Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6

Conflicts:

	include/asm-powerpc/unistd.h
	include/asm-sparc/unistd.h
	include/asm-sparc64/unistd.h

Signed-off-by: David Woodhouse <dwmw2@infradead.org>

4 files changed, 128 insertions, 75 deletions

diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 674b15c78f68..bbf78aaf9e01 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -362,6 +362,40 @@ serial_out(struct uart_8250_port *up, int offset, int value)
 #define serial_inp(up, offset)          serial_in(up, offset)
 #define serial_outp(up, offset, value)  serial_out(up, offset, value)
 
+/* Uart divisor latch read */
+static inline int _serial_dl_read(struct uart_8250_port *up)
+{
+        return serial_inp(up, UART_DLL) | serial_inp(up, UART_DLM) << 8;
+}
+
+/* Uart divisor latch write */
+static inline void _serial_dl_write(struct uart_8250_port *up, int value)
+{
+        serial_outp(up, UART_DLL, value & 0xff);
+        serial_outp(up, UART_DLM, value >> 8 & 0xff);
+}
+
+#ifdef CONFIG_SERIAL_8250_AU1X00
+/* Au1x00 haven't got a standard divisor latch */
+static int serial_dl_read(struct uart_8250_port *up)
+{
+        if (up->port.iotype == UPIO_AU)
+                return __raw_readl(up->port.membase + 0x28);
+        else
+                return _serial_dl_read(up);
+}
+
+static void serial_dl_write(struct uart_8250_port *up, int value)
+{
+        if (up->port.iotype == UPIO_AU)
+                __raw_writel(value, up->port.membase + 0x28);
+        else
+                _serial_dl_write(up, value);
+}
+#else
+#define serial_dl_read(up) _serial_dl_read(up)
+#define serial_dl_write(up, value) _serial_dl_write(up, value)
+#endif
 
 /*
  * For the 16C950
@@ -494,7 +528,8 @@ static void disable_rsa(struct uart_8250_port *up)
  */
 static int size_fifo(struct uart_8250_port *up)
 {
-        unsigned char old_fcr, old_mcr, old_dll, old_dlm, old_lcr;
+        unsigned char old_fcr, old_mcr, old_lcr;
+        unsigned short old_dl;
         int count;
 
         old_lcr = serial_inp(up, UART_LCR);
@@ -505,10 +540,8 @@ static int size_fifo(struct uart_8250_port *up)
                     UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
         serial_outp(up, UART_MCR, UART_MCR_LOOP);
         serial_outp(up, UART_LCR, UART_LCR_DLAB);
-        old_dll = serial_inp(up, UART_DLL);
-        old_dlm = serial_inp(up, UART_DLM);
-        serial_outp(up, UART_DLL, 0x01);
-        serial_outp(up, UART_DLM, 0x00);
+        old_dl = serial_dl_read(up);
+        serial_dl_write(up, 0x0001);
         serial_outp(up, UART_LCR, 0x03);
         for (count = 0; count < 256; count++)
                 serial_outp(up, UART_TX, count);
@@ -519,8 +552,7 @@ static int size_fifo(struct uart_8250_port *up)
         serial_outp(up, UART_FCR, old_fcr);
         serial_outp(up, UART_MCR, old_mcr);
         serial_outp(up, UART_LCR, UART_LCR_DLAB);
-        serial_outp(up, UART_DLL, old_dll);
-        serial_outp(up, UART_DLM, old_dlm);
+        serial_dl_write(up, old_dl);
         serial_outp(up, UART_LCR, old_lcr);
 
         return count;
@@ -750,8 +782,7 @@ static void autoconfig_16550a(struct uart_8250_port *up)
 
                         serial_outp(up, UART_LCR, 0xE0);
 
-                        quot = serial_inp(up, UART_DLM) << 8;
-                        quot += serial_inp(up, UART_DLL);
+                        quot = serial_dl_read(up);
                         quot <<= 3;
 
                         status1 = serial_in(up, 0x04); /* EXCR1 */
@@ -759,8 +790,7 @@ static void autoconfig_16550a(struct uart_8250_port *up)
                         status1 |= 0x10;  /* 1.625 divisor for baud_base --> 921600 */
                         serial_outp(up, 0x04, status1);
                         
-                        serial_outp(up, UART_DLL, quot & 0xff);
-                        serial_outp(up, UART_DLM, quot >> 8);
+                        serial_dl_write(up, quot);
 
                         serial_outp(up, UART_LCR, 0);
 
@@ -1862,8 +1892,7 @@ serial8250_set_termios(struct uart_port *port, struct termios *termios,
                 serial_outp(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */
         }
 
-        serial_outp(up, UART_DLL, quot & 0xff);         /* LS of divisor */
-        serial_outp(up, UART_DLM, quot >> 8);           /* MS of divisor */
+        serial_dl_write(up, quot);
 
         /*
          * LCR DLAB must be set to enable 64-byte FIFO mode. If the FCR
@@ -1906,6 +1935,9 @@ static int serial8250_request_std_resource(struct uart_8250_port *up)
         int ret = 0;
 
         switch (up->port.iotype) {
+        case UPIO_AU:
+                size = 0x100000;
+                /* fall thru */
         case UPIO_MEM:
                 if (!up->port.mapbase)
                         break;
@@ -1938,6 +1970,9 @@ static void serial8250_release_std_resource(struct uart_8250_port *up)
         unsigned int size = 8 << up->port.regshift;
 
         switch (up->port.iotype) {
+        case UPIO_AU:
+                size = 0x100000;
+                /* fall thru */
         case UPIO_MEM:
                 if (!up->port.mapbase)
                         break;
@@ -2200,10 +2235,17 @@ static void
 serial8250_console_write(struct console *co, const char *s, unsigned int count)
 {
         struct uart_8250_port *up = &serial8250_ports[co->index];
+        unsigned long flags;
         unsigned int ier;
+        int locked = 1;
 
         touch_nmi_watchdog();
 
+        if (oops_in_progress) {
+                locked = spin_trylock_irqsave(&up->port.lock, flags);
+        } else
+                spin_lock_irqsave(&up->port.lock, flags);
+
         /*
          *      First save the IER then disable the interrupts
          */
@@ -2221,8 +2263,10 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count)
          *      and restore the IER
          */
         wait_for_xmitr(up, BOTH_EMPTY);
-        up->ier |= UART_IER_THRI;
-        serial_out(up, UART_IER, ier | UART_IER_THRI);
+        serial_out(up, UART_IER, ier);
+
+        if (locked)
+                spin_unlock_irqrestore(&up->port.lock, flags);
 }
 
 static int serial8250_console_setup(struct console *co, char *options)
diff --git a/drivers/serial/8250_au1x00.c b/drivers/serial/8250_au1x00.c
index 3d1bfd07208d..58015fd14be9 100644
--- a/drivers/serial/8250_au1x00.c
+++ b/drivers/serial/8250_au1x00.c
@@ -30,13 +30,12 @@
         {                                               \
                 .iobase         = _base,                \
                 .membase        = (void __iomem *)_base,\
-                .mapbase        = _base,                \
+                .mapbase        = CPHYSADDR(_base),     \
                 .irq            = _irq,                 \
                 .uartclk        = 0,    /* filled */    \
                 .regshift       = 2,                    \
                 .iotype         = UPIO_AU,              \
-                .flags          = UPF_SKIP_TEST |       \
-                                  UPF_IOREMAP,          \
+                .flags          = UPF_SKIP_TEST         \
         }
 
 static struct plat_serial8250_port au1x00_data[] = {
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index fcd7744c4253..17839e753e4c 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -1500,20 +1500,18 @@ uart_block_til_ready(struct file *filp, struct uart_state *state)
 static struct uart_state *uart_get(struct uart_driver *drv, int line)
 {
         struct uart_state *state;
+        int ret = 0;
 
-        mutex_lock(&port_mutex);
         state = drv->state + line;
         if (mutex_lock_interruptible(&state->mutex)) {
-                state = ERR_PTR(-ERESTARTSYS);
-                goto out;
+                ret = -ERESTARTSYS;
+                goto err;
         }
 
         state->count++;
-        if (!state->port) {
-                state->count--;
-                mutex_unlock(&state->mutex);
-                state = ERR_PTR(-ENXIO);
-                goto out;
+        if (!state->port || state->port->flags & UPF_DEAD) {
+                ret = -ENXIO;
+                goto err_unlock;
         }
 
         if (!state->info) {
@@ -1531,15 +1529,17 @@ static struct uart_state *uart_get(struct uart_driver *drv, int line)
                         tasklet_init(&state->info->tlet, uart_tasklet_action,
                                      (unsigned long)state);
                 } else {
-                        state->count--;
-                        mutex_unlock(&state->mutex);
-                        state = ERR_PTR(-ENOMEM);
+                        ret = -ENOMEM;
+                        goto err_unlock;
                 }
         }
-
- out:
-        mutex_unlock(&port_mutex);
         return state;
+
+ err_unlock:
+        state->count--;
+        mutex_unlock(&state->mutex);
+ err:
+        return ERR_PTR(ret);
 }
 
 /*
@@ -1907,9 +1907,12 @@ uart_set_options(struct uart_port *port, struct console *co,
 static void uart_change_pm(struct uart_state *state, int pm_state)
 {
         struct uart_port *port = state->port;
-        if (port->ops->pm)
-                port->ops->pm(port, pm_state, state->pm_state);
-        state->pm_state = pm_state;
+
+        if (state->pm_state != pm_state) {
+                if (port->ops->pm)
+                        port->ops->pm(port, pm_state, state->pm_state);
+                state->pm_state = pm_state;
+        }
 }
 
 int uart_suspend_port(struct uart_driver *drv, struct uart_port *port)
@@ -2085,45 +2088,6 @@ uart_configure_port(struct uart_driver *drv, struct uart_state *state,
         }
 }
 
-/*
- * This reverses the effects of uart_configure_port, hanging up the
- * port before removal.
- */
-static void
-uart_unconfigure_port(struct uart_driver *drv, struct uart_state *state)
-{
-        struct uart_port *port = state->port;
-        struct uart_info *info = state->info;
-
-        if (info && info->tty)
-                tty_vhangup(info->tty);
-
-        mutex_lock(&state->mutex);
-
-        state->info = NULL;
-
-        /*
-         * Free the port IO and memory resources, if any.
-         */
-        if (port->type != PORT_UNKNOWN)
-                port->ops->release_port(port);
-
-        /*
-         * Indicate that there isn't a port here anymore.
-         */
-        port->type = PORT_UNKNOWN;
-
-        /*
-         * Kill the tasklet, and free resources.
-         */
-        if (info) {
-                tasklet_kill(&info->tlet);
-                kfree(info);
-        }
-
-        mutex_unlock(&state->mutex);
-}
-
 static struct tty_operations uart_ops = {
         .open           = uart_open,
         .close          = uart_close,
@@ -2270,6 +2234,7 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *port)
         state = drv->state + port->line;
 
         mutex_lock(&port_mutex);
+        mutex_lock(&state->mutex);
         if (state->port) {
                 ret = -EINVAL;
                 goto out;
@@ -2304,7 +2269,13 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *port)
             port->cons && !(port->cons->flags & CON_ENABLED))
                 register_console(port->cons);
 
+        /*
+         * Ensure UPF_DEAD is not set.
+         */
+        port->flags &= ~UPF_DEAD;
+
  out:
+        mutex_unlock(&state->mutex);
         mutex_unlock(&port_mutex);
 
         return ret;
@@ -2322,6 +2293,7 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *port)
 int uart_remove_one_port(struct uart_driver *drv, struct uart_port *port)
 {
         struct uart_state *state = drv->state + port->line;
+        struct uart_info *info;
 
         BUG_ON(in_interrupt());
 
@@ -2332,11 +2304,48 @@ int uart_remove_one_port(struct uart_driver *drv, struct uart_port *port)
         mutex_lock(&port_mutex);
 
         /*
+         * Mark the port "dead" - this prevents any opens from
+         * succeeding while we shut down the port.
+         */
+        mutex_lock(&state->mutex);
+        port->flags |= UPF_DEAD;
+        mutex_unlock(&state->mutex);
+
+        /*
          * Remove the devices from devfs
          */
         tty_unregister_device(drv->tty_driver, port->line);
 
-        uart_unconfigure_port(drv, state);
+        info = state->info;
+        if (info && info->tty)
+                tty_vhangup(info->tty);
+
+        /*
+         * All users of this port should now be disconnected from
+         * this driver, and the port shut down.  We should be the
+         * only thread fiddling with this port from now on.
+         */
+        state->info = NULL;
+
+        /*
+         * Free the port IO and memory resources, if any.
+         */
+        if (port->type != PORT_UNKNOWN)
+                port->ops->release_port(port);
+
+        /*
+         * Indicate that there isn't a port here anymore.
+         */
+        port->type = PORT_UNKNOWN;
+
+        /*
+         * Kill the tasklet, and free resources.
+         */
+        if (info) {
+                tasklet_kill(&info->tlet);
+                kfree(info);
+        }
+
         state->port = NULL;
         mutex_unlock(&port_mutex);
 
diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c
index 1c4396c2962d..2b4f96541b8e 100644
--- a/drivers/serial/sunsu.c
+++ b/drivers/serial/sunsu.c
@@ -1730,3 +1730,4 @@ static void __exit sunsu_exit(void)
 
 module_init(sunsu_probe);
 module_exit(sunsu_exit);
+MODULE_LICENSE("GPL");