Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 into devel

Conflicts:

	arch/arm/mach-at91/gpio.c

6 files changed, 60 insertions, 2 deletions

diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 0d934bfbdd9b..b4b39811b445 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -2083,6 +2083,20 @@ static int serial8250_startup(struct uart_port *port)
 
         serial8250_set_mctrl(&up->port, up->port.mctrl);
 
+        /* Serial over Lan (SoL) hack:
+           Intel 8257x Gigabit ethernet chips have a
+           16550 emulation, to be used for Serial Over Lan.
+           Those chips take a longer time than a normal
+           serial device to signalize that a transmission
+           data was queued. Due to that, the above test generally
+           fails. One solution would be to delay the reading of
+           iir. However, this is not reliable, since the timeout
+           is variable. So, let's just don't test if we receive
+           TX irq. This way, we'll never enable UART_BUG_TXEN.
+         */
+        if (up->port.flags & UPF_NO_TXEN_TEST)
+                goto dont_test_tx_en;
+
         /*
          * Do a quick test to see if we receive an
          * interrupt when we enable the TX irq.
@@ -2102,6 +2116,7 @@ static int serial8250_startup(struct uart_port *port)
                 up->bugs &= ~UART_BUG_TXEN;
         }
 
+dont_test_tx_en:
         spin_unlock_irqrestore(&up->port.lock, flags);
 
         /*
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index 536d8e510f66..533f82025adf 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -798,6 +798,21 @@ pci_default_setup(struct serial_private *priv,
         return setup_port(priv, port, bar, offset, board->reg_shift);
 }
 
+static int skip_tx_en_setup(struct serial_private *priv,
+                        const struct pciserial_board *board,
+                        struct uart_port *port, int idx)
+{
+        port->flags |= UPF_NO_TXEN_TEST;
+        printk(KERN_DEBUG "serial8250: skipping TxEn test for device "
+                          "[%04x:%04x] subsystem [%04x:%04x]\n",
+                          priv->dev->vendor,
+                          priv->dev->device,
+                          priv->dev->subsystem_vendor,
+                          priv->dev->subsystem_device);
+
+        return pci_default_setup(priv, board, port, idx);
+}
+
 /* This should be in linux/pci_ids.h */
 #define PCI_VENDOR_ID_SBSMODULARIO      0x124B
 #define PCI_SUBVENDOR_ID_SBSMODULARIO   0x124B
@@ -864,6 +879,27 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
                 .init           = pci_inteli960ni_init,
                 .setup          = pci_default_setup,
         },
+        {
+                .vendor         = PCI_VENDOR_ID_INTEL,
+                .device         = PCI_DEVICE_ID_INTEL_8257X_SOL,
+                .subvendor      = PCI_ANY_ID,
+                .subdevice      = PCI_ANY_ID,
+                .setup          = skip_tx_en_setup,
+        },
+        {
+                .vendor         = PCI_VENDOR_ID_INTEL,
+                .device         = PCI_DEVICE_ID_INTEL_82573L_SOL,
+                .subvendor      = PCI_ANY_ID,
+                .subdevice      = PCI_ANY_ID,
+                .setup          = skip_tx_en_setup,
+        },
+        {
+                .vendor         = PCI_VENDOR_ID_INTEL,
+                .device         = PCI_DEVICE_ID_INTEL_82573E_SOL,
+                .subvendor      = PCI_ANY_ID,
+                .subdevice      = PCI_ANY_ID,
+                .setup          = skip_tx_en_setup,
+        },
         /*
          * ITE
          */
diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
index 89362d733d62..8f58f7ff0dd7 100644
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
@@ -877,6 +877,10 @@ static int atmel_startup(struct uart_port *port)
                 }
         }
 
+        /* Save current CSR for comparison in atmel_tasklet_func() */
+        atmel_port->irq_status_prev = UART_GET_CSR(port);
+        atmel_port->irq_status = atmel_port->irq_status_prev;
+
         /*
          * Finally, enable the serial port
          */
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index a50954612b60..9f460b175c50 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -1129,7 +1129,7 @@ static int serial_imx_probe(struct platform_device *pdev)
         sport->timer.function = imx_timeout;
         sport->timer.data     = (unsigned long)sport;
 
-        sport->clk = clk_get(&pdev->dev, "uart_clk");
+        sport->clk = clk_get(&pdev->dev, "uart");
         if (IS_ERR(sport->clk)) {
                 ret = PTR_ERR(sport->clk);
                 goto unmap;
diff --git a/drivers/serial/jsm/jsm_driver.c b/drivers/serial/jsm/jsm_driver.c
index 92187e28608a..ac79cbe4c2cf 100644
--- a/drivers/serial/jsm/jsm_driver.c
+++ b/drivers/serial/jsm/jsm_driver.c
@@ -84,6 +84,8 @@ static int jsm_probe_one(struct pci_dev *pdev, const struct pci_device_id *ent)
         brd->pci_dev = pdev;
         if (pdev->device == PCIE_DEVICE_ID_NEO_4_IBM)
                 brd->maxports = 4;
+        else if (pdev->device == PCI_DEVICE_ID_DIGI_NEO_8)
+                brd->maxports = 8;
         else
                 brd->maxports = 2;
 
@@ -212,6 +214,7 @@ static struct pci_device_id jsm_pci_tbl[] = {
         { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2RJ45), 0, 0, 2 },
         { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2RJ45PRI), 0, 0, 3 },
         { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCIE_DEVICE_ID_NEO_4_IBM), 0, 0, 4 },
+        { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_DIGI_NEO_8), 0, 0, 5 },
         { 0, }
 };
 MODULE_DEVICE_TABLE(pci, jsm_pci_tbl);
diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h
index 3599828b9766..022e89ffec1d 100644
--- a/drivers/serial/sh-sci.h
+++ b/drivers/serial/sh-sci.h
@@ -133,7 +133,7 @@
 # define SCSPTR3        0xffed0024      /* 16 bit SCIF */
 # define SCSPTR4        0xffee0024      /* 16 bit SCIF */
 # define SCSPTR5        0xffef0024      /* 16 bit SCIF */
-# define SCIF_OPER      0x0001          /* Overrun error bit */
+# define SCIF_ORER      0x0001          /* Overrun error bit */
 # define SCSCR_INIT(port)       0x3a    /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
 #elif defined(CONFIG_CPU_SUBTYPE_SH7201) || \
       defined(CONFIG_CPU_SUBTYPE_SH7203) || \