/spare/repo/netdev-2.6 branch 'master'

13 files changed, 94 insertions, 140 deletions

diff --git a/drivers/serial/68328serial.c b/drivers/serial/68328serial.c
index d27fb4c881d2..9097f2f7b12a 100644
--- a/drivers/serial/68328serial.c
+++ b/drivers/serial/68328serial.c
@@ -316,7 +316,7 @@ static _INLINE_ void receive_chars(struct m68k_serial *info, struct pt_regs *reg
 /*                              show_net_buffers(); */
                                 return;
                         } else if (ch == 0x12) { /* ^R */
-                                machine_restart(NULL);
+                                emergency_restart();
                                 return;
 #endif /* CONFIG_MAGIC_SYSRQ */
                         }
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index de54bdc5398b..07f05e9d0955 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -389,6 +389,9 @@ static void __devexit sbs_exit(struct pci_dev *dev)
  *     - 10x cards have control registers in IO and/or memory space;
  *     - 20x cards have control registers in standard PCI configuration space.
  *
+ * There are also Quartet Serial cards which use Oxford Semiconductor
+ * 16954 quad UART PCI chip clocked by 18.432 MHz quartz.
+ *
  * Note: some SIIG cards are probed by the parport_serial object.
  */
 
@@ -1026,6 +1029,10 @@ enum pci_board_num_t {
         pbn_b0_2_921600,
         pbn_b0_4_921600,
 
+        pbn_b0_2_1130000,
+
+        pbn_b0_4_1152000,
+
         pbn_b0_bt_1_115200,
         pbn_b0_bt_2_115200,
         pbn_b0_bt_8_115200,
@@ -1159,6 +1166,20 @@ static struct pci_board pci_boards[] __devinitdata = {
                 .uart_offset    = 8,
         },
 
+        [pbn_b0_2_1130000] = {
+                .flags          = FL_BASE0,
+                .num_ports      = 2,
+                .base_baud      = 1130000,
+                .uart_offset    = 8,
+        },
+
+        [pbn_b0_4_1152000] = {
+                .flags          = FL_BASE0,
+                .num_ports      = 4,
+                .base_baud      = 1152000,
+                .uart_offset    = 8,
+        },
+
         [pbn_b0_bt_1_115200] = {
                 .flags          = FL_BASE0|FL_BASE_BARS,
                 .num_ports      = 1,
@@ -1755,33 +1776,30 @@ pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent)
 static void __devexit pciserial_remove_one(struct pci_dev *dev)
 {
         struct serial_private *priv = pci_get_drvdata(dev);
+        struct pci_serial_quirk *quirk;
+        int i;
 
         pci_set_drvdata(dev, NULL);
 
-        if (priv) {
-                struct pci_serial_quirk *quirk;
-                int i;
-
-                for (i = 0; i < priv->nr; i++)
-                        serial8250_unregister_port(priv->line[i]);
+        for (i = 0; i < priv->nr; i++)
+                serial8250_unregister_port(priv->line[i]);
 
-                for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) {
-                        if (priv->remapped_bar[i])
-                                iounmap(priv->remapped_bar[i]);
-                        priv->remapped_bar[i] = NULL;
-                }
+        for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) {
+                if (priv->remapped_bar[i])
+                        iounmap(priv->remapped_bar[i]);
+                priv->remapped_bar[i] = NULL;
+        }
 
-                /*
-                 * Find the exit quirks.
-                 */
-                quirk = find_quirk(dev);
-                if (quirk->exit)
-                        quirk->exit(dev);
+        /*
+         * Find the exit quirks.
+         */
+        quirk = find_quirk(dev);
+        if (quirk->exit)
+                quirk->exit(dev);
 
-                pci_disable_device(dev);
+        pci_disable_device(dev);
 
-                kfree(priv);
-        }
+        kfree(priv);
 }
 
 static int pciserial_suspend_one(struct pci_dev *dev, pm_message_t state)
@@ -1978,6 +1996,19 @@ static struct pci_device_id serial_pci_tbl[] = {
                 PCI_VENDOR_ID_SPECIALIX, PCI_SUBDEVICE_ID_SPECIALIX_SPEED4, 0, 0,
                 pbn_b0_4_921600 },
         {       PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
+                PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL, 0, 0,
+                pbn_b0_4_1152000 },
+
+                /*
+                 * The below card is a little controversial since it is the
+                 * subject of a PCI vendor/device ID clash.  (See
+                 * www.ussg.iu.edu/hypermail/linux/kernel/0303.1/0516.html).
+                 * For now just used the hex ID 0x950a.
+                 */
+        {       PCI_VENDOR_ID_OXSEMI, 0x950a,
+                PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+                pbn_b0_2_1130000 },
+        {       PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
                 pbn_b0_4_115200 },
         {       PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI952,
diff --git a/drivers/serial/8250_pnp.c b/drivers/serial/8250_pnp.c
index 18c58fb73899..6b321e82cafb 100644
--- a/drivers/serial/8250_pnp.c
+++ b/drivers/serial/8250_pnp.c
@@ -394,7 +394,7 @@ static int __devinit serial_pnp_guess_board(struct pnp_dev *dev, int *flags)
 }
 
 static int __devinit
-serial_pnp_probe(struct pnp_dev * dev, const struct pnp_device_id *dev_id)
+serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
 {
         struct uart_port port;
         int ret, line, flags = dev_id->driver_data;
@@ -406,15 +406,23 @@ serial_pnp_probe(struct pnp_dev * dev, const struct pnp_device_id *dev_id)
         }
 
         memset(&port, 0, sizeof(struct uart_port));
-        port.irq = pnp_irq(dev,0);
-        port.iobase = pnp_port_start(dev, 0);
+        port.irq = pnp_irq(dev, 0);
+        if (pnp_port_valid(dev, 0)) {
+                port.iobase = pnp_port_start(dev, 0);
+                port.iotype = UPIO_PORT;
+        } else if (pnp_mem_valid(dev, 0)) {
+                port.mapbase = pnp_mem_start(dev, 0);
+                port.iotype = UPIO_MEM;
+                port.flags = UPF_IOREMAP;
+        } else
+                return -ENODEV;
 
 #ifdef SERIAL_DEBUG_PNP
-        printk("Setup PNP port: port %x, irq %d, type %d\n",
-               port.iobase, port.irq, port.iotype);
+        printk("Setup PNP port: port %x, mem 0x%lx, irq %d, type %d\n",
+               port.iobase, port.mapbase, port.irq, port.iotype);
 #endif
 
-        port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF;
+        port.flags |= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF;
         port.uartclk = 1843200;
         port.dev = &dev->dev;
 
@@ -426,7 +434,7 @@ serial_pnp_probe(struct pnp_dev * dev, const struct pnp_device_id *dev_id)
 
 }
 
-static void __devexit serial_pnp_remove(struct pnp_dev * dev)
+static void __devexit serial_pnp_remove(struct pnp_dev *dev)
 {
         long line = (long)pnp_get_drvdata(dev);
         if (line)
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index e0d0a470ddfc..97034d3937fd 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -306,13 +306,6 @@ config SERIAL_S3C2410_CONSOLE
           your boot loader about how to pass options to the kernel at
           boot time.)
 
-config SERIAL_BAST_SIO
-        bool "Support for BAST SuperIO serial ports"
-        depends on ARCH_BAST && SERIAL_8250=y
-        help
-          Support for registerin the SuperIO chip on BAST board with
-          the 8250/16550 uart code.
-
 config SERIAL_DZ
         bool "DECstation DZ serial driver"
         depends on MACH_DECSTATION && MIPS32
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 65bd4381685e..11c7dc483f93 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -44,7 +44,6 @@ obj-$(CONFIG_SERIAL_LH7A40X) += serial_lh7a40x.o
 obj-$(CONFIG_SERIAL_AU1X00) += au1x00_uart.o
 obj-$(CONFIG_SERIAL_DZ) += dz.o
 obj-$(CONFIG_SERIAL_SH_SCI) += sh-sci.o
-obj-$(CONFIG_SERIAL_BAST_SIO) += bast_sio.o
 obj-$(CONFIG_SERIAL_SGI_L1_CONSOLE) += sn_console.o
 obj-$(CONFIG_SERIAL_CPM) += cpm_uart/
 obj-$(CONFIG_SERIAL_IMX) += imx.o
diff --git a/drivers/serial/bast_sio.c b/drivers/serial/bast_sio.c
deleted file mode 100644
index 2b48fab6f0c6..000000000000
--- a/drivers/serial/bast_sio.c
+++ /dev/null
@@ -1,80 +0,0 @@
-/* linux/drivers/serial/bast_sio.c
- *
- * Copyright (c) 2004 Simtec Electronics
- *   Ben Dooks <ben@simtec.co.uk>
- *
- * http://www.simtec.co.uk/products/EB2410ITX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Modifications:
- *      23-Sep-2004  BJD  Added copyright header
- *      23-Sep-2004  BJD  Added serial port remove code
-*/
-
-#include <linux/module.h>
-#include <linux/config.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/tty.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/types.h>
-
-#include <asm/io.h>
-#include <asm/serial.h>
-#include <asm/mach-types.h>
-
-#include <asm/arch/map.h>
-#include <asm/arch/irqs.h>
-#include <asm/arch/bast-map.h>
-#include <asm/arch/bast-irq.h>
-
-static int __init serial_bast_register(unsigned long port, unsigned int irq)
-{
-        struct serial_struct serial_req;
-
-        serial_req.flags      = UPF_AUTOPROBE | UPF_SHARE_IRQ;
-        serial_req.baud_base  = BASE_BAUD;
-        serial_req.irq        = irq;
-        serial_req.io_type    = UPIO_MEM;
-        serial_req.iomap_base = port;
-        serial_req.iomem_base = ioremap(port, 0x10);
-        serial_req.iomem_reg_shift = 0;
-
-        return register_serial(&serial_req);
-}
-
-#define SERIAL_BASE (S3C2410_CS2 + BAST_PA_SUPERIO)
-
-static int port[2] = { -1, -1 };
-
-static int __init serial_bast_init(void)
-{
-        if (machine_is_bast()) {
-                port[0] = serial_bast_register(SERIAL_BASE + 0x2f8, IRQ_PCSERIAL1);
-                port[1] = serial_bast_register(SERIAL_BASE + 0x3f8, IRQ_PCSERIAL2);
-        }
-
-        return 0;
-}
-
-static void __exit serial_bast_exit(void)
-{
-        if (port[0] != -1)
-                unregister_serial(port[0]);
-        if (port[1] != -1)
-                unregister_serial(port[1]);
-}
-
-
-module_init(serial_bast_init);
-module_exit(serial_bast_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Ben Dooks, ben@simtec.co.uk");
-MODULE_DESCRIPTION("BAST Onboard Serial setup");
-
-
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.c b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
index 7911912f50c7..8efbd6d1d6a4 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm1.c
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
@@ -185,7 +185,7 @@ int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con)
         memsz = L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize) +
             L1_CACHE_ALIGN(pinfo->tx_nrfifos * pinfo->tx_fifosize);
         if (is_con) {
-                mem_addr = (u8 *) m8xx_cpm_hostalloc(memsz);
+                mem_addr = (u8 *) cpm_dpram_addr(cpm_dpalloc(memsz, 8));
                 dma_addr = 0;
         } else
                 mem_addr = dma_alloc_coherent(NULL, memsz, &dma_addr,
diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c
index 3da5494953af..23b8871e74cc 100644
--- a/drivers/serial/crisv10.c
+++ b/drivers/serial/crisv10.c
@@ -426,8 +426,6 @@
 static char *serial_version = "$Revision: 1.25 $";
 
 #include <linux/config.h>
-#include <linux/version.h>
-
 #include <linux/types.h>
 #include <linux/errno.h>
 #include <linux/signal.h>
diff --git a/drivers/serial/icom.c b/drivers/serial/icom.c
index 546a0bc77e1e..c112b32764e8 100644
--- a/drivers/serial/icom.c
+++ b/drivers/serial/icom.c
@@ -25,7 +25,6 @@
 #define SERIAL_DO_RESTART
 #include <linux/module.h>
 #include <linux/config.h>
-#include <linux/version.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/signal.h>
diff --git a/drivers/serial/jsm/jsm.h b/drivers/serial/jsm/jsm.h
index 777829fa3300..18753193f59b 100644
--- a/drivers/serial/jsm/jsm.h
+++ b/drivers/serial/jsm/jsm.h
@@ -28,7 +28,6 @@
 #define __JSM_DRIVER_H
 
 #include <linux/kernel.h>
-#include <linux/version.h>
 #include <linux/types.h>        /* To pick up the varions Linux types */
 #include <linux/tty.h>
 #include <linux/serial_core.h>
@@ -90,7 +89,7 @@ enum {
 #define WRITEBUFLEN     ((4096) + 4)
 #define MYFLIPLEN       N_TTY_BUF_SIZE
 
-#define JSM_VERSION     "jsm: 1.1-1-INKERNEL"
+#define JSM_VERSION     "jsm: 1.2-1-INKERNEL"
 #define JSM_PARTNUM     "40002438_A-INKERNEL"
 
 struct jsm_board;
diff --git a/drivers/serial/jsm/jsm_driver.c b/drivers/serial/jsm/jsm_driver.c
index cc5d21300ed3..7e56c7824194 100644
--- a/drivers/serial/jsm/jsm_driver.c
+++ b/drivers/serial/jsm/jsm_driver.c
@@ -22,6 +22,7 @@
  * Scott H Kilau <Scott_Kilau@digi.com>
  * Wendy Xiong   <wendyx@us.ltcfwd.linux.ibm.com>
  *
+ *
  ***********************************************************************/
 #include <linux/moduleparam.h>
 #include <linux/pci.h>
@@ -42,7 +43,7 @@ struct uart_driver jsm_uart_driver = {
         .owner          = THIS_MODULE,
         .driver_name    = JSM_DRIVER_NAME,
         .dev_name       = "ttyn",
-        .major          = 253,
+        .major          = 0,
         .minor          = JSM_MINOR_START,
         .nr             = NR_PORTS,
 };
diff --git a/drivers/serial/jsm/jsm_neo.c b/drivers/serial/jsm/jsm_neo.c
index 3a11a69feb44..6f22b42d9337 100644
--- a/drivers/serial/jsm/jsm_neo.c
+++ b/drivers/serial/jsm/jsm_neo.c
@@ -48,8 +48,9 @@ static inline void neo_pci_posting_flush(struct jsm_board *bd)
 
 static void neo_set_cts_flow_control(struct jsm_channel *ch)
 {
-        u8 ier = readb(&ch->ch_neo_uart->ier);
-        u8 efr = readb(&ch->ch_neo_uart->efr);
+        u8 ier, efr;
+        ier = readb(&ch->ch_neo_uart->ier);
+        efr = readb(&ch->ch_neo_uart->efr);
 
         jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Setting CTSFLOW\n");
 
@@ -78,8 +79,9 @@ static void neo_set_cts_flow_control(struct jsm_channel *ch)
 
 static void neo_set_rts_flow_control(struct jsm_channel *ch)
 {
-        u8 ier = readb(&ch->ch_neo_uart->ier);
-        u8 efr = readb(&ch->ch_neo_uart->efr);
+        u8 ier, efr;
+        ier = readb(&ch->ch_neo_uart->ier);
+        efr = readb(&ch->ch_neo_uart->efr);
 
         jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Setting RTSFLOW\n");
 
@@ -117,8 +119,9 @@ static void neo_set_rts_flow_control(struct jsm_channel *ch)
 
 static void neo_set_ixon_flow_control(struct jsm_channel *ch)
 {
-        u8 ier = readb(&ch->ch_neo_uart->ier);
-        u8 efr = readb(&ch->ch_neo_uart->efr);
+        u8 ier, efr;
+        ier = readb(&ch->ch_neo_uart->ier);
+        efr = readb(&ch->ch_neo_uart->efr);
 
         jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Setting IXON FLOW\n");
 
@@ -153,8 +156,9 @@ static void neo_set_ixon_flow_control(struct jsm_channel *ch)
 
 static void neo_set_ixoff_flow_control(struct jsm_channel *ch)
 {
-        u8 ier = readb(&ch->ch_neo_uart->ier);
-        u8 efr = readb(&ch->ch_neo_uart->efr);
+        u8 ier, efr;
+        ier = readb(&ch->ch_neo_uart->ier);
+        efr = readb(&ch->ch_neo_uart->efr);
 
         jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Setting IXOFF FLOW\n");
 
@@ -190,8 +194,9 @@ static void neo_set_ixoff_flow_control(struct jsm_channel *ch)
 
 static void neo_set_no_input_flow_control(struct jsm_channel *ch)
 {
-        u8 ier = readb(&ch->ch_neo_uart->ier);
-        u8 efr = readb(&ch->ch_neo_uart->efr);
+        u8 ier, efr;
+        ier = readb(&ch->ch_neo_uart->ier);
+        efr = readb(&ch->ch_neo_uart->efr);
 
         jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Unsetting Input FLOW\n");
 
@@ -228,8 +233,9 @@ static void neo_set_no_input_flow_control(struct jsm_channel *ch)
 
 static void neo_set_no_output_flow_control(struct jsm_channel *ch)
 {
-        u8 ier = readb(&ch->ch_neo_uart->ier);
-        u8 efr = readb(&ch->ch_neo_uart->efr);
+        u8 ier, efr;
+        ier = readb(&ch->ch_neo_uart->ier);
+        efr = readb(&ch->ch_neo_uart->efr);
 
         jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Unsetting Output FLOW\n");
 
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index de0136cc5938..1ae0b381c162 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -790,19 +790,19 @@ static struct pcmcia_device_id serial_ids[] = {
         PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM56", 0x2e3ee845, 0xa650c32a),
         PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "REM10", 0x2e3ee845, 0x76df1d29),
         PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "XEM5600", 0x2e3ee845, 0xf1403719),
-        PCMCIA_PFC_DEVICE_PROD_ID12(1, "AnyCom", "Fast Ethernet ", 0x578ba6e7, 0x02d92d1e),
+        PCMCIA_PFC_DEVICE_PROD_ID12(1, "AnyCom", "Fast Ethernet + 56K COMBO", 0x578ba6e7, 0xb0ac62c4),
         PCMCIA_PFC_DEVICE_PROD_ID12(1, "D-Link", "DME336T", 0x1a424a1c, 0xb23897ff),
         PCMCIA_PFC_DEVICE_PROD_ID12(1, "Gateway 2000", "XJEM3336", 0xdd9989be, 0x662c394c),
         PCMCIA_PFC_DEVICE_PROD_ID12(1, "Grey Cell", "GCS3000", 0x2a151fac, 0x48b932ae),
         PCMCIA_PFC_DEVICE_PROD_ID12(1, "Linksys", "EtherFast 10&100 + 56K PC Card (PCMLM56)", 0x0733cc81, 0xb3765033),
         PCMCIA_PFC_DEVICE_PROD_ID12(1, "LINKSYS", "PCMLM336", 0xf7cb0b07, 0x7a821b58),
         PCMCIA_PFC_DEVICE_PROD_ID12(1, "MEGAHERTZ", "XJEM1144/CCEM1144", 0xf510db04, 0x52d21e1e),
-        PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard", 0x0c2f80cd, 0x0573c29f),
-        PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard", 0x0c2f80cd, 0x0573c29f),
+        PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Diamonds Modem+Ethernet", 0xc2f80cd, 0x656947b9),
+        PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Hearts Modem+Ethernet", 0xc2f80cd, 0xdc9ba5ed),
         PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "ComboCard", 0xdcfe12d3, 0xcd8906cc),
         PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "LanModem", 0xdcfe12d3, 0xc67c648f),
         PCMCIA_PFC_DEVICE_PROD_ID12(1, "TDK", "GlobalNetworker 3410/3412", 0x1eae9475, 0xd9a93bed),
-        PCMCIA_PFC_DEVICE_PROD_ID12(1, "Xircom", "CreditCard Ethernet", 0x2e3ee845, 0xc0e778c2),
+        PCMCIA_PFC_DEVICE_PROD_ID12(1, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf),
         PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0104, 0x0070),
         PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0101, 0x0562),
         PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0104, 0x0070),
@@ -840,7 +840,7 @@ static struct pcmcia_device_id serial_ids[] = {
         PCMCIA_DEVICE_PROD_ID12("Computerboards, Inc.", "PCM-COM422", 0xd0b78f51, 0x7e2d49ed),
         PCMCIA_DEVICE_PROD_ID12("Dr. Neuhaus", "FURY CARD 14K4", 0x76942813, 0x8b96ce65),
         PCMCIA_DEVICE_PROD_ID12("Intelligent", "ANGIA FAX/MODEM", 0xb496e65e, 0xf31602a6),
-        PCMCIA_DEVICE_PROD_ID12("Intel", "MODEM 2400", 0x816cc815, 0x23539b80),
+        PCMCIA_DEVICE_PROD_ID12("Intel", "MODEM 2400+", 0x816cc815, 0x412729fb),
         PCMCIA_DEVICE_PROD_ID12("IOTech Inc ", "PCMCIA Dual RS-232 Serial Port Card", 0x3bd2d898, 0x92abc92f),
         PCMCIA_DEVICE_PROD_ID12("MACRONIX", "FAX/MODEM", 0x668388b3, 0x3f9bdf2f),
         PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT1432LT", 0x5f73be51, 0x0b3e2383),