Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into for-rmk

5 files changed, 229 insertions, 115 deletions

diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 1bc00b721e9d..be95e55b228b 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -2623,6 +2623,9 @@ static struct console serial8250_console = {
 
 static int __init serial8250_console_init(void)
 {
+        if (nr_uarts > UART_NR)
+                nr_uarts = UART_NR;
+
         serial8250_isa_init_ports();
         register_console(&serial8250_console);
         return 0;
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 047c20d35a98..09f6346d38a8 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -790,7 +790,7 @@ config BFIN_UART3_CTSRTS
 
 config SERIAL_IMX
         bool "IMX serial port support"
-        depends on ARM && ARCH_IMX
+        depends on ARM && (ARCH_IMX || ARCH_MXC)
         select SERIAL_CORE
         help
           If you have a machine based on a Motorola IMX CPU you
diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
index 42be8b01a40f..6aeef22bd203 100644
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
@@ -1439,14 +1439,29 @@ static struct uart_driver atmel_uart = {
 };
 
 #ifdef CONFIG_PM
+static bool atmel_serial_clk_will_stop(void)
+{
+#ifdef CONFIG_ARCH_AT91
+        return at91_suspend_entering_slow_clock();
+#else
+        return false;
+#endif
+}
+
 static int atmel_serial_suspend(struct platform_device *pdev,
                                 pm_message_t state)
 {
         struct uart_port *port = platform_get_drvdata(pdev);
         struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
 
+        if (atmel_is_console_port(port) && console_suspend_enabled) {
+                /* Drain the TX shifter */
+                while (!(UART_GET_CSR(port) & ATMEL_US_TXEMPTY))
+                        cpu_relax();
+        }
+
         if (device_may_wakeup(&pdev->dev)
-            && !at91_suspend_entering_slow_clock())
+            && !atmel_serial_clk_will_stop())
                 enable_irq_wake(port->irq);
         else {
                 uart_suspend_port(&atmel_uart, port);
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index 5a375bf0ebf4..64acb39a51ba 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -40,6 +40,7 @@
 #include <linux/tty_flip.h>
 #include <linux/serial_core.h>
 #include <linux/serial.h>
+#include <linux/clk.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -61,6 +62,11 @@
 #define UBIR  0xa4 /* BRM Incremental Register */
 #define UBMR  0xa8 /* BRM Modulator Register */
 #define UBRC  0xac /* Baud Rate Count Register */
+#if defined CONFIG_ARCH_MX3 || defined CONFIG_ARCH_MX2
+#define ONEMS 0xb0 /* One Millisecond register */
+#define UTS   0xb4 /* UART Test Register */
+#endif
+#ifdef CONFIG_ARCH_IMX
 #define BIPR1 0xb0 /* Incremental Preset Register 1 */
 #define BIPR2 0xb4 /* Incremental Preset Register 2 */
 #define BIPR3 0xb8 /* Incremental Preset Register 3 */
@@ -70,6 +76,7 @@
 #define BMPR3 0xc8 /* BRM Modulator Register 3 */
 #define BMPR4 0xcc /* BRM Modulator Register 4 */
 #define UTS   0xd0 /* UART Test Register */
+#endif
 
 /* UART Control Register Bit Fields.*/
 #define  URXD_CHARRDY    (1<<15)
@@ -89,7 +96,12 @@
 #define  UCR1_RTSDEN     (1<<5)  /* RTS delta interrupt enable */
 #define  UCR1_SNDBRK     (1<<4)  /* Send break */
 #define  UCR1_TDMAEN     (1<<3)  /* Transmitter ready DMA enable */
+#ifdef CONFIG_ARCH_IMX
 #define  UCR1_UARTCLKEN  (1<<2)  /* UART clock enabled */
+#endif
+#if defined CONFIG_ARCH_MX3 || defined CONFIG_ARCH_MX2
+#define  UCR1_UARTCLKEN  (0)     /* not present on mx2/mx3 */
+#endif
 #define  UCR1_DOZE       (1<<1)  /* Doze */
 #define  UCR1_UARTEN     (1<<0)  /* UART enabled */
 #define  UCR2_ESCI       (1<<15) /* Escape seq interrupt enable */
@@ -163,8 +175,19 @@
 #define  UTS_SOFTRST     (1<<0)  /* Software reset */
 
 /* We've been assigned a range on the "Low-density serial ports" major */
+#ifdef CONFIG_ARCH_IMX
 #define SERIAL_IMX_MAJOR        204
 #define MINOR_START             41
+#define DEV_NAME                "ttySMX"
+#define MAX_INTERNAL_IRQ        IMX_IRQS
+#endif
+
+#if defined CONFIG_ARCH_MX3 || defined CONFIG_ARCH_MX2
+#define SERIAL_IMX_MAJOR        207
+#define MINOR_START             16
+#define DEV_NAME                "ttymxc"
+#define MAX_INTERNAL_IRQ        MXC_MAX_INT_LINES
+#endif
 
 /*
  * This determines how often we check the modem status signals
@@ -176,12 +199,15 @@
 
 #define DRIVER_NAME "IMX-uart"
 
+#define UART_NR 8
+
 struct imx_port {
         struct uart_port        port;
         struct timer_list       timer;
         unsigned int            old_status;
         int                     txirq,rxirq,rtsirq;
         int                     have_rtscts:1;
+        struct clk              *clk;
 };
 
 /*
@@ -405,6 +431,26 @@ out:
         return IRQ_HANDLED;
 }
 
+static irqreturn_t imx_int(int irq, void *dev_id)
+{
+        struct imx_port *sport = dev_id;
+        unsigned int sts;
+
+        sts = readl(sport->port.membase + USR1);
+
+        if (sts & USR1_RRDY)
+                imx_rxint(irq, dev_id);
+
+        if (sts & USR1_TRDY &&
+                        readl(sport->port.membase + UCR1) & UCR1_TXMPTYEN)
+                imx_txint(irq, dev_id);
+
+        if (sts & USR1_RTSS)
+                imx_rtsint(irq, dev_id);
+
+        return IRQ_HANDLED;
+}
+
 /*
  * Return TIOCSER_TEMT when transmitter is not busy.
  */
@@ -477,7 +523,8 @@ static int imx_setup_ufcr(struct imx_port *sport, unsigned int mode)
          * RFDIV is set such way to satisfy requested uartclk value
          */
         val = TXTL << 10 | RXTL;
-        ufcr_rfdiv = (imx_get_perclk1() + sport->port.uartclk / 2) / sport->port.uartclk;
+        ufcr_rfdiv = (clk_get_rate(sport->clk) + sport->port.uartclk / 2)
+                        / sport->port.uartclk;
 
         if(!ufcr_rfdiv)
                 ufcr_rfdiv = 1;
@@ -509,21 +556,34 @@ static int imx_startup(struct uart_port *port)
         writel(temp & ~UCR4_DREN, sport->port.membase + UCR4);
 
         /*
-         * Allocate the IRQ
+         * Allocate the IRQ(s) i.MX1 has three interrupts whereas later
+         * chips only have one interrupt.
          */
-        retval = request_irq(sport->rxirq, imx_rxint, 0,
-                             DRIVER_NAME, sport);
-        if (retval) goto error_out1;
-
-        retval = request_irq(sport->txirq, imx_txint, 0,
-                             DRIVER_NAME, sport);
-        if (retval) goto error_out2;
-
-        retval = request_irq(sport->rtsirq, imx_rtsint,
-                             (sport->rtsirq < IMX_IRQS) ? 0 :
+        if (sport->txirq > 0) {
+                retval = request_irq(sport->rxirq, imx_rxint, 0,
+                                DRIVER_NAME, sport);
+                if (retval)
+                        goto error_out1;
+
+                retval = request_irq(sport->txirq, imx_txint, 0,
+                                DRIVER_NAME, sport);
+                if (retval)
+                        goto error_out2;
+
+                retval = request_irq(sport->rtsirq, imx_rtsint,
+                             (sport->rtsirq < MAX_INTERNAL_IRQ) ? 0 :
                                IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
-                             DRIVER_NAME, sport);
-        if (retval) goto error_out3;
+                                DRIVER_NAME, sport);
+                if (retval)
+                        goto error_out3;
+        } else {
+                retval = request_irq(sport->port.irq, imx_int, 0,
+                                DRIVER_NAME, sport);
+                if (retval) {
+                        free_irq(sport->port.irq, sport);
+                        goto error_out1;
+                }
+        }
 
         /*
          * Finally, clear and enable interrupts
@@ -548,9 +608,11 @@ static int imx_startup(struct uart_port *port)
         return 0;
 
 error_out3:
-        free_irq(sport->txirq, sport);
+        if (sport->txirq)
+                free_irq(sport->txirq, sport);
 error_out2:
-        free_irq(sport->rxirq, sport);
+        if (sport->rxirq)
+                free_irq(sport->rxirq, sport);
 error_out1:
         return retval;
 }
@@ -568,9 +630,12 @@ static void imx_shutdown(struct uart_port *port)
         /*
          * Free the interrupts
          */
-        free_irq(sport->rtsirq, sport);
-        free_irq(sport->txirq, sport);
-        free_irq(sport->rxirq, sport);
+        if (sport->txirq > 0) {
+                free_irq(sport->rtsirq, sport);
+                free_irq(sport->txirq, sport);
+                free_irq(sport->rxirq, sport);
+        } else
+                free_irq(sport->port.irq, sport);
 
         /*
          * Disable all interrupts, port and break condition.
@@ -589,6 +654,7 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios,
         unsigned long flags;
         unsigned int ucr2, old_ucr1, old_txrxen, baud, quot;
         unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8;
+        unsigned int div, num, denom, ufcr;
 
         /*
          * If we don't support modem control lines, don't allow
@@ -634,7 +700,7 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios,
         /*
          * Ask the core to calculate the divisor for us.
          */
-        baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
+        baud = uart_get_baud_rate(port, termios, old, 50, port->uartclk / 16);
         quot = uart_get_divisor(port, baud);
 
         spin_lock_irqsave(&sport->port.lock, flags);
@@ -684,14 +750,41 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios,
                         sport->port.membase + UCR2);
         old_txrxen &= (UCR2_TXEN | UCR2_RXEN);
 
-        /* set the baud rate. We assume uartclk = 16 MHz
-         *
-         * baud * 16   UBIR - 1
-         * --------- = --------
-         *  uartclk    UBMR - 1
-         */
-        writel((baud / 100) - 1, sport->port.membase + UBIR);
-        writel(10000 - 1, sport->port.membase + UBMR);
+        div = sport->port.uartclk / (baud * 16);
+        if (div > 7)
+                div = 7;
+        if (!div)
+                div = 1;
+
+        num = baud;
+        denom = port->uartclk / div / 16;
+
+        /* shift num and denom right until they fit into 16 bits */
+        while (num > 0x10000 || denom > 0x10000) {
+                num >>= 1;
+                denom >>= 1;
+        }
+        if (num > 0)
+                num -= 1;
+        if (denom > 0)
+                denom -= 1;
+
+        writel(num, sport->port.membase + UBIR);
+        writel(denom, sport->port.membase + UBMR);
+
+        if (div == 7)
+                div = 6; /* 6 in RFDIV means divide by 7 */
+        else
+                div = 6 - div;
+
+        ufcr = readl(sport->port.membase + UFCR);
+        ufcr = (ufcr & (~UFCR_RFDIV)) |
+            (div << 7);
+        writel(ufcr, sport->port.membase + UFCR);
+
+#ifdef ONEMS
+        writel(sport->port.uartclk / div / 1000, sport->port.membase + ONEMS);
+#endif
 
         writel(old_ucr1, sport->port.membase + UCR1);
 
@@ -801,65 +894,7 @@ static struct uart_ops imx_pops = {
         .verify_port    = imx_verify_port,
 };
 
-static struct imx_port imx_ports[] = {
-        {
-        .txirq  = UART1_MINT_TX,
-        .rxirq  = UART1_MINT_RX,
-        .rtsirq = UART1_MINT_RTS,
-        .port   = {
-                .type           = PORT_IMX,
-                .iotype         = UPIO_MEM,
-                .membase        = (void *)IMX_UART1_BASE,
-                .mapbase        = 0x00206000,
-                .irq            = UART1_MINT_RX,
-                .uartclk        = 16000000,
-                .fifosize       = 32,
-                .flags          = UPF_BOOT_AUTOCONF,
-                .ops            = &imx_pops,
-                .line           = 0,
-        },
-        }, {
-        .txirq  = UART2_MINT_TX,
-        .rxirq  = UART2_MINT_RX,
-        .rtsirq = UART2_MINT_RTS,
-        .port   = {
-                .type           = PORT_IMX,
-                .iotype         = UPIO_MEM,
-                .membase        = (void *)IMX_UART2_BASE,
-                .mapbase        = 0x00207000,
-                .irq            = UART2_MINT_RX,
-                .uartclk        = 16000000,
-                .fifosize       = 32,
-                .flags          = UPF_BOOT_AUTOCONF,
-                .ops            = &imx_pops,
-                .line           = 1,
-        },
-        }
-};
-
-/*
- * Setup the IMX serial ports.
- * Note also that we support "console=ttySMXx" where "x" is either 0 or 1.
- * Which serial port this ends up being depends on the machine you're
- * running this kernel on.  I'm not convinced that this is a good idea,
- * but that's the way it traditionally works.
- *
- */
-static void __init imx_init_ports(void)
-{
-        static int first = 1;
-        int i;
-
-        if (!first)
-                return;
-        first = 0;
-
-        for (i = 0; i < ARRAY_SIZE(imx_ports); i++) {
-                init_timer(&imx_ports[i].timer);
-                imx_ports[i].timer.function = imx_timeout;
-                imx_ports[i].timer.data     = (unsigned long)&imx_ports[i];
-        }
-}
+static struct imx_port *imx_ports[UART_NR];
 
 #ifdef CONFIG_SERIAL_IMX_CONSOLE
 static void imx_console_putchar(struct uart_port *port, int ch)
@@ -878,7 +913,7 @@ static void imx_console_putchar(struct uart_port *port, int ch)
 static void
 imx_console_write(struct console *co, const char *s, unsigned int count)
 {
-        struct imx_port *sport = &imx_ports[co->index];
+        struct imx_port *sport = imx_ports[co->index];
         unsigned int old_ucr1, old_ucr2;
 
         /*
@@ -944,7 +979,7 @@ imx_console_get_options(struct imx_port *sport, int *baud,
                 else
                         ucfr_rfdiv = 6 - ucfr_rfdiv;
 
-                uartclk = imx_get_perclk1();
+                uartclk = clk_get_rate(sport->clk);
                 uartclk /= ucfr_rfdiv;
 
                 {       /*
@@ -984,7 +1019,7 @@ imx_console_setup(struct console *co, char *options)
          */
         if (co->index == -1 || co->index >= ARRAY_SIZE(imx_ports))
                 co->index = 0;
-        sport = &imx_ports[co->index];
+        sport = imx_ports[co->index];
 
         if (options)
                 uart_parse_options(options, &baud, &parity, &bits, &flow);
@@ -998,7 +1033,7 @@ imx_console_setup(struct console *co, char *options)
 
 static struct uart_driver imx_reg;
 static struct console imx_console = {
-        .name           = "ttySMX",
+        .name           = DEV_NAME,
         .write          = imx_console_write,
         .device         = uart_console_device,
         .setup          = imx_console_setup,
@@ -1007,14 +1042,6 @@ static struct console imx_console = {
         .data           = &imx_reg,
 };
 
-static int __init imx_rs_console_init(void)
-{
-        imx_init_ports();
-        register_console(&imx_console);
-        return 0;
-}
-console_initcall(imx_rs_console_init);
-
 #define IMX_CONSOLE     &imx_console
 #else
 #define IMX_CONSOLE     NULL
@@ -1023,7 +1050,7 @@ console_initcall(imx_rs_console_init);
 static struct uart_driver imx_reg = {
         .owner          = THIS_MODULE,
         .driver_name    = DRIVER_NAME,
-        .dev_name       = "ttySMX",
+        .dev_name       = DEV_NAME,
         .major          = SERIAL_IMX_MAJOR,
         .minor          = MINOR_START,
         .nr             = ARRAY_SIZE(imx_ports),
@@ -1050,29 +1077,98 @@ static int serial_imx_resume(struct platform_device *dev)
         return 0;
 }
 
-static int serial_imx_probe(struct platform_device *dev)
+static int serial_imx_probe(struct platform_device *pdev)
 {
+        struct imx_port *sport;
         struct imxuart_platform_data *pdata;
+        void __iomem *base;
+        int ret = 0;
+        struct resource *res;
+
+        sport = kzalloc(sizeof(*sport), GFP_KERNEL);
+        if (!sport)
+                return -ENOMEM;
 
-        imx_ports[dev->id].port.dev = &dev->dev;
+        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+        if (!res) {
+                ret = -ENODEV;
+                goto free;
+        }
+
+        base = ioremap(res->start, PAGE_SIZE);
+        if (!base) {
+                ret = -ENOMEM;
+                goto free;
+        }
+
+        sport->port.dev = &pdev->dev;
+        sport->port.mapbase = res->start;
+        sport->port.membase = base;
+        sport->port.type = PORT_IMX,
+        sport->port.iotype = UPIO_MEM;
+        sport->port.irq = platform_get_irq(pdev, 0);
+        sport->rxirq = platform_get_irq(pdev, 0);
+        sport->txirq = platform_get_irq(pdev, 1);
+        sport->rtsirq = platform_get_irq(pdev, 2);
+        sport->port.fifosize = 32;
+        sport->port.ops = &imx_pops;
+        sport->port.flags = UPF_BOOT_AUTOCONF;
+        sport->port.line = pdev->id;
+        init_timer(&sport->timer);
+        sport->timer.function = imx_timeout;
+        sport->timer.data     = (unsigned long)sport;
+
+        sport->clk = clk_get(&pdev->dev, "uart_clk");
+        if (IS_ERR(sport->clk)) {
+                ret = PTR_ERR(sport->clk);
+                goto unmap;
+        }
+        clk_enable(sport->clk);
 
-        pdata = (struct imxuart_platform_data *)dev->dev.platform_data;
+        sport->port.uartclk = clk_get_rate(sport->clk);
+
+        imx_ports[pdev->id] = sport;
+
+        pdata = pdev->dev.platform_data;
         if(pdata && (pdata->flags & IMXUART_HAVE_RTSCTS))
-                imx_ports[dev->id].have_rtscts = 1;
+                sport->have_rtscts = 1;
+
+        if (pdata->init)
+                pdata->init(pdev);
+
+        uart_add_one_port(&imx_reg, &sport->port);
+        platform_set_drvdata(pdev, &sport->port);
 
-        uart_add_one_port(&imx_reg, &imx_ports[dev->id].port);
-        platform_set_drvdata(dev, &imx_ports[dev->id]);
         return 0;
+unmap:
+        iounmap(sport->port.membase);
+free:
+        kfree(sport);
+
+        return ret;
 }
 
-static int serial_imx_remove(struct platform_device *dev)
+static int serial_imx_remove(struct platform_device *pdev)
 {
-        struct imx_port *sport = platform_get_drvdata(dev);
+        struct imxuart_platform_data *pdata;
+        struct imx_port *sport = platform_get_drvdata(pdev);
 
-        platform_set_drvdata(dev, NULL);
+        pdata = pdev->dev.platform_data;
 
-        if (sport)
+        platform_set_drvdata(pdev, NULL);
+
+        if (sport) {
                 uart_remove_one_port(&imx_reg, &sport->port);
+                clk_put(sport->clk);
+        }
+
+        clk_disable(sport->clk);
+
+        if (pdata->exit)
+                pdata->exit(pdev);
+
+        iounmap(sport->port.membase);
+        kfree(sport);
 
         return 0;
 }
@@ -1095,8 +1191,6 @@ static int __init imx_serial_init(void)
 
         printk(KERN_INFO "Serial: IMX driver\n");
 
-        imx_init_ports();
-
         ret = uart_register_driver(&imx_reg);
         if (ret)
                 return ret;
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index c9b64e73c987..42d2e108b679 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -1991,7 +1991,9 @@ struct uart_match {
 static int serial_match_port(struct device *dev, void *data)
 {
         struct uart_match *match = data;
-        dev_t devt = MKDEV(match->driver->major, match->driver->minor) + match->port->line;
+        struct tty_driver *tty_drv = match->driver->tty_driver;
+        dev_t devt = MKDEV(tty_drv->major, tty_drv->minor_start) +
+                match->port->line;
 
         return dev->devt == devt; /* Actually, only one tty per port */
 }