Merge branch 'forlinus' of git://parisc-linux.org/home/kyle/git/parisc-2.6

2 files changed, 10 insertions, 7 deletions

diff --git a/drivers/serial/8250_gsc.c b/drivers/serial/8250_gsc.c
index 431aa5761a7a..8b4947933d9b 100644
--- a/drivers/serial/8250_gsc.c
+++ b/drivers/serial/8250_gsc.c
@@ -29,7 +29,6 @@
 static int __init 
 serial_init_chip(struct parisc_device *dev)
 {
-        static int serial_line_nr;
         struct uart_port port;
         unsigned long address;
         int err;
@@ -42,12 +41,13 @@ serial_init_chip(struct parisc_device *dev)
                  */
                 if (parisc_parent(dev)->id.hw_type != HPHW_IOA) {
                         printk(KERN_INFO "Serial: device 0x%lx not configured.\n"
-                                "Enable support for Wax, Lasi, Asp or Dino.\n", dev->hpa);
+                                "Enable support for Wax, Lasi, Asp or Dino.\n",
+                                dev->hpa.start);
                 }
                 return -ENODEV;
         }
 
-        address = dev->hpa;
+        address = dev->hpa.start;
         if (dev->id.sversion != 0x8d) {
                 address += 0x800;
         }
diff --git a/drivers/serial/mux.c b/drivers/serial/mux.c
index 189064607709..660bae5ba179 100644
--- a/drivers/serial/mux.c
+++ b/drivers/serial/mux.c
@@ -27,6 +27,7 @@
 #include <linux/delay.h> /* for udelay */
 #include <linux/device.h>
 #include <asm/io.h>
+#include <asm/irq.h>
 #include <asm/parisc-device.h>
 
 #ifdef CONFIG_MAGIC_SYSRQ
@@ -444,7 +445,7 @@ static int __init mux_probe(struct parisc_device *dev)
         unsigned long bytecnt;
         struct uart_port *port;
 
-        status = pdc_iodc_read(&bytecnt, dev->hpa, 0, iodc_data, 32);
+        status = pdc_iodc_read(&bytecnt, dev->hpa.start, 0, iodc_data, 32);
         if(status != PDC_OK) {
                 printk(KERN_ERR "Serial mux: Unable to read IODC.\n");
                 return 1;
@@ -469,16 +470,18 @@ static int __init mux_probe(struct parisc_device *dev)
         for(i = 0; i < ports; ++i, ++port_cnt) {
                 port = &mux_ports[port_cnt];
                 port->iobase    = 0;
-                port->mapbase   = dev->hpa + MUX_OFFSET + (i * MUX_LINE_OFFSET);
+                port->mapbase   = dev->hpa.start + MUX_OFFSET +
+                                                (i * MUX_LINE_OFFSET);
                 port->membase   = ioremap(port->mapbase, MUX_LINE_OFFSET);
                 port->iotype    = SERIAL_IO_MEM;
                 port->type      = PORT_MUX;
-                port->irq       = SERIAL_IRQ_NONE;
+                port->irq       = NO_IRQ;
                 port->uartclk   = 0;
                 port->fifosize  = MUX_FIFO_SIZE;
                 port->ops       = &mux_pops;
                 port->flags     = UPF_BOOT_AUTOCONF;
                 port->line      = port_cnt;
+                spin_lock_init(&port->lock);
                 status = uart_add_one_port(&mux_driver, port);
                 BUG_ON(status);
         }
@@ -497,7 +500,7 @@ static struct parisc_device_id mux_tbl[] = {
 MODULE_DEVICE_TABLE(parisc, mux_tbl);
 
 static struct parisc_driver serial_mux_driver = {
-        .name =         "Serial MUX",
+        .name =         "serial_mux",
         .id_table =     mux_tbl,
         .probe =        mux_probe,
 };