Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6

Conflicts:
	Documentation/feature-removal-schedule.txt
	drivers/scsi/fcoe/fcoe.c
	net/core/drop_monitor.c
	net/core/net-traces.c

18 files changed, 1261 insertions, 320 deletions

diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index b4b39811b445..fb867a9f55e9 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -137,6 +137,7 @@ struct uart_8250_port {
         unsigned char           mcr;
         unsigned char           mcr_mask;       /* mask of user bits */
         unsigned char           mcr_force;      /* mask of forced bits */
+        unsigned char           cur_iotype;     /* Running I/O type */
 
         /*
          * Some bits in registers are cleared on a read, so they must
@@ -286,6 +287,13 @@ static const struct serial8250_config uart_config[] = {
                 .fcr            = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
                 .flags          = UART_CAP_FIFO,
         },
+        [PORT_AR7] = {
+                .name           = "AR7",
+                .fifo_size      = 16,
+                .tx_loadsz      = 16,
+                .fcr            = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00,
+                .flags          = UART_CAP_FIFO | UART_CAP_AFE,
+        },
 };
 
 #if defined (CONFIG_SERIAL_8250_AU1X00)
@@ -471,6 +479,7 @@ static void io_serial_out(struct uart_port *p, int offset, int value)
 
 static void set_io_from_upio(struct uart_port *p)
 {
+        struct uart_8250_port *up = (struct uart_8250_port *)p;
         switch (p->iotype) {
         case UPIO_HUB6:
                 p->serial_in = hub6_serial_in;
@@ -509,6 +518,8 @@ static void set_io_from_upio(struct uart_port *p)
                 p->serial_out = io_serial_out;
                 break;
         }
+        /* Remember loaded iotype */
+        up->cur_iotype = p->iotype;
 }
 
 static void
@@ -1937,6 +1948,9 @@ static int serial8250_startup(struct uart_port *port)
         up->capabilities = uart_config[up->port.type].flags;
         up->mcr = 0;
 
+        if (up->port.iotype != up->cur_iotype)
+                set_io_from_upio(port);
+
         if (up->port.type == PORT_16C950) {
                 /* Wake up and initialize UART */
                 up->acr = 0;
@@ -2563,6 +2577,9 @@ static void serial8250_config_port(struct uart_port *port, int flags)
         if (ret < 0)
                 probeflags &= ~PROBE_RSA;
 
+        if (up->port.iotype != up->cur_iotype)
+                set_io_from_upio(port);
+
         if (flags & UART_CONFIG_TYPE)
                 autoconfig(up, probeflags);
         if (up->port.type != PORT_UNKNOWN && flags & UART_CONFIG_IRQ)
@@ -2671,6 +2688,11 @@ serial8250_register_ports(struct uart_driver *drv, struct device *dev)
 {
         int i;
 
+        for (i = 0; i < nr_uarts; i++) {
+                struct uart_8250_port *up = &serial8250_ports[i];
+                up->cur_iotype = 0xFF;
+        }
+
         serial8250_isa_init_ports();
 
         for (i = 0; i < nr_uarts; i++) {
diff --git a/drivers/serial/8250_gsc.c b/drivers/serial/8250_gsc.c
index 418b4fe9a0a1..33149d982e82 100644
--- a/drivers/serial/8250_gsc.c
+++ b/drivers/serial/8250_gsc.c
@@ -39,9 +39,9 @@ static int __init serial_init_chip(struct parisc_device *dev)
                  */
                 if (parisc_parent(dev)->id.hw_type != HPHW_IOA)
                         printk(KERN_INFO
-                                "Serial: device 0x%lx not configured.\n"
+                                "Serial: device 0x%llx not configured.\n"
                                 "Enable support for Wax, Lasi, Asp or Dino.\n",
-                                dev->hpa.start);
+                                (unsigned long long)dev->hpa.start);
                 return -ENODEV;
         }
 
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index 938bc1b6c3fa..e371a9c15341 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -2776,6 +2776,9 @@ static struct pci_device_id serial_pci_tbl[] = {
         {       PCI_VENDOR_ID_OXSEMI, 0x950a,
                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
                 pbn_b0_2_1130000 },
+        {       PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_C950,
+                PCI_VENDOR_ID_OXSEMI, PCI_SUBDEVICE_ID_OXSEMI_C950, 0, 0,
+                pbn_b0_1_921600 },
         {       PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
                 pbn_b0_4_115200 },
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 343e3a35b6a3..1132c5cae7ab 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -833,6 +833,7 @@ config SERIAL_IMX
         bool "IMX serial port support"
         depends on ARM && (ARCH_IMX || ARCH_MXC)
         select SERIAL_CORE
+        select RATIONAL
         help
           If you have a machine based on a Motorola IMX CPU you
           can enable its onboard serial port by enabling this option.
@@ -860,7 +861,7 @@ config SERIAL_UARTLITE
           Say Y here if you want to use the Xilinx uartlite serial controller.
 
           To compile this driver as a module, choose M here: the
-          module will be called uartlite.ko.
+          module will be called uartlite.
 
 config SERIAL_UARTLITE_CONSOLE
         bool "Support for console on Xilinx uartlite serial port"
@@ -1433,4 +1434,11 @@ config SPORT_BAUD_RATE
         default 19200 if (SERIAL_SPORT_BAUD_RATE_19200)
         default 9600 if (SERIAL_SPORT_BAUD_RATE_9600)
 
+config SERIAL_TIMBERDALE
+        tristate "Support for timberdale UART"
+        depends on MFD_TIMBERDALE
+        select SERIAL_CORE
+        ---help---
+        Add support for UART controller on timberdale.
+
 endmenu
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index d438eb2a73de..45a8658f54d5 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -77,3 +77,4 @@ obj-$(CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL) += nwpserial.o
 obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o
 obj-$(CONFIG_KGDB_SERIAL_CONSOLE) += kgdboc.o
 obj-$(CONFIG_SERIAL_QE) += ucc_uart.o
+obj-$(CONFIG_SERIAL_TIMBERDALE) += timbuart.o
diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c
index e3a5ad5ef1d6..58a4879c7e48 100644
--- a/drivers/serial/amba-pl010.c
+++ b/drivers/serial/amba-pl010.c
@@ -665,7 +665,7 @@ static struct uart_driver amba_reg = {
         .cons                   = AMBA_CONSOLE,
 };
 
-static int pl010_probe(struct amba_device *dev, void *id)
+static int pl010_probe(struct amba_device *dev, struct amba_id *id)
 {
         struct uart_amba_port *uap;
         void __iomem *base;
@@ -686,7 +686,7 @@ static int pl010_probe(struct amba_device *dev, void *id)
                 goto out;
         }
 
-        base = ioremap(dev->res.start, PAGE_SIZE);
+        base = ioremap(dev->res.start, resource_size(&dev->res));
         if (!base) {
                 ret = -ENOMEM;
                 goto free;
diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c
index 8b2b9700f3e4..bf82e28770a9 100644
--- a/drivers/serial/amba-pl011.c
+++ b/drivers/serial/amba-pl011.c
@@ -70,6 +70,23 @@ struct uart_amba_port {
         struct clk              *clk;
         unsigned int            im;     /* interrupt mask */
         unsigned int            old_status;
+        unsigned int            ifls;   /* vendor-specific */
+};
+
+/* There is by now at least one vendor with differing details, so handle it */
+struct vendor_data {
+        unsigned int            ifls;
+        unsigned int            fifosize;
+};
+
+static struct vendor_data vendor_arm = {
+        .ifls                   = UART011_IFLS_RX4_8|UART011_IFLS_TX4_8,
+        .fifosize               = 16,
+};
+
+static struct vendor_data vendor_st = {
+        .ifls                   = UART011_IFLS_RX_HALF|UART011_IFLS_TX_HALF,
+        .fifosize               = 64,
 };
 
 static void pl011_stop_tx(struct uart_port *port)
@@ -360,8 +377,7 @@ static int pl011_startup(struct uart_port *port)
         if (retval)
                 goto clk_dis;
 
-        writew(UART011_IFLS_RX4_8|UART011_IFLS_TX4_8,
-               uap->port.membase + UART011_IFLS);
+        writew(uap->ifls, uap->port.membase + UART011_IFLS);
 
         /*
          * Provoke TX FIFO interrupt into asserting.
@@ -729,9 +745,10 @@ static struct uart_driver amba_reg = {
         .cons                   = AMBA_CONSOLE,
 };
 
-static int pl011_probe(struct amba_device *dev, void *id)
+static int pl011_probe(struct amba_device *dev, struct amba_id *id)
 {
         struct uart_amba_port *uap;
+        struct vendor_data *vendor = id->data;
         void __iomem *base;
         int i, ret;
 
@@ -750,7 +767,7 @@ static int pl011_probe(struct amba_device *dev, void *id)
                 goto out;
         }
 
-        base = ioremap(dev->res.start, PAGE_SIZE);
+        base = ioremap(dev->res.start, resource_size(&dev->res));
         if (!base) {
                 ret = -ENOMEM;
                 goto free;
@@ -762,12 +779,13 @@ static int pl011_probe(struct amba_device *dev, void *id)
                 goto unmap;
         }
 
+        uap->ifls = vendor->ifls;
         uap->port.dev = &dev->dev;
         uap->port.mapbase = dev->res.start;
         uap->port.membase = base;
         uap->port.iotype = UPIO_MEM;
         uap->port.irq = dev->irq[0];
-        uap->port.fifosize = 16;
+        uap->port.fifosize = vendor->fifosize;
         uap->port.ops = &amba_pl011_pops;
         uap->port.flags = UPF_BOOT_AUTOCONF;
         uap->port.line = i;
@@ -812,6 +830,12 @@ static struct amba_id pl011_ids[] __initdata = {
         {
                 .id     = 0x00041011,
                 .mask   = 0x000fffff,
+                .data   = &vendor_arm,
+        },
+        {
+                .id     = 0x00380802,
+                .mask   = 0x00ffffff,
+                .data   = &vendor_st,
         },
         { 0, 0 },
 };
@@ -845,7 +869,11 @@ static void __exit pl011_exit(void)
         uart_unregister_driver(&amba_reg);
 }
 
-module_init(pl011_init);
+/*
+ * While this can be a module, if builtin it's most likely the console
+ * So let's leave module_exit but move module_init to an earlier place
+ */
+arch_initcall(pl011_init);
 module_exit(pl011_exit);
 
 MODULE_AUTHOR("ARM Ltd/Deep Blue Solutions Ltd");
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index d86123e03391..e2f6b1bfac98 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -330,6 +330,11 @@ static void bfin_serial_tx_chars(struct bfin_serial_port *uart)
                 /* Clear TFI bit */
                 UART_PUT_LSR(uart, TFI);
 #endif
+                /* Anomaly notes:
+                 *  05000215 -  we always clear ETBEI within last UART TX
+                 *              interrupt to end a string. It is always set
+                 *              when start a new tx.
+                 */
                 UART_CLEAR_IER(uart, ETBEI);
                 return;
         }
@@ -415,6 +420,7 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart)
         set_dma_start_addr(uart->tx_dma_channel, (unsigned long)(xmit->buf+xmit->tail));
         set_dma_x_count(uart->tx_dma_channel, uart->tx_count);
         set_dma_x_modify(uart->tx_dma_channel, 1);
+        SSYNC();
         enable_dma(uart->tx_dma_channel);
 
         UART_SET_IER(uart, ETBEI);
@@ -473,27 +479,41 @@ static void bfin_serial_dma_rx_chars(struct bfin_serial_port *uart)
 void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart)
 {
         int x_pos, pos;
-        unsigned long flags;
-
-        spin_lock_irqsave(&uart->port.lock, flags);
 
+        dma_disable_irq(uart->rx_dma_channel);
+        spin_lock_bh(&uart->port.lock);
+
+        /* 2D DMA RX buffer ring is used. Because curr_y_count and
+         * curr_x_count can't be read as an atomic operation,
+         * curr_y_count should be read before curr_x_count. When
+         * curr_x_count is read, curr_y_count may already indicate
+         * next buffer line. But, the position calculated here is
+         * still indicate the old line. The wrong position data may
+         * be smaller than current buffer tail, which cause garbages
+         * are received if it is not prohibit.
+         */
         uart->rx_dma_nrows = get_dma_curr_ycount(uart->rx_dma_channel);
         x_pos = get_dma_curr_xcount(uart->rx_dma_channel);
         uart->rx_dma_nrows = DMA_RX_YCOUNT - uart->rx_dma_nrows;
-        if (uart->rx_dma_nrows == DMA_RX_YCOUNT)
+        if (uart->rx_dma_nrows == DMA_RX_YCOUNT || x_pos == 0)
                 uart->rx_dma_nrows = 0;
         x_pos = DMA_RX_XCOUNT - x_pos;
         if (x_pos == DMA_RX_XCOUNT)
                 x_pos = 0;
 
         pos = uart->rx_dma_nrows * DMA_RX_XCOUNT + x_pos;
-        if (pos != uart->rx_dma_buf.tail) {
+        /* Ignore receiving data if new position is in the same line of
+         * current buffer tail and small.
+         */
+        if (pos > uart->rx_dma_buf.tail ||
+                uart->rx_dma_nrows < (uart->rx_dma_buf.tail/DMA_RX_XCOUNT)) {
                 uart->rx_dma_buf.head = pos;
                 bfin_serial_dma_rx_chars(uart);
                 uart->rx_dma_buf.tail = uart->rx_dma_buf.head;
         }
 
-        spin_unlock_irqrestore(&uart->port.lock, flags);
+        spin_unlock_bh(&uart->port.lock);
+        dma_enable_irq(uart->rx_dma_channel);
 
         mod_timer(&(uart->rx_dma_timer), jiffies + DMA_RX_FLUSH_JIFFIES);
 }
@@ -514,6 +534,11 @@ static irqreturn_t bfin_serial_dma_tx_int(int irq, void *dev_id)
         if (!(get_dma_curr_irqstat(uart->tx_dma_channel)&DMA_RUN)) {
                 disable_dma(uart->tx_dma_channel);
                 clear_dma_irqstat(uart->tx_dma_channel);
+                /* Anomaly notes:
+                 *  05000215 -  we always clear ETBEI within last UART TX
+                 *              interrupt to end a string. It is always set
+                 *              when start a new tx.
+                 */
                 UART_CLEAR_IER(uart, ETBEI);
                 xmit->tail = (xmit->tail + uart->tx_count) & (UART_XMIT_SIZE - 1);
                 uart->port.icount.tx += uart->tx_count;
@@ -532,11 +557,26 @@ static irqreturn_t bfin_serial_dma_rx_int(int irq, void *dev_id)
 {
         struct bfin_serial_port *uart = dev_id;
         unsigned short irqstat;
+        int x_pos, pos;
 
         spin_lock(&uart->port.lock);
         irqstat = get_dma_curr_irqstat(uart->rx_dma_channel);
         clear_dma_irqstat(uart->rx_dma_channel);
-        bfin_serial_dma_rx_chars(uart);
+
+        uart->rx_dma_nrows = get_dma_curr_ycount(uart->rx_dma_channel);
+        x_pos = get_dma_curr_xcount(uart->rx_dma_channel);
+        uart->rx_dma_nrows = DMA_RX_YCOUNT - uart->rx_dma_nrows;
+        if (uart->rx_dma_nrows == DMA_RX_YCOUNT || x_pos == 0)
+                uart->rx_dma_nrows = 0;
+
+        pos = uart->rx_dma_nrows * DMA_RX_XCOUNT;
+        if (pos > uart->rx_dma_buf.tail ||
+                uart->rx_dma_nrows < (uart->rx_dma_buf.tail/DMA_RX_XCOUNT)) {
+                uart->rx_dma_buf.head = pos;
+                bfin_serial_dma_rx_chars(uart);
+                uart->rx_dma_buf.tail = uart->rx_dma_buf.head;
+        }
+
         spin_unlock(&uart->port.lock);
 
         return IRQ_HANDLED;
@@ -789,8 +829,16 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios,
                         __func__);
         }
 
-        if (termios->c_cflag & CSTOPB)
-                lcr |= STB;
+        /* Anomaly notes:
+         *  05000231 -  STOP bit is always set to 1 whatever the user is set.
+         */
+        if (termios->c_cflag & CSTOPB) {
+                if (ANOMALY_05000231)
+                        printk(KERN_WARNING "STOP bits other than 1 is not "
+                                "supported in case of anomaly 05000231.\n");
+                else
+                        lcr |= STB;
+        }
         if (termios->c_cflag & PARENB)
                 lcr |= PEN;
         if (!(termios->c_cflag & PARODD))
@@ -940,6 +988,10 @@ static void bfin_serial_reset_irda(struct uart_port *port)
 }
 
 #ifdef CONFIG_CONSOLE_POLL
+/* Anomaly notes:
+ *  05000099 -  Because we only use THRE in poll_put and DR in poll_get,
+ *              losing other bits of UART_LSR is not a problem here.
+ */
 static void bfin_serial_poll_put_char(struct uart_port *port, unsigned char chr)
 {
         struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
@@ -1245,12 +1297,17 @@ static __init void early_serial_write(struct console *con, const char *s,
         }
 }
 
+/*
+ * This should have a .setup or .early_setup in it, but then things get called
+ * without the command line options, and the baud rate gets messed up - so
+ * don't let the common infrastructure play with things. (see calls to setup
+ * & earlysetup in ./kernel/printk.c:register_console()
+ */
 static struct __initdata console bfin_early_serial_console = {
         .name = "early_BFuart",
         .write = early_serial_write,
         .device = uart_console_device,
         .flags = CON_PRINTBUFFER,
-        .setup = bfin_serial_console_setup,
         .index = -1,
         .data  = &bfin_serial_reg,
 };
diff --git a/drivers/serial/bfin_sport_uart.c b/drivers/serial/bfin_sport_uart.c
index 529c0ff7952c..34b4ae0fe760 100644
--- a/drivers/serial/bfin_sport_uart.c
+++ b/drivers/serial/bfin_sport_uart.c
@@ -101,15 +101,16 @@ static inline void tx_one_byte(struct sport_uart_port *up, unsigned int value)
 {
         pr_debug("%s value:%x\n", __func__, value);
         /* Place a Start and Stop bit */
-        __asm__ volatile (
-                "R2 = b#01111111100;\n\t"
-                "R3 = b#10000000001;\n\t"
-                "%0 <<= 2;\n\t"
-                "%0 = %0 & R2;\n\t"
-                "%0 = %0 | R3;\n\t"
-                :"=r"(value)
-                :"0"(value)
-                :"R2", "R3");
+        __asm__ __volatile__ (
+                "R2 = b#01111111100;"
+                "R3 = b#10000000001;"
+                "%0 <<= 2;"
+                "%0 = %0 & R2;"
+                "%0 = %0 | R3;"
+                : "=d"(value)
+                : "d"(value)
+                : "ASTAT", "R2", "R3"
+        );
         pr_debug("%s value:%x\n", __func__, value);
 
         SPORT_PUT_TX(up, value);
@@ -118,27 +119,30 @@ static inline void tx_one_byte(struct sport_uart_port *up, unsigned int value)
 static inline unsigned int rx_one_byte(struct sport_uart_port *up)
 {
         unsigned int value, extract;
+        u32 tmp_mask1, tmp_mask2, tmp_shift, tmp;
 
         value = SPORT_GET_RX32(up);
         pr_debug("%s value:%x\n", __func__, value);
 
         /* Extract 8 bits data */
-        __asm__ volatile (
-                "R5 = 0;\n\t"
-                "P0 = 8;\n\t"
-                "R1 = 0x1801(Z);\n\t"
-                "R3 = 0x0300(Z);\n\t"
-                "R4 = 0;\n\t"
-                "LSETUP(loop_s, loop_e) LC0 = P0;\nloop_s:\t"
-                "R2 = extract(%1, R1.L)(Z);\n\t"
-                "R2 <<= R4;\n\t"
-                "R5 = R5 | R2;\n\t"
-                "R1 = R1 - R3;\nloop_e:\t"
-                "R4 += 1;\n\t"
-                "%0 = R5;\n\t"
-                :"=r"(extract)
-                :"r"(value)
-                :"P0", "R1", "R2","R3","R4", "R5");
+        __asm__ __volatile__ (
+                "%[extr] = 0;"
+                "%[mask1] = 0x1801(Z);"
+                "%[mask2] = 0x0300(Z);"
+                "%[shift] = 0;"
+                "LSETUP(.Lloop_s, .Lloop_e) LC0 = %[lc];"
+                ".Lloop_s:"
+                "%[tmp] = extract(%[val], %[mask1].L)(Z);"
+                "%[tmp] <<= %[shift];"
+                "%[extr] = %[extr] | %[tmp];"
+                "%[mask1] = %[mask1] - %[mask2];"
+                ".Lloop_e:"
+                "%[shift] += 1;"
+                : [val]"=d"(value), [extr]"=d"(extract), [shift]"=d"(tmp_shift), [tmp]"=d"(tmp),
+                  [mask1]"=d"(tmp_mask1), [mask2]"=d"(tmp_mask2)
+                : "d"(value), [lc]"a"(8)
+                : "ASTAT", "LB0", "LC0", "LT0"
+        );
 
         pr_debug("      extract:%x\n", extract);
         return extract;
@@ -149,7 +153,7 @@ static int sport_uart_setup(struct sport_uart_port *up, int sclk, int baud_rate)
         int tclkdiv, tfsdiv, rclkdiv;
 
         /* Set TCR1 and TCR2 */
-        SPORT_PUT_TCR1(up, (LTFS | ITFS | TFSR | TLSBIT | ITCLK));
+        SPORT_PUT_TCR1(up, (LATFS | ITFS | TFSR | TLSBIT | ITCLK));
         SPORT_PUT_TCR2(up, 10);
         pr_debug("%s TCR1:%x, TCR2:%x\n", __func__, SPORT_GET_TCR1(up), SPORT_GET_TCR2(up));
 
@@ -419,7 +423,7 @@ static void sport_shutdown(struct uart_port *port)
 }
 
 static void sport_set_termios(struct uart_port *port,
-                struct termios *termios, struct termios *old)
+                struct ktermios *termios, struct ktermios *old)
 {
         pr_debug("%s enter, c_cflag:%08x\n", __func__, termios->c_cflag);
         uart_update_timeout(port, CS8 ,port->uartclk);
diff --git a/drivers/serial/icom.c b/drivers/serial/icom.c
index 6579e2be1dd1..9f2891c2c4a2 100644
--- a/drivers/serial/icom.c
+++ b/drivers/serial/icom.c
@@ -137,7 +137,12 @@ static LIST_HEAD(icom_adapter_head);
 static spinlock_t icom_lock;
 
 #ifdef ICOM_TRACE
-static inline void trace(struct icom_port *, char *, unsigned long) {};
+static inline void trace(struct icom_port *icom_port, char *trace_pt,
+                        unsigned long trace_data)
+{
+        dev_info(&icom_port->adapter->pci_dev->dev, ":%d:%s - %lx\n",
+        icom_port->port, trace_pt, trace_data);
+}
 #else
 static inline void trace(struct icom_port *icom_port, char *trace_pt, unsigned long trace_data) {};
 #endif
@@ -408,7 +413,7 @@ static void load_code(struct icom_port *icom_port)
         release_firmware(fw);
 
         /* Set Hardware level */
-        if ((icom_port->adapter->version | ADAPTER_V2) == ADAPTER_V2)
+        if (icom_port->adapter->version == ADAPTER_V2)
                 writeb(V2_HARDWARE, &(icom_port->dram->misc_flags));
 
         /* Start the processor in Adapter */
@@ -861,7 +866,7 @@ static irqreturn_t icom_interrupt(int irq, void *dev_id)
         /* find icom_port for this interrupt */
         icom_adapter = (struct icom_adapter *) dev_id;
 
-        if ((icom_adapter->version | ADAPTER_V2) == ADAPTER_V2) {
+        if (icom_adapter->version == ADAPTER_V2) {
                 int_reg = icom_adapter->base_addr + 0x8024;
 
                 adapter_interrupts = readl(int_reg);
@@ -1472,8 +1477,8 @@ static void icom_remove_adapter(struct icom_adapter *icom_adapter)
 
         free_irq(icom_adapter->pci_dev->irq, (void *) icom_adapter);
         iounmap(icom_adapter->base_addr);
-        icom_free_adapter(icom_adapter);
         pci_release_regions(icom_adapter->pci_dev);
+        icom_free_adapter(icom_adapter);
 }
 
 static void icom_kref_release(struct kref *kref)
@@ -1647,15 +1652,6 @@ static void __exit icom_exit(void)
 module_init(icom_init);
 module_exit(icom_exit);
 
-#ifdef ICOM_TRACE
-static inline void trace(struct icom_port *icom_port, char *trace_pt,
-                  unsigned long trace_data)
-{
-        dev_info(&icom_port->adapter->pci_dev->dev, ":%d:%s - %lx\n",
-                 icom_port->port, trace_pt, trace_data);
-}
-#endif
-
 MODULE_AUTHOR("Michael Anderson <mjanders@us.ibm.com>");
 MODULE_DESCRIPTION("IBM iSeries Serial IOA driver");
 MODULE_SUPPORTED_DEVICE
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index 9f460b175c50..285b414f3054 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -8,6 +8,9 @@
  *  Author: Sascha Hauer <sascha@saschahauer.de>
  *  Copyright (C) 2004 Pengutronix
  *
+ *  Copyright (C) 2009 emlix GmbH
+ *  Author: Fabian Godehardt (added IrDA support for iMX)
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
@@ -41,6 +44,8 @@
 #include <linux/serial_core.h>
 #include <linux/serial.h>
 #include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/rational.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -66,7 +71,7 @@
 #define ONEMS 0xb0 /* One Millisecond register */
 #define UTS   0xb4 /* UART Test Register */
 #endif
-#if defined(CONFIG_ARCH_IMX) || defined(CONFIG_ARCH_MX1)
+#ifdef CONFIG_ARCH_MX1
 #define BIPR1 0xb0 /* Incremental Preset Register 1 */
 #define BIPR2 0xb4 /* Incremental Preset Register 2 */
 #define BIPR3 0xb8 /* Incremental Preset Register 3 */
@@ -96,7 +101,7 @@
 #define  UCR1_RTSDEN     (1<<5)  /* RTS delta interrupt enable */
 #define  UCR1_SNDBRK     (1<<4)  /* Send break */
 #define  UCR1_TDMAEN     (1<<3)  /* Transmitter ready DMA enable */
-#if defined(CONFIG_ARCH_IMX) || defined(CONFIG_ARCH_MX1)
+#ifdef CONFIG_ARCH_MX1
 #define  UCR1_UARTCLKEN  (1<<2)  /* UART clock enabled */
 #endif
 #if defined CONFIG_ARCH_MX3 || defined CONFIG_ARCH_MX2
@@ -127,7 +132,7 @@
 #define  UCR3_RXDSEN     (1<<6)  /* Receive status interrupt enable */
 #define  UCR3_AIRINTEN   (1<<5)  /* Async IR wake interrupt enable */
 #define  UCR3_AWAKEN     (1<<4)  /* Async wake interrupt enable */
-#ifdef CONFIG_ARCH_IMX
+#ifdef CONFIG_ARCH_MX1
 #define  UCR3_REF25      (1<<3)  /* Ref freq 25 MHz, only on mx1 */
 #define  UCR3_REF30      (1<<2)  /* Ref Freq 30 MHz, only on mx1 */
 #endif
@@ -148,6 +153,7 @@
 #define  UCR4_DREN       (1<<0)  /* Recv data ready interrupt enable */
 #define  UFCR_RXTL_SHF   0       /* Receiver trigger level shift */
 #define  UFCR_RFDIV      (7<<7)  /* Reference freq divider mask */
+#define  UFCR_RFDIV_REG(x)      (((x) < 7 ? 6 - (x) : 6) << 7)
 #define  UFCR_TXTL_SHF   10      /* Transmitter trigger level shift */
 #define  USR1_PARITYERR  (1<<15) /* Parity error interrupt flag */
 #define  USR1_RTSS       (1<<14) /* RTS pin status */
@@ -180,13 +186,6 @@
 #define  UTS_SOFTRST     (1<<0)  /* Software reset */
 
 /* We've been assigned a range on the "Low-density serial ports" major */
-#ifdef CONFIG_ARCH_IMX
-#define SERIAL_IMX_MAJOR        204
-#define MINOR_START             41
-#define DEV_NAME                "ttySMX"
-#define MAX_INTERNAL_IRQ        IMX_IRQS
-#endif
-
 #ifdef CONFIG_ARCH_MXC
 #define SERIAL_IMX_MAJOR        207
 #define MINOR_START             16
@@ -211,10 +210,20 @@ struct imx_port {
         struct timer_list       timer;
         unsigned int            old_status;
         int                     txirq,rxirq,rtsirq;
-        int                     have_rtscts:1;
+        unsigned int            have_rtscts:1;
+        unsigned int            use_irda:1;
+        unsigned int            irda_inv_rx:1;
+        unsigned int            irda_inv_tx:1;
+        unsigned short          trcv_delay; /* transceiver delay */
         struct clk              *clk;
 };
 
+#ifdef CONFIG_IRDA
+#define USE_IRDA(sport) ((sport)->use_irda)
+#else
+#define USE_IRDA(sport) (0)
+#endif
+
 /*
  * Handle any change of modem status signal since we were last called.
  */
@@ -268,6 +277,48 @@ static void imx_stop_tx(struct uart_port *port)
         struct imx_port *sport = (struct imx_port *)port;
         unsigned long temp;
 
+        if (USE_IRDA(sport)) {
+                /* half duplex - wait for end of transmission */
+                int n = 256;
+                while ((--n > 0) &&
+                      !(readl(sport->port.membase + USR2) & USR2_TXDC)) {
+                        udelay(5);
+                        barrier();
+                }
+                /*
+                 * irda transceiver - wait a bit more to avoid
+                 * cutoff, hardware dependent
+                 */
+                udelay(sport->trcv_delay);
+
+                /*
+                 * half duplex - reactivate receive mode,
+                 * flush receive pipe echo crap
+                 */
+                if (readl(sport->port.membase + USR2) & USR2_TXDC) {
+                        temp = readl(sport->port.membase + UCR1);
+                        temp &= ~(UCR1_TXMPTYEN | UCR1_TRDYEN);
+                        writel(temp, sport->port.membase + UCR1);
+
+                        temp = readl(sport->port.membase + UCR4);
+                        temp &= ~(UCR4_TCEN);
+                        writel(temp, sport->port.membase + UCR4);
+
+                        while (readl(sport->port.membase + URXD0) &
+                               URXD_CHARRDY)
+                                barrier();
+
+                        temp = readl(sport->port.membase + UCR1);
+                        temp |= UCR1_RRDYEN;
+                        writel(temp, sport->port.membase + UCR1);
+
+                        temp = readl(sport->port.membase + UCR4);
+                        temp |= UCR4_DREN;
+                        writel(temp, sport->port.membase + UCR4);
+                }
+                return;
+        }
+
         temp = readl(sport->port.membase + UCR1);
         writel(temp & ~UCR1_TXMPTYEN, sport->port.membase + UCR1);
 }
@@ -302,13 +353,15 @@ static inline void imx_transmit_buffer(struct imx_port *sport)
                 /* send xmit->buf[xmit->tail]
                  * out the port here */
                 writel(xmit->buf[xmit->tail], sport->port.membase + URTX0);
-                xmit->tail = (xmit->tail + 1) &
-                         (UART_XMIT_SIZE - 1);
+                xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
                 sport->port.icount.tx++;
                 if (uart_circ_empty(xmit))
                         break;
         }
 
+        if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+                uart_write_wakeup(&sport->port);
+
         if (uart_circ_empty(xmit))
                 imx_stop_tx(&sport->port);
 }
@@ -321,9 +374,30 @@ static void imx_start_tx(struct uart_port *port)
         struct imx_port *sport = (struct imx_port *)port;
         unsigned long temp;
 
+        if (USE_IRDA(sport)) {
+                /* half duplex in IrDA mode; have to disable receive mode */
+                temp = readl(sport->port.membase + UCR4);
+                temp &= ~(UCR4_DREN);
+                writel(temp, sport->port.membase + UCR4);
+
+                temp = readl(sport->port.membase + UCR1);
+                temp &= ~(UCR1_RRDYEN);
+                writel(temp, sport->port.membase + UCR1);
+        }
+
         temp = readl(sport->port.membase + UCR1);
         writel(temp | UCR1_TXMPTYEN, sport->port.membase + UCR1);
 
+        if (USE_IRDA(sport)) {
+                temp = readl(sport->port.membase + UCR1);
+                temp |= UCR1_TRDYEN;
+                writel(temp, sport->port.membase + UCR1);
+
+                temp = readl(sport->port.membase + UCR4);
+                temp |= UCR4_TCEN;
+                writel(temp, sport->port.membase + UCR4);
+        }
+
         if (readl(sport->port.membase + UTS) & UTS_TXEMPTY)
                 imx_transmit_buffer(sport);
 }
@@ -395,8 +469,7 @@ static irqreturn_t imx_rxint(int irq, void *dev_id)
                                 continue;
                 }
 
-                if (uart_handle_sysrq_char
-                            (&sport->port, (unsigned char)rx))
+                if (uart_handle_sysrq_char(&sport->port, (unsigned char)rx))
                         continue;
 
                 if (rx & (URXD_PRERR | URXD_OVRRUN | URXD_FRMERR) ) {
@@ -471,26 +544,26 @@ static unsigned int imx_tx_empty(struct uart_port *port)
  */
 static unsigned int imx_get_mctrl(struct uart_port *port)
 {
-        struct imx_port *sport = (struct imx_port *)port;
-        unsigned int tmp = TIOCM_DSR | TIOCM_CAR;
+        struct imx_port *sport = (struct imx_port *)port;
+        unsigned int tmp = TIOCM_DSR | TIOCM_CAR;
 
-        if (readl(sport->port.membase + USR1) & USR1_RTSS)
-                tmp |= TIOCM_CTS;
+        if (readl(sport->port.membase + USR1) & USR1_RTSS)
+                tmp |= TIOCM_CTS;
 
-        if (readl(sport->port.membase + UCR2) & UCR2_CTS)
-                tmp |= TIOCM_RTS;
+        if (readl(sport->port.membase + UCR2) & UCR2_CTS)
+                tmp |= TIOCM_RTS;
 
-        return tmp;
+        return tmp;
 }
 
 static void imx_set_mctrl(struct uart_port *port, unsigned int mctrl)
 {
-        struct imx_port *sport = (struct imx_port *)port;
+        struct imx_port *sport = (struct imx_port *)port;
         unsigned long temp;
 
         temp = readl(sport->port.membase + UCR2) & ~UCR2_CTS;
 
-        if (mctrl & TIOCM_RTS)
+        if (mctrl & TIOCM_RTS)
                 temp |= UCR2_CTS;
 
         writel(temp, sport->port.membase + UCR2);
@@ -534,12 +607,7 @@ static int imx_setup_ufcr(struct imx_port *sport, unsigned int mode)
         if(!ufcr_rfdiv)
                 ufcr_rfdiv = 1;
 
-        if(ufcr_rfdiv >= 7)
-                ufcr_rfdiv = 6;
-        else
-                ufcr_rfdiv = 6 - ufcr_rfdiv;
-
-        val |= UFCR_RFDIV & (ufcr_rfdiv << 7);
+        val |= UFCR_RFDIV_REG(ufcr_rfdiv);
 
         writel(val, sport->port.membase + UFCR);
 
@@ -558,8 +626,24 @@ static int imx_startup(struct uart_port *port)
          * requesting IRQs
          */
         temp = readl(sport->port.membase + UCR4);
+
+        if (USE_IRDA(sport))
+                temp |= UCR4_IRSC;
+
         writel(temp & ~UCR4_DREN, sport->port.membase + UCR4);
 
+        if (USE_IRDA(sport)) {
+                /* reset fifo's and state machines */
+                int i = 100;
+                temp = readl(sport->port.membase + UCR2);
+                temp &= ~UCR2_SRST;
+                writel(temp, sport->port.membase + UCR2);
+                while (!(readl(sport->port.membase + UCR2) & UCR2_SRST) &&
+                    (--i > 0)) {
+                        udelay(1);
+                }
+        }
+
         /*
          * Allocate the IRQ(s) i.MX1 has three interrupts whereas later
          * chips only have one interrupt.
@@ -575,12 +659,16 @@ static int imx_startup(struct uart_port *port)
                 if (retval)
                         goto error_out2;
 
-                retval = request_irq(sport->rtsirq, imx_rtsint,
-                             (sport->rtsirq < MAX_INTERNAL_IRQ) ? 0 :
-                               IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
-                                DRIVER_NAME, sport);
-                if (retval)
-                        goto error_out3;
+                /* do not use RTS IRQ on IrDA */
+                if (!USE_IRDA(sport)) {
+                        retval = request_irq(sport->rtsirq, imx_rtsint,
+                                     (sport->rtsirq < MAX_INTERNAL_IRQ) ? 0 :
+                                       IRQF_TRIGGER_FALLING |
+                                       IRQF_TRIGGER_RISING,
+                                        DRIVER_NAME, sport);
+                        if (retval)
+                                goto error_out3;
+                }
         } else {
                 retval = request_irq(sport->port.irq, imx_int, 0,
                                 DRIVER_NAME, sport);
@@ -597,18 +685,49 @@ static int imx_startup(struct uart_port *port)
 
         temp = readl(sport->port.membase + UCR1);
         temp |= UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN;
+
+        if (USE_IRDA(sport)) {
+                temp |= UCR1_IREN;
+                temp &= ~(UCR1_RTSDEN);
+        }
+
         writel(temp, sport->port.membase + UCR1);
 
         temp = readl(sport->port.membase + UCR2);
         temp |= (UCR2_RXEN | UCR2_TXEN);
         writel(temp, sport->port.membase + UCR2);
 
+        if (USE_IRDA(sport)) {
+                /* clear RX-FIFO */
+                int i = 64;
+                while ((--i > 0) &&
+                        (readl(sport->port.membase + URXD0) & URXD_CHARRDY)) {
+                        barrier();
+                }
+        }
+
 #if defined CONFIG_ARCH_MX2 || defined CONFIG_ARCH_MX3
         temp = readl(sport->port.membase + UCR3);
         temp |= UCR3_RXDMUXSEL;
         writel(temp, sport->port.membase + UCR3);
 #endif
 
+        if (USE_IRDA(sport)) {
+                temp = readl(sport->port.membase + UCR4);
+                if (sport->irda_inv_rx)
+                        temp |= UCR4_INVR;
+                else
+                        temp &= ~(UCR4_INVR);
+                writel(temp | UCR4_DREN, sport->port.membase + UCR4);
+
+                temp = readl(sport->port.membase + UCR3);
+                if (sport->irda_inv_tx)
+                        temp |= UCR3_INVT;
+                else
+                        temp &= ~(UCR3_INVT);
+                writel(temp, sport->port.membase + UCR3);
+        }
+
         /*
          * Enable modem status interrupts
          */
@@ -616,6 +735,16 @@ static int imx_startup(struct uart_port *port)
         imx_enable_ms(&sport->port);
         spin_unlock_irqrestore(&sport->port.lock,flags);
 
+        if (USE_IRDA(sport)) {
+                struct imxuart_platform_data *pdata;
+                pdata = sport->port.dev->platform_data;
+                sport->irda_inv_rx = pdata->irda_inv_rx;
+                sport->irda_inv_tx = pdata->irda_inv_tx;
+                sport->trcv_delay = pdata->transceiver_delay;
+                if (pdata->irda_enable)
+                        pdata->irda_enable(1);
+        }
+
         return 0;
 
 error_out3:
@@ -633,6 +762,17 @@ static void imx_shutdown(struct uart_port *port)
         struct imx_port *sport = (struct imx_port *)port;
         unsigned long temp;
 
+        temp = readl(sport->port.membase + UCR2);
+        temp &= ~(UCR2_TXEN);
+        writel(temp, sport->port.membase + UCR2);
+
+        if (USE_IRDA(sport)) {
+                struct imxuart_platform_data *pdata;
+                pdata = sport->port.dev->platform_data;
+                if (pdata->irda_enable)
+                        pdata->irda_enable(0);
+        }
+
         /*
          * Stop our timer.
          */
@@ -642,7 +782,8 @@ static void imx_shutdown(struct uart_port *port)
          * Free the interrupts
          */
         if (sport->txirq > 0) {
-                free_irq(sport->rtsirq, sport);
+                if (!USE_IRDA(sport))
+                        free_irq(sport->rtsirq, sport);
                 free_irq(sport->txirq, sport);
                 free_irq(sport->rxirq, sport);
         } else
@@ -654,6 +795,9 @@ static void imx_shutdown(struct uart_port *port)
 
         temp = readl(sport->port.membase + UCR1);
         temp &= ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN);
+        if (USE_IRDA(sport))
+                temp &= ~(UCR1_IREN);
+
         writel(temp, sport->port.membase + UCR1);
 }
 
@@ -665,7 +809,9 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios,
         unsigned long flags;
         unsigned int ucr2, old_ucr1, old_txrxen, baud, quot;
         unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8;
-        unsigned int div, num, denom, ufcr;
+        unsigned int div, ufcr;
+        unsigned long num, denom;
+        uint64_t tdiv64;
 
         /*
          * If we don't support modem control lines, don't allow
@@ -761,38 +907,39 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios,
                         sport->port.membase + UCR2);
         old_txrxen &= (UCR2_TXEN | UCR2_RXEN);
 
-        div = sport->port.uartclk / (baud * 16);
-        if (div > 7)
-                div = 7;
-        if (!div)
+        if (USE_IRDA(sport)) {
+                /*
+                 * use maximum available submodule frequency to
+                 * avoid missing short pulses due to low sampling rate
+                 */
                 div = 1;
-
-        num = baud;
-        denom = port->uartclk / div / 16;
-
-        /* shift num and denom right until they fit into 16 bits */
-        while (num > 0x10000 || denom > 0x10000) {
-                num >>= 1;
-                denom >>= 1;
+        } else {
+                div = sport->port.uartclk / (baud * 16);
+                if (div > 7)
+                        div = 7;
+                if (!div)
+                        div = 1;
         }
-        if (num > 0)
-                num -= 1;
-        if (denom > 0)
-                denom -= 1;
 
-        writel(num, sport->port.membase + UBIR);
-        writel(denom, sport->port.membase + UBMR);
+        rational_best_approximation(16 * div * baud, sport->port.uartclk,
+                1 << 16, 1 << 16, &num, &denom);
 
-        if (div == 7)
-                div = 6; /* 6 in RFDIV means divide by 7 */
-        else
-                div = 6 - div;
+        tdiv64 = sport->port.uartclk;
+        tdiv64 *= num;
+        do_div(tdiv64, denom * 16 * div);
+        tty_encode_baud_rate(sport->port.info->port.tty,
+                (speed_t)tdiv64, (speed_t)tdiv64);
+
+        num -= 1;
+        denom -= 1;
 
         ufcr = readl(sport->port.membase + UFCR);
-        ufcr = (ufcr & (~UFCR_RFDIV)) |
-            (div << 7);
+        ufcr = (ufcr & (~UFCR_RFDIV)) | UFCR_RFDIV_REG(div);
         writel(ufcr, sport->port.membase + UFCR);
 
+        writel(num, sport->port.membase + UBIR);
+        writel(denom, sport->port.membase + UBMR);
+
 #ifdef ONEMS
         writel(sport->port.uartclk / div / 1000, sport->port.membase + ONEMS);
 #endif
@@ -1031,6 +1178,8 @@ imx_console_setup(struct console *co, char *options)
         if (co->index == -1 || co->index >= ARRAY_SIZE(imx_ports))
                 co->index = 0;
         sport = imx_ports[co->index];
+        if(sport == NULL)
+                return -ENODEV;
 
         if (options)
                 uart_parse_options(options, &baud, &parity, &bits, &flow);
@@ -1070,22 +1219,22 @@ static struct uart_driver imx_reg = {
 
 static int serial_imx_suspend(struct platform_device *dev, pm_message_t state)
 {
-        struct imx_port *sport = platform_get_drvdata(dev);
+        struct imx_port *sport = platform_get_drvdata(dev);
 
-        if (sport)
-                uart_suspend_port(&imx_reg, &sport->port);
+        if (sport)
+                uart_suspend_port(&imx_reg, &sport->port);
 
-        return 0;
+        return 0;
 }
 
 static int serial_imx_resume(struct platform_device *dev)
 {
-        struct imx_port *sport = platform_get_drvdata(dev);
+        struct imx_port *sport = platform_get_drvdata(dev);
 
-        if (sport)
-                uart_resume_port(&imx_reg, &sport->port);
+        if (sport)
+                uart_resume_port(&imx_reg, &sport->port);
 
-        return 0;
+        return 0;
 }
 
 static int serial_imx_probe(struct platform_device *pdev)
@@ -1141,19 +1290,29 @@ static int serial_imx_probe(struct platform_device *pdev)
         imx_ports[pdev->id] = sport;
 
         pdata = pdev->dev.platform_data;
-        if(pdata && (pdata->flags & IMXUART_HAVE_RTSCTS))
+        if (pdata && (pdata->flags & IMXUART_HAVE_RTSCTS))
                 sport->have_rtscts = 1;
 
+#ifdef CONFIG_IRDA
+        if (pdata && (pdata->flags & IMXUART_IRDA))
+                sport->use_irda = 1;
+#endif
+
         if (pdata->init) {
                 ret = pdata->init(pdev);
                 if (ret)
                         goto clkput;
         }
 
-        uart_add_one_port(&imx_reg, &sport->port);
+        ret = uart_add_one_port(&imx_reg, &sport->port);
+        if (ret)
+                goto deinit;
         platform_set_drvdata(pdev, &sport->port);
 
         return 0;
+deinit:
+        if (pdata->exit)
+                pdata->exit(pdev);
 clkput:
         clk_put(sport->clk);
         clk_disable(sport->clk);
@@ -1191,13 +1350,13 @@ static int serial_imx_remove(struct platform_device *pdev)
 }
 
 static struct platform_driver serial_imx_driver = {
-        .probe          = serial_imx_probe,
-        .remove         = serial_imx_remove,
+        .probe          = serial_imx_probe,
+        .remove         = serial_imx_remove,
 
         .suspend        = serial_imx_suspend,
         .resume         = serial_imx_resume,
         .driver         = {
-                .name   = "imx-uart",
+                .name   = "imx-uart",
                 .owner  = THIS_MODULE,
         },
 };
diff --git a/drivers/serial/jsm/jsm.h b/drivers/serial/jsm/jsm.h
index c0a3e2734e24..4e5f3bde0461 100644
--- a/drivers/serial/jsm/jsm.h
+++ b/drivers/serial/jsm/jsm.h
@@ -61,6 +61,7 @@ enum {
         if ((DBG_##nlevel & jsm_debug))                 \
         dev_printk(KERN_##klevel, pdev->dev, fmt, ## args)
 
+#define MAXLINES        256
 #define MAXPORTS        8
 #define MAX_STOPS_SENT  5
 
diff --git a/drivers/serial/jsm/jsm_tty.c b/drivers/serial/jsm/jsm_tty.c
index 31496dc0a0d1..107ce2e187b8 100644
--- a/drivers/serial/jsm/jsm_tty.c
+++ b/drivers/serial/jsm/jsm_tty.c
@@ -33,6 +33,8 @@
 
 #include "jsm.h"
 
+static DECLARE_BITMAP(linemap, MAXLINES);
+
 static void jsm_carrier(struct jsm_channel *ch);
 
 static inline int jsm_get_mstat(struct jsm_channel *ch)
@@ -433,6 +435,7 @@ int __devinit jsm_tty_init(struct jsm_board *brd)
 int __devinit jsm_uart_port_init(struct jsm_board *brd)
 {
         int i;
+        unsigned int line;
         struct jsm_channel *ch;
 
         if (!brd)
@@ -459,9 +462,15 @@ int __devinit jsm_uart_port_init(struct jsm_board *brd)
                 brd->channels[i]->uart_port.membase = brd->re_map_membase;
                 brd->channels[i]->uart_port.fifosize = 16;
                 brd->channels[i]->uart_port.ops = &jsm_ops;
-                brd->channels[i]->uart_port.line = brd->channels[i]->ch_portnum + brd->boardnum * 2;
+                line = find_first_zero_bit(linemap, MAXLINES);
+                if (line >= MAXLINES) {
+                        printk(KERN_INFO "jsm: linemap is full, added device failed\n");
+                        continue;
+                } else
+                        set_bit((int)line, linemap);
+                brd->channels[i]->uart_port.line = line;
                 if (uart_add_one_port (&jsm_uart_driver, &brd->channels[i]->uart_port))
-                        printk(KERN_INFO "Added device failed\n");
+                        printk(KERN_INFO "jsm: add device failed\n");
                 else
                         printk(KERN_INFO "Added device \n");
         }
@@ -494,6 +503,7 @@ int jsm_remove_uart_port(struct jsm_board *brd)
 
                 ch = brd->channels[i];
 
+                clear_bit((int)(ch->uart_port.line), linemap);
                 uart_remove_one_port(&jsm_uart_driver, &brd->channels[i]->uart_port);
         }
 
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index 7f72f8ceaa6f..b3feb6198d57 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -988,7 +988,7 @@ mpc52xx_console_setup(struct console *co, char *options)
         pr_debug("mpc52xx_console_setup co=%p, co->index=%i, options=%s\n",
                  co, co->index, options);
 
-        if ((co->index < 0) || (co->index > MPC52xx_PSC_MAXNUM)) {
+        if ((co->index < 0) || (co->index >= MPC52xx_PSC_MAXNUM)) {
                 pr_debug("PSC%x out of range\n", co->index);
                 return -EINVAL;
         }
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index dbf5357a77b3..a4cf1079b312 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -47,12 +47,17 @@
 #include <linux/clk.h>
 #include <linux/ctype.h>
 #include <linux/err.h>
+#include <linux/list.h>
 
 #ifdef CONFIG_SUPERH
 #include <asm/clock.h>
 #include <asm/sh_bios.h>
 #endif
 
+#ifdef CONFIG_H8300
+#include <asm/gpio.h>
+#endif
+
 #include "sh-sci.h"
 
 struct sci_port {
@@ -75,14 +80,22 @@ struct sci_port {
         int                     break_flag;
 
 #ifdef CONFIG_HAVE_CLK
-        /* Port clock */
-        struct clk              *clk;
+        /* Interface clock */
+        struct clk              *iclk;
+        /* Data clock */
+        struct clk              *dclk;
 #endif
+        struct list_head        node;
 };
 
-#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
-static struct sci_port *serial_console_port;
+struct sh_sci_priv {
+        spinlock_t lock;
+        struct list_head ports;
+
+#ifdef CONFIG_HAVE_CLK
+        struct notifier_block clk_nb;
 #endif
+};
 
 /* Function prototypes */
 static void sci_stop_tx(struct uart_port *port);
@@ -138,9 +151,8 @@ static void sci_poll_put_char(struct uart_port *port, unsigned char c)
                 status = sci_in(port, SCxSR);
         } while (!(status & SCxSR_TDxE(port)));
 
-        sci_in(port, SCxSR);            /* Dummy read */
-        sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port) & ~SCxSR_TEND(port));
         sci_out(port, SCxTDR, c);
+        sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port) & ~SCxSR_TEND(port));
 }
 #endif /* CONFIG_CONSOLE_POLL || CONFIG_SERIAL_SH_SCI_CONSOLE */
 
@@ -159,12 +171,12 @@ static void h8300_sci_config(struct uart_port *port, unsigned int ctrl)
                 *mstpcrl &= ~mask;
 }
 
-static inline void h8300_sci_enable(struct uart_port *port)
+static void h8300_sci_enable(struct uart_port *port)
 {
         h8300_sci_config(port, sci_enable);
 }
 
-static inline void h8300_sci_disable(struct uart_port *port)
+static void h8300_sci_disable(struct uart_port *port)
 {
         h8300_sci_config(port, sci_disable);
 }
@@ -611,7 +623,7 @@ static inline int sci_handle_breaks(struct uart_port *port)
         int copied = 0;
         unsigned short status = sci_in(port, SCxSR);
         struct tty_struct *tty = port->info->port.tty;
-        struct sci_port *s = &sci_ports[port->line];
+        struct sci_port *s = to_sci_port(port);
 
         if (uart_handle_break(port))
                 return 0;
@@ -726,19 +738,43 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
 static int sci_notifier(struct notifier_block *self,
                         unsigned long phase, void *p)
 {
-        int i;
+        struct sh_sci_priv *priv = container_of(self,
+                                                struct sh_sci_priv, clk_nb);
+        struct sci_port *sci_port;
+        unsigned long flags;
 
         if ((phase == CPUFREQ_POSTCHANGE) ||
-            (phase == CPUFREQ_RESUMECHANGE))
-                for (i = 0; i < SCI_NPORTS; i++) {
-                        struct sci_port *s = &sci_ports[i];
-                        s->port.uartclk = clk_get_rate(s->clk);
-                }
+            (phase == CPUFREQ_RESUMECHANGE)) {
+                spin_lock_irqsave(&priv->lock, flags);
+                list_for_each_entry(sci_port, &priv->ports, node)
+                        sci_port->port.uartclk = clk_get_rate(sci_port->dclk);
+
+                spin_unlock_irqrestore(&priv->lock, flags);
+        }
 
         return NOTIFY_OK;
 }
 
-static struct notifier_block sci_nb = { &sci_notifier, NULL, 0 };
+static void sci_clk_enable(struct uart_port *port)
+{
+        struct sci_port *sci_port = to_sci_port(port);
+
+        clk_enable(sci_port->dclk);
+        sci_port->port.uartclk = clk_get_rate(sci_port->dclk);
+
+        if (sci_port->iclk)
+                clk_enable(sci_port->iclk);
+}
+
+static void sci_clk_disable(struct uart_port *port)
+{
+        struct sci_port *sci_port = to_sci_port(port);
+
+        if (sci_port->iclk)
+                clk_disable(sci_port->iclk);
+
+        clk_disable(sci_port->dclk);
+}
 #endif
 
 static int sci_request_irq(struct sci_port *port)
@@ -865,15 +901,11 @@ static void sci_break_ctl(struct uart_port *port, int break_state)
 
 static int sci_startup(struct uart_port *port)
 {
-        struct sci_port *s = &sci_ports[port->line];
+        struct sci_port *s = to_sci_port(port);
 
         if (s->enable)
                 s->enable(port);
 
-#ifdef CONFIG_HAVE_CLK
-        s->clk = clk_get(NULL, "module_clk");
-#endif
-
         sci_request_irq(s);
         sci_start_tx(port);
         sci_start_rx(port, 1);
@@ -883,7 +915,7 @@ static int sci_startup(struct uart_port *port)
 
 static void sci_shutdown(struct uart_port *port)
 {
-        struct sci_port *s = &sci_ports[port->line];
+        struct sci_port *s = to_sci_port(port);
 
         sci_stop_rx(port);
         sci_stop_tx(port);
@@ -891,11 +923,6 @@ static void sci_shutdown(struct uart_port *port)
 
         if (s->disable)
                 s->disable(port);
-
-#ifdef CONFIG_HAVE_CLK
-        clk_put(s->clk);
-        s->clk = NULL;
-#endif
 }
 
 static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
@@ -980,25 +1007,31 @@ static int sci_request_port(struct uart_port *port)
 
 static void sci_config_port(struct uart_port *port, int flags)
 {
-        struct sci_port *s = &sci_ports[port->line];
+        struct sci_port *s = to_sci_port(port);
 
         port->type = s->type;
 
-        if (port->flags & UPF_IOREMAP && !port->membase) {
-#if defined(CONFIG_SUPERH64)
-                port->mapbase = onchip_remap(SCIF_ADDR_SH5, 1024, "SCIF");
-                port->membase = (void __iomem *)port->mapbase;
-#else
+        if (port->membase)
+                return;
+
+        if (port->flags & UPF_IOREMAP) {
                 port->membase = ioremap_nocache(port->mapbase, 0x40);
-#endif
 
-                dev_err(port->dev, "can't remap port#%d\n", port->line);
+                if (IS_ERR(port->membase))
+                        dev_err(port->dev, "can't remap port#%d\n", port->line);
+        } else {
+                /*
+                 * For the simple (and majority of) cases where we don't
+                 * need to do any remapping, just cast the cookie
+                 * directly.
+                 */
+                port->membase = (void __iomem *)port->mapbase;
         }
 }
 
 static int sci_verify_port(struct uart_port *port, struct serial_struct *ser)
 {
-        struct sci_port *s = &sci_ports[port->line];
+        struct sci_port *s = to_sci_port(port);
 
         if (ser->irq != s->irqs[SCIx_TXI_IRQ] || ser->irq > nr_irqs)
                 return -EINVAL;
@@ -1032,63 +1065,60 @@ static struct uart_ops sci_uart_ops = {
 #endif
 };
 
-static void __init sci_init_ports(void)
+static void __devinit sci_init_single(struct platform_device *dev,
+                                      struct sci_port *sci_port,
+                                      unsigned int index,
+                                      struct plat_sci_port *p)
 {
-        static int first = 1;
-        int i;
-
-        if (!first)
-                return;
-
-        first = 0;
-
-        for (i = 0; i < SCI_NPORTS; i++) {
-                sci_ports[i].port.ops           = &sci_uart_ops;
-                sci_ports[i].port.iotype        = UPIO_MEM;
-                sci_ports[i].port.line          = i;
-                sci_ports[i].port.fifosize      = 1;
+        sci_port->port.ops      = &sci_uart_ops;
+        sci_port->port.iotype   = UPIO_MEM;
+        sci_port->port.line     = index;
+        sci_port->port.fifosize = 1;
 
 #if defined(__H8300H__) || defined(__H8300S__)
 #ifdef __H8300S__
-                sci_ports[i].enable     = h8300_sci_enable;
-                sci_ports[i].disable    = h8300_sci_disable;
+        sci_port->enable        = h8300_sci_enable;
+        sci_port->disable       = h8300_sci_disable;
 #endif
-                sci_ports[i].port.uartclk = CONFIG_CPU_CLOCK;
+        sci_port->port.uartclk  = CONFIG_CPU_CLOCK;
 #elif defined(CONFIG_HAVE_CLK)
-                /*
-                 * XXX: We should use a proper SCI/SCIF clock
-                 */
-                {
-                        struct clk *clk = clk_get(NULL, "module_clk");
-                        sci_ports[i].port.uartclk = clk_get_rate(clk);
-                        clk_put(clk);
-                }
+        sci_port->iclk          = p->clk ? clk_get(&dev->dev, p->clk) : NULL;
+        sci_port->dclk          = clk_get(&dev->dev, "peripheral_clk");
+        sci_port->enable        = sci_clk_enable;
+        sci_port->disable       = sci_clk_disable;
 #else
 #error "Need a valid uartclk"
 #endif
 
-                sci_ports[i].break_timer.data = (unsigned long)&sci_ports[i];
-                sci_ports[i].break_timer.function = sci_break_timer;
+        sci_port->break_timer.data = (unsigned long)sci_port;
+        sci_port->break_timer.function = sci_break_timer;
+        init_timer(&sci_port->break_timer);
 
-                init_timer(&sci_ports[i].break_timer);
-        }
-}
-
-int __init early_sci_setup(struct uart_port *port)
-{
-        if (unlikely(port->line > SCI_NPORTS))
-                return -ENODEV;
+        sci_port->port.mapbase  = p->mapbase;
+        sci_port->port.membase  = p->membase;
 
-        sci_init_ports();
+        sci_port->port.irq      = p->irqs[SCIx_TXI_IRQ];
+        sci_port->port.flags    = p->flags;
+        sci_port->port.dev      = &dev->dev;
+        sci_port->type          = sci_port->port.type = p->type;
 
-        sci_ports[port->line].port.membase      = port->membase;
-        sci_ports[port->line].port.mapbase      = port->mapbase;
-        sci_ports[port->line].port.type         = port->type;
+        memcpy(&sci_port->irqs, &p->irqs, sizeof(p->irqs));
 
-        return 0;
 }
 
 #ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
+static struct tty_driver *serial_console_device(struct console *co, int *index)
+{
+        struct uart_driver *p = &sci_uart_driver;
+        *index = co->index;
+        return p->tty_driver;
+}
+
+static void serial_console_putchar(struct uart_port *port, int ch)
+{
+        sci_poll_put_char(port, ch);
+}
+
 /*
  *      Print a string to the serial port trying not to disturb
  *      any possible real use of the port...
@@ -1096,25 +1126,27 @@ int __init early_sci_setup(struct uart_port *port)
 static void serial_console_write(struct console *co, const char *s,
                                  unsigned count)
 {
-        struct uart_port *port = &serial_console_port->port;
+        struct uart_port *port = co->data;
+        struct sci_port *sci_port = to_sci_port(port);
         unsigned short bits;
-        int i;
 
-        for (i = 0; i < count; i++) {
-                if (*s == 10)
-                        sci_poll_put_char(port, '\r');
+        if (sci_port->enable)
+                sci_port->enable(port);
 
-                sci_poll_put_char(port, *s++);
-        }
+        uart_console_write(port, s, count, serial_console_putchar);
 
         /* wait until fifo is empty and last bit has been transmitted */
         bits = SCxSR_TDxE(port) | SCxSR_TEND(port);
         while ((sci_in(port, SCxSR) & bits) != bits)
                 cpu_relax();
+
+        if (sci_port->disable);
+                sci_port->disable(port);
 }
 
 static int __init serial_console_setup(struct console *co, char *options)
 {
+        struct sci_port *sci_port;
         struct uart_port *port;
         int baud = 115200;
         int bits = 8;
@@ -1130,8 +1162,9 @@ static int __init serial_console_setup(struct console *co, char *options)
         if (co->index >= SCI_NPORTS)
                 co->index = 0;
 
-        serial_console_port = &sci_ports[co->index];
-        port = &serial_console_port->port;
+        sci_port = &sci_ports[co->index];
+        port = &sci_port->port;
+        co->data = port;
 
         /*
          * Also need to check port->type, we don't actually have any
@@ -1141,21 +1174,11 @@ static int __init serial_console_setup(struct console *co, char *options)
          */
         if (!port->type)
                 return -ENODEV;
-        if (!port->membase || !port->mapbase)
-                return -ENODEV;
-
-        port->type = serial_console_port->type;
-
-#ifdef CONFIG_HAVE_CLK
-        if (!serial_console_port->clk)
-                serial_console_port->clk = clk_get(NULL, "module_clk");
-#endif
 
-        if (port->flags & UPF_IOREMAP)
-                sci_config_port(port, 0);
+        sci_config_port(port, 0);
 
-        if (serial_console_port->enable)
-                serial_console_port->enable(port);
+        if (sci_port->enable)
+                sci_port->enable(port);
 
         if (options)
                 uart_parse_options(options, &baud, &parity, &bits, &flow);
@@ -1166,22 +1189,21 @@ static int __init serial_console_setup(struct console *co, char *options)
         if (ret == 0)
                 sci_stop_rx(port);
 #endif
+        /* TODO: disable clock */
         return ret;
 }
 
 static struct console serial_console = {
         .name           = "ttySC",
-        .device         = uart_console_device,
+        .device         = serial_console_device,
         .write          = serial_console_write,
         .setup          = serial_console_setup,
         .flags          = CON_PRINTBUFFER,
         .index          = -1,
-        .data           = &sci_uart_driver,
 };
 
 static int __init sci_console_init(void)
 {
-        sci_init_ports();
         register_console(&serial_console);
         return 0;
 }
@@ -1207,6 +1229,61 @@ static struct uart_driver sci_uart_driver = {
         .cons           = SCI_CONSOLE,
 };
 
+
+static int sci_remove(struct platform_device *dev)
+{
+        struct sh_sci_priv *priv = platform_get_drvdata(dev);
+        struct sci_port *p;
+        unsigned long flags;
+
+#ifdef CONFIG_HAVE_CLK
+        cpufreq_unregister_notifier(&priv->clk_nb, CPUFREQ_TRANSITION_NOTIFIER);
+#endif
+
+        spin_lock_irqsave(&priv->lock, flags);
+        list_for_each_entry(p, &priv->ports, node)
+                uart_remove_one_port(&sci_uart_driver, &p->port);
+
+        spin_unlock_irqrestore(&priv->lock, flags);
+
+        kfree(priv);
+        return 0;
+}
+
+static int __devinit sci_probe_single(struct platform_device *dev,
+                                      unsigned int index,
+                                      struct plat_sci_port *p,
+                                      struct sci_port *sciport)
+{
+        struct sh_sci_priv *priv = platform_get_drvdata(dev);
+        unsigned long flags;
+        int ret;
+
+        /* Sanity check */
+        if (unlikely(index >= SCI_NPORTS)) {
+                dev_notice(&dev->dev, "Attempting to register port "
+                           "%d when only %d are available.\n",
+                           index+1, SCI_NPORTS);
+                dev_notice(&dev->dev, "Consider bumping "
+                           "CONFIG_SERIAL_SH_SCI_NR_UARTS!\n");
+                return 0;
+        }
+
+        sci_init_single(dev, sciport, index, p);
+
+        ret = uart_add_one_port(&sci_uart_driver, &sciport->port);
+        if (ret)
+                return ret;
+
+        INIT_LIST_HEAD(&sciport->node);
+
+        spin_lock_irqsave(&priv->lock, flags);
+        list_add(&sciport->node, &priv->ports);
+        spin_unlock_irqrestore(&priv->lock, flags);
+
+        return 0;
+}
+
 /*
  * Register a set of serial devices attached to a platform device.  The
  * list is terminated with a zero flags entry, which means we expect
@@ -1216,57 +1293,34 @@ static struct uart_driver sci_uart_driver = {
 static int __devinit sci_probe(struct platform_device *dev)
 {
         struct plat_sci_port *p = dev->dev.platform_data;
+        struct sh_sci_priv *priv;
         int i, ret = -EINVAL;
 
-        for (i = 0; p && p->flags != 0; p++, i++) {
-                struct sci_port *sciport = &sci_ports[i];
+        priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+        if (!priv)
+                return -ENOMEM;
 
-                /* Sanity check */
-                if (unlikely(i == SCI_NPORTS)) {
-                        dev_notice(&dev->dev, "Attempting to register port "
-                                   "%d when only %d are available.\n",
-                                   i+1, SCI_NPORTS);
-                        dev_notice(&dev->dev, "Consider bumping "
-                                   "CONFIG_SERIAL_SH_SCI_NR_UARTS!\n");
-                        break;
-                }
+        INIT_LIST_HEAD(&priv->ports);
+        spin_lock_init(&priv->lock);
+        platform_set_drvdata(dev, priv);
 
-                sciport->port.mapbase   = p->mapbase;
+#ifdef CONFIG_HAVE_CLK
+        priv->clk_nb.notifier_call = sci_notifier;
+        cpufreq_register_notifier(&priv->clk_nb, CPUFREQ_TRANSITION_NOTIFIER);
+#endif
 
-                if (p->mapbase && !p->membase) {
-                        if (p->flags & UPF_IOREMAP) {
-                                p->membase = ioremap_nocache(p->mapbase, 0x40);
-                                if (IS_ERR(p->membase)) {
-                                        ret = PTR_ERR(p->membase);
-                                        goto err_unreg;
-                                }
-                        } else {
-                                /*
-                                 * For the simple (and majority of) cases
-                                 * where we don't need to do any remapping,
-                                 * just cast the cookie directly.
-                                 */
-                                p->membase = (void __iomem *)p->mapbase;
-                        }
+        if (dev->id != -1) {
+                ret = sci_probe_single(dev, dev->id, p, &sci_ports[dev->id]);
+                if (ret)
+                        goto err_unreg;
+        } else {
+                for (i = 0; p && p->flags != 0; p++, i++) {
+                        ret = sci_probe_single(dev, i, p, &sci_ports[i]);
+                        if (ret)
+                                goto err_unreg;
                 }
-
-                sciport->port.membase   = p->membase;
-
-                sciport->port.irq       = p->irqs[SCIx_TXI_IRQ];
-                sciport->port.flags     = p->flags;
-                sciport->port.dev       = &dev->dev;
-
-                sciport->type           = sciport->port.type = p->type;
-
-                memcpy(&sciport->irqs, &p->irqs, sizeof(p->irqs));
-
-                uart_add_one_port(&sci_uart_driver, &sciport->port);
         }
 
-#ifdef CONFIG_HAVE_CLK
-        cpufreq_register_notifier(&sci_nb, CPUFREQ_TRANSITION_NOTIFIER);
-#endif
-
 #ifdef CONFIG_SH_STANDARD_BIOS
         sh_bios_gdb_detach();
 #endif
@@ -1274,50 +1328,36 @@ static int __devinit sci_probe(struct platform_device *dev)
         return 0;
 
 err_unreg:
-        for (i = i - 1; i >= 0; i--)
-                uart_remove_one_port(&sci_uart_driver, &sci_ports[i].port);
-
+        sci_remove(dev);
         return ret;
 }
 
-static int __devexit sci_remove(struct platform_device *dev)
-{
-        int i;
-
-#ifdef CONFIG_HAVE_CLK
-        cpufreq_unregister_notifier(&sci_nb, CPUFREQ_TRANSITION_NOTIFIER);
-#endif
-
-        for (i = 0; i < SCI_NPORTS; i++)
-                uart_remove_one_port(&sci_uart_driver, &sci_ports[i].port);
-
-        return 0;
-}
-
 static int sci_suspend(struct platform_device *dev, pm_message_t state)
 {
-        int i;
+        struct sh_sci_priv *priv = platform_get_drvdata(dev);
+        struct sci_port *p;
+        unsigned long flags;
 
-        for (i = 0; i < SCI_NPORTS; i++) {
-                struct sci_port *p = &sci_ports[i];
+        spin_lock_irqsave(&priv->lock, flags);
+        list_for_each_entry(p, &priv->ports, node)
+                uart_suspend_port(&sci_uart_driver, &p->port);
 
-                if (p->type != PORT_UNKNOWN && p->port.dev == &dev->dev)
-                        uart_suspend_port(&sci_uart_driver, &p->port);
-        }
+        spin_unlock_irqrestore(&priv->lock, flags);
 
         return 0;
 }
 
 static int sci_resume(struct platform_device *dev)
 {
-        int i;
+        struct sh_sci_priv *priv = platform_get_drvdata(dev);
+        struct sci_port *p;
+        unsigned long flags;
 
-        for (i = 0; i < SCI_NPORTS; i++) {
-                struct sci_port *p = &sci_ports[i];
+        spin_lock_irqsave(&priv->lock, flags);
+        list_for_each_entry(p, &priv->ports, node)
+                uart_resume_port(&sci_uart_driver, &p->port);
 
-                if (p->type != PORT_UNKNOWN && p->port.dev == &dev->dev)
-                        uart_resume_port(&sci_uart_driver, &p->port);
-        }
+        spin_unlock_irqrestore(&priv->lock, flags);
 
         return 0;
 }
@@ -1339,8 +1379,6 @@ static int __init sci_init(void)
 
         printk(banner);
 
-        sci_init_ports();
-
         ret = uart_register_driver(&sci_uart_driver);
         if (likely(ret == 0)) {
                 ret = platform_driver_register(&sci_driver);
diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h
index d0aa82d7fce0..38072c15b845 100644
--- a/drivers/serial/sh-sci.h
+++ b/drivers/serial/sh-sci.h
@@ -91,6 +91,9 @@
 # define SCSPTR5                0xa4050128
 # define SCIF_ORER              0x0001  /* overrun error bit */
 # define SCSCR_INIT(port)       0x0038  /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
+#elif defined(CONFIG_CPU_SUBTYPE_SH7724)
+# define SCIF_ORER              0x0001  /* overrun error bit */
+# define SCSCR_INIT(port)       0x0038  /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
 #elif defined(CONFIG_CPU_SUBTYPE_SH4_202)
 # define SCSPTR2 0xffe80020 /* 16 bit SCIF */
 # define SCIF_ORER 0x0001   /* overrun error bit */
@@ -314,7 +317,18 @@
     }                                                                   \
   }
 
-#define CPU_SCIF_FNS(name, scif_offset, scif_size)                              \
+#ifdef CONFIG_H8300
+/* h8300 don't have SCIF */
+#define CPU_SCIF_FNS(name)                                              \
+  static inline unsigned int sci_##name##_in(struct uart_port *port)    \
+  {                                                                     \
+    return 0;                                                           \
+  }                                                                     \
+  static inline void sci_##name##_out(struct uart_port *port, unsigned int value) \
+  {                                                                     \
+  }
+#else
+#define CPU_SCIF_FNS(name, scif_offset, scif_size)                      \
   static inline unsigned int sci_##name##_in(struct uart_port *port)    \
   {                                                                     \
     SCI_IN(scif_size, scif_offset);                                     \
@@ -323,6 +337,7 @@
   {                                                                     \
     SCI_OUT(scif_size, scif_offset, value);                             \
   }
+#endif
 
 #define CPU_SCI_FNS(name, sci_offset, sci_size)                         \
   static inline unsigned int sci_##name##_in(struct uart_port* port)    \
@@ -360,8 +375,10 @@
                  sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size, \
                  h8_sci_offset, h8_sci_size) \
   CPU_SCI_FNS(name, h8_sci_offset, h8_sci_size)
-#define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size)
-#elif defined(CONFIG_CPU_SUBTYPE_SH7723)
+#define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size) \
+  CPU_SCIF_FNS(name)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\
+      defined(CONFIG_CPU_SUBTYPE_SH7724)
         #define SCIx_FNS(name, sh4_scifa_offset, sh4_scifa_size, sh4_scif_offset, sh4_scif_size) \
                 CPU_SCIx_FNS(name, sh4_scifa_offset, sh4_scifa_size, sh4_scif_offset, sh4_scif_size)
         #define SCIF_FNS(name, sh4_scif_offset, sh4_scif_size) \
@@ -390,7 +407,8 @@ SCIF_FNS(SCFDR,  0x1c, 16)
 SCIF_FNS(SCxTDR, 0x20,  8)
 SCIF_FNS(SCxRDR, 0x24,  8)
 SCIF_FNS(SCLSR,  0x24, 16)
-#elif defined(CONFIG_CPU_SUBTYPE_SH7723)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\
+      defined(CONFIG_CPU_SUBTYPE_SH7724)
 SCIx_FNS(SCSMR,  0x00, 16, 0x00, 16)
 SCIx_FNS(SCBRR,  0x04,  8, 0x04,  8)
 SCIx_FNS(SCSCR,  0x08, 16, 0x08, 16)
@@ -604,10 +622,21 @@ static inline int sci_rxd_in(struct uart_port *port)
                 return ctrl_inb(SCSPTR5) & 0x0008 ? 1 : 0; /* SCIF5 */
         return 1;
 }
+#elif defined(CONFIG_CPU_SUBTYPE_SH7724)
+#  define SCFSR    0x0010
+#  define SCASSR   0x0014
+static inline int sci_rxd_in(struct uart_port *port)
+{
+        if (port->type == PORT_SCIF)
+                return ctrl_inw((port->mapbase + SCFSR))  & SCIF_BRK ? 1 : 0;
+        if (port->type == PORT_SCIFA)
+                return ctrl_inw((port->mapbase + SCASSR)) & SCIF_BRK ? 1 : 0;
+        return 1;
+}
 #elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103)
 static inline int sci_rxd_in(struct uart_port *port)
 {
-         return sci_in(port, SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */
+         return sci_in(port, SCSPTR)&0x0001 ? 1 : 0; /* SCIF */
 }
 #elif defined(__H8300H__) || defined(__H8300S__)
 static inline int sci_rxd_in(struct uart_port *port)
@@ -757,7 +786,8 @@ static inline int sci_rxd_in(struct uart_port *port)
       defined(CONFIG_CPU_SUBTYPE_SH7720) || \
       defined(CONFIG_CPU_SUBTYPE_SH7721)
 #define SCBRR_VALUE(bps, clk) (((clk*2)+16*bps)/(32*bps)-1)
-#elif defined(CONFIG_CPU_SUBTYPE_SH7723)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\
+      defined(CONFIG_CPU_SUBTYPE_SH7724)
 static inline int scbrr_calc(struct uart_port *port, int bps, int clk)
 {
         if (port->type == PORT_SCIF)
diff --git a/drivers/serial/timbuart.c b/drivers/serial/timbuart.c
new file mode 100644
index 000000000000..ac9e5d5f742e
--- /dev/null
+++ b/drivers/serial/timbuart.c
@@ -0,0 +1,526 @@
+/*
+ * timbuart.c timberdale FPGA UART driver
+ * Copyright (c) 2009 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/* Supports:
+ * Timberdale FPGA UART
+ */
+
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/serial_core.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/ioport.h>
+
+#include "timbuart.h"
+
+struct timbuart_port {
+        struct uart_port        port;
+        struct tasklet_struct   tasklet;
+        int                     usedma;
+        u8                      last_ier;
+        struct platform_device  *dev;
+};
+
+static int baudrates[] = {9600, 19200, 38400, 57600, 115200, 230400, 460800,
+        921600, 1843200, 3250000};
+
+static void timbuart_mctrl_check(struct uart_port *port, u8 isr, u8 *ier);
+
+static irqreturn_t timbuart_handleinterrupt(int irq, void *devid);
+
+static void timbuart_stop_rx(struct uart_port *port)
+{
+        /* spin lock held by upper layer, disable all RX interrupts */
+        u8 ier = ioread8(port->membase + TIMBUART_IER) & ~RXFLAGS;
+        iowrite8(ier, port->membase + TIMBUART_IER);
+}
+
+static void timbuart_stop_tx(struct uart_port *port)
+{
+        /* spinlock held by upper layer, disable TX interrupt */
+        u8 ier = ioread8(port->membase + TIMBUART_IER) & ~TXBAE;
+        iowrite8(ier, port->membase + TIMBUART_IER);
+}
+
+static void timbuart_start_tx(struct uart_port *port)
+{
+        struct timbuart_port *uart =
+                container_of(port, struct timbuart_port, port);
+
+        /* do not transfer anything here -> fire off the tasklet */
+        tasklet_schedule(&uart->tasklet);
+}
+
+static void timbuart_flush_buffer(struct uart_port *port)
+{
+        u8 ctl = ioread8(port->membase + TIMBUART_CTRL) | TIMBUART_CTRL_FLSHTX;
+
+        iowrite8(ctl, port->membase + TIMBUART_CTRL);
+        iowrite8(TXBF, port->membase + TIMBUART_ISR);
+}
+
+static void timbuart_rx_chars(struct uart_port *port)
+{
+        struct tty_struct *tty = port->info->port.tty;
+
+        while (ioread8(port->membase + TIMBUART_ISR) & RXDP) {
+                u8 ch = ioread8(port->membase + TIMBUART_RXFIFO);
+                port->icount.rx++;
+                tty_insert_flip_char(tty, ch, TTY_NORMAL);
+        }
+
+        spin_unlock(&port->lock);
+        tty_flip_buffer_push(port->info->port.tty);
+        spin_lock(&port->lock);
+
+        dev_dbg(port->dev, "%s - total read %d bytes\n",
+                __func__, port->icount.rx);
+}
+
+static void timbuart_tx_chars(struct uart_port *port)
+{
+        struct circ_buf *xmit = &port->info->xmit;
+
+        while (!(ioread8(port->membase + TIMBUART_ISR) & TXBF) &&
+                !uart_circ_empty(xmit)) {
+                iowrite8(xmit->buf[xmit->tail],
+                        port->membase + TIMBUART_TXFIFO);
+                xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+                port->icount.tx++;
+        }
+
+        dev_dbg(port->dev,
+                "%s - total written %d bytes, CTL: %x, RTS: %x, baud: %x\n",
+                 __func__,
+                port->icount.tx,
+                ioread8(port->membase + TIMBUART_CTRL),
+                port->mctrl & TIOCM_RTS,
+                ioread8(port->membase + TIMBUART_BAUDRATE));
+}
+
+static void timbuart_handle_tx_port(struct uart_port *port, u8 isr, u8 *ier)
+{
+        struct timbuart_port *uart =
+                container_of(port, struct timbuart_port, port);
+        struct circ_buf *xmit = &port->info->xmit;
+
+        if (uart_circ_empty(xmit) || uart_tx_stopped(port))
+                return;
+
+        if (port->x_char)
+                return;
+
+        if (isr & TXFLAGS) {
+                timbuart_tx_chars(port);
+                /* clear all TX interrupts */
+                iowrite8(TXFLAGS, port->membase + TIMBUART_ISR);
+
+                if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+                        uart_write_wakeup(port);
+        } else
+                /* Re-enable any tx interrupt */
+                *ier |= uart->last_ier & TXFLAGS;
+
+        /* enable interrupts if there are chars in the transmit buffer,
+         * Or if we delivered some bytes and want the almost empty interrupt
+         * we wake up the upper layer later when we got the interrupt
+         * to give it some time to go out...
+         */
+        if (!uart_circ_empty(xmit))
+                *ier |= TXBAE;
+
+        dev_dbg(port->dev, "%s - leaving\n", __func__);
+}
+
+void timbuart_handle_rx_port(struct uart_port *port, u8 isr, u8 *ier)
+{
+        if (isr & RXFLAGS) {
+                /* Some RX status is set */
+                if (isr & RXBF) {
+                        u8 ctl = ioread8(port->membase + TIMBUART_CTRL) |
+                                TIMBUART_CTRL_FLSHRX;
+                        iowrite8(ctl, port->membase + TIMBUART_CTRL);
+                        port->icount.overrun++;
+                } else if (isr & (RXDP))
+                        timbuart_rx_chars(port);
+
+                /* ack all RX interrupts */
+                iowrite8(RXFLAGS, port->membase + TIMBUART_ISR);
+        }
+
+        /* always have the RX interrupts enabled */
+        *ier |= RXBAF | RXBF | RXTT;
+
+        dev_dbg(port->dev, "%s - leaving\n", __func__);
+}
+
+void timbuart_tasklet(unsigned long arg)
+{
+        struct timbuart_port *uart = (struct timbuart_port *)arg;
+        u8 isr, ier = 0;
+
+        spin_lock(&uart->port.lock);
+
+        isr = ioread8(uart->port.membase + TIMBUART_ISR);
+        dev_dbg(uart->port.dev, "%s ISR: %x\n", __func__, isr);
+
+        if (!uart->usedma)
+                timbuart_handle_tx_port(&uart->port, isr, &ier);
+
+        timbuart_mctrl_check(&uart->port, isr, &ier);
+
+        if (!uart->usedma)
+                timbuart_handle_rx_port(&uart->port, isr, &ier);
+
+        iowrite8(ier, uart->port.membase + TIMBUART_IER);
+
+        spin_unlock(&uart->port.lock);
+        dev_dbg(uart->port.dev, "%s leaving\n", __func__);
+}
+
+static unsigned int timbuart_tx_empty(struct uart_port *port)
+{
+        u8 isr = ioread8(port->membase + TIMBUART_ISR);
+
+        return (isr & TXBAE) ? TIOCSER_TEMT : 0;
+}
+
+static unsigned int timbuart_get_mctrl(struct uart_port *port)
+{
+        u8 cts = ioread8(port->membase + TIMBUART_CTRL);
+        dev_dbg(port->dev, "%s - cts %x\n", __func__, cts);
+
+        if (cts & TIMBUART_CTRL_CTS)
+                return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
+        else
+                return TIOCM_DSR | TIOCM_CAR;
+}
+
+static void timbuart_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+        dev_dbg(port->dev, "%s - %x\n", __func__, mctrl);
+
+        if (mctrl & TIOCM_RTS)
+                iowrite8(TIMBUART_CTRL_RTS, port->membase + TIMBUART_CTRL);
+        else
+                iowrite8(TIMBUART_CTRL_RTS, port->membase + TIMBUART_CTRL);
+}
+
+static void timbuart_mctrl_check(struct uart_port *port, u8 isr, u8 *ier)
+{
+        unsigned int cts;
+
+        if (isr & CTS_DELTA) {
+                /* ack */
+                iowrite8(CTS_DELTA, port->membase + TIMBUART_ISR);
+                cts = timbuart_get_mctrl(port);
+                uart_handle_cts_change(port, cts & TIOCM_CTS);
+                wake_up_interruptible(&port->info->delta_msr_wait);
+        }
+
+        *ier |= CTS_DELTA;
+}
+
+static void timbuart_enable_ms(struct uart_port *port)
+{
+        /* N/A */
+}
+
+static void timbuart_break_ctl(struct uart_port *port, int ctl)
+{
+        /* N/A */
+}
+
+static int timbuart_startup(struct uart_port *port)
+{
+        struct timbuart_port *uart =
+                container_of(port, struct timbuart_port, port);
+
+        dev_dbg(port->dev, "%s\n", __func__);
+
+        iowrite8(TIMBUART_CTRL_FLSHRX, port->membase + TIMBUART_CTRL);
+        iowrite8(0xff, port->membase + TIMBUART_ISR);
+        /* Enable all but TX interrupts */
+        iowrite8(RXBAF | RXBF | RXTT | CTS_DELTA,
+                port->membase + TIMBUART_IER);
+
+        return request_irq(port->irq, timbuart_handleinterrupt, IRQF_SHARED,
+                "timb-uart", uart);
+}
+
+static void timbuart_shutdown(struct uart_port *port)
+{
+        struct timbuart_port *uart =
+                container_of(port, struct timbuart_port, port);
+        dev_dbg(port->dev, "%s\n", __func__);
+        free_irq(port->irq, uart);
+        iowrite8(0, port->membase + TIMBUART_IER);
+}
+
+static int get_bindex(int baud)
+{
+        int i;
+
+        for (i = 0; i < ARRAY_SIZE(baudrates); i++)
+                if (baud <= baudrates[i])
+                        return i;
+
+        return -1;
+}
+
+static void timbuart_set_termios(struct uart_port *port,
+        struct ktermios *termios,
+        struct ktermios *old)
+{
+        unsigned int baud;
+        short bindex;
+        unsigned long flags;
+
+        baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16);
+        bindex = get_bindex(baud);
+        dev_dbg(port->dev, "%s - bindex %d\n", __func__, bindex);
+
+        if (bindex < 0)
+                bindex = 0;
+        baud = baudrates[bindex];
+
+        /* The serial layer calls into this once with old = NULL when setting
+           up initially */
+        if (old)
+                tty_termios_copy_hw(termios, old);
+        tty_termios_encode_baud_rate(termios, baud, baud);
+
+        spin_lock_irqsave(&port->lock, flags);
+        iowrite8((u8)bindex, port->membase + TIMBUART_BAUDRATE);
+        uart_update_timeout(port, termios->c_cflag, baud);
+        spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static const char *timbuart_type(struct uart_port *port)
+{
+        return port->type == PORT_UNKNOWN ? "timbuart" : NULL;
+}
+
+/* We do not request/release mappings of the registers here,
+ * currently it's done in the proble function.
+ */
+static void timbuart_release_port(struct uart_port *port)
+{
+        struct platform_device *pdev = to_platform_device(port->dev);
+        int size =
+                resource_size(platform_get_resource(pdev, IORESOURCE_MEM, 0));
+
+        if (port->flags & UPF_IOREMAP) {
+                iounmap(port->membase);
+                port->membase = NULL;
+        }
+
+        release_mem_region(port->mapbase, size);
+}
+
+static int timbuart_request_port(struct uart_port *port)
+{
+        struct platform_device *pdev = to_platform_device(port->dev);
+        int size =
+                resource_size(platform_get_resource(pdev, IORESOURCE_MEM, 0));
+
+        if (!request_mem_region(port->mapbase, size, "timb-uart"))
+                return -EBUSY;
+
+        if (port->flags & UPF_IOREMAP) {
+                port->membase = ioremap(port->mapbase, size);
+                if (port->membase == NULL) {
+                        release_mem_region(port->mapbase, size);
+                        return -ENOMEM;
+                }
+        }
+
+        return 0;
+}
+
+static irqreturn_t timbuart_handleinterrupt(int irq, void *devid)
+{
+        struct timbuart_port *uart = (struct timbuart_port *)devid;
+
+        if (ioread8(uart->port.membase + TIMBUART_IPR)) {
+                uart->last_ier = ioread8(uart->port.membase + TIMBUART_IER);
+
+                /* disable interrupts, the tasklet enables them again */
+                iowrite8(0, uart->port.membase + TIMBUART_IER);
+
+                /* fire off bottom half */
+                tasklet_schedule(&uart->tasklet);
+
+                return IRQ_HANDLED;
+        } else
+                return IRQ_NONE;
+}
+
+/*
+ * Configure/autoconfigure the port.
+ */
+static void timbuart_config_port(struct uart_port *port, int flags)
+{
+        if (flags & UART_CONFIG_TYPE) {
+                port->type = PORT_TIMBUART;
+                timbuart_request_port(port);
+        }
+}
+
+static int timbuart_verify_port(struct uart_port *port,
+        struct serial_struct *ser)
+{
+        /* we don't want the core code to modify any port params */
+        return -EINVAL;
+}
+
+static struct uart_ops timbuart_ops = {
+        .tx_empty = timbuart_tx_empty,
+        .set_mctrl = timbuart_set_mctrl,
+        .get_mctrl = timbuart_get_mctrl,
+        .stop_tx = timbuart_stop_tx,
+        .start_tx = timbuart_start_tx,
+        .flush_buffer = timbuart_flush_buffer,
+        .stop_rx = timbuart_stop_rx,
+        .enable_ms = timbuart_enable_ms,
+        .break_ctl = timbuart_break_ctl,
+        .startup = timbuart_startup,
+        .shutdown = timbuart_shutdown,
+        .set_termios = timbuart_set_termios,
+        .type = timbuart_type,
+        .release_port = timbuart_release_port,
+        .request_port = timbuart_request_port,
+        .config_port = timbuart_config_port,
+        .verify_port = timbuart_verify_port
+};
+
+static struct uart_driver timbuart_driver = {
+        .owner = THIS_MODULE,
+        .driver_name = "timberdale_uart",
+        .dev_name = "ttyTU",
+        .major = TIMBUART_MAJOR,
+        .minor = TIMBUART_MINOR,
+        .nr = 1
+};
+
+static int timbuart_probe(struct platform_device *dev)
+{
+        int err;
+        struct timbuart_port *uart;
+        struct resource *iomem;
+
+        dev_dbg(&dev->dev, "%s\n", __func__);
+
+        uart = kzalloc(sizeof(*uart), GFP_KERNEL);
+        if (!uart) {
+                err = -EINVAL;
+                goto err_mem;
+        }
+
+        uart->usedma = 0;
+
+        uart->port.uartclk = 3250000 * 16;
+        uart->port.fifosize  = TIMBUART_FIFO_SIZE;
+        uart->port.regshift  = 2;
+        uart->port.iotype  = UPIO_MEM;
+        uart->port.ops = &timbuart_ops;
+        uart->port.irq = 0;
+        uart->port.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP;
+        uart->port.line  = 0;
+        uart->port.dev  = &dev->dev;
+
+        iomem = platform_get_resource(dev, IORESOURCE_MEM, 0);
+        if (!iomem) {
+                err = -ENOMEM;
+                goto err_register;
+        }
+        uart->port.mapbase = iomem->start;
+        uart->port.membase = NULL;
+
+        uart->port.irq = platform_get_irq(dev, 0);
+        if (uart->port.irq < 0) {
+                err = -EINVAL;
+                goto err_register;
+        }
+
+        tasklet_init(&uart->tasklet, timbuart_tasklet, (unsigned long)uart);
+
+        err = uart_register_driver(&timbuart_driver);
+        if (err)
+                goto err_register;
+
+        err = uart_add_one_port(&timbuart_driver, &uart->port);
+        if (err)
+                goto err_add_port;
+
+        platform_set_drvdata(dev, uart);
+
+        return 0;
+
+err_add_port:
+        uart_unregister_driver(&timbuart_driver);
+err_register:
+        kfree(uart);
+err_mem:
+        printk(KERN_ERR "timberdale: Failed to register Timberdale UART: %d\n",
+                err);
+
+        return err;
+}
+
+static int timbuart_remove(struct platform_device *dev)
+{
+        struct timbuart_port *uart = platform_get_drvdata(dev);
+
+        tasklet_kill(&uart->tasklet);
+        uart_remove_one_port(&timbuart_driver, &uart->port);
+        uart_unregister_driver(&timbuart_driver);
+        kfree(uart);
+
+        return 0;
+}
+
+static struct platform_driver timbuart_platform_driver = {
+        .driver = {
+                .name   = "timb-uart",
+                .owner  = THIS_MODULE,
+        },
+        .probe          = timbuart_probe,
+        .remove         = timbuart_remove,
+};
+
+/*--------------------------------------------------------------------------*/
+
+static int __init timbuart_init(void)
+{
+        return platform_driver_register(&timbuart_platform_driver);
+}
+
+static void __exit timbuart_exit(void)
+{
+        platform_driver_unregister(&timbuart_platform_driver);
+}
+
+module_init(timbuart_init);
+module_exit(timbuart_exit);
+
+MODULE_DESCRIPTION("Timberdale UART driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:timb-uart");
+
diff --git a/drivers/serial/timbuart.h b/drivers/serial/timbuart.h
new file mode 100644
index 000000000000..7e566766bc43
--- /dev/null
+++ b/drivers/serial/timbuart.h
@@ -0,0 +1,58 @@
+/*
+ * timbuart.c timberdale FPGA GPIO driver
+ * Copyright (c) 2009 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/* Supports:
+ * Timberdale FPGA UART
+ */
+
+#ifndef _TIMBUART_H
+#define _TIMBUART_H
+
+#define TIMBUART_FIFO_SIZE      2048
+
+#define TIMBUART_RXFIFO         0x08
+#define TIMBUART_TXFIFO         0x0c
+#define TIMBUART_IER            0x10
+#define TIMBUART_IPR            0x14
+#define TIMBUART_ISR            0x18
+#define TIMBUART_CTRL           0x1c
+#define TIMBUART_BAUDRATE       0x20
+
+#define TIMBUART_CTRL_RTS       0x01
+#define TIMBUART_CTRL_CTS       0x02
+#define TIMBUART_CTRL_FLSHTX    0x40
+#define TIMBUART_CTRL_FLSHRX    0x80
+
+#define TXBF            0x01
+#define TXBAE           0x02
+#define CTS_DELTA       0x04
+#define RXDP            0x08
+#define RXBAF           0x10
+#define RXBF            0x20
+#define RXTT            0x40
+#define RXBNAE          0x80
+#define TXBE            0x100
+
+#define RXFLAGS (RXDP | RXBAF | RXBF | RXTT | RXBNAE)
+#define TXFLAGS (TXBF | TXBAE)
+
+#define TIMBUART_MAJOR 204
+#define TIMBUART_MINOR 192
+
+#endif /* _TIMBUART_H */
+