[ARM] 5449/1: S3C: Use disable_irq_nosync() to fix boot lockups

With 2.6.30-rc1 on SMDK6410 I experience a soft lockup on bootup when
the Samsung serial driver attempts to disable the transmit interrupt
from within the transmit interrupt handler: it calls disable_irq()
which locks up due to attempting to synchronise with the running handler.
Fix this by using disable_irq_nosync().

Also make the same change in the recieve path.

Backtrace:

[<c002a914>] (__irq_svc+0x34/0x80) from [<c00696c0>] (synchr)
[<c00696c0>] (synchronize_irq+0xc/0xcc) from [<c018d434>] (s)
[<c018d434>] (s3c24xx_serial_stop_tx+0x1c/0x3c) from [<c018d)
[<c018d54c>] (s3c24xx_serial_tx_chars+0xf8/0x104) from [<c00)
[<c0068bcc>] (handle_IRQ_event+0x74/0x118) from [<c006ab04>])
[<c006ab04>] (handle_level_irq+0x100/0x118) from [<c00349c4>)
[<c00349c4>] (s3c_irq_demux_uart+0x94/0xc4) from [<c002a050>)
[<c002a050>] (_text+0x50/0x6c) from [<c002a914>] (__irq_svc+)

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 2 insertions, 2 deletions

diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c
index 41ac94872b8d..e06686ae858b 100644
--- a/drivers/serial/samsung.c
+++ b/drivers/serial/samsung.c
@@ -127,7 +127,7 @@ static void s3c24xx_serial_stop_tx(struct uart_port *port)
         struct s3c24xx_uart_port *ourport = to_ourport(port);
 
         if (tx_enabled(port)) {
-                disable_irq(ourport->tx_irq);
+                disable_irq_nosync(ourport->tx_irq);
                 tx_enabled(port) = 0;
                 if (port->flags & UPF_CONS_FLOW)
                         s3c24xx_serial_rx_enable(port);
@@ -154,7 +154,7 @@ static void s3c24xx_serial_stop_rx(struct uart_port *port)
 
         if (rx_enabled(port)) {
                 dbg("s3c24xx_serial_stop_rx: port=%p\n", port);
-                disable_irq(ourport->rx_irq);
+                disable_irq_nosync(ourport->rx_irq);
                 rx_enabled(port) = 0;
         }
 }