8250: Serial driver changes to support future Cavium OCTEON serial patches.

In order to use Cavium OCTEON specific serial i/o drivers, we first
patch the 8250 driver to use replaceable I/O functions.  Compatible
I/O functions are added for existing iotypeS.

An added benefit of this change is that it makes it easy to factor
some of the existing special cases out to board/SOC specific support
code.

The alternative is to load up 8250.c with a bunch of OCTEON specific
iotype code and bug work-arounds.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

1 files changed, 136 insertions, 58 deletions

diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 8e28750a4058..849af9d21feb 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -303,16 +303,16 @@ static const u8 au_io_out_map[] = {
 };
 
 /* sane hardware needs no mapping */
-static inline int map_8250_in_reg(struct uart_8250_port *up, int offset)
+static inline int map_8250_in_reg(struct uart_port *p, int offset)
 {
-        if (up->port.iotype != UPIO_AU)
+        if (p->iotype != UPIO_AU)
                 return offset;
         return au_io_in_map[offset];
 }
 
-static inline int map_8250_out_reg(struct uart_8250_port *up, int offset)
+static inline int map_8250_out_reg(struct uart_port *p, int offset)
 {
-        if (up->port.iotype != UPIO_AU)
+        if (p->iotype != UPIO_AU)
                 return offset;
         return au_io_out_map[offset];
 }
@@ -341,16 +341,16 @@ static const u8
                 [UART_SCR]      = 0x2c
         };
 
-static inline int map_8250_in_reg(struct uart_8250_port *up, int offset)
+static inline int map_8250_in_reg(struct uart_port *p, int offset)
 {
-        if (up->port.iotype != UPIO_RM9000)
+        if (p->iotype != UPIO_RM9000)
                 return offset;
         return regmap_in[offset];
 }
 
-static inline int map_8250_out_reg(struct uart_8250_port *up, int offset)
+static inline int map_8250_out_reg(struct uart_port *p, int offset)
 {
-        if (up->port.iotype != UPIO_RM9000)
+        if (p->iotype != UPIO_RM9000)
                 return offset;
         return regmap_out[offset];
 }
@@ -363,108 +363,170 @@ static inline int map_8250_out_reg(struct uart_8250_port *up, int offset)
 
 #endif
 
-static unsigned int serial_in(struct uart_8250_port *up, int offset)
+static unsigned int hub6_serial_in(struct uart_port *p, int offset)
 {
-        unsigned int tmp;
-        offset = map_8250_in_reg(up, offset) << up->port.regshift;
+        offset = map_8250_in_reg(p, offset) << p->regshift;
+        outb(p->hub6 - 1 + offset, p->iobase);
+        return inb(p->iobase + 1);
+}
 
-        switch (up->port.iotype) {
-        case UPIO_HUB6:
-                outb(up->port.hub6 - 1 + offset, up->port.iobase);
-                return inb(up->port.iobase + 1);
+static void hub6_serial_out(struct uart_port *p, int offset, int value)
+{
+        offset = map_8250_out_reg(p, offset) << p->regshift;
+        outb(p->hub6 - 1 + offset, p->iobase);
+        outb(value, p->iobase + 1);
+}
 
-        case UPIO_MEM:
-        case UPIO_DWAPB:
-                return readb(up->port.membase + offset);
+static unsigned int mem_serial_in(struct uart_port *p, int offset)
+{
+        offset = map_8250_in_reg(p, offset) << p->regshift;
+        return readb(p->membase + offset);
+}
 
-        case UPIO_RM9000:
-        case UPIO_MEM32:
-                return readl(up->port.membase + offset);
+static void mem_serial_out(struct uart_port *p, int offset, int value)
+{
+        offset = map_8250_out_reg(p, offset) << p->regshift;
+        writeb(value, p->membase + offset);
+}
+
+static void mem32_serial_out(struct uart_port *p, int offset, int value)
+{
+        offset = map_8250_out_reg(p, offset) << p->regshift;
+        writel(value, p->membase + offset);
+}
+
+static unsigned int mem32_serial_in(struct uart_port *p, int offset)
+{
+        offset = map_8250_in_reg(p, offset) << p->regshift;
+        return readl(p->membase + offset);
+}
 
 #ifdef CONFIG_SERIAL_8250_AU1X00
-        case UPIO_AU:
-                return __raw_readl(up->port.membase + offset);
+static unsigned int au_serial_in(struct uart_port *p, int offset)
+{
+        offset = map_8250_in_reg(p, offset) << p->regshift;
+        return __raw_readl(p->membase + offset);
+}
+
+static void au_serial_out(struct uart_port *p, int offset, int value)
+{
+        offset = map_8250_out_reg(p, offset) << p->regshift;
+        __raw_writel(value, p->membase + offset);
+}
 #endif
 
-        case UPIO_TSI:
-                if (offset == UART_IIR) {
-                        tmp = readl(up->port.membase + (UART_IIR & ~3));
-                        return (tmp >> 16) & 0xff; /* UART_IIR % 4 == 2 */
-                } else
-                        return readb(up->port.membase + offset);
+static unsigned int tsi_serial_in(struct uart_port *p, int offset)
+{
+        unsigned int tmp;
+        offset = map_8250_in_reg(p, offset) << p->regshift;
+        if (offset == UART_IIR) {
+                tmp = readl(p->membase + (UART_IIR & ~3));
+                return (tmp >> 16) & 0xff; /* UART_IIR % 4 == 2 */
+        } else
+                return readb(p->membase + offset);
+}
 
-        default:
-                return inb(up->port.iobase + offset);
-        }
+static void tsi_serial_out(struct uart_port *p, int offset, int value)
+{
+        offset = map_8250_out_reg(p, offset) << p->regshift;
+        if (!((offset == UART_IER) && (value & UART_IER_UUE)))
+                writeb(value, p->membase + offset);
 }
 
-static void
-serial_out(struct uart_8250_port *up, int offset, int value)
+static void dwapb_serial_out(struct uart_port *p, int offset, int value)
 {
-        /* Save the offset before it's remapped */
         int save_offset = offset;
-        offset = map_8250_out_reg(up, offset) << up->port.regshift;
+        offset = map_8250_out_reg(p, offset) << p->regshift;
+        /* Save the LCR value so it can be re-written when a
+         * Busy Detect interrupt occurs. */
+        if (save_offset == UART_LCR) {
+                struct uart_8250_port *up = (struct uart_8250_port *)p;
+                up->lcr = value;
+        }
+        writeb(value, p->membase + offset);
+        /* Read the IER to ensure any interrupt is cleared before
+         * returning from ISR. */
+        if (save_offset == UART_TX || save_offset == UART_IER)
+                value = p->serial_in(p, UART_IER);
+}
 
-        switch (up->port.iotype) {
+static unsigned int io_serial_in(struct uart_port *p, int offset)
+{
+        offset = map_8250_in_reg(p, offset) << p->regshift;
+        return inb(p->iobase + offset);
+}
+
+static void io_serial_out(struct uart_port *p, int offset, int value)
+{
+        offset = map_8250_out_reg(p, offset) << p->regshift;
+        outb(value, p->iobase + offset);
+}
+
+static void set_io_from_upio(struct uart_port *p)
+{
+        switch (p->iotype) {
         case UPIO_HUB6:
-                outb(up->port.hub6 - 1 + offset, up->port.iobase);
-                outb(value, up->port.iobase + 1);
+                p->serial_in = hub6_serial_in;
+                p->serial_out = hub6_serial_out;
                 break;
 
         case UPIO_MEM:
-                writeb(value, up->port.membase + offset);
+                p->serial_in = mem_serial_in;
+                p->serial_out = mem_serial_out;
                 break;
 
         case UPIO_RM9000:
         case UPIO_MEM32:
-                writel(value, up->port.membase + offset);
+                p->serial_in = mem32_serial_in;
+                p->serial_out = mem32_serial_out;
                 break;
 
 #ifdef CONFIG_SERIAL_8250_AU1X00
         case UPIO_AU:
-                __raw_writel(value, up->port.membase + offset);
+                p->serial_in = au_serial_in;
+                p->serial_out = au_serial_out;
                 break;
 #endif
         case UPIO_TSI:
-                if (!((offset == UART_IER) && (value & UART_IER_UUE)))
-                        writeb(value, up->port.membase + offset);
+                p->serial_in = tsi_serial_in;
+                p->serial_out = tsi_serial_out;
                 break;
 
         case UPIO_DWAPB:
-                /* Save the LCR value so it can be re-written when a
-                 * Busy Detect interrupt occurs. */
-                if (save_offset == UART_LCR)
-                        up->lcr = value;
-                writeb(value, up->port.membase + offset);
-                /* Read the IER to ensure any interrupt is cleared before
-                 * returning from ISR. */
-                if (save_offset == UART_TX || save_offset == UART_IER)
-                        value = serial_in(up, UART_IER);
+                p->serial_in = mem_serial_in;
+                p->serial_out = dwapb_serial_out;
                 break;
 
         default:
-                outb(value, up->port.iobase + offset);
+                p->serial_in = io_serial_in;
+                p->serial_out = io_serial_out;
+                break;
         }
 }
 
 static void
 serial_out_sync(struct uart_8250_port *up, int offset, int value)
 {
-        switch (up->port.iotype) {
+        struct uart_port *p = &up->port;
+        switch (p->iotype) {
         case UPIO_MEM:
         case UPIO_MEM32:
 #ifdef CONFIG_SERIAL_8250_AU1X00
         case UPIO_AU:
 #endif
         case UPIO_DWAPB:
-                serial_out(up, offset, value);
-                serial_in(up, UART_LCR);        /* safe, no side-effects */
+                p->serial_out(p, offset, value);
+                p->serial_in(p, UART_LCR);      /* safe, no side-effects */
                 break;
         default:
-                serial_out(up, offset, value);
+                p->serial_out(p, offset, value);
         }
 }
 
+#define serial_in(up, offset)           \
+        (up->port.serial_in(&(up)->port, (offset)))
+#define serial_out(up, offset, value)   \
+        (up->port.serial_out(&(up)->port, (offset), (value)))
 /*
  * We used to support using pause I/O for certain machines.  We
  * haven't supported this for a while, but just in case it's badly
@@ -2576,6 +2638,7 @@ static void __init serial8250_isa_init_ports(void)
                 up->port.membase  = old_serial_port[i].iomem_base;
                 up->port.iotype   = old_serial_port[i].io_type;
                 up->port.regshift = old_serial_port[i].iomem_reg_shift;
+                set_io_from_upio(&up->port);
                 if (share_irqs)
                         up->port.flags |= UPF_SHARE_IRQ;
         }
@@ -2769,6 +2832,13 @@ int __init early_serial_setup(struct uart_port *port)
         p->flags        = port->flags;
         p->mapbase      = port->mapbase;
         p->private_data = port->private_data;
+
+        set_io_from_upio(p);
+        if (port->serial_in)
+                p->serial_in = port->serial_in;
+        if (port->serial_out)
+                p->serial_out = port->serial_out;
+
         return 0;
 }
 
@@ -2833,6 +2903,8 @@ static int __devinit serial8250_probe(struct platform_device *dev)
                 port.mapbase            = p->mapbase;
                 port.hub6               = p->hub6;
                 port.private_data       = p->private_data;
+                port.serial_in          = p->serial_in;
+                port.serial_out         = p->serial_out;
                 port.dev                = &dev->dev;
                 if (share_irqs)
                         port.flags |= UPF_SHARE_IRQ;
@@ -2986,6 +3058,12 @@ int serial8250_register_port(struct uart_port *port)
                 uart->port.private_data = port->private_data;
                 if (port->dev)
                         uart->port.dev = port->dev;
+                set_io_from_upio(&uart->port);
+                /* Possibly override default I/O functions.  */
+                if (port->serial_in)
+                        uart->port.serial_in = port->serial_in;
+                if (port->serial_out)
+                        uart->port.serial_out = port->serial_out;
 
                 ret = uart_add_one_port(&serial8250_reg, &uart->port);
                 if (ret == 0)