Merge branch 'sa1100' into devel

3 files changed, 44 insertions, 104 deletions

diff --git a/drivers/serial/bcm63xx_uart.c b/drivers/serial/bcm63xx_uart.c
index beddaa6e9069..37ad0c449937 100644
--- a/drivers/serial/bcm63xx_uart.c
+++ b/drivers/serial/bcm63xx_uart.c
@@ -242,7 +242,7 @@ static void bcm_uart_do_rx(struct uart_port *port)
          * higher than fifo size anyway since we're much faster than
          * serial port */
         max_count = 32;
-        tty = port->info->port.tty;
+        tty = port->state->port.tty;
         do {
                 unsigned int iestat, c, cstat;
                 char flag;
@@ -318,7 +318,7 @@ static void bcm_uart_do_tx(struct uart_port *port)
                 return;
         }
 
-        xmit = &port->info->xmit;
+        xmit = &port->state->xmit;
         if (uart_circ_empty(xmit))
                 goto txq_empty;
 
diff --git a/drivers/serial/of_serial.c b/drivers/serial/of_serial.c
index 02406ba6da1c..cdf172eda2e3 100644
--- a/drivers/serial/of_serial.c
+++ b/drivers/serial/of_serial.c
@@ -161,6 +161,7 @@ static int of_platform_serial_remove(struct of_device *ofdev)
 static struct of_device_id __devinitdata of_platform_serial_table[] = {
         { .type = "serial", .compatible = "ns8250",   .data = (void *)PORT_8250, },
         { .type = "serial", .compatible = "ns16450",  .data = (void *)PORT_16450, },
+        { .type = "serial", .compatible = "ns16550a", .data = (void *)PORT_16550A, },
         { .type = "serial", .compatible = "ns16550",  .data = (void *)PORT_16550, },
         { .type = "serial", .compatible = "ns16750",  .data = (void *)PORT_16750, },
         { .type = "serial", .compatible = "ns16850",  .data = (void *)PORT_16850, },
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index 7c7914f5fa02..fc413f0f8dd2 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -54,14 +54,6 @@
 
 #include "8250.h"
 
-#ifdef PCMCIA_DEBUG
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0644);
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
-static char *version = "serial_cs.c 1.134 2002/05/04 05:48:53 (David Hinds)";
-#else
-#define DEBUG(n, args...)
-#endif
 
 /*====================================================================*/
 
@@ -121,24 +113,20 @@ static void quirk_setup_brainboxes_0104(struct pcmcia_device *link, struct uart_
 static int quirk_post_ibm(struct pcmcia_device *link)
 {
         conf_reg_t reg = { 0, CS_READ, 0x800, 0 };
-        int last_ret, last_fn;
+        int ret;
+
+        ret = pcmcia_access_configuration_register(link, &reg);
+        if (ret)
+                goto failed;
 
-        last_ret = pcmcia_access_configuration_register(link, &reg);
-        if (last_ret) {
-                last_fn = AccessConfigurationRegister;
-                goto cs_failed;
-        }
         reg.Action = CS_WRITE;
         reg.Value = reg.Value | 1;
-        last_ret = pcmcia_access_configuration_register(link, &reg);
-        if (last_ret) {
-                last_fn = AccessConfigurationRegister;
-                goto cs_failed;
-        }
+        ret = pcmcia_access_configuration_register(link, &reg);
+        if (ret)
+                goto failed;
         return 0;
 
- cs_failed:
-        cs_error(link, last_fn, last_ret);
+ failed:
         return -ENODEV;
 }
 
@@ -283,7 +271,7 @@ static void serial_remove(struct pcmcia_device *link)
         struct serial_info *info = link->priv;
         int i;
 
-        DEBUG(0, "serial_release(0x%p)\n", link);
+        dev_dbg(&link->dev, "serial_release\n");
 
         /*
          * Recheck to see if the device is still configured.
@@ -334,7 +322,7 @@ static int serial_probe(struct pcmcia_device *link)
 {
         struct serial_info *info;
 
-        DEBUG(0, "serial_attach()\n");
+        dev_dbg(&link->dev, "serial_attach()\n");
 
         /* Create new serial device */
         info = kzalloc(sizeof (*info), GFP_KERNEL);
@@ -346,7 +334,6 @@ static int serial_probe(struct pcmcia_device *link)
         link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
         link->io.NumPorts1 = 8;
         link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
-        link->irq.IRQInfo1 = IRQ_LEVEL_ID;
         link->conf.Attributes = CONF_ENABLE_IRQ;
         if (do_sound) {
                 link->conf.Attributes |= CONF_ENABLE_SPKR;
@@ -370,7 +357,7 @@ static void serial_detach(struct pcmcia_device *link)
 {
         struct serial_info *info = link->priv;
 
-        DEBUG(0, "serial_detach(0x%p)\n", link);
+        dev_dbg(&link->dev, "serial_detach\n");
 
         /*
          * Ensure any outstanding scheduled tasks are completed.
@@ -399,7 +386,7 @@ static int setup_serial(struct pcmcia_device *handle, struct serial_info * info,
         port.irq = irq;
         port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ;
         port.uartclk = 1843200;
-        port.dev = &handle_to_dev(handle);
+        port.dev = &handle->dev;
         if (buggy_uart)
                 port.flags |= UPF_BUGGY_UART;
 
@@ -426,21 +413,6 @@ static int setup_serial(struct pcmcia_device *handle, struct serial_info * info,
 
 /*====================================================================*/
 
-static int
-first_tuple(struct pcmcia_device *handle, tuple_t * tuple, cisparse_t * parse)
-{
-        int i;
-        i = pcmcia_get_first_tuple(handle, tuple);
-        if (i != 0)
-                return i;
-        i = pcmcia_get_tuple_data(handle, tuple);
-        if (i != 0)
-                return i;
-        return pcmcia_parse_tuple(tuple, parse);
-}
-
-/*====================================================================*/
-
 static int simple_config_check(struct pcmcia_device *p_dev,
                                cistpl_cftable_entry_t *cf,
                                cistpl_cftable_entry_t *dflt,
@@ -522,15 +494,13 @@ static int simple_config(struct pcmcia_device *link)
 
         printk(KERN_NOTICE
                "serial_cs: no usable port range found, giving up\n");
-        cs_error(link, RequestIO, i);
         return -1;
 
 found_port:
         i = pcmcia_request_irq(link, &link->irq);
-        if (i != 0) {
-                cs_error(link, RequestIRQ, i);
+        if (i != 0)
                 link->irq.AssignedIRQ = 0;
-        }
+
         if (info->multi && (info->manfid == MANFID_3COM))
                 link->conf.ConfigIndex &= ~(0x08);
 
@@ -541,10 +511,8 @@ found_port:
                 info->quirk->config(link);
 
         i = pcmcia_request_configuration(link, &link->conf);
-        if (i != 0) {
-                cs_error(link, RequestConfiguration, i);
+        if (i != 0)
                 return -1;
-        }
         return setup_serial(link, info, link->io.BasePort1, link->irq.AssignedIRQ);
 }
 
@@ -613,7 +581,6 @@ static int multi_config(struct pcmcia_device *link)
                 /* FIXME: comment does not fit, error handling does not fit */
                 printk(KERN_NOTICE
                        "serial_cs: no usable port range found, giving up\n");
-                cs_error(link, RequestIRQ, i);
                 link->irq.AssignedIRQ = 0;
         }
 
@@ -624,10 +591,8 @@ static int multi_config(struct pcmcia_device *link)
                 info->quirk->config(link);
 
         i = pcmcia_request_configuration(link, &link->conf);
-        if (i != 0) {
-                cs_error(link, RequestConfiguration, i);
+        if (i != 0)
                 return -ENODEV;
-        }
 
         /* The Oxford Semiconductor OXCF950 cards are in fact single-port:
          * 8 registers are for the UART, the others are extra registers.
@@ -665,6 +630,25 @@ static int multi_config(struct pcmcia_device *link)
         return 0;
 }
 
+static int serial_check_for_multi(struct pcmcia_device *p_dev,
+                                  cistpl_cftable_entry_t *cf,
+                                  cistpl_cftable_entry_t *dflt,
+                                  unsigned int vcc,
+                                  void *priv_data)
+{
+        struct serial_info *info = p_dev->priv;
+
+        if ((cf->io.nwin == 1) && (cf->io.win[0].len % 8 == 0))
+                info->multi = cf->io.win[0].len >> 3;
+
+        if ((cf->io.nwin == 2) && (cf->io.win[0].len == 8) &&
+                (cf->io.win[1].len == 8))
+                info->multi = 2;
+
+        return 0; /* break */
+}
+
+
 /*======================================================================
 
     serial_config() is scheduled to run after a CARD_INSERTION event
@@ -676,46 +660,14 @@ static int multi_config(struct pcmcia_device *link)
 static int serial_config(struct pcmcia_device * link)
 {
         struct serial_info *info = link->priv;
-        struct serial_cfg_mem *cfg_mem;
-        tuple_t *tuple;
-        u_char *buf;
-        cisparse_t *parse;
-        cistpl_cftable_entry_t *cf;
-        int i, last_ret, last_fn;
-
-        DEBUG(0, "serial_config(0x%p)\n", link);
-
-        cfg_mem = kmalloc(sizeof(struct serial_cfg_mem), GFP_KERNEL);
-        if (!cfg_mem)
-                goto failed;
+        int i;
 
-        tuple = &cfg_mem->tuple;
-        parse = &cfg_mem->parse;
-        cf = &parse->cftable_entry;
-        buf = cfg_mem->buf;
-
-        tuple->TupleData = (cisdata_t *) buf;
-        tuple->TupleOffset = 0;
-        tuple->TupleDataMax = 255;
-        tuple->Attributes = 0;
-
-        /* Get configuration register information */
-        tuple->DesiredTuple = CISTPL_CONFIG;
-        last_ret = first_tuple(link, tuple, parse);
-        if (last_ret != 0) {
-                last_fn = ParseTuple;
-                goto cs_failed;
-        }
-        link->conf.ConfigBase = parse->config.base;
-        link->conf.Present = parse->config.rmask[0];
+        dev_dbg(&link->dev, "serial_config\n");
 
         /* Is this a compliant multifunction card? */
-        tuple->DesiredTuple = CISTPL_LONGLINK_MFC;
-        tuple->Attributes = TUPLE_RETURN_COMMON | TUPLE_RETURN_LINK;
-        info->multi = (first_tuple(link, tuple, parse) == 0);
+        info->multi = (link->socket->functions > 1);
 
         /* Is this a multiport card? */
-        tuple->DesiredTuple = CISTPL_MANFID;
         info->manfid = link->manf_id;
         info->prodid = link->card_id;
 
@@ -730,20 +682,11 @@ static int serial_config(struct pcmcia_device * link)
 
         /* Another check for dual-serial cards: look for either serial or
            multifunction cards that ask for appropriate IO port ranges */
-        tuple->DesiredTuple = CISTPL_FUNCID;
         if ((info->multi == 0) &&
             (link->has_func_id) &&
             ((link->func_id == CISTPL_FUNCID_MULTI) ||
-             (link->func_id == CISTPL_FUNCID_SERIAL))) {
-                tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY;
-                if (first_tuple(link, tuple, parse) == 0) {
-                        if ((cf->io.nwin == 1) && (cf->io.win[0].len % 8 == 0))
-                                info->multi = cf->io.win[0].len >> 3;
-                        if ((cf->io.nwin == 2) && (cf->io.win[0].len == 8) &&
-                            (cf->io.win[1].len == 8))
-                                info->multi = 2;
-                }
-        }
+             (link->func_id == CISTPL_FUNCID_SERIAL)))
+                pcmcia_loop_config(link, serial_check_for_multi, info);
 
         /*
          * Apply any multi-port quirk.
@@ -768,14 +711,10 @@ static int serial_config(struct pcmcia_device * link)
                         goto failed;
 
         link->dev_node = &info->node[0];
-        kfree(cfg_mem);
         return 0;
 
-cs_failed:
-        cs_error(link, last_fn, last_ret);
 failed:
         serial_remove(link);
-        kfree(cfg_mem);
         return -ENODEV;
 }