serial: sh-sci: Dynamic clock management depends on HAVE_CLK.

Presently this is conditionalized on sh, and disabled for sh64.
Now that SH-5 ties in to the clock framework, the sh64 exception
can be dropped. Additionally, ARM will want to use the same hooks
once SH-Mobile G3 grows clock framework support, so switch these
paths over to HAVE_CLK now.

Once the H8 and ARM sh-sci users hook up HAVE_CLK, the driver can
be switched over to having an outright dependency on it and the
ifdefs can go away.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

1 files changed, 15 insertions, 28 deletions

diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index f5aebc9f27e7..5bb571548558 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -78,7 +78,7 @@ struct sci_port {
         struct timer_list       break_timer;
         int                     break_flag;
 
-#ifdef CONFIG_SUPERH
+#ifdef CONFIG_HAVE_CLK
         /* Port clock */
         struct clk              *clk;
 #endif
@@ -831,7 +831,7 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
         return IRQ_HANDLED;
 }
 
-#ifdef CONFIG_CPU_FREQ
+#if defined(CONFIG_CPU_FREQ) && defined(CONFIG_HAVE_CLK)
 /*
  * Here we define a transistion notifier so that we can update all of our
  * ports' baud rate when the peripheral clock changes.
@@ -860,7 +860,7 @@ static int sci_notifier(struct notifier_block *self,
                          * Clean this up later..
                          */
                         clk = clk_get(NULL, "module_clk");
-                        port->uartclk = clk_get_rate(clk) * 16;
+                        port->uartclk = clk_get_rate(clk);
                         clk_put(clk);
                 }
 
@@ -873,7 +873,7 @@ static int sci_notifier(struct notifier_block *self,
 }
 
 static struct notifier_block sci_nb = { &sci_notifier, NULL, 0 };
-#endif /* CONFIG_CPU_FREQ */
+#endif /* CONFIG_CPU_FREQ && CONFIG_HAVE_CLK */
 
 static int sci_request_irq(struct sci_port *port)
 {
@@ -1008,7 +1008,7 @@ static int sci_startup(struct uart_port *port)
         if (s->enable)
                 s->enable(port);
 
-#if defined(CONFIG_SUPERH) && !defined(CONFIG_SUPERH64)
+#ifdef CONFIG_HAVE_CLK
         s->clk = clk_get(NULL, "module_clk");
 #endif
 
@@ -1030,7 +1030,7 @@ static void sci_shutdown(struct uart_port *port)
         if (s->disable)
                 s->disable(port);
 
-#if defined(CONFIG_SUPERH) && !defined(CONFIG_SUPERH64)
+#ifdef CONFIG_HAVE_CLK
         clk_put(s->clk);
         s->clk = NULL;
 #endif
@@ -1041,24 +1041,11 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
 {
         struct sci_port *s = &sci_ports[port->line];
         unsigned int status, baud, smr_val;
-        int t;
+        int t = -1;
 
         baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
-
-        switch (baud) {
-                case 0:
-                        t = -1;
-                        break;
-                default:
-                {
-#if defined(CONFIG_SUPERH) && !defined(CONFIG_SUPERH64)
-                        t = SCBRR_VALUE(baud, clk_get_rate(s->clk));
-#else
-                        t = SCBRR_VALUE(baud);
-#endif
-                        break;
-                }
-        }
+        if (likely(baud))
+                t = SCBRR_VALUE(baud, port->uartclk);
 
         do {
                 status = sci_in(port, SCxSR);
@@ -1207,17 +1194,17 @@ static void __init sci_init_ports(void)
                 sci_ports[i].disable    = h8300_sci_disable;
 #endif
                 sci_ports[i].port.uartclk = CONFIG_CPU_CLOCK;
-#elif defined(CONFIG_SUPERH64)
-                sci_ports[i].port.uartclk = current_cpu_data.module_clock * 16;
-#else
+#elif defined(CONFIG_HAVE_CLK)
                 /*
                  * XXX: We should use a proper SCI/SCIF clock
                  */
                 {
                         struct clk *clk = clk_get(NULL, "module_clk");
-                        sci_ports[i].port.uartclk = clk_get_rate(clk) * 16;
+                        sci_ports[i].port.uartclk = clk_get_rate(clk);
                         clk_put(clk);
                 }
+#else
+#error "Need a valid uartclk"
 #endif
 
                 sci_ports[i].break_timer.data = (unsigned long)&sci_ports[i];
@@ -1285,7 +1272,7 @@ static int __init serial_console_setup(struct console *co, char *options)
 
         port->type = serial_console_port->type;
 
-#if defined(CONFIG_SUPERH) && !defined(CONFIG_SUPERH64)
+#ifdef CONFIG_HAVE_CLK
         if (!serial_console_port->clk)
                 serial_console_port->clk = clk_get(NULL, "module_clk");
 #endif
@@ -1479,7 +1466,7 @@ static int __devinit sci_probe(struct platform_device *dev)
         kgdb_putchar    = kgdb_sci_putchar;
 #endif
 
-#ifdef CONFIG_CPU_FREQ
+#if defined(CONFIG_CPU_FREQ) && defined(CONFIG_HAVE_CLK)
         cpufreq_register_notifier(&sci_nb, CPUFREQ_TRANSITION_NOTIFIER);
         dev_info(&dev->dev, "CPU frequency notifier registered\n");
 #endif