aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/serial/ucc_uart.c
diff options
context:
space:
mode:
authorTimur Tabi <timur@freescale.com>2008-01-15 10:56:13 -0500
committerKumar Gala <galak@kernel.crashing.org>2008-01-23 20:34:12 -0500
commitd7584ed2b994a572326650b0c4d2c25961e6f49d (patch)
tree6de7ffefe6bf4394b3a10f5e87b3b6b0dd44d52d /drivers/serial/ucc_uart.c
parent845cf505cebd159b57b3ae3b25e9ad0eb036f9ab (diff)
[POWERPC] qe-uart: add support for Freescale QUICCEngine UART
Add file ucc_uart.c, a serial device driver for the Freescale QUICCEngine. Update the Kconfig and Makefile accordingly. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Diffstat (limited to 'drivers/serial/ucc_uart.c')
-rw-r--r--drivers/serial/ucc_uart.c1514
1 files changed, 1514 insertions, 0 deletions
diff --git a/drivers/serial/ucc_uart.c b/drivers/serial/ucc_uart.c
new file mode 100644
index 000000000000..e0994f061001
--- /dev/null
+++ b/drivers/serial/ucc_uart.c
@@ -0,0 +1,1514 @@
1/*
2 * Freescale QUICC Engine UART device driver
3 *
4 * Author: Timur Tabi <timur@freescale.com>
5 *
6 * Copyright 2007 Freescale Semiconductor, Inc. This file is licensed under
7 * the terms of the GNU General Public License version 2. This program
8 * is licensed "as is" without any warranty of any kind, whether express
9 * or implied.
10 *
11 * This driver adds support for UART devices via Freescale's QUICC Engine
12 * found on some Freescale SOCs.
13 *
14 * If Soft-UART support is needed but not already present, then this driver
15 * will request and upload the "Soft-UART" microcode upon probe. The
16 * filename of the microcode should be fsl_qe_ucode_uart_X_YZ.bin, where "X"
17 * is the name of the SOC (e.g. 8323), and YZ is the revision of the SOC,
18 * (e.g. "11" for 1.1).
19 */
20
21#include <linux/module.h>
22#include <linux/serial.h>
23#include <linux/serial_core.h>
24#include <linux/io.h>
25#include <linux/of_platform.h>
26#include <linux/dma-mapping.h>
27
28#include <linux/fs_uart_pd.h>
29#include <asm/ucc_slow.h>
30
31#include <linux/firmware.h>
32#include <asm/reg.h>
33
34/*
35 * The GUMR flag for Soft UART. This would normally be defined in qe.h,
36 * but Soft-UART is a hack and we want to keep everything related to it in
37 * this file.
38 */
39#define UCC_SLOW_GUMR_H_SUART 0x00004000 /* Soft-UART */
40
41/*
42 * soft_uart is 1 if we need to use Soft-UART mode
43 */
44static int soft_uart;
45/*
46 * firmware_loaded is 1 if the firmware has been loaded, 0 otherwise.
47 */
48static int firmware_loaded;
49
50/* Enable this macro to configure all serial ports in internal loopback
51 mode */
52/* #define LOOPBACK */
53
54/* The major and minor device numbers are defined in
55 * http://www.lanana.org/docs/device-list/devices-2.6+.txt. For the QE
56 * UART, we have major number 204 and minor numbers 46 - 49, which are the
57 * same as for the CPM2. This decision was made because no Freescale part
58 * has both a CPM and a QE.
59 */
60#define SERIAL_QE_MAJOR 204
61#define SERIAL_QE_MINOR 46
62
63/* Since we only have minor numbers 46 - 49, there is a hard limit of 4 ports */
64#define UCC_MAX_UART 4
65
66/* The number of buffer descriptors for receiving characters. */
67#define RX_NUM_FIFO 4
68
69/* The number of buffer descriptors for transmitting characters. */
70#define TX_NUM_FIFO 4
71
72/* The maximum size of the character buffer for a single RX BD. */
73#define RX_BUF_SIZE 32
74
75/* The maximum size of the character buffer for a single TX BD. */
76#define TX_BUF_SIZE 32
77
78/*
79 * The number of jiffies to wait after receiving a close command before the
80 * device is actually closed. This allows the last few characters to be
81 * sent over the wire.
82 */
83#define UCC_WAIT_CLOSING 100
84
85struct ucc_uart_pram {
86 struct ucc_slow_pram common;
87 u8 res1[8]; /* reserved */
88 __be16 maxidl; /* Maximum idle chars */
89 __be16 idlc; /* temp idle counter */
90 __be16 brkcr; /* Break count register */
91 __be16 parec; /* receive parity error counter */
92 __be16 frmec; /* receive framing error counter */
93 __be16 nosec; /* receive noise counter */
94 __be16 brkec; /* receive break condition counter */
95 __be16 brkln; /* last received break length */
96 __be16 uaddr[2]; /* UART address character 1 & 2 */
97 __be16 rtemp; /* Temp storage */
98 __be16 toseq; /* Transmit out of sequence char */
99 __be16 cchars[8]; /* control characters 1-8 */
100 __be16 rccm; /* receive control character mask */
101 __be16 rccr; /* receive control character register */
102 __be16 rlbc; /* receive last break character */
103 __be16 res2; /* reserved */
104 __be32 res3; /* reserved, should be cleared */
105 u8 res4; /* reserved, should be cleared */
106 u8 res5[3]; /* reserved, should be cleared */
107 __be32 res6; /* reserved, should be cleared */
108 __be32 res7; /* reserved, should be cleared */
109 __be32 res8; /* reserved, should be cleared */
110 __be32 res9; /* reserved, should be cleared */
111 __be32 res10; /* reserved, should be cleared */
112 __be32 res11; /* reserved, should be cleared */
113 __be32 res12; /* reserved, should be cleared */
114 __be32 res13; /* reserved, should be cleared */
115/* The rest is for Soft-UART only */
116 __be16 supsmr; /* 0x90, Shadow UPSMR */
117 __be16 res92; /* 0x92, reserved, initialize to 0 */
118 __be32 rx_state; /* 0x94, RX state, initialize to 0 */
119 __be32 rx_cnt; /* 0x98, RX count, initialize to 0 */
120 u8 rx_length; /* 0x9C, Char length, set to 1+CL+PEN+1+SL */
121 u8 rx_bitmark; /* 0x9D, reserved, initialize to 0 */
122 u8 rx_temp_dlst_qe; /* 0x9E, reserved, initialize to 0 */
123 u8 res14[0xBC - 0x9F]; /* reserved */
124 __be32 dump_ptr; /* 0xBC, Dump pointer */
125 __be32 rx_frame_rem; /* 0xC0, reserved, initialize to 0 */
126 u8 rx_frame_rem_size; /* 0xC4, reserved, initialize to 0 */
127 u8 tx_mode; /* 0xC5, mode, 0=AHDLC, 1=UART */
128 __be16 tx_state; /* 0xC6, TX state */
129 u8 res15[0xD0 - 0xC8]; /* reserved */
130 __be32 resD0; /* 0xD0, reserved, initialize to 0 */
131 u8 resD4; /* 0xD4, reserved, initialize to 0 */
132 __be16 resD5; /* 0xD5, reserved, initialize to 0 */
133} __attribute__ ((packed));
134
135/* SUPSMR definitions, for Soft-UART only */
136#define UCC_UART_SUPSMR_SL 0x8000
137#define UCC_UART_SUPSMR_RPM_MASK 0x6000
138#define UCC_UART_SUPSMR_RPM_ODD 0x0000
139#define UCC_UART_SUPSMR_RPM_LOW 0x2000
140#define UCC_UART_SUPSMR_RPM_EVEN 0x4000
141#define UCC_UART_SUPSMR_RPM_HIGH 0x6000
142#define UCC_UART_SUPSMR_PEN 0x1000
143#define UCC_UART_SUPSMR_TPM_MASK 0x0C00
144#define UCC_UART_SUPSMR_TPM_ODD 0x0000
145#define UCC_UART_SUPSMR_TPM_LOW 0x0400
146#define UCC_UART_SUPSMR_TPM_EVEN 0x0800
147#define UCC_UART_SUPSMR_TPM_HIGH 0x0C00
148#define UCC_UART_SUPSMR_FRZ 0x0100
149#define UCC_UART_SUPSMR_UM_MASK 0x00c0
150#define UCC_UART_SUPSMR_UM_NORMAL 0x0000
151#define UCC_UART_SUPSMR_UM_MAN_MULTI 0x0040
152#define UCC_UART_SUPSMR_UM_AUTO_MULTI 0x00c0
153#define UCC_UART_SUPSMR_CL_MASK 0x0030
154#define UCC_UART_SUPSMR_CL_8 0x0030
155#define UCC_UART_SUPSMR_CL_7 0x0020
156#define UCC_UART_SUPSMR_CL_6 0x0010
157#define UCC_UART_SUPSMR_CL_5 0x0000
158
159#define UCC_UART_TX_STATE_AHDLC 0x00
160#define UCC_UART_TX_STATE_UART 0x01
161#define UCC_UART_TX_STATE_X1 0x00
162#define UCC_UART_TX_STATE_X16 0x80
163
164#define UCC_UART_PRAM_ALIGNMENT 0x100
165
166#define UCC_UART_SIZE_OF_BD UCC_SLOW_SIZE_OF_BD
167#define NUM_CONTROL_CHARS 8
168
169/* Private per-port data structure */
170struct uart_qe_port {
171 struct uart_port port;
172 struct ucc_slow __iomem *uccp;
173 struct ucc_uart_pram __iomem *uccup;
174 struct ucc_slow_info us_info;
175 struct ucc_slow_private *us_private;
176 struct device_node *np;
177 unsigned int ucc_num; /* First ucc is 0, not 1 */
178
179 u16 rx_nrfifos;
180 u16 rx_fifosize;
181 u16 tx_nrfifos;
182 u16 tx_fifosize;
183 int wait_closing;
184 u32 flags;
185 struct qe_bd *rx_bd_base;
186 struct qe_bd *rx_cur;
187 struct qe_bd *tx_bd_base;
188 struct qe_bd *tx_cur;
189 unsigned char *tx_buf;
190 unsigned char *rx_buf;
191 void *bd_virt; /* virtual address of the BD buffers */
192 dma_addr_t bd_dma_addr; /* bus address of the BD buffers */
193 unsigned int bd_size; /* size of BD buffer space */
194};
195
196static struct uart_driver ucc_uart_driver = {
197 .owner = THIS_MODULE,
198 .driver_name = "serial",
199 .dev_name = "ttyQE",
200 .major = SERIAL_QE_MAJOR,
201 .minor = SERIAL_QE_MINOR,
202 .nr = UCC_MAX_UART,
203};
204
205/*
206 * Virtual to physical address translation.
207 *
208 * Given the virtual address for a character buffer, this function returns
209 * the physical (DMA) equivalent.
210 */
211static inline dma_addr_t cpu2qe_addr(void *addr, struct uart_qe_port *qe_port)
212{
213 if (likely((addr >= qe_port->bd_virt)) &&
214 (addr < (qe_port->bd_virt + qe_port->bd_size)))
215 return qe_port->bd_dma_addr + (addr - qe_port->bd_virt);
216
217 /* something nasty happened */
218 printk(KERN_ERR "%s: addr=%p\n", __FUNCTION__, addr);
219 BUG();
220 return 0;
221}
222
223/*
224 * Physical to virtual address translation.
225 *
226 * Given the physical (DMA) address for a character buffer, this function
227 * returns the virtual equivalent.
228 */
229static inline void *qe2cpu_addr(dma_addr_t addr, struct uart_qe_port *qe_port)
230{
231 /* sanity check */
232 if (likely((addr >= qe_port->bd_dma_addr) &&
233 (addr < (qe_port->bd_dma_addr + qe_port->bd_size))))
234 return qe_port->bd_virt + (addr - qe_port->bd_dma_addr);
235
236 /* something nasty happened */
237 printk(KERN_ERR "%s: addr=%x\n", __FUNCTION__, addr);
238 BUG();
239 return NULL;
240}
241
242/*
243 * Return 1 if the QE is done transmitting all buffers for this port
244 *
245 * This function scans each BD in sequence. If we find a BD that is not
246 * ready (READY=1), then we return 0 indicating that the QE is still sending
247 * data. If we reach the last BD (WRAP=1), then we know we've scanned
248 * the entire list, and all BDs are done.
249 */
250static unsigned int qe_uart_tx_empty(struct uart_port *port)
251{
252 struct uart_qe_port *qe_port =
253 container_of(port, struct uart_qe_port, port);
254 struct qe_bd *bdp = qe_port->tx_bd_base;
255
256 while (1) {
257 if (in_be16(&bdp->status) & BD_SC_READY)
258 /* This BD is not done, so return "not done" */
259 return 0;
260
261 if (in_be16(&bdp->status) & BD_SC_WRAP)
262 /*
263 * This BD is done and it's the last one, so return
264 * "done"
265 */
266 return 1;
267
268 bdp++;
269 };
270}
271
272/*
273 * Set the modem control lines
274 *
275 * Although the QE can control the modem control lines (e.g. CTS), we
276 * don't need that support. This function must exist, however, otherwise
277 * the kernel will panic.
278 */
279void qe_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
280{
281}
282
283/*
284 * Get the current modem control line status
285 *
286 * Although the QE can control the modem control lines (e.g. CTS), this
287 * driver currently doesn't support that, so we always return Carrier
288 * Detect, Data Set Ready, and Clear To Send.
289 */
290static unsigned int qe_uart_get_mctrl(struct uart_port *port)
291{
292 return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
293}
294
295/*
296 * Disable the transmit interrupt.
297 *
298 * Although this function is called "stop_tx", it does not actually stop
299 * transmission of data. Instead, it tells the QE to not generate an
300 * interrupt when the UCC is finished sending characters.
301 */
302static void qe_uart_stop_tx(struct uart_port *port)
303{
304 struct uart_qe_port *qe_port =
305 container_of(port, struct uart_qe_port, port);
306
307 clrbits16(&qe_port->uccp->uccm, UCC_UART_UCCE_TX);
308}
309
310/*
311 * Transmit as many characters to the HW as possible.
312 *
313 * This function will attempt to stuff of all the characters from the
314 * kernel's transmit buffer into TX BDs.
315 *
316 * A return value of non-zero indicates that it sucessfully stuffed all
317 * characters from the kernel buffer.
318 *
319 * A return value of zero indicates that there are still characters in the
320 * kernel's buffer that have not been transmitted, but there are no more BDs
321 * available. This function should be called again after a BD has been made
322 * available.
323 */
324static int qe_uart_tx_pump(struct uart_qe_port *qe_port)
325{
326 struct qe_bd *bdp;
327 unsigned char *p;
328 unsigned int count;
329 struct uart_port *port = &qe_port->port;
330 struct circ_buf *xmit = &port->info->xmit;
331
332 bdp = qe_port->rx_cur;
333
334 /* Handle xon/xoff */
335 if (port->x_char) {
336 /* Pick next descriptor and fill from buffer */
337 bdp = qe_port->tx_cur;
338
339 p = qe2cpu_addr(bdp->buf, qe_port);
340
341 *p++ = port->x_char;
342 out_be16(&bdp->length, 1);
343 setbits16(&bdp->status, BD_SC_READY);
344 /* Get next BD. */
345 if (in_be16(&bdp->status) & BD_SC_WRAP)
346 bdp = qe_port->tx_bd_base;
347 else
348 bdp++;
349 qe_port->tx_cur = bdp;
350
351 port->icount.tx++;
352 port->x_char = 0;
353 return 1;
354 }
355
356 if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
357 qe_uart_stop_tx(port);
358 return 0;
359 }
360
361 /* Pick next descriptor and fill from buffer */
362 bdp = qe_port->tx_cur;
363
364 while (!(in_be16(&bdp->status) & BD_SC_READY) &&
365 (xmit->tail != xmit->head)) {
366 count = 0;
367 p = qe2cpu_addr(bdp->buf, qe_port);
368 while (count < qe_port->tx_fifosize) {
369 *p++ = xmit->buf[xmit->tail];
370 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
371 port->icount.tx++;
372 count++;
373 if (xmit->head == xmit->tail)
374 break;
375 }
376
377 out_be16(&bdp->length, count);
378 setbits16(&bdp->status, BD_SC_READY);
379
380 /* Get next BD. */
381 if (in_be16(&bdp->status) & BD_SC_WRAP)
382 bdp = qe_port->tx_bd_base;
383 else
384 bdp++;
385 }
386 qe_port->tx_cur = bdp;
387
388 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
389 uart_write_wakeup(port);
390
391 if (uart_circ_empty(xmit)) {
392 /* The kernel buffer is empty, so turn off TX interrupts. We
393 don't need to be told when the QE is finished transmitting
394 the data. */
395 qe_uart_stop_tx(port);
396 return 0;
397 }
398
399 return 1;
400}
401
402/*
403 * Start transmitting data
404 *
405 * This function will start transmitting any available data, if the port
406 * isn't already transmitting data.
407 */
408static void qe_uart_start_tx(struct uart_port *port)
409{
410 struct uart_qe_port *qe_port =
411 container_of(port, struct uart_qe_port, port);
412
413 /* If we currently are transmitting, then just return */
414 if (in_be16(&qe_port->uccp->uccm) & UCC_UART_UCCE_TX)
415 return;
416
417 /* Otherwise, pump the port and start transmission */
418 if (qe_uart_tx_pump(qe_port))
419 setbits16(&qe_port->uccp->uccm, UCC_UART_UCCE_TX);
420}
421
422/*
423 * Stop transmitting data
424 */
425static void qe_uart_stop_rx(struct uart_port *port)
426{
427 struct uart_qe_port *qe_port =
428 container_of(port, struct uart_qe_port, port);
429
430 clrbits16(&qe_port->uccp->uccm, UCC_UART_UCCE_RX);
431}
432
433/*
434 * Enable status change interrupts
435 *
436 * We don't support status change interrupts, but we need to define this
437 * function otherwise the kernel will panic.
438 */
439static void qe_uart_enable_ms(struct uart_port *port)
440{
441}
442
443/* Start or stop sending break signal
444 *
445 * This function controls the sending of a break signal. If break_state=1,
446 * then we start sending a break signal. If break_state=0, then we stop
447 * sending the break signal.
448 */
449static void qe_uart_break_ctl(struct uart_port *port, int break_state)
450{
451 struct uart_qe_port *qe_port =
452 container_of(port, struct uart_qe_port, port);
453
454 if (break_state)
455 ucc_slow_stop_tx(qe_port->us_private);
456 else
457 ucc_slow_restart_tx(qe_port->us_private);
458}
459
460/* ISR helper function for receiving character.
461 *
462 * This function is called by the ISR to handling receiving characters
463 */
464static void qe_uart_int_rx(struct uart_qe_port *qe_port)
465{
466 int i;
467 unsigned char ch, *cp;
468 struct uart_port *port = &qe_port->port;
469 struct tty_struct *tty = port->info->tty;
470 struct qe_bd *bdp;
471 u16 status;
472 unsigned int flg;
473
474 /* Just loop through the closed BDs and copy the characters into
475 * the buffer.
476 */
477 bdp = qe_port->rx_cur;
478 while (1) {
479 status = in_be16(&bdp->status);
480
481 /* If this one is empty, then we assume we've read them all */
482 if (status & BD_SC_EMPTY)
483 break;
484
485 /* get number of characters, and check space in RX buffer */
486 i = in_be16(&bdp->length);
487
488 /* If we don't have enough room in RX buffer for the entire BD,
489 * then we try later, which will be the next RX interrupt.
490 */
491 if (tty_buffer_request_room(tty, i) < i) {
492 dev_dbg(port->dev, "ucc-uart: no room in RX buffer\n");
493 return;
494 }
495
496 /* get pointer */
497 cp = qe2cpu_addr(bdp->buf, qe_port);
498
499 /* loop through the buffer */
500 while (i-- > 0) {
501 ch = *cp++;
502 port->icount.rx++;
503 flg = TTY_NORMAL;
504
505 if (!i && status &
506 (BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV))
507 goto handle_error;
508 if (uart_handle_sysrq_char(port, ch))
509 continue;
510
511error_return:
512 tty_insert_flip_char(tty, ch, flg);
513
514 }
515
516 /* This BD is ready to be used again. Clear status. get next */
517 clrsetbits_be16(&bdp->status, BD_SC_BR | BD_SC_FR | BD_SC_PR |
518 BD_SC_OV | BD_SC_ID, BD_SC_EMPTY);
519 if (in_be16(&bdp->status) & BD_SC_WRAP)
520 bdp = qe_port->rx_bd_base;
521 else
522 bdp++;
523
524 }
525
526 /* Write back buffer pointer */
527 qe_port->rx_cur = bdp;
528
529 /* Activate BH processing */
530 tty_flip_buffer_push(tty);
531
532 return;
533
534 /* Error processing */
535
536handle_error:
537 /* Statistics */
538 if (status & BD_SC_BR)
539 port->icount.brk++;
540 if (status & BD_SC_PR)
541 port->icount.parity++;
542 if (status & BD_SC_FR)
543 port->icount.frame++;
544 if (status & BD_SC_OV)
545 port->icount.overrun++;
546
547 /* Mask out ignored conditions */
548 status &= port->read_status_mask;
549
550 /* Handle the remaining ones */
551 if (status & BD_SC_BR)
552 flg = TTY_BREAK;
553 else if (status & BD_SC_PR)
554 flg = TTY_PARITY;
555 else if (status & BD_SC_FR)
556 flg = TTY_FRAME;
557
558 /* Overrun does not affect the current character ! */
559 if (status & BD_SC_OV)
560 tty_insert_flip_char(tty, 0, TTY_OVERRUN);
561#ifdef SUPPORT_SYSRQ
562 port->sysrq = 0;
563#endif
564 goto error_return;
565}
566
567/* Interrupt handler
568 *
569 * This interrupt handler is called after a BD is processed.
570 */
571static irqreturn_t qe_uart_int(int irq, void *data)
572{
573 struct uart_qe_port *qe_port = (struct uart_qe_port *) data;
574 struct ucc_slow __iomem *uccp = qe_port->uccp;
575 u16 events;
576
577 /* Clear the interrupts */
578 events = in_be16(&uccp->ucce);
579 out_be16(&uccp->ucce, events);
580
581 if (events & UCC_UART_UCCE_BRKE)
582 uart_handle_break(&qe_port->port);
583
584 if (events & UCC_UART_UCCE_RX)
585 qe_uart_int_rx(qe_port);
586
587 if (events & UCC_UART_UCCE_TX)
588 qe_uart_tx_pump(qe_port);
589
590 return events ? IRQ_HANDLED : IRQ_NONE;
591}
592
593/* Initialize buffer descriptors
594 *
595 * This function initializes all of the RX and TX buffer descriptors.
596 */
597static void qe_uart_initbd(struct uart_qe_port *qe_port)
598{
599 int i;
600 void *bd_virt;
601 struct qe_bd *bdp;
602
603 /* Set the physical address of the host memory buffers in the buffer
604 * descriptors, and the virtual address for us to work with.
605 */
606 bd_virt = qe_port->bd_virt;
607 bdp = qe_port->rx_bd_base;
608 qe_port->rx_cur = qe_port->rx_bd_base;
609 for (i = 0; i < (qe_port->rx_nrfifos - 1); i++) {
610 out_be16(&bdp->status, BD_SC_EMPTY | BD_SC_INTRPT);
611 out_be32(&bdp->buf, cpu2qe_addr(bd_virt, qe_port));
612 out_be16(&bdp->length, 0);
613 bd_virt += qe_port->rx_fifosize;
614 bdp++;
615 }
616
617 /* */
618 out_be16(&bdp->status, BD_SC_WRAP | BD_SC_EMPTY | BD_SC_INTRPT);
619 out_be32(&bdp->buf, cpu2qe_addr(bd_virt, qe_port));
620 out_be16(&bdp->length, 0);
621
622 /* Set the physical address of the host memory
623 * buffers in the buffer descriptors, and the
624 * virtual address for us to work with.
625 */
626 bd_virt = qe_port->bd_virt +
627 L1_CACHE_ALIGN(qe_port->rx_nrfifos * qe_port->rx_fifosize);
628 qe_port->tx_cur = qe_port->tx_bd_base;
629 bdp = qe_port->tx_bd_base;
630 for (i = 0; i < (qe_port->tx_nrfifos - 1); i++) {
631 out_be16(&bdp->status, BD_SC_INTRPT);
632 out_be32(&bdp->buf, cpu2qe_addr(bd_virt, qe_port));
633 out_be16(&bdp->length, 0);
634 bd_virt += qe_port->tx_fifosize;
635 bdp++;
636 }
637
638 /* Loopback requires the preamble bit to be set on the first TX BD */
639#ifdef LOOPBACK
640 setbits16(&qe_port->tx_cur->status, BD_SC_P);
641#endif
642
643 out_be16(&bdp->status, BD_SC_WRAP | BD_SC_INTRPT);
644 out_be32(&bdp->buf, cpu2qe_addr(bd_virt, qe_port));
645 out_be16(&bdp->length, 0);
646}
647
648/*
649 * Initialize a UCC for UART.
650 *
651 * This function configures a given UCC to be used as a UART device. Basic
652 * UCC initialization is handled in qe_uart_request_port(). This function
653 * does all the UART-specific stuff.
654 */
655static void qe_uart_init_ucc(struct uart_qe_port *qe_port)
656{
657 u32 cecr_subblock;
658 struct ucc_slow __iomem *uccp = qe_port->uccp;
659 struct ucc_uart_pram *uccup = qe_port->uccup;
660
661 unsigned int i;
662
663 /* First, disable TX and RX in the UCC */
664 ucc_slow_disable(qe_port->us_private, COMM_DIR_RX_AND_TX);
665
666 /* Program the UCC UART parameter RAM */
667 out_8(&uccup->common.rbmr, UCC_BMR_GBL | UCC_BMR_BO_BE);
668 out_8(&uccup->common.tbmr, UCC_BMR_GBL | UCC_BMR_BO_BE);
669 out_be16(&uccup->common.mrblr, qe_port->rx_fifosize);
670 out_be16(&uccup->maxidl, 0x10);
671 out_be16(&uccup->brkcr, 1);
672 out_be16(&uccup->parec, 0);
673 out_be16(&uccup->frmec, 0);
674 out_be16(&uccup->nosec, 0);
675 out_be16(&uccup->brkec, 0);
676 out_be16(&uccup->uaddr[0], 0);
677 out_be16(&uccup->uaddr[1], 0);
678 out_be16(&uccup->toseq, 0);
679 for (i = 0; i < 8; i++)
680 out_be16(&uccup->cchars[i], 0xC000);
681 out_be16(&uccup->rccm, 0xc0ff);
682
683 /* Configure the GUMR registers for UART */
684 if (soft_uart)
685 /* Soft-UART requires a 1X multiplier for TX */
686 clrsetbits_be32(&uccp->gumr_l,
687 UCC_SLOW_GUMR_L_MODE_MASK | UCC_SLOW_GUMR_L_TDCR_MASK |
688 UCC_SLOW_GUMR_L_RDCR_MASK,
689 UCC_SLOW_GUMR_L_MODE_UART | UCC_SLOW_GUMR_L_TDCR_1 |
690 UCC_SLOW_GUMR_L_RDCR_16);
691 else
692 clrsetbits_be32(&uccp->gumr_l,
693 UCC_SLOW_GUMR_L_MODE_MASK | UCC_SLOW_GUMR_L_TDCR_MASK |
694 UCC_SLOW_GUMR_L_RDCR_MASK,
695 UCC_SLOW_GUMR_L_MODE_UART | UCC_SLOW_GUMR_L_TDCR_16 |
696 UCC_SLOW_GUMR_L_RDCR_16);
697
698 clrsetbits_be32(&uccp->gumr_h, UCC_SLOW_GUMR_H_RFW,
699 UCC_SLOW_GUMR_H_TRX | UCC_SLOW_GUMR_H_TTX);
700
701#ifdef LOOPBACK
702 clrsetbits_be32(&uccp->gumr_l, UCC_SLOW_GUMR_L_DIAG_MASK,
703 UCC_SLOW_GUMR_L_DIAG_LOOP);
704 clrsetbits_be32(&uccp->gumr_h,
705 UCC_SLOW_GUMR_H_CTSP | UCC_SLOW_GUMR_H_RSYN,
706 UCC_SLOW_GUMR_H_CDS);
707#endif
708
709 /* Enable rx interrupts and clear all pending events. */
710 out_be16(&uccp->uccm, 0);
711 out_be16(&uccp->ucce, 0xffff);
712 out_be16(&uccp->udsr, 0x7e7e);
713
714 /* Initialize UPSMR */
715 out_be16(&uccp->upsmr, 0);
716
717 if (soft_uart) {
718 out_be16(&uccup->supsmr, 0x30);
719 out_be16(&uccup->res92, 0);
720 out_be32(&uccup->rx_state, 0);
721 out_be32(&uccup->rx_cnt, 0);
722 out_8(&uccup->rx_bitmark, 0);
723 out_8(&uccup->rx_length, 10);
724 out_be32(&uccup->dump_ptr, 0x4000);
725 out_8(&uccup->rx_temp_dlst_qe, 0);
726 out_be32(&uccup->rx_frame_rem, 0);
727 out_8(&uccup->rx_frame_rem_size, 0);
728 /* Soft-UART requires TX to be 1X */
729 out_8(&uccup->tx_mode,
730 UCC_UART_TX_STATE_UART | UCC_UART_TX_STATE_X1);
731 out_be16(&uccup->tx_state, 0);
732 out_8(&uccup->resD4, 0);
733 out_be16(&uccup->resD5, 0);
734
735 /* Set UART mode.
736 * Enable receive and transmit.
737 */
738
739 /* From the microcode errata:
740 * 1.GUMR_L register, set mode=0010 (QMC).
741 * 2.Set GUMR_H[17] bit. (UART/AHDLC mode).
742 * 3.Set GUMR_H[19:20] (Transparent mode)
743 * 4.Clear GUMR_H[26] (RFW)
744 * ...
745 * 6.Receiver must use 16x over sampling
746 */
747 clrsetbits_be32(&uccp->gumr_l,
748 UCC_SLOW_GUMR_L_MODE_MASK | UCC_SLOW_GUMR_L_TDCR_MASK |
749 UCC_SLOW_GUMR_L_RDCR_MASK,
750 UCC_SLOW_GUMR_L_MODE_QMC | UCC_SLOW_GUMR_L_TDCR_16 |
751 UCC_SLOW_GUMR_L_RDCR_16);
752
753 clrsetbits_be32(&uccp->gumr_h,
754 UCC_SLOW_GUMR_H_RFW | UCC_SLOW_GUMR_H_RSYN,
755 UCC_SLOW_GUMR_H_SUART | UCC_SLOW_GUMR_H_TRX |
756 UCC_SLOW_GUMR_H_TTX | UCC_SLOW_GUMR_H_TFL);
757
758#ifdef LOOPBACK
759 clrsetbits_be32(&uccp->gumr_l, UCC_SLOW_GUMR_L_DIAG_MASK,
760 UCC_SLOW_GUMR_L_DIAG_LOOP);
761 clrbits32(&uccp->gumr_h, UCC_SLOW_GUMR_H_CTSP |
762 UCC_SLOW_GUMR_H_CDS);
763#endif
764
765 cecr_subblock = ucc_slow_get_qe_cr_subblock(qe_port->ucc_num);
766 qe_issue_cmd(QE_INIT_TX_RX, cecr_subblock,
767 QE_CR_PROTOCOL_UNSPECIFIED, 0);
768 }
769}
770
771/*
772 * Initialize the port.
773 */
774static int qe_uart_startup(struct uart_port *port)
775{
776 struct uart_qe_port *qe_port =
777 container_of(port, struct uart_qe_port, port);
778 int ret;
779
780 /*
781 * If we're using Soft-UART mode, then we need to make sure the
782 * firmware has been uploaded first.
783 */
784 if (soft_uart && !firmware_loaded) {
785 dev_err(port->dev, "Soft-UART firmware not uploaded\n");
786 return -ENODEV;
787 }
788
789 qe_uart_initbd(qe_port);
790 qe_uart_init_ucc(qe_port);
791
792 /* Install interrupt handler. */
793 ret = request_irq(port->irq, qe_uart_int, IRQF_SHARED, "ucc-uart",
794 qe_port);
795 if (ret) {
796 dev_err(port->dev, "could not claim IRQ %u\n", port->irq);
797 return ret;
798 }
799
800 /* Startup rx-int */
801 setbits16(&qe_port->uccp->uccm, UCC_UART_UCCE_RX);
802 ucc_slow_enable(qe_port->us_private, COMM_DIR_RX_AND_TX);
803
804 return 0;
805}
806
807/*
808 * Shutdown the port.
809 */
810static void qe_uart_shutdown(struct uart_port *port)
811{
812 struct uart_qe_port *qe_port =
813 container_of(port, struct uart_qe_port, port);
814 struct ucc_slow __iomem *uccp = qe_port->uccp;
815 unsigned int timeout = 20;
816
817 /* Disable RX and TX */
818
819 /* Wait for all the BDs marked sent */
820 while (!qe_uart_tx_empty(port)) {
821 if (!--timeout) {
822 dev_warn(port->dev, "shutdown timeout\n");
823 break;
824 }
825 set_current_state(TASK_UNINTERRUPTIBLE);
826 schedule_timeout(2);
827 }
828
829 if (qe_port->wait_closing) {
830 /* Wait a bit longer */
831 set_current_state(TASK_UNINTERRUPTIBLE);
832 schedule_timeout(qe_port->wait_closing);
833 }
834
835 /* Stop uarts */
836 ucc_slow_disable(qe_port->us_private, COMM_DIR_RX_AND_TX);
837 clrbits16(&uccp->uccm, UCC_UART_UCCE_TX | UCC_UART_UCCE_RX);
838
839 /* Shut them really down and reinit buffer descriptors */
840 ucc_slow_graceful_stop_tx(qe_port->us_private);
841 qe_uart_initbd(qe_port);
842
843 free_irq(port->irq, qe_port);
844}
845
846/*
847 * Set the serial port parameters.
848 */
849static void qe_uart_set_termios(struct uart_port *port,
850 struct ktermios *termios, struct ktermios *old)
851{
852 struct uart_qe_port *qe_port =
853 container_of(port, struct uart_qe_port, port);
854 struct ucc_slow __iomem *uccp = qe_port->uccp;
855 unsigned int baud;
856 unsigned long flags;
857 u16 upsmr = in_be16(&uccp->upsmr);
858 struct ucc_uart_pram __iomem *uccup = qe_port->uccup;
859 u16 supsmr = in_be16(&uccup->supsmr);
860 u8 char_length = 2; /* 1 + CL + PEN + 1 + SL */
861
862 /* Character length programmed into the mode register is the
863 * sum of: 1 start bit, number of data bits, 0 or 1 parity bit,
864 * 1 or 2 stop bits, minus 1.
865 * The value 'bits' counts this for us.
866 */
867
868 /* byte size */
869 upsmr &= UCC_UART_UPSMR_CL_MASK;
870 supsmr &= UCC_UART_SUPSMR_CL_MASK;
871
872 switch (termios->c_cflag & CSIZE) {
873 case CS5:
874 upsmr |= UCC_UART_UPSMR_CL_5;
875 supsmr |= UCC_UART_SUPSMR_CL_5;
876 char_length += 5;
877 break;
878 case CS6:
879 upsmr |= UCC_UART_UPSMR_CL_6;
880 supsmr |= UCC_UART_SUPSMR_CL_6;
881 char_length += 6;
882 break;
883 case CS7:
884 upsmr |= UCC_UART_UPSMR_CL_7;
885 supsmr |= UCC_UART_SUPSMR_CL_7;
886 char_length += 7;
887 break;
888 default: /* case CS8 */
889 upsmr |= UCC_UART_UPSMR_CL_8;
890 supsmr |= UCC_UART_SUPSMR_CL_8;
891 char_length += 8;
892 break;
893 }
894
895 /* If CSTOPB is set, we want two stop bits */
896 if (termios->c_cflag & CSTOPB) {
897 upsmr |= UCC_UART_UPSMR_SL;
898 supsmr |= UCC_UART_SUPSMR_SL;
899 char_length++; /* + SL */
900 }
901
902 if (termios->c_cflag & PARENB) {
903 upsmr |= UCC_UART_UPSMR_PEN;
904 supsmr |= UCC_UART_SUPSMR_PEN;
905 char_length++; /* + PEN */
906
907 if (!(termios->c_cflag & PARODD)) {
908 upsmr &= ~(UCC_UART_UPSMR_RPM_MASK |
909 UCC_UART_UPSMR_TPM_MASK);
910 upsmr |= UCC_UART_UPSMR_RPM_EVEN |
911 UCC_UART_UPSMR_TPM_EVEN;
912 supsmr &= ~(UCC_UART_SUPSMR_RPM_MASK |
913 UCC_UART_SUPSMR_TPM_MASK);
914 supsmr |= UCC_UART_SUPSMR_RPM_EVEN |
915 UCC_UART_SUPSMR_TPM_EVEN;
916 }
917 }
918
919 /*
920 * Set up parity check flag
921 */
922 port->read_status_mask = BD_SC_EMPTY | BD_SC_OV;
923 if (termios->c_iflag & INPCK)
924 port->read_status_mask |= BD_SC_FR | BD_SC_PR;
925 if (termios->c_iflag & (BRKINT | PARMRK))
926 port->read_status_mask |= BD_SC_BR;
927
928 /*
929 * Characters to ignore
930 */
931 port->ignore_status_mask = 0;
932 if (termios->c_iflag & IGNPAR)
933 port->ignore_status_mask |= BD_SC_PR | BD_SC_FR;
934 if (termios->c_iflag & IGNBRK) {
935 port->ignore_status_mask |= BD_SC_BR;
936 /*
937 * If we're ignore parity and break indicators, ignore
938 * overruns too. (For real raw support).
939 */
940 if (termios->c_iflag & IGNPAR)
941 port->ignore_status_mask |= BD_SC_OV;
942 }
943 /*
944 * !!! ignore all characters if CREAD is not set
945 */
946 if ((termios->c_cflag & CREAD) == 0)
947 port->read_status_mask &= ~BD_SC_EMPTY;
948
949 baud = uart_get_baud_rate(port, termios, old, 0, 115200);
950
951 /* Do we really need a spinlock here? */
952 spin_lock_irqsave(&port->lock, flags);
953
954 out_be16(&uccp->upsmr, upsmr);
955 if (soft_uart) {
956 out_be16(&uccup->supsmr, supsmr);
957 out_8(&uccup->rx_length, char_length);
958
959 /* Soft-UART requires a 1X multiplier for TX */
960 qe_setbrg(qe_port->us_info.rx_clock, baud, 16);
961 qe_setbrg(qe_port->us_info.tx_clock, baud, 1);
962 } else {
963 qe_setbrg(qe_port->us_info.rx_clock, baud, 16);
964 qe_setbrg(qe_port->us_info.tx_clock, baud, 16);
965 }
966
967 spin_unlock_irqrestore(&port->lock, flags);
968}
969
970/*
971 * Return a pointer to a string that describes what kind of port this is.
972 */
973static const char *qe_uart_type(struct uart_port *port)
974{
975 return "QE";
976}
977
978/*
979 * Allocate any memory and I/O resources required by the port.
980 */
981static int qe_uart_request_port(struct uart_port *port)
982{
983 int ret;
984 struct uart_qe_port *qe_port =
985 container_of(port, struct uart_qe_port, port);
986 struct ucc_slow_info *us_info = &qe_port->us_info;
987 struct ucc_slow_private *uccs;
988 unsigned int rx_size, tx_size;
989 void *bd_virt;
990 dma_addr_t bd_dma_addr = 0;
991
992 ret = ucc_slow_init(us_info, &uccs);
993 if (ret) {
994 dev_err(port->dev, "could not initialize UCC%u\n",
995 qe_port->ucc_num);
996 return ret;
997 }
998
999 qe_port->us_private = uccs;
1000 qe_port->uccp = uccs->us_regs;
1001 qe_port->uccup = (struct ucc_uart_pram *) uccs->us_pram;
1002 qe_port->rx_bd_base = uccs->rx_bd;
1003 qe_port->tx_bd_base = uccs->tx_bd;
1004
1005 /*
1006 * Allocate the transmit and receive data buffers.
1007 */
1008
1009 rx_size = L1_CACHE_ALIGN(qe_port->rx_nrfifos * qe_port->rx_fifosize);
1010 tx_size = L1_CACHE_ALIGN(qe_port->tx_nrfifos * qe_port->tx_fifosize);
1011
1012 bd_virt = dma_alloc_coherent(NULL, rx_size + tx_size, &bd_dma_addr,
1013 GFP_KERNEL);
1014 if (!bd_virt) {
1015 dev_err(port->dev, "could not allocate buffer descriptors\n");
1016 return -ENOMEM;
1017 }
1018
1019 qe_port->bd_virt = bd_virt;
1020 qe_port->bd_dma_addr = bd_dma_addr;
1021 qe_port->bd_size = rx_size + tx_size;
1022
1023 qe_port->rx_buf = bd_virt;
1024 qe_port->tx_buf = qe_port->rx_buf + rx_size;
1025
1026 return 0;
1027}
1028
1029/*
1030 * Configure the port.
1031 *
1032 * We say we're a CPM-type port because that's mostly true. Once the device
1033 * is configured, this driver operates almost identically to the CPM serial
1034 * driver.
1035 */
1036static void qe_uart_config_port(struct uart_port *port, int flags)
1037{
1038 if (flags & UART_CONFIG_TYPE) {
1039 port->type = PORT_CPM;
1040 qe_uart_request_port(port);
1041 }
1042}
1043
1044/*
1045 * Release any memory and I/O resources that were allocated in
1046 * qe_uart_request_port().
1047 */
1048static void qe_uart_release_port(struct uart_port *port)
1049{
1050 struct uart_qe_port *qe_port =
1051 container_of(port, struct uart_qe_port, port);
1052 struct ucc_slow_private *uccs = qe_port->us_private;
1053
1054 dma_free_coherent(NULL, qe_port->bd_size, qe_port->bd_virt,
1055 qe_port->bd_dma_addr);
1056
1057 ucc_slow_free(uccs);
1058}
1059
1060/*
1061 * Verify that the data in serial_struct is suitable for this device.
1062 */
1063static int qe_uart_verify_port(struct uart_port *port,
1064 struct serial_struct *ser)
1065{
1066 if (ser->type != PORT_UNKNOWN && ser->type != PORT_CPM)
1067 return -EINVAL;
1068
1069 if (ser->irq < 0 || ser->irq >= NR_IRQS)
1070 return -EINVAL;
1071
1072 if (ser->baud_base < 9600)
1073 return -EINVAL;
1074
1075 return 0;
1076}
1077/* UART operations
1078 *
1079 * Details on these functions can be found in Documentation/serial/driver
1080 */
1081static struct uart_ops qe_uart_pops = {
1082 .tx_empty = qe_uart_tx_empty,
1083 .set_mctrl = qe_uart_set_mctrl,
1084 .get_mctrl = qe_uart_get_mctrl,
1085 .stop_tx = qe_uart_stop_tx,
1086 .start_tx = qe_uart_start_tx,
1087 .stop_rx = qe_uart_stop_rx,
1088 .enable_ms = qe_uart_enable_ms,
1089 .break_ctl = qe_uart_break_ctl,
1090 .startup = qe_uart_startup,
1091 .shutdown = qe_uart_shutdown,
1092 .set_termios = qe_uart_set_termios,
1093 .type = qe_uart_type,
1094 .release_port = qe_uart_release_port,
1095 .request_port = qe_uart_request_port,
1096 .config_port = qe_uart_config_port,
1097 .verify_port = qe_uart_verify_port,
1098};
1099
1100/*
1101 * Obtain the SOC model number and revision level
1102 *
1103 * This function parses the device tree to obtain the SOC model. It then
1104 * reads the SVR register to the revision.
1105 *
1106 * The device tree stores the SOC model two different ways.
1107 *
1108 * The new way is:
1109 *
1110 * cpu@0 {
1111 * compatible = "PowerPC,8323";
1112 * device_type = "cpu";
1113 * ...
1114 *
1115 *
1116 * The old way is:
1117 * PowerPC,8323@0 {
1118 * device_type = "cpu";
1119 * ...
1120 *
1121 * This code first checks the new way, and then the old way.
1122 */
1123static unsigned int soc_info(unsigned int *rev_h, unsigned int *rev_l)
1124{
1125 struct device_node *np;
1126 const char *soc_string;
1127 unsigned int svr;
1128 unsigned int soc;
1129
1130 /* Find the CPU node */
1131 np = of_find_node_by_type(NULL, "cpu");
1132 if (!np)
1133 return 0;
1134 /* Find the compatible property */
1135 soc_string = of_get_property(np, "compatible", NULL);
1136 if (!soc_string)
1137 /* No compatible property, so try the name. */
1138 soc_string = np->name;
1139
1140 /* Extract the SOC number from the "PowerPC," string */
1141 if ((sscanf(soc_string, "PowerPC,%u", &soc) != 1) || !soc)
1142 return 0;
1143
1144 /* Get the revision from the SVR */
1145 svr = mfspr(SPRN_SVR);
1146 *rev_h = (svr >> 4) & 0xf;
1147 *rev_l = svr & 0xf;
1148
1149 return soc;
1150}
1151
1152/*
1153 * requst_firmware_nowait() callback function
1154 *
1155 * This function is called by the kernel when a firmware is made available,
1156 * or if it times out waiting for the firmware.
1157 */
1158static void uart_firmware_cont(const struct firmware *fw, void *context)
1159{
1160 struct qe_firmware *firmware;
1161 struct device *dev = context;
1162 int ret;
1163
1164 if (!fw) {
1165 dev_err(dev, "firmware not found\n");
1166 return;
1167 }
1168
1169 firmware = (struct qe_firmware *) fw->data;
1170
1171 if (firmware->header.length != fw->size) {
1172 dev_err(dev, "invalid firmware\n");
1173 return;
1174 }
1175
1176 ret = qe_upload_firmware(firmware);
1177 if (ret) {
1178 dev_err(dev, "could not load firmware\n");
1179 return;
1180 }
1181
1182 firmware_loaded = 1;
1183}
1184
1185static int ucc_uart_probe(struct of_device *ofdev,
1186 const struct of_device_id *match)
1187{
1188 struct device_node *np = ofdev->node;
1189 const unsigned int *iprop; /* Integer OF properties */
1190 const char *sprop; /* String OF properties */
1191 struct uart_qe_port *qe_port = NULL;
1192 struct resource res;
1193 int ret;
1194
1195 /*
1196 * Determine if we need Soft-UART mode
1197 */
1198 if (of_find_property(np, "soft-uart", NULL)) {
1199 dev_dbg(&ofdev->dev, "using Soft-UART mode\n");
1200 soft_uart = 1;
1201 }
1202
1203 /*
1204 * If we are using Soft-UART, determine if we need to upload the
1205 * firmware, too.
1206 */
1207 if (soft_uart) {
1208 struct qe_firmware_info *qe_fw_info;
1209
1210 qe_fw_info = qe_get_firmware_info();
1211
1212 /* Check if the firmware has been uploaded. */
1213 if (qe_fw_info && strstr(qe_fw_info->id, "Soft-UART")) {
1214 firmware_loaded = 1;
1215 } else {
1216 char filename[32];
1217 unsigned int soc;
1218 unsigned int rev_h;
1219 unsigned int rev_l;
1220
1221 soc = soc_info(&rev_h, &rev_l);
1222 if (!soc) {
1223 dev_err(&ofdev->dev, "unknown CPU model\n");
1224 return -ENXIO;
1225 }
1226 sprintf(filename, "fsl_qe_ucode_uart_%u_%u%u.bin",
1227 soc, rev_h, rev_l);
1228
1229 dev_info(&ofdev->dev, "waiting for firmware %s\n",
1230 filename);
1231
1232 /*
1233 * We call request_firmware_nowait instead of
1234 * request_firmware so that the driver can load and
1235 * initialize the ports without holding up the rest of
1236 * the kernel. If hotplug support is enabled in the
1237 * kernel, then we use it.
1238 */
1239 ret = request_firmware_nowait(THIS_MODULE,
1240 FW_ACTION_HOTPLUG, filename, &ofdev->dev,
1241 &ofdev->dev, uart_firmware_cont);
1242 if (ret) {
1243 dev_err(&ofdev->dev,
1244 "could not load firmware %s\n",
1245 filename);
1246 return ret;
1247 }
1248 }
1249 }
1250
1251 qe_port = kzalloc(sizeof(struct uart_qe_port), GFP_KERNEL);
1252 if (!qe_port) {
1253 dev_err(&ofdev->dev, "can't allocate QE port structure\n");
1254 return -ENOMEM;
1255 }
1256
1257 /* Search for IRQ and mapbase */
1258 ret = of_address_to_resource(np, 0, &res);
1259 if (ret) {
1260 dev_err(&ofdev->dev, "missing 'reg' property in device tree\n");
1261 kfree(qe_port);
1262 return ret;
1263 }
1264 if (!res.start) {
1265 dev_err(&ofdev->dev, "invalid 'reg' property in device tree\n");
1266 kfree(qe_port);
1267 return -EINVAL;
1268 }
1269 qe_port->port.mapbase = res.start;
1270
1271 /* Get the UCC number (device ID) */
1272 /* UCCs are numbered 1-7 */
1273 iprop = of_get_property(np, "device-id", NULL);
1274 if (!iprop || (*iprop < 1) || (*iprop > UCC_MAX_NUM)) {
1275 dev_err(&ofdev->dev,
1276 "missing or invalid UCC specified in device tree\n");
1277 kfree(qe_port);
1278 return -ENODEV;
1279 }
1280 qe_port->ucc_num = *iprop - 1;
1281
1282 /*
1283 * In the future, we should not require the BRG to be specified in the
1284 * device tree. If no clock-source is specified, then just pick a BRG
1285 * to use. This requires a new QE library function that manages BRG
1286 * assignments.
1287 */
1288
1289 sprop = of_get_property(np, "rx-clock-name", NULL);
1290 if (!sprop) {
1291 dev_err(&ofdev->dev, "missing rx-clock-name in device tree\n");
1292 kfree(qe_port);
1293 return -ENODEV;
1294 }
1295
1296 qe_port->us_info.rx_clock = qe_clock_source(sprop);
1297 if ((qe_port->us_info.rx_clock < QE_BRG1) ||
1298 (qe_port->us_info.rx_clock > QE_BRG16)) {
1299 dev_err(&ofdev->dev, "rx-clock-name must be a BRG for UART\n");
1300 kfree(qe_port);
1301 return -ENODEV;
1302 }
1303
1304#ifdef LOOPBACK
1305 /* In internal loopback mode, TX and RX must use the same clock */
1306 qe_port->us_info.tx_clock = qe_port->us_info.rx_clock;
1307#else
1308 sprop = of_get_property(np, "tx-clock-name", NULL);
1309 if (!sprop) {
1310 dev_err(&ofdev->dev, "missing tx-clock-name in device tree\n");
1311 kfree(qe_port);
1312 return -ENODEV;
1313 }
1314 qe_port->us_info.tx_clock = qe_clock_source(sprop);
1315#endif
1316 if ((qe_port->us_info.tx_clock < QE_BRG1) ||
1317 (qe_port->us_info.tx_clock > QE_BRG16)) {
1318 dev_err(&ofdev->dev, "tx-clock-name must be a BRG for UART\n");
1319 kfree(qe_port);
1320 return -ENODEV;
1321 }
1322
1323 /* Get the port number, numbered 0-3 */
1324 iprop = of_get_property(np, "port-number", NULL);
1325 if (!iprop) {
1326 dev_err(&ofdev->dev, "missing port-number in device tree\n");
1327 kfree(qe_port);
1328 return -EINVAL;
1329 }
1330 qe_port->port.line = *iprop;
1331 if (qe_port->port.line >= UCC_MAX_UART) {
1332 dev_err(&ofdev->dev, "port-number must be 0-%u\n",
1333 UCC_MAX_UART - 1);
1334 kfree(qe_port);
1335 return -EINVAL;
1336 }
1337
1338 qe_port->port.irq = irq_of_parse_and_map(np, 0);
1339 if (qe_port->port.irq == NO_IRQ) {
1340 dev_err(&ofdev->dev, "could not map IRQ for UCC%u\n",
1341 qe_port->ucc_num + 1);
1342 kfree(qe_port);
1343 return -EINVAL;
1344 }
1345
1346 /*
1347 * Newer device trees have an "fsl,qe" compatible property for the QE
1348 * node, but we still need to support older device trees.
1349 */
1350 np = of_find_compatible_node(NULL, NULL, "fsl,qe");
1351 if (!np) {
1352 np = of_find_node_by_type(NULL, "qe");
1353 if (!np) {
1354 dev_err(&ofdev->dev, "could not find 'qe' node\n");
1355 kfree(qe_port);
1356 return -EINVAL;
1357 }
1358 }
1359
1360 iprop = of_get_property(np, "brg-frequency", NULL);
1361 if (!iprop) {
1362 dev_err(&ofdev->dev,
1363 "missing brg-frequency in device tree\n");
1364 kfree(qe_port);
1365 return -EINVAL;
1366 }
1367
1368 if (*iprop)
1369 qe_port->port.uartclk = *iprop;
1370 else {
1371 /*
1372 * Older versions of U-Boot do not initialize the brg-frequency
1373 * property, so in this case we assume the BRG frequency is
1374 * half the QE bus frequency.
1375 */
1376 iprop = of_get_property(np, "bus-frequency", NULL);
1377 if (!iprop) {
1378 dev_err(&ofdev->dev,
1379 "missing QE bus-frequency in device tree\n");
1380 kfree(qe_port);
1381 return -EINVAL;
1382 }
1383 if (*iprop)
1384 qe_port->port.uartclk = *iprop / 2;
1385 else {
1386 dev_err(&ofdev->dev,
1387 "invalid QE bus-frequency in device tree\n");
1388 kfree(qe_port);
1389 return -EINVAL;
1390 }
1391 }
1392
1393 spin_lock_init(&qe_port->port.lock);
1394 qe_port->np = np;
1395 qe_port->port.dev = &ofdev->dev;
1396 qe_port->port.ops = &qe_uart_pops;
1397 qe_port->port.iotype = UPIO_MEM;
1398
1399 qe_port->tx_nrfifos = TX_NUM_FIFO;
1400 qe_port->tx_fifosize = TX_BUF_SIZE;
1401 qe_port->rx_nrfifos = RX_NUM_FIFO;
1402 qe_port->rx_fifosize = RX_BUF_SIZE;
1403
1404 qe_port->wait_closing = UCC_WAIT_CLOSING;
1405 qe_port->port.fifosize = 512;
1406 qe_port->port.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP;
1407
1408 qe_port->us_info.ucc_num = qe_port->ucc_num;
1409 qe_port->us_info.regs = (phys_addr_t) res.start;
1410 qe_port->us_info.irq = qe_port->port.irq;
1411
1412 qe_port->us_info.rx_bd_ring_len = qe_port->rx_nrfifos;
1413 qe_port->us_info.tx_bd_ring_len = qe_port->tx_nrfifos;
1414
1415 /* Make sure ucc_slow_init() initializes both TX and RX */
1416 qe_port->us_info.init_tx = 1;
1417 qe_port->us_info.init_rx = 1;
1418
1419 /* Add the port to the uart sub-system. This will cause
1420 * qe_uart_config_port() to be called, so the us_info structure must
1421 * be initialized.
1422 */
1423 ret = uart_add_one_port(&ucc_uart_driver, &qe_port->port);
1424 if (ret) {
1425 dev_err(&ofdev->dev, "could not add /dev/ttyQE%u\n",
1426 qe_port->port.line);
1427 kfree(qe_port);
1428 return ret;
1429 }
1430
1431 dev_set_drvdata(&ofdev->dev, qe_port);
1432
1433 dev_info(&ofdev->dev, "UCC%u assigned to /dev/ttyQE%u\n",
1434 qe_port->ucc_num + 1, qe_port->port.line);
1435
1436 /* Display the mknod command for this device */
1437 dev_dbg(&ofdev->dev, "mknod command is 'mknod /dev/ttyQE%u c %u %u'\n",
1438 qe_port->port.line, SERIAL_QE_MAJOR,
1439 SERIAL_QE_MINOR + qe_port->port.line);
1440
1441 return 0;
1442}
1443
1444static int ucc_uart_remove(struct of_device *ofdev)
1445{
1446 struct uart_qe_port *qe_port = dev_get_drvdata(&ofdev->dev);
1447
1448 dev_info(&ofdev->dev, "removing /dev/ttyQE%u\n", qe_port->port.line);
1449
1450 uart_remove_one_port(&ucc_uart_driver, &qe_port->port);
1451
1452 dev_set_drvdata(&ofdev->dev, NULL);
1453 kfree(qe_port);
1454
1455 return 0;
1456}
1457
1458static struct of_device_id ucc_uart_match[] = {
1459 {
1460 .type = "serial",
1461 .compatible = "ucc_uart",
1462 },
1463 {},
1464};
1465MODULE_DEVICE_TABLE(of, ucc_uart_match);
1466
1467static struct of_platform_driver ucc_uart_of_driver = {
1468 .owner = THIS_MODULE,
1469 .name = "ucc_uart",
1470 .match_table = ucc_uart_match,
1471 .probe = ucc_uart_probe,
1472 .remove = ucc_uart_remove,
1473};
1474
1475static int __init ucc_uart_init(void)
1476{
1477 int ret;
1478
1479 printk(KERN_INFO "Freescale QUICC Engine UART device driver\n");
1480#ifdef LOOPBACK
1481 printk(KERN_INFO "ucc-uart: Using loopback mode\n");
1482#endif
1483
1484 ret = uart_register_driver(&ucc_uart_driver);
1485 if (ret) {
1486 printk(KERN_ERR "ucc-uart: could not register UART driver\n");
1487 return ret;
1488 }
1489
1490 ret = of_register_platform_driver(&ucc_uart_of_driver);
1491 if (ret)
1492 printk(KERN_ERR
1493 "ucc-uart: could not register platform driver\n");
1494
1495 return ret;
1496}
1497
1498static void __exit ucc_uart_exit(void)
1499{
1500 printk(KERN_INFO
1501 "Freescale QUICC Engine UART device driver unloading\n");
1502
1503 of_unregister_platform_driver(&ucc_uart_of_driver);
1504 uart_unregister_driver(&ucc_uart_driver);
1505}
1506
1507module_init(ucc_uart_init);
1508module_exit(ucc_uart_exit);
1509
1510MODULE_DESCRIPTION("Freescale QUICC Engine (QE) UART");
1511MODULE_AUTHOR("Timur Tabi <timur@freescale.com>");
1512MODULE_LICENSE("GPL v2");
1513MODULE_ALIAS_CHARDEV_MAJOR(SERIAL_QE_MAJOR);
1514