[PATCH] ARM: 2818/1: BAST - Use platform device for SuperIO 16550s

Patch from Ben Dooks

Use platform device for the 16500 UARTs in the onboard
SuperIO controller.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

3 files changed, 0 insertions, 88 deletions

diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index e0d0a470ddfc..97034d3937fd 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -306,13 +306,6 @@ config SERIAL_S3C2410_CONSOLE
           your boot loader about how to pass options to the kernel at
           boot time.)
 
-config SERIAL_BAST_SIO
-        bool "Support for BAST SuperIO serial ports"
-        depends on ARCH_BAST && SERIAL_8250=y
-        help
-          Support for registerin the SuperIO chip on BAST board with
-          the 8250/16550 uart code.
-
 config SERIAL_DZ
         bool "DECstation DZ serial driver"
         depends on MACH_DECSTATION && MIPS32
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 65bd4381685e..11c7dc483f93 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -44,7 +44,6 @@ obj-$(CONFIG_SERIAL_LH7A40X) += serial_lh7a40x.o
 obj-$(CONFIG_SERIAL_AU1X00) += au1x00_uart.o
 obj-$(CONFIG_SERIAL_DZ) += dz.o
 obj-$(CONFIG_SERIAL_SH_SCI) += sh-sci.o
-obj-$(CONFIG_SERIAL_BAST_SIO) += bast_sio.o
 obj-$(CONFIG_SERIAL_SGI_L1_CONSOLE) += sn_console.o
 obj-$(CONFIG_SERIAL_CPM) += cpm_uart/
 obj-$(CONFIG_SERIAL_IMX) += imx.o
diff --git a/drivers/serial/bast_sio.c b/drivers/serial/bast_sio.c
deleted file mode 100644
index 2b48fab6f0c6..000000000000
--- a/drivers/serial/bast_sio.c
+++ /dev/null
@@ -1,80 +0,0 @@
-/* linux/drivers/serial/bast_sio.c
- *
- * Copyright (c) 2004 Simtec Electronics
- *   Ben Dooks <ben@simtec.co.uk>
- *
- * http://www.simtec.co.uk/products/EB2410ITX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Modifications:
- *      23-Sep-2004  BJD  Added copyright header
- *      23-Sep-2004  BJD  Added serial port remove code
-*/
-
-#include <linux/module.h>
-#include <linux/config.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/tty.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/types.h>
-
-#include <asm/io.h>
-#include <asm/serial.h>
-#include <asm/mach-types.h>
-
-#include <asm/arch/map.h>
-#include <asm/arch/irqs.h>
-#include <asm/arch/bast-map.h>
-#include <asm/arch/bast-irq.h>
-
-static int __init serial_bast_register(unsigned long port, unsigned int irq)
-{
-        struct serial_struct serial_req;
-
-        serial_req.flags      = UPF_AUTOPROBE | UPF_SHARE_IRQ;
-        serial_req.baud_base  = BASE_BAUD;
-        serial_req.irq        = irq;
-        serial_req.io_type    = UPIO_MEM;
-        serial_req.iomap_base = port;
-        serial_req.iomem_base = ioremap(port, 0x10);
-        serial_req.iomem_reg_shift = 0;
-
-        return register_serial(&serial_req);
-}
-
-#define SERIAL_BASE (S3C2410_CS2 + BAST_PA_SUPERIO)
-
-static int port[2] = { -1, -1 };
-
-static int __init serial_bast_init(void)
-{
-        if (machine_is_bast()) {
-                port[0] = serial_bast_register(SERIAL_BASE + 0x2f8, IRQ_PCSERIAL1);
-                port[1] = serial_bast_register(SERIAL_BASE + 0x3f8, IRQ_PCSERIAL2);
-        }
-
-        return 0;
-}
-
-static void __exit serial_bast_exit(void)
-{
-        if (port[0] != -1)
-                unregister_serial(port[0]);
-        if (port[1] != -1)
-                unregister_serial(port[1]);
-}
-
-
-module_init(serial_bast_init);
-module_exit(serial_bast_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Ben Dooks, ben@simtec.co.uk");
-MODULE_DESCRIPTION("BAST Onboard Serial setup");
-
-