[ARM] S3C6400: serial support for S3C6400 and S3C6410 SoCs

Add support to the Samsung serial driver for the S3C6400
and S3C6410 serial ports.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>

1 files changed, 151 insertions, 0 deletions

diff --git a/drivers/serial/s3c6400.c b/drivers/serial/s3c6400.c
new file mode 100644
index 000000000000..06936d13393f
--- /dev/null
+++ b/drivers/serial/s3c6400.c
@@ -0,0 +1,151 @@
+/* linux/drivers/serial/s3c6400.c
+ *
+ * Driver for Samsung S3C6400 and S3C6410 SoC onboard UARTs.
+ *
+ * Copyright 2008 Openmoko,  Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+
+#include <asm/irq.h>
+#include <mach/hardware.h>
+
+#include <plat/regs-serial.h>
+
+#include "samsung.h"
+
+static int s3c6400_serial_setsource(struct uart_port *port,
+                                    struct s3c24xx_uart_clksrc *clk)
+{
+        unsigned long ucon = rd_regl(port, S3C2410_UCON);
+
+        if (strcmp(clk->name, "uclk0") == 0) {
+                ucon &= ~S3C6400_UCON_CLKMASK;
+                ucon |= S3C6400_UCON_UCLK0;
+        } else if (strcmp(clk->name, "uclk1") == 0)
+                ucon |= S3C6400_UCON_UCLK1;
+        else if (strcmp(clk->name, "pclk") == 0) {
+                /* See notes about transitioning from UCLK to PCLK */
+                ucon &= ~S3C6400_UCON_UCLK0;
+        } else {
+                printk(KERN_ERR "unknown clock source %s\n", clk->name);
+                return -EINVAL;
+        }
+
+        wr_regl(port, S3C2410_UCON, ucon);
+        return 0;
+}
+
+
+static int s3c6400_serial_getsource(struct uart_port *port,
+                                    struct s3c24xx_uart_clksrc *clk)
+{
+        u32 ucon = rd_regl(port, S3C2410_UCON);
+
+        clk->divisor = 1;
+
+        switch (ucon & S3C6400_UCON_CLKMASK) {
+        case S3C6400_UCON_UCLK0:
+                clk->name = "uclk0";
+                break;
+
+        case S3C6400_UCON_UCLK1:
+                clk->name = "uclk1";
+                break;
+
+        case S3C6400_UCON_PCLK:
+        case S3C6400_UCON_PCLK2:
+                clk->name = "pclk";
+                break;
+        }
+
+        return 0;
+}
+
+static int s3c6400_serial_resetport(struct uart_port *port,
+                                    struct s3c2410_uartcfg *cfg)
+{
+        unsigned long ucon = rd_regl(port, S3C2410_UCON);
+
+        dbg("s3c6400_serial_resetport: port=%p (%08lx), cfg=%p\n",
+            port, port->mapbase, cfg);
+
+        /* ensure we don't change the clock settings... */
+
+        ucon &= S3C6400_UCON_CLKMASK;
+
+        wr_regl(port, S3C2410_UCON,  ucon | cfg->ucon);
+        wr_regl(port, S3C2410_ULCON, cfg->ulcon);
+
+        /* reset both fifos */
+
+        wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
+        wr_regl(port, S3C2410_UFCON, cfg->ufcon);
+
+        return 0;
+}
+
+static struct s3c24xx_uart_info s3c6400_uart_inf = {
+        .name           = "Samsung S3C6400 UART",
+        .type           = PORT_S3C6400,
+        .fifosize       = 64,
+        .rx_fifomask    = S3C2440_UFSTAT_RXMASK,
+        .rx_fifoshift   = S3C2440_UFSTAT_RXSHIFT,
+        .rx_fifofull    = S3C2440_UFSTAT_RXFULL,
+        .tx_fifofull    = S3C2440_UFSTAT_TXFULL,
+        .tx_fifomask    = S3C2440_UFSTAT_TXMASK,
+        .tx_fifoshift   = S3C2440_UFSTAT_TXSHIFT,
+        .get_clksrc     = s3c6400_serial_getsource,
+        .set_clksrc     = s3c6400_serial_setsource,
+        .reset_port     = s3c6400_serial_resetport,
+};
+
+/* device management */
+
+static int s3c6400_serial_probe(struct platform_device *dev)
+{
+        dbg("s3c6400_serial_probe: dev=%p\n", dev);
+        return s3c24xx_serial_probe(dev, &s3c6400_uart_inf);
+}
+
+static struct platform_driver s3c6400_serial_drv = {
+        .probe          = s3c6400_serial_probe,
+        .remove         = s3c24xx_serial_remove,
+        .driver         = {
+                .name   = "s3c6400-uart",
+                .owner  = THIS_MODULE,
+        },
+};
+
+s3c24xx_console_init(&s3c6400_serial_drv, &s3c6400_uart_inf);
+
+static int __init s3c6400_serial_init(void)
+{
+        return s3c24xx_serial_init(&s3c6400_serial_drv, &s3c6400_uart_inf);
+}
+
+static void __exit s3c6400_serial_exit(void)
+{
+        platform_driver_unregister(&s3c6400_serial_drv);
+}
+
+module_init(s3c6400_serial_init);
+module_exit(s3c6400_serial_exit);
+
+MODULE_DESCRIPTION("Samsung S3C6400,S3C6410 SoC Serial port driver");
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:s3c6400-uart");