1067}
1068
1069/*
1070 * ioc3_cb_output_lowat - called when the output low water mark is hit
1071 * @port: port to output
1072 */
1073static void ioc3_cb_output_lowat(struct ioc3_port *port)
1074{
1075 unsigned long pflags;
1076
1077 /* the_port->lock is set on the call here */
1078 if (port->ip_port) {
1079 spin_lock_irqsave(&port->ip_port->lock, pflags);
1080 transmit_chars(port->ip_port);
1081 spin_unlock_irqrestore(&port->ip_port->lock, pflags);
1082 }
1083}
1084
1085/*
1086 * ioc3_cb_post_ncs - called for some basic errors
1087 * @port: port to use
1088 * @ncs: event
1089 */
1090static void ioc3_cb_post_ncs(struct uart_port *the_port, int ncs)
1091{
1092 struct uart_icount *icount;
1093
1094 icount = &the_port->icount;
1095
1096 if (ncs & NCS_BREAK)
1097 icount->brk++;
1098 if (ncs & NCS_FRAMING)
1099 icount->frame++;
1100 if (ncs & NCS_OVERRUN)
1101 icount->overrun++;
1102 if (ncs & NCS_PARITY)
1103 icount->parity++;
1104}
1105
1106/**
1107 * do_read - Read in bytes from the port. Return the number of bytes
1108 * actually read.
1109 * @the_port: port to use
1110 * @buf: place to put the stuff we read
1111 * @len: how big 'buf' is
1112 */
1113
1114static inline int do_read(struct uart_port *the_port, char *buf, int len)
1115{
1116 int prod_ptr, cons_ptr, total;
1117 struct ioc3_port *port = get_ioc3_port(the_port);
1118 struct ring *inring;
1119 struct ring_entry *entry;
1120 struct port_hooks *hooks = port->ip_hooks;
1121 int byte_num;
1122 char *sc;
1123 int loop_counter;
1124
1125 BUG_ON(!(len >= 0));
1126 BUG_ON(!port);
1127
1128 /* There is a nasty timing issue in the IOC3. When the rx_timer
1129 * expires or the rx_high condition arises, we take an interrupt.
1130 * At some point while servicing the interrupt, we read bytes from
1131 * the ring buffer and re-arm the rx_timer. However the rx_timer is
1132 * not started until the first byte is received *after* it is armed,
1133 * and any bytes pending in the rx construction buffers are not drained
1134 * to memory until either there are 4 bytes available or the rx_timer
1135 * expires. This leads to a potential situation where data is left
1136 * in the construction buffers forever - 1 to 3 bytes were received
1137 * after the interrupt was generated but before the rx_timer was
1138 * re-armed. At that point as long as no subsequent bytes are received
1139 * the timer will never be started and the bytes will remain in the
1140 * construction buffer forever. The solution is to execute a DRAIN
1141 * command after rearming the timer. This way any bytes received before
1142 * the DRAIN will be drained to memory, and any bytes received after
1143 * the DRAIN will start the TIMER and be drained when it expires.
1144 * Luckily, this only needs to be done when the DMA buffer is empty
1145 * since there is no requirement that this function return all
1146 * available data as long as it returns some.
1147 */
1148 /* Re-arm the timer */
1149
1150 writel(port->ip_rx_cons | SRCIR_ARM, &port->ip_serial_regs->srcir);
1151
1152 prod_ptr = readl(&port->ip_serial_regs->srpir) & PROD_CONS_MASK;
1153 cons_ptr = port->ip_rx_cons;
1154
1155 if (prod_ptr == cons_ptr) {
1156 int reset_dma = 0;
1157
1158 /* Input buffer appears empty, do a flush. */
1159
1160 /* DMA must be enabled for this to work. */
1161 if (!(port->ip_sscr & SSCR_DMA_EN)) {
1162 port->ip_sscr |= SSCR_DMA_EN;
1163 reset_dma = 1;
1164 }
1165
1166 /* Potential race condition: we must reload the srpir after
1167 * issuing the drain command, otherwise we could think the rx
1168 * buffer is empty, then take a very long interrupt, and when
1169 * we come back it's full and we wait forever for the drain to
1170 * complete.
1171 */
1172 writel(port->ip_sscr | SSCR_RX_DRAIN,
1173 &port->ip_serial_regs->sscr);
1174 prod_ptr = readl(&port->ip_serial_regs->srpir) & PROD_CONS_MASK;
1175
1176 /* We must not wait for the DRAIN to complete unless there are
1177 * at least 8 bytes (2 ring entries) available to receive the
1178 * data otherwise the DRAIN will never complete and we'll
1179 * deadlock here.
1180 * In fact, to make things easier, I'll just ignore the flush if
1181 * there is any data at all now available.
1182 */
1183 if (prod_ptr == cons_ptr) {
1184 loop_counter = 0;
1185 while (readl(&port->ip_serial_regs->sscr) &
1186 SSCR_RX_DRAIN) {
1187 loop_counter++;
1188 if (loop_counter > MAXITER)
1189 return -1;
1190 }
1191
1192 /* SIGH. We have to reload the prod_ptr *again* since
1193 * the drain may have caused it to change
1194 */
1195 prod_ptr = readl(&port->ip_serial_regs->srpir)
1196 & PROD_CONS_MASK;
1197 }
1198 if (reset_dma) {
1199 port->ip_sscr &= ~SSCR_DMA_EN;
1200 writel(port->ip_sscr, &port->ip_serial_regs->sscr);
1201 }
1202 }
1203 inring = port->ip_inring;
1204 port->ip_flags &= ~READ_ABORTED;
1205
1206 total = 0;
1207 loop_counter = 0xfffff; /* to avoid hangs */
1208
1209 /* Grab bytes from the hardware */
1210 while ((prod_ptr != cons_ptr) && (len > 0)) {
1211 entry = (struct ring_entry *)((caddr_t) inring + cons_ptr);
1212
1213 if (loop_counter-- <= 0) {
1214 printk(KERN_WARNING "IOC3 serial: "
1215 "possible hang condition/"
1216 "port stuck on read (line %d).\n",
1217 the_port->line);
1218 break;
1219 }
1220
1221 /* According to the producer pointer, this ring entry
1222 * must contain some data. But if the PIO happened faster
1223 * than the DMA, the data may not be available yet, so let's
1224 * wait until it arrives.
1225 */
1226 if ((entry->ring_allsc & RING_ANY_VALID) == 0) {
1227 /* Indicate the read is aborted so we don't disable
1228 * the interrupt thinking that the consumer is
1229 * congested.
1230 */
1231 port->ip_flags |= READ_ABORTED;
1232 len = 0;
1233 break;
1234 }
1235
1236 /* Load the bytes/status out of the ring entry */
1237 for (byte_num = 0; byte_num < 4 && len > 0; byte_num++) {
1238 sc = &(entry->ring_sc[byte_num]);
1239
1240 /* Check for change in modem state or overrun */
1241 if ((*sc & RXSB_MODEM_VALID)
1242 && (port->ip_notify & N_DDCD)) {
1243 /* Notify upper layer if DCD dropped */
1244 if ((port->ip_flags & DCD_ON)
1245 && !(*sc & RXSB_DCD)) {
1246 /* If we have already copied some data,
1247 * return it. We'll pick up the carrier
1248 * drop on the next pass. That way we
1249 * don't throw away the data that has
1250 * already been copied back to
1251 * the caller's buffer.
1252 */
1253 if (total > 0) {
1254 len = 0;
1255 break;
1256 }
1257 port->ip_flags &= ~DCD_ON;
1258
1259 /* Turn off this notification so the
1260 * carrier drop protocol won't see it
1261 * again when it does a read.
1262 */
1263 *sc &= ~RXSB_MODEM_VALID;
1264
1265 /* To keep things consistent, we need
1266 * to update the consumer pointer so
1267 * the next reader won't come in and
1268 * try to read the same ring entries
1269 * again. This must be done here before
1270 * the dcd change.
1271 */
1272
1273 if ((entry->ring_allsc & RING_ANY_VALID)
1274 == 0) {
1275 cons_ptr += (int)sizeof
1276 (struct ring_entry);
1277 cons_ptr &= PROD_CONS_MASK;
1278 }
1279 writel(cons_ptr,
1280 &port->ip_serial_regs->srcir);
1281 port->ip_rx_cons = cons_ptr;
1282
1283 /* Notify upper layer of carrier drop */
1284 if ((port->ip_notify & N_DDCD)
1285 && port->ip_port) {
1286 uart_handle_dcd_change
1287 (port->ip_port, 0);
1288 wake_up_interruptible
1289 (&the_port->info->
1290 delta_msr_wait);
1291 }
1292
1293 /* If we had any data to return, we
1294 * would have returned it above.
1295 */
1296 return 0;
1297 }
1298 }
1299 if (*sc & RXSB_MODEM_VALID) {
1300 /* Notify that an input overrun occurred */
1301 if ((*sc & RXSB_OVERRUN)
1302 && (port->ip_notify & N_OVERRUN_ERROR)) {
1303 ioc3_cb_post_ncs(the_port, NCS_OVERRUN);
1304 }
1305 /* Don't look at this byte again */
1306 *sc &= ~RXSB_MODEM_VALID;
1307 }
1308
1309 /* Check for valid data or RX errors */
1310 if ((*sc & RXSB_DATA_VALID) &&
1311 ((*sc & (RXSB_PAR_ERR
1312 | RXSB_FRAME_ERR | RXSB_BREAK))
1313 && (port->ip_notify & (N_PARITY_ERROR
1314 | N_FRAMING_ERROR
1315 | N_BREAK)))) {
1316 /* There is an error condition on the next byte.
1317 * If we have already transferred some bytes,
1318 * we'll stop here. Otherwise if this is the
1319 * first byte to be read, we'll just transfer
1320 * it alone after notifying the
1321 * upper layer of its status.
1322 */
1323 if (total > 0) {
1324 len = 0;
1325 break;
1326 } else {
1327 if ((*sc & RXSB_PAR_ERR) &&
1328 (port->
1329 ip_notify & N_PARITY_ERROR)) {
1330 ioc3_cb_post_ncs(the_port,
1331 NCS_PARITY);
1332 }
1333 if ((*sc & RXSB_FRAME_ERR) &&
1334 (port->
1335 ip_notify & N_FRAMING_ERROR)) {
1336 ioc3_cb_post_ncs(the_port,
1337 NCS_FRAMING);
1338 }
1339 if ((*sc & RXSB_BREAK)
1340 && (port->ip_notify & N_BREAK)) {
1341 ioc3_cb_post_ncs
1342 (the_port, NCS_BREAK);
1343 }
1344 len = 1;
1345 }
1346 }
1347 if (*sc & RXSB_DATA_VALID) {
1348 *sc &= ~RXSB_DATA_VALID;
1349 *buf = entry->ring_data[byte_num];
1350 buf++;
1351 len--;
1352 total++;
1353 }
1354 }
1355
1356 /* If we used up this entry entirely, go on to the next one,
1357 * otherwise we must have run out of buffer space, so
1358 * leave the consumer pointer here for the next read in case
1359 * there are still unread bytes in this entry.
1360 */
1361 if ((entry->ring_allsc & RING_ANY_VALID) == 0) {
1362 cons_ptr += (int)sizeof(struct ring_entry);
1363 cons_ptr &= PROD_CONS_MASK;
1364 }
1365 }
1366
1367 /* Update consumer pointer and re-arm rx timer interrupt */
1368 writel(cons_ptr, &port->ip_serial_regs->srcir);
1369 port->ip_rx_cons = cons_ptr;
1370
1371 /* If we have now dipped below the rx high water mark and we have
1372 * rx_high interrupt turned off, we can now turn it back on again.
1373 */
1374 if ((port->ip_flags & INPUT_HIGH) && (((prod_ptr - cons_ptr)
1375 & PROD_CONS_MASK) <
1376 ((port->
1377 ip_sscr &
1378 SSCR_RX_THRESHOLD)
1379 << PROD_CONS_PTR_OFF))) {
1380 port->ip_flags &= ~INPUT_HIGH;
1381 enable_intrs(port, hooks->intr_rx_high);
1382 }
1383 return total;
1384}
1385
1386/**
1387 * receive_chars - upper level read.
1388 * @the_port: port to read from
1389 */
1390static int receive_chars(struct uart_port *the_port)
1391{
1392 struct tty_struct *tty;
1393 unsigned char ch[MAX_CHARS];
1394 int read_count = 0, read_room, flip = 0;
1395 struct uart_info *info = the_port->info;
1396 struct ioc3_port *port = get_ioc3_port(the_port);
1397 unsigned long pflags;
1398
1399 /* Make sure all the pointers are "good" ones */
1400 if (!info)
1401 return 0;
1402 if (!info->tty)
1403 return 0;
1404
1405 if (!(port->ip_flags & INPUT_ENABLE))
1406 return 0;
1407
1408 spin_lock_irqsave(&the_port->lock, pflags);
1409 tty = info->tty;
1410
1411 read_count = do_read(the_port, ch, MAX_CHARS);
1412 if (read_count > 0) {
1413 flip = 1;
1414 read_room = tty_buffer_request_room(tty, read_count);
1415 tty_insert_flip_string(tty, ch, read_room);
1416 the_port->icount.rx += read_count;
1417 }
1418 spin_unlock_irqrestore(&the_port->lock, pflags);
1419
1420 if (flip)
1421 tty_flip_buffer_push(tty);
1422
1423 return read_count;
1424}
1425
1426/**
1427 * ioc3uart_intr_one - lowest level (per port) interrupt handler.
1428 * @is : submodule
1429 * @idd: driver data
1430 * @pending: interrupts to handle
1431 * @regs: pt_regs
1432 */
1433
1434static int inline
1435ioc3uart_intr_one(struct ioc3_submodule *is,
1436 struct ioc3_driver_data *idd,
1437 unsigned int pending, struct pt_regs *regs)
1438{
1439 int port_num = GET_PORT_FROM_SIO_IR(pending);
1440 struct port_hooks *hooks;
1441 unsigned int rx_high_rd_aborted = 0;
1442 unsigned long flags;
1443 struct uart_port *the_port;
1444 struct ioc3_port *port;
1445 int loop_counter;
1446 struct ioc3_card *card_ptr;
1447 unsigned int sio_ir;
1448
1449 card_ptr = idd->data[is->id];
1450 port = card_ptr->ic_port[port_num].icp_port;
1451 hooks = port->ip_hooks;
1452
1453 /* Possible race condition here: The tx_mt interrupt bit may be
1454 * cleared without the intervention of the interrupt handler,
1455 * e.g. by a write. If the top level interrupt handler reads a
1456 * tx_mt, then some other processor does a write, starting up
1457 * output, then we come in here, see the tx_mt and stop DMA, the
1458 * output started by the other processor will hang. Thus we can
1459 * only rely on tx_mt being legitimate if it is read while the
1460 * port lock is held. Therefore this bit must be ignored in the
1461 * passed in interrupt mask which was read by the top level
1462 * interrupt handler since the port lock was not held at the time
1463 * it was read. We can only rely on this bit being accurate if it
1464 * is read while the port lock is held. So we'll clear it for now,
1465 * and reload it later once we have the port lock.
1466 */
1467
1468 sio_ir = pending & ~(hooks->intr_tx_mt);
1469 spin_lock_irqsave(&port->ip_lock, flags);
1470
1471 loop_counter = MAXITER; /* to avoid hangs */
1472
1473 do {
1474 uint32_t shadow;
1475
1476 if (loop_counter-- <= 0) {
1477 printk(KERN_WARNING "IOC3 serial: "
1478 "possible hang condition/"
1479 "port stuck on interrupt (line %d).\n",
1480 ((struct uart_port *)port->ip_port)->line);
1481 break;
1482 }
1483 /* Handle a DCD change */
1484 if (sio_ir & hooks->intr_delta_dcd) {
1485 ioc3_ack(is, idd, hooks->intr_delta_dcd);
1486 shadow = readl(&port->ip_serial_regs->shadow);
1487
1488 if ((port->ip_notify & N_DDCD)
1489 && (shadow & SHADOW_DCD)
1490 && (port->ip_port)) {
1491 the_port = port->ip_port;
1492 uart_handle_dcd_change(the_port,
1493 shadow & SHADOW_DCD);
1494 wake_up_interruptible
1495 (&the_port->info->delta_msr_wait);
1496 } else if ((port->ip_notify & N_DDCD)
1497 && !(shadow & SHADOW_DCD)) {
1498 /* Flag delta DCD/no DCD */
1499 uart_handle_dcd_change(port->ip_port,
1500 shadow & SHADOW_DCD);
1501 port->ip_flags |= DCD_ON;
1502 }
1503 }
1504
1505 /* Handle a CTS change */
1506 if (sio_ir & hooks->intr_delta_cts) {
1507 ioc3_ack(is, idd, hooks->intr_delta_cts);
1508 shadow = readl(&port->ip_serial_regs->shadow);
1509
1510 if ((port->ip_notify & N_DCTS) && (port->ip_port)) {
1511 the_port = port->ip_port;
1512 uart_handle_cts_change(the_port, shadow
1513 & SHADOW_CTS);
1514 wake_up_interruptible
1515 (&the_port->info->delta_msr_wait);
1516 }
1517 }
1518
1519 /* rx timeout interrupt. Must be some data available. Put this
1520 * before the check for rx_high since servicing this condition
1521 * may cause that condition to clear.
1522 */
1523 if (sio_ir & hooks->intr_rx_timer) {
1524 ioc3_ack(is, idd, hooks->intr_rx_timer);
1525 if ((port->ip_notify & N_DATA_READY)
1526 && (port->ip_port)) {
1527 receive_chars(port->ip_port);
1528 }
1529 }
1530
1531 /* rx high interrupt. Must be after rx_timer. */
1532 else if (sio_ir & hooks->intr_rx_high) {
1533 /* Data available, notify upper layer */
1534 if ((port->ip_notify & N_DATA_READY) && port->ip_port) {
1535 receive_chars(port->ip_port);
1536 }
1537
1538 /* We can't ACK this interrupt. If receive_chars didn't
1539 * cause the condition to clear, we'll have to disable
1540 * the interrupt until the data is drained.
1541 * If the read was aborted, don't disable the interrupt
1542 * as this may cause us to hang indefinitely. An
1543 * aborted read generally means that this interrupt
1544 * hasn't been delivered to the cpu yet anyway, even
1545 * though we see it as asserted when we read the sio_ir.
1546 */
1547 if ((sio_ir = PENDING(card_ptr, idd))
1548 & hooks->intr_rx_high) {
1549 if (port->ip_flags & READ_ABORTED) {
1550 rx_high_rd_aborted++;
1551 }
1552 else {
1553 card_ptr->ic_enable &= ~hooks->intr_rx_high;
1554 port->ip_flags |= INPUT_HIGH;
1555 }
1556 }
1557 }
1558
1559 /* We got a low water interrupt: notify upper layer to
1560 * send more data. Must come before tx_mt since servicing
1561 * this condition may cause that condition to clear.
1562 */
1563 if (sio_ir & hooks->intr_tx_explicit) {
1564 port->ip_flags &= ~LOWAT_WRITTEN;
1565 ioc3_ack(is, idd, hooks->intr_tx_explicit);
1566 if (port->ip_notify & N_OUTPUT_LOWAT)
1567 ioc3_cb_output_lowat(port);
1568 }
1569
1570 /* Handle tx_mt. Must come after tx_explicit. */
1571 else if (sio_ir & hooks->intr_tx_mt) {
1572 /* If we are expecting a lowat notification
1573 * and we get to this point it probably means that for
1574 * some reason the tx_explicit didn't work as expected
1575 * (that can legitimately happen if the output buffer is
1576 * filled up in just the right way).
1577 * So send the notification now.
1578 */
1579 if (port->ip_notify & N_OUTPUT_LOWAT) {
1580 ioc3_cb_output_lowat(port);
1581
1582 /* We need to reload the sio_ir since the lowat
1583 * call may have caused another write to occur,
1584 * clearing the tx_mt condition.
1585 */
1586 sio_ir = PENDING(card_ptr, idd);
1587 }
1588
1589 /* If the tx_mt condition still persists even after the
1590 * lowat call, we've got some work to do.
1591 */
1592 if (sio_ir & hooks->intr_tx_mt) {
1593 /* If we are not currently expecting DMA input,
1594 * and the transmitter has just gone idle,
1595 * there is no longer any reason for DMA, so
1596 * disable it.
1597 */
1598 if (!(port->ip_notify
1599 & (N_DATA_READY | N_DDCD))) {
1600 BUG_ON(!(port->ip_sscr
1601 & SSCR_DMA_EN));
1602 port->ip_sscr &= ~SSCR_DMA_EN;
1603 writel(port->ip_sscr,
1604 &port->ip_serial_regs->sscr);
1605 }
1606 /* Prevent infinite tx_mt interrupt */
1607 card_ptr->ic_enable &= ~hooks->intr_tx_mt;
1608 }
1609 }
1610 sio_ir = PENDING(card_ptr, idd);
1611
1612 /* if the read was aborted and only hooks->intr_rx_high,
1613 * clear hooks->intr_rx_high, so we do not loop forever.
1614 */
1615
1616 if (rx_high_rd_aborted && (sio_ir == hooks->intr_rx_high)) {
1617 sio_ir &= ~hooks->intr_rx_high;
1618 }
1619 } while (sio_ir & hooks->intr_all);
1620
1621 spin_unlock_irqrestore(&port->ip_lock, flags);
1622 ioc3_enable(is, idd, card_ptr->ic_enable);
1623 return 0;
1624}
1625
1626/**
1627 * ioc3uart_intr - field all serial interrupts
1628 * @is : submodule
1629 * @idd: driver data
1630 * @pending: interrupts to handle
1631 * @regs: pt_regs
1632 *
1633 */
1634
1635static int ioc3uart_intr(struct ioc3_submodule *is,
1636 struct ioc3_driver_data *idd,
1637 unsigned int pending, struct pt_regs *regs)
1638{
1639 int ret = 0;
1640
1641 /*
1642 * The upper level interrupt handler sends interrupts for both ports
1643 * here. So we need to call for each port with its interrupts.
1644 */
1645
1646 if (pending & SIO_IR_SA)
1647 ret |= ioc3uart_intr_one(is, idd, pending & SIO_IR_SA, regs);
1648 if (pending & SIO_IR_SB)
1649 ret |= ioc3uart_intr_one(is, idd, pending & SIO_IR_SB, regs);
1650
1651 return ret;
1652}
1653
1654/**
1655 * ic3_type
1656 * @port: Port to operate with (we ignore since we only have one port)
1657 *
1658 */
1659static const char *ic3_type(struct uart_port *the_port)
1660{
1661 if (IS_RS232(the_port->line))
1662 return "SGI IOC3 Serial [rs232]";
1663 else
1664 return "SGI IOC3 Serial [rs422]";
1665}
1666
1667/**
1668 * ic3_tx_empty - Is the transmitter empty?
1669 * @port: Port to operate on
1670 *
1671 */
1672static unsigned int ic3_tx_empty(struct uart_port *the_port)
1673{
1674 unsigned int ret = 0;
1675 struct ioc3_port *port = get_ioc3_port(the_port);
1676
1677 if (readl(&port->ip_serial_regs->shadow) & SHADOW_TEMT)
1678 ret = TIOCSER_TEMT;
1679 return ret;
1680}
1681
1682/**
1683 * ic3_stop_tx - stop the transmitter
1684 * @port: Port to operate on
1685 *
1686 */
1687static void ic3_stop_tx(struct uart_port *the_port)
1688{
1689 struct ioc3_port *port = get_ioc3_port(the_port);
1690
1691 if (port)
1692 set_notification(port, N_OUTPUT_LOWAT, 0);
1693}
1694
1695/**
1696 * ic3_stop_rx - stop the receiver
1697 * @port: Port to operate on
1698 *
1699 */
1700static void ic3_stop_rx(struct uart_port *the_port)
1701{
1702 struct ioc3_port *port = get_ioc3_port(the_port);
1703
1704 if (port)
1705 port->ip_flags &= ~INPUT_ENABLE;
1706}
1707
1708/**
1709 * null_void_function
1710 * @port: Port to operate on
1711 *
1712 */
1713static void null_void_function(struct uart_port *the_port)
1714{
1715}
1716
1717/**
1718 * ic3_shutdown - shut down the port - free irq and disable
1719 * @port: port to shut down
1720 *
1721 */
1722static void ic3_shutdown(struct uart_port *the_port)
1723{
1724 unsigned long port_flags;
1725 struct ioc3_port *port;
1726 struct uart_info *info;
1727
1728 port = get_ioc3_port(the_port);
1729 if (!port)
1730 return;
1731
1732 info = the_port->info;
1733 wake_up_interruptible(&info->delta_msr_wait);
1734
1735 spin_lock_irqsave(&the_port->lock, port_flags);
1736 set_notification(port, N_ALL, 0);
1737 spin_unlock_irqrestore(&the_port->lock, port_flags);
1738}
1739
1740/**
1741 * ic3_set_mctrl - set control lines (dtr, rts, etc)
1742 * @port: Port to operate on
1743 * @mctrl: Lines to set/unset
1744 *
1745 */
1746static void ic3_set_mctrl(struct uart_port *the_port, unsigned int mctrl)
1747{
1748 unsigned char mcr = 0;
1749
1750 if (mctrl & TIOCM_RTS)
1751 mcr |= UART_MCR_RTS;
1752 if (mctrl & TIOCM_DTR)
1753 mcr |= UART_MCR_DTR;
1754 if (mctrl & TIOCM_OUT1)
1755 mcr |= UART_MCR_OUT1;
1756 if (mctrl & TIOCM_OUT2)
1757 mcr |= UART_MCR_OUT2;
1758 if (mctrl & TIOCM_LOOP)
1759 mcr |= UART_MCR_LOOP;
1760
1761 set_mcr(the_port, mcr, SHADOW_DTR);
1762}
1763
1764/**
1765 * ic3_get_mctrl - get control line info
1766 * @port: port to operate on
1767 *
1768 */
1769static unsigned int ic3_get_mctrl(struct uart_port *the_port)
1770{
1771 struct ioc3_port *port = get_ioc3_port(the_port);
1772 uint32_t shadow;
1773 unsigned int ret = 0;
1774
1775 if (!port)
1776 return 0;
1777
1778 shadow = readl(&port->ip_serial_regs->shadow);
1779 if (shadow & SHADOW_DCD)
1780 ret |= TIOCM_CD;
1781 if (shadow & SHADOW_DR)
1782 ret |= TIOCM_DSR;
1783 if (shadow & SHADOW_CTS)
1784 ret |= TIOCM_CTS;
1785 return ret;
1786}
1787
1788/**
1789 * ic3_start_tx - Start transmitter. Called with the_port->lock
1790 * @port: Port to operate on
1791 *
1792 */
1793static void ic3_start_tx(struct uart_port *the_port)
1794{
1795 struct ioc3_port *port = get_ioc3_port(the_port);
1796
1797 if (port) {
1798 set_notification(port, N_OUTPUT_LOWAT, 1);
1799 enable_intrs(port, port->ip_hooks->intr_tx_mt);
1800 }
1801}
1802
1803/**
1804 * ic3_break_ctl - handle breaks
1805 * @port: Port to operate on
1806 * @break_state: Break state
1807 *
1808 */
1809static void ic3_break_ctl(struct uart_port *the_port, int break_state)
1810{
1811}
1812
1813/**
1814 * ic3_startup - Start up the serial port - always return 0 (We're always on)
1815 * @port: Port to operate on
1816 *
1817 */
1818static int ic3_startup(struct uart_port *the_port)
1819{
1820 int retval;
1821 struct ioc3_port *port;
1822 struct ioc3_card *card_ptr;
1823 unsigned long port_flags;
1824
1825 if (!the_port) {
1826 NOT_PROGRESS();
1827 return -ENODEV;
1828 }
1829 port = get_ioc3_port(the_port);
1830 if (!port) {
1831 NOT_PROGRESS();
1832 return -ENODEV;
1833 }
1834 card_ptr = port->ip_card;
1835 port->ip_port = the_port;
1836
1837 if (!card_ptr) {
1838 NOT_PROGRESS();
1839 return -ENODEV;
1840 }
1841
1842 /* Start up the serial port */
1843 spin_lock_irqsave(&the_port->lock, port_flags);
1844 retval = ic3_startup_local(the_port);
1845 spin_unlock_irqrestore(&the_port->lock, port_flags);
1846 return retval;
1847}
1848
1849/**
1850 * ic3_set_termios - set termios stuff
1851 * @port: port to operate on
1852 * @termios: New settings
1853 * @termios: Old
1854 *
1855 */
1856static void
1857ic3_set_termios(struct uart_port *the_port,
1858 struct termios *termios, struct termios *old_termios)
1859{
1860 unsigned long port_flags;
1861
1862 spin_lock_irqsave(&the_port->lock, port_flags);
1863 ioc3_change_speed(the_port, termios, old_termios);
1864 spin_unlock_irqrestore(&the_port->lock, port_flags);
1865}
1866
1867/**
1868 * ic3_request_port - allocate resources for port - no op....
1869 * @port: port to operate on
1870 *
1871 */
1872static int ic3_request_port(struct uart_port *port)
1873{
1874 return 0;
1875}
1876
1877/* Associate the uart functions above - given to serial core */
1878static struct uart_ops ioc3_ops = {
1879 .tx_empty = ic3_tx_empty,
1880 .set_mctrl = ic3_set_mctrl,
1881 .get_mctrl = ic3_get_mctrl,
1882 .stop_tx = ic3_stop_tx,
1883 .start_tx = ic3_start_tx,
1884 .stop_rx = ic3_stop_rx,
1885 .enable_ms = null_void_function,
1886 .break_ctl = ic3_break_ctl,
1887 .startup = ic3_startup,
1888 .shutdown = ic3_shutdown,
1889 .set_termios = ic3_set_termios,
1890 .type = ic3_type,
1891 .release_port = null_void_function,
1892 .request_port = ic3_request_port,
1893};
1894
1895/*
1896 * Boot-time initialization code
1897 */
1898
1899static struct uart_driver ioc3_uart = {
1900 .owner = THIS_MODULE,
1901 .driver_name = "ioc3_serial",
1902 .dev_name = DEVICE_NAME,
1903 .major = DEVICE_MAJOR,
1904 .minor = DEVICE_MINOR,
1905 .nr = MAX_LOGICAL_PORTS
1906};
1907
1908/**
1909 * ioc3_serial_core_attach - register with serial core
1910 * This is done during pci probing
1911 * @is: submodule struct for this
1912 * @idd: handle for this card
1913 */
1914static inline int ioc3_serial_core_attach( struct ioc3_submodule *is,
1915 struct ioc3_driver_data *idd)
1916{
1917 struct ioc3_port *port;
1918 struct uart_port *the_port;
1919 struct ioc3_card *card_ptr = idd->data[is->id];
1920 int ii, phys_port;
1921 struct pci_dev *pdev = idd->pdev;
1922
1923 DPRINT_CONFIG(("%s: attach pdev 0x%p - card_ptr 0x%p\n",
1924 __FUNCTION__, pdev, (void *)card_ptr));
1925
1926 if (!card_ptr)
1927 return -ENODEV;
1928
1929 /* once around for each logical port on this card */
1930 for (ii = 0; ii < LOGICAL_PORTS_PER_CARD; ii++) {
1931 phys_port = GET_PHYSICAL_PORT(ii);
1932 the_port = &card_ptr->ic_port[phys_port].
1933 icp_uart_port[GET_LOGICAL_PORT(ii)];
1934 port = card_ptr->ic_port[phys_port].icp_port;
1935 port->ip_port = the_port;
1936
1937 DPRINT_CONFIG(("%s: attach the_port 0x%p / port 0x%p [%d/%d]\n",
1938 __FUNCTION__, (void *)the_port, (void *)port,
1939 phys_port, ii));
1940
1941 /* membase, iobase and mapbase just need to be non-0 */
1942 the_port->membase = (unsigned char __iomem *)1;
1943 the_port->iobase = (pdev->bus->number << 16) | ii;
1944 the_port->line = (Num_of_ioc3_cards << 2) | ii;
1945 the_port->mapbase = 1;
1946 the_port->type = PORT_16550A;
1947 the_port->fifosize = FIFO_SIZE;
1948 the_port->ops = &ioc3_ops;
1949 the_port->irq = idd->irq_io;
1950 the_port->dev = &pdev->dev;
1951
1952 if (uart_add_one_port(&ioc3_uart, the_port) < 0) {
1953 printk(KERN_WARNING
1954 "%s: unable to add port %d bus %d\n",
1955 __FUNCTION__, the_port->line, pdev->bus->number);
1956 } else {
1957 DPRINT_CONFIG(("IOC3 serial port %d irq %d bus %d\n",
1958 the_port->line, the_port->irq, pdev->bus->number));
1959 }
1960
1961 /* all ports are rs232 for now */
1962 if (IS_PHYSICAL_PORT(ii))
1963 ioc3_set_proto(port, PROTO_RS232);
1964 }
1965 return 0;
1966}
1967
1968/**
1969 * ioc3uart_remove - register detach function
1970 * @is: submodule struct for this submodule
1971 * @idd: ioc3 driver data for this submodule
1972 */
1973
1974static int ioc3uart_remove(struct ioc3_submodule *is,
1975 struct ioc3_driver_data *idd)
1976{
1977 struct ioc3_card *card_ptr = idd->data[is->id];
1978 struct uart_port *the_port;
1979 struct ioc3_port *port;
1980 int ii;
1981
1982 if (card_ptr) {
1983 for (ii = 0; ii < LOGICAL_PORTS_PER_CARD; ii++) {
1984 the_port = &card_ptr->ic_port[GET_PHYSICAL_PORT(ii)].
1985 icp_uart_port[GET_LOGICAL_PORT(ii)];
1986 if (the_port)
1987 uart_remove_one_port(&ioc3_uart, the_port);
1988 port = card_ptr->ic_port[GET_PHYSICAL_PORT(ii)].icp_port;
1989 if (port && IS_PHYSICAL_PORT(ii)
1990 && (GET_PHYSICAL_PORT(ii) == 0)) {
1991 pci_free_consistent(port->ip_idd->pdev,
1992 TOTAL_RING_BUF_SIZE,
1993 (void *)port->ip_cpu_ringbuf,
1994 port->ip_dma_ringbuf);
1995 kfree(port);
1996 card_ptr->ic_port[GET_PHYSICAL_PORT(ii)].
1997 icp_port = NULL;
1998 }
1999 }
2000 kfree(card_ptr);
2001 idd->data[is->id] = NULL;
2002 }
2003 return 0;
2004}
2005
2006/**
2007 * ioc3uart_probe - card probe function called from shim driver
2008 * @is: submodule struct for this submodule
2009 * @idd: ioc3 driver data for this card
2010 */
2011
2012static int __devinit
2013ioc3uart_probe(struct ioc3_submodule *is, struct ioc3_driver_data *idd)
2014{
2015 struct pci_dev *pdev = idd->pdev;
2016 struct ioc3_card *card_ptr;
2017 int ret = 0;
2018 struct ioc3_port *port;
2019 struct ioc3_port *ports[PORTS_PER_CARD];
2020 int phys_port;
2021
2022 DPRINT_CONFIG(("%s (0x%p, 0x%p)\n", __FUNCTION__, is, idd));
2023
2024 card_ptr = kmalloc(sizeof(struct ioc3_card), GFP_KERNEL);
2025 if (!card_ptr) {
2026 printk(KERN_WARNING "ioc3_attach_one"
2027 ": unable to get memory for the IOC3\n");
2028 return -ENOMEM;
2029 }
2030 memset(card_ptr, 0, sizeof(struct ioc3_card));
2031 idd->data[is->id] = card_ptr;
2032 Submodule_slot = is->id;
2033
2034 writel(((UARTA_BASE >> 3) << SIO_CR_SER_A_BASE_SHIFT) |
2035 ((UARTB_BASE >> 3) << SIO_CR_SER_B_BASE_SHIFT) |
2036 (0xf << SIO_CR_CMD_PULSE_SHIFT), &idd->vma->sio_cr);
2037
2038 pci_write_config_dword(pdev, PCI_LAT, 0xff00);
2039
2040 /* Enable serial port mode select generic PIO pins as outputs */
2041 ioc3_gpcr_set(idd, GPCR_UARTA_MODESEL | GPCR_UARTB_MODESEL);
2042
2043 /* Create port structures for each port */
2044 for (phys_port = 0; phys_port < PORTS_PER_CARD; phys_port++) {
2045 port = kmalloc(sizeof(struct ioc3_port), GFP_KERNEL);
2046 if (!port) {
2047 printk(KERN_WARNING
2048 "IOC3 serial memory not available for port\n");
2049 goto out4;
2050 }
2051 memset(port, 0, sizeof(struct ioc3_port));
2052 spin_lock_init(&port->ip_lock);
2053
2054 /* we need to remember the previous ones, to point back to
2055 * them farther down - setting up the ring buffers.
2056 */
2057 ports[phys_port] = port;
2058
2059 /* init to something useful */
2060 card_ptr->ic_port[phys_port].icp_port = port;
2061 port->ip_is = is;
2062 port->ip_idd = idd;
2063 port->ip_baud = 9600;
2064 port->ip_card = card_ptr;
2065 port->ip_hooks = &hooks_array[phys_port];
2066
2067 /* Setup each port */
2068 if (phys_port == 0) {
2069 port->ip_serial_regs = &idd->vma->port_a;
2070 port->ip_uart_regs = &idd->vma->sregs.uarta;
2071
2072 DPRINT_CONFIG(("%s : Port A ip_serial_regs 0x%p "
2073 "ip_uart_regs 0x%p\n",
2074 __FUNCTION__,
2075 (void *)port->ip_serial_regs,
2076 (void *)port->ip_uart_regs));
2077
2078 /* setup ring buffers */
2079 port->ip_cpu_ringbuf = pci_alloc_consistent(pdev,
2080 TOTAL_RING_BUF_SIZE, &port->ip_dma_ringbuf);
2081
2082 BUG_ON(!((((int64_t) port->ip_dma_ringbuf) &
2083 (TOTAL_RING_BUF_SIZE - 1)) == 0));
2084 port->ip_inring = RING(port, RX_A);
2085 port->ip_outring = RING(port, TX_A);
2086 DPRINT_CONFIG(("%s : Port A ip_cpu_ringbuf 0x%p "
2087 "ip_dma_ringbuf 0x%p, ip_inring 0x%p "
2088 "ip_outring 0x%p\n",
2089 __FUNCTION__,
2090 (void *)port->ip_cpu_ringbuf,
2091 (void *)port->ip_dma_ringbuf,
2092 (void *)port->ip_inring,
2093 (void *)port->ip_outring));
2094 }
2095 else {
2096 port->ip_serial_regs = &idd->vma->port_b;
2097 port->ip_uart_regs = &idd->vma->sregs.uartb;
2098
2099 DPRINT_CONFIG(("%s : Port B ip_serial_regs 0x%p "
2100 "ip_uart_regs 0x%p\n",
2101 __FUNCTION__,
2102 (void *)port->ip_serial_regs,
2103 (void *)port->ip_uart_regs));
2104
2105 /* share the ring buffers */
2106 port->ip_dma_ringbuf =
2107 ports[phys_port - 1]->ip_dma_ringbuf;
2108 port->ip_cpu_ringbuf =
2109 ports[phys_port - 1]->ip_cpu_ringbuf;
2110 port->ip_inring = RING(port, RX_B);
2111 port->ip_outring = RING(port, TX_B);
2112 DPRINT_CONFIG(("%s : Port B ip_cpu_ringbuf 0x%p "
2113 "ip_dma_ringbuf 0x%p, ip_inring 0x%p "
2114 "ip_outring 0x%p\n",
2115 __FUNCTION__,
2116 (void *)port->ip_cpu_ringbuf,
2117 (void *)port->ip_dma_ringbuf,
2118 (void *)port->ip_inring,
2119 (void *)port->ip_outring));
2120 }
2121
2122 DPRINT_CONFIG(("%s : port %d [addr 0x%p] card_ptr 0x%p",
2123 __FUNCTION__,
2124 phys_port, (void *)port, (void *)card_ptr));
2125 DPRINT_CONFIG((" ip_serial_regs 0x%p ip_uart_regs 0x%p\n",
2126 (void *)port->ip_serial_regs,
2127 (void *)port->ip_uart_regs));
2128
2129 /* Initialize the hardware for IOC3 */
2130 port_init(port);
2131
2132 DPRINT_CONFIG(("%s: phys_port %d port 0x%p inring 0x%p "
2133 "outring 0x%p\n",
2134 __FUNCTION__,
2135 phys_port, (void *)port,
2136 (void *)port->ip_inring,
2137 (void *)port->ip_outring));
2138
2139 }
2140
2141 /* register port with the serial core */
2142
2143 if ((ret = ioc3_serial_core_attach(is, idd)))
2144 goto out4;
2145
2146 Num_of_ioc3_cards++;
2147
2148 return ret;
2149
2150 /* error exits that give back resources */
2151out4:
2152 kfree(card_ptr);
2153 return ret;
2154}
2155
2156static struct ioc3_submodule ioc3uart_submodule = {
2157 .name = "IOC3uart",
2158 .probe = ioc3uart_probe,
2159 .remove = ioc3uart_remove,
2160 /* call .intr for both ports initially */
2161 .irq_mask = SIO_IR_SA | SIO_IR_SB,
2162 .intr = ioc3uart_intr,
2163 .owner = THIS_MODULE,
2164};
2165
2166/**
2167 * ioc3_detect - module init called,
2168 */
2169static int __devinit ioc3uart_init(void)
2170{
2171 int ret;
2172
2173 /* register with serial core */
2174 if ((ret = uart_register_driver(&ioc3_uart)) < 0) {
2175 printk(KERN_WARNING
2176 "%s: Couldn't register IOC3 uart serial driver\n",
2177 __FUNCTION__);
2178 return ret;
2179 }
2180 ret = ioc3_register_submodule(&ioc3uart_submodule);
2181 if (ret)
2182 uart_unregister_driver(&ioc3_uart);
2183 return ret;
2184}
2185
2186static void __devexit ioc3uart_exit(void)
2187{
2188 ioc3_unregister_submodule(&ioc3uart_submodule);
2189 uart_unregister_driver(&ioc3_uart);
2190}
2191
2192module_init(ioc3uart_init);
2193module_exit(ioc3uart_exit);
2194
2195MODULE_AUTHOR("Pat Gefre - Silicon Graphics Inc. (SGI) <pfg@sgi.com>");
2196MODULE_DESCRIPTION("Serial PCI driver module for SGI IOC3 card");
2197MODULE_LICENSE("GPL");
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-02 02:51:29 -0500