pcmcia: use pcmica_{read,write}_config_byte

Use pcmcia_read_config_byte and pcmcia_write_config_byte instead
of pcmcia_access_configuration_register.

CC: netdev@vger.kernel.org
CC: linux-wireless@vger.kernel.org
CC: linux-serial@vger.kernel.org
CC: Michael Buesch <mb@bu3sch.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>

1 files changed, 3 insertions, 5 deletions

diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index 2b99c7baf35b..2be8b107ed51 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -114,16 +114,14 @@ static void quirk_setup_brainboxes_0104(struct pcmcia_device *link, struct uart_
 
 static int quirk_post_ibm(struct pcmcia_device *link)
 {
-        conf_reg_t reg = { 0, CS_READ, 0x800, 0 };
+        u8 val;
         int ret;
 
-        ret = pcmcia_access_configuration_register(link, &reg);
+        ret = pcmcia_read_config_byte(link, 0x800, &val);
         if (ret)
                 goto failed;
 
-        reg.Action = CS_WRITE;
-        reg.Value = reg.Value | 1;
-        ret = pcmcia_access_configuration_register(link, &reg);
+        ret = pcmcia_write_config_byte(link, 0x800, val | 1);
         if (ret)
                 goto failed;
         return 0;