pcmcia: replace kio_addr_t with unsigned int everywhere

Remove kio_addr_t, and replace it with unsigned int.  No known architecture
needs more than 32 bits for IO addresses and ports and having a separate type
for it is just messy.

Signed-off-by: Olof Johansson <olof@lixom.net>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

1 files changed, 3 insertions, 3 deletions

diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index d8b660061c13..164d2a42eb59 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -389,7 +389,7 @@ static void serial_detach(struct pcmcia_device *link)
 /*====================================================================*/
 
 static int setup_serial(struct pcmcia_device *handle, struct serial_info * info,
-                        kio_addr_t iobase, int irq)
+                        unsigned int iobase, int irq)
 {
         struct uart_port port;
         int line;
@@ -456,7 +456,7 @@ next_tuple(struct pcmcia_device *handle, tuple_t * tuple, cisparse_t * parse)
 
 static int simple_config(struct pcmcia_device *link)
 {
-        static const kio_addr_t base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
+        static const unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
         static const int size_table[2] = { 8, 16 };
         struct serial_info *info = link->priv;
         struct serial_cfg_mem *cfg_mem;
@@ -480,7 +480,7 @@ static int simple_config(struct pcmcia_device *link)
         /* If the card is already configured, look up the port and irq */
         i = pcmcia_get_configuration_info(link, &config);
         if ((i == CS_SUCCESS) && (config.Attributes & CONF_VALID_CLIENT)) {
-                kio_addr_t port = 0;
+                unsigned int port = 0;
                 if ((config.BasePort2 != 0) && (config.NumPorts2 == 8)) {
                         port = config.BasePort2;
                         info->slave = 1;