aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/serial/pmac_zilog.h
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 18:20:36 -0400
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 18:20:36 -0400
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/serial/pmac_zilog.h
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'drivers/serial/pmac_zilog.h')
-rw-r--r--drivers/serial/pmac_zilog.h382
1 files changed, 382 insertions, 0 deletions
diff --git a/drivers/serial/pmac_zilog.h b/drivers/serial/pmac_zilog.h
new file mode 100644
index 000000000000..c03f9bfacdd8
--- /dev/null
+++ b/drivers/serial/pmac_zilog.h
@@ -0,0 +1,382 @@
1#ifndef __PMAC_ZILOG_H__
2#define __PMAC_ZILOG_H__
3
4#define pmz_debug(fmt,arg...) dev_dbg(&uap->dev->ofdev.dev, fmt, ## arg)
5
6/*
7 * At most 2 ESCCs with 2 ports each
8 */
9#define MAX_ZS_PORTS 4
10
11/*
12 * We wrap our port structure around the generic uart_port.
13 */
14#define NUM_ZSREGS 17
15
16struct uart_pmac_port {
17 struct uart_port port;
18 struct uart_pmac_port *mate;
19
20 /* macio_dev for the escc holding this port (maybe be null on
21 * early inited port)
22 */
23 struct macio_dev *dev;
24 /* device node to this port, this points to one of 2 childs
25 * of "escc" node (ie. ch-a or ch-b)
26 */
27 struct device_node *node;
28
29 /* Port type as obtained from device tree (IRDA, modem, ...) */
30 int port_type;
31 u8 curregs[NUM_ZSREGS];
32
33 unsigned int flags;
34#define PMACZILOG_FLAG_IS_CONS 0x00000001
35#define PMACZILOG_FLAG_IS_KGDB 0x00000002
36#define PMACZILOG_FLAG_MODEM_STATUS 0x00000004
37#define PMACZILOG_FLAG_IS_CHANNEL_A 0x00000008
38#define PMACZILOG_FLAG_REGS_HELD 0x00000010
39#define PMACZILOG_FLAG_TX_STOPPED 0x00000020
40#define PMACZILOG_FLAG_TX_ACTIVE 0x00000040
41#define PMACZILOG_FLAG_ENABLED 0x00000080
42#define PMACZILOG_FLAG_IS_IRDA 0x00000100
43#define PMACZILOG_FLAG_IS_INTMODEM 0x00000200
44#define PMACZILOG_FLAG_HAS_DMA 0x00000400
45#define PMACZILOG_FLAG_RSRC_REQUESTED 0x00000800
46#define PMACZILOG_FLAG_IS_ASLEEP 0x00001000
47#define PMACZILOG_FLAG_IS_OPEN 0x00002000
48#define PMACZILOG_FLAG_IS_IRQ_ON 0x00004000
49#define PMACZILOG_FLAG_IS_EXTCLK 0x00008000
50#define PMACZILOG_FLAG_BREAK 0x00010000
51
52 unsigned char parity_mask;
53 unsigned char prev_status;
54
55 volatile u8 __iomem *control_reg;
56 volatile u8 __iomem *data_reg;
57
58 unsigned int tx_dma_irq;
59 unsigned int rx_dma_irq;
60 volatile struct dbdma_regs __iomem *tx_dma_regs;
61 volatile struct dbdma_regs __iomem *rx_dma_regs;
62
63 struct termios termios_cache;
64};
65
66#define to_pmz(p) ((struct uart_pmac_port *)(p))
67
68static inline struct uart_pmac_port *pmz_get_port_A(struct uart_pmac_port *uap)
69{
70 if (uap->flags & PMACZILOG_FLAG_IS_CHANNEL_A)
71 return uap;
72 return uap->mate;
73}
74
75/*
76 * Register acessors. Note that we don't need to enforce a recovery
77 * delay on PCI PowerMac hardware, it's dealt in HW by the MacIO chip,
78 * though if we try to use this driver on older machines, we might have
79 * to add it back
80 */
81static inline u8 read_zsreg(struct uart_pmac_port *port, u8 reg)
82{
83 if (reg != 0)
84 writeb(reg, port->control_reg);
85 return readb(port->control_reg);
86}
87
88static inline void write_zsreg(struct uart_pmac_port *port, u8 reg, u8 value)
89{
90 if (reg != 0)
91 writeb(reg, port->control_reg);
92 writeb(value, port->control_reg);
93}
94
95static inline u8 read_zsdata(struct uart_pmac_port *port)
96{
97 return readb(port->data_reg);
98}
99
100static inline void write_zsdata(struct uart_pmac_port *port, u8 data)
101{
102 writeb(data, port->data_reg);
103}
104
105static inline void zssync(struct uart_pmac_port *port)
106{
107 (void)readb(port->control_reg);
108}
109
110/* Conversion routines to/from brg time constants from/to bits
111 * per second.
112 */
113#define BRG_TO_BPS(brg, freq) ((freq) / 2 / ((brg) + 2))
114#define BPS_TO_BRG(bps, freq) ((((freq) + (bps)) / (2 * (bps))) - 2)
115
116#define ZS_CLOCK 3686400 /* Z8530 RTxC input clock rate */
117
118/* The Zilog register set */
119
120#define FLAG 0x7e
121
122/* Write Register 0 */
123#define R0 0 /* Register selects */
124#define R1 1
125#define R2 2
126#define R3 3
127#define R4 4
128#define R5 5
129#define R6 6
130#define R7 7
131#define R8 8
132#define R9 9
133#define R10 10
134#define R11 11
135#define R12 12
136#define R13 13
137#define R14 14
138#define R15 15
139#define R7P 16
140
141#define NULLCODE 0 /* Null Code */
142#define POINT_HIGH 0x8 /* Select upper half of registers */
143#define RES_EXT_INT 0x10 /* Reset Ext. Status Interrupts */
144#define SEND_ABORT 0x18 /* HDLC Abort */
145#define RES_RxINT_FC 0x20 /* Reset RxINT on First Character */
146#define RES_Tx_P 0x28 /* Reset TxINT Pending */
147#define ERR_RES 0x30 /* Error Reset */
148#define RES_H_IUS 0x38 /* Reset highest IUS */
149
150#define RES_Rx_CRC 0x40 /* Reset Rx CRC Checker */
151#define RES_Tx_CRC 0x80 /* Reset Tx CRC Checker */
152#define RES_EOM_L 0xC0 /* Reset EOM latch */
153
154/* Write Register 1 */
155
156#define EXT_INT_ENAB 0x1 /* Ext Int Enable */
157#define TxINT_ENAB 0x2 /* Tx Int Enable */
158#define PAR_SPEC 0x4 /* Parity is special condition */
159
160#define RxINT_DISAB 0 /* Rx Int Disable */
161#define RxINT_FCERR 0x8 /* Rx Int on First Character Only or Error */
162#define INT_ALL_Rx 0x10 /* Int on all Rx Characters or error */
163#define INT_ERR_Rx 0x18 /* Int on error only */
164#define RxINT_MASK 0x18
165
166#define WT_RDY_RT 0x20 /* W/Req reflects recv if 1, xmit if 0 */
167#define WT_FN_RDYFN 0x40 /* W/Req pin is DMA request if 1, wait if 0 */
168#define WT_RDY_ENAB 0x80 /* Enable W/Req pin */
169
170/* Write Register #2 (Interrupt Vector) */
171
172/* Write Register 3 */
173
174#define RxENABLE 0x1 /* Rx Enable */
175#define SYNC_L_INH 0x2 /* Sync Character Load Inhibit */
176#define ADD_SM 0x4 /* Address Search Mode (SDLC) */
177#define RxCRC_ENAB 0x8 /* Rx CRC Enable */
178#define ENT_HM 0x10 /* Enter Hunt Mode */
179#define AUTO_ENAB 0x20 /* Auto Enables */
180#define Rx5 0x0 /* Rx 5 Bits/Character */
181#define Rx7 0x40 /* Rx 7 Bits/Character */
182#define Rx6 0x80 /* Rx 6 Bits/Character */
183#define Rx8 0xc0 /* Rx 8 Bits/Character */
184#define RxN_MASK 0xc0
185
186/* Write Register 4 */
187
188#define PAR_ENAB 0x1 /* Parity Enable */
189#define PAR_EVEN 0x2 /* Parity Even/Odd* */
190
191#define SYNC_ENAB 0 /* Sync Modes Enable */
192#define SB1 0x4 /* 1 stop bit/char */
193#define SB15 0x8 /* 1.5 stop bits/char */
194#define SB2 0xc /* 2 stop bits/char */
195#define SB_MASK 0xc
196
197#define MONSYNC 0 /* 8 Bit Sync character */
198#define BISYNC 0x10 /* 16 bit sync character */
199#define SDLC 0x20 /* SDLC Mode (01111110 Sync Flag) */
200#define EXTSYNC 0x30 /* External Sync Mode */
201
202#define X1CLK 0x0 /* x1 clock mode */
203#define X16CLK 0x40 /* x16 clock mode */
204#define X32CLK 0x80 /* x32 clock mode */
205#define X64CLK 0xC0 /* x64 clock mode */
206#define XCLK_MASK 0xC0
207
208/* Write Register 5 */
209
210#define TxCRC_ENAB 0x1 /* Tx CRC Enable */
211#define RTS 0x2 /* RTS */
212#define SDLC_CRC 0x4 /* SDLC/CRC-16 */
213#define TxENABLE 0x8 /* Tx Enable */
214#define SND_BRK 0x10 /* Send Break */
215#define Tx5 0x0 /* Tx 5 bits (or less)/character */
216#define Tx7 0x20 /* Tx 7 bits/character */
217#define Tx6 0x40 /* Tx 6 bits/character */
218#define Tx8 0x60 /* Tx 8 bits/character */
219#define TxN_MASK 0x60
220#define DTR 0x80 /* DTR */
221
222/* Write Register 6 (Sync bits 0-7/SDLC Address Field) */
223
224/* Write Register 7 (Sync bits 8-15/SDLC 01111110) */
225
226/* Write Register 7' (Some enhanced feature control) */
227#define ENEXREAD 0x40 /* Enable read of some write registers */
228
229/* Write Register 8 (transmit buffer) */
230
231/* Write Register 9 (Master interrupt control) */
232#define VIS 1 /* Vector Includes Status */
233#define NV 2 /* No Vector */
234#define DLC 4 /* Disable Lower Chain */
235#define MIE 8 /* Master Interrupt Enable */
236#define STATHI 0x10 /* Status high */
237#define NORESET 0 /* No reset on write to R9 */
238#define CHRB 0x40 /* Reset channel B */
239#define CHRA 0x80 /* Reset channel A */
240#define FHWRES 0xc0 /* Force hardware reset */
241
242/* Write Register 10 (misc control bits) */
243#define BIT6 1 /* 6 bit/8bit sync */
244#define LOOPMODE 2 /* SDLC Loop mode */
245#define ABUNDER 4 /* Abort/flag on SDLC xmit underrun */
246#define MARKIDLE 8 /* Mark/flag on idle */
247#define GAOP 0x10 /* Go active on poll */
248#define NRZ 0 /* NRZ mode */
249#define NRZI 0x20 /* NRZI mode */
250#define FM1 0x40 /* FM1 (transition = 1) */
251#define FM0 0x60 /* FM0 (transition = 0) */
252#define CRCPS 0x80 /* CRC Preset I/O */
253
254/* Write Register 11 (Clock Mode control) */
255#define TRxCXT 0 /* TRxC = Xtal output */
256#define TRxCTC 1 /* TRxC = Transmit clock */
257#define TRxCBR 2 /* TRxC = BR Generator Output */
258#define TRxCDP 3 /* TRxC = DPLL output */
259#define TRxCOI 4 /* TRxC O/I */
260#define TCRTxCP 0 /* Transmit clock = RTxC pin */
261#define TCTRxCP 8 /* Transmit clock = TRxC pin */
262#define TCBR 0x10 /* Transmit clock = BR Generator output */
263#define TCDPLL 0x18 /* Transmit clock = DPLL output */
264#define RCRTxCP 0 /* Receive clock = RTxC pin */
265#define RCTRxCP 0x20 /* Receive clock = TRxC pin */
266#define RCBR 0x40 /* Receive clock = BR Generator output */
267#define RCDPLL 0x60 /* Receive clock = DPLL output */
268#define RTxCX 0x80 /* RTxC Xtal/No Xtal */
269
270/* Write Register 12 (lower byte of baud rate generator time constant) */
271
272/* Write Register 13 (upper byte of baud rate generator time constant) */
273
274/* Write Register 14 (Misc control bits) */
275#define BRENAB 1 /* Baud rate generator enable */
276#define BRSRC 2 /* Baud rate generator source */
277#define DTRREQ 4 /* DTR/Request function */
278#define AUTOECHO 8 /* Auto Echo */
279#define LOOPBAK 0x10 /* Local loopback */
280#define SEARCH 0x20 /* Enter search mode */
281#define RMC 0x40 /* Reset missing clock */
282#define DISDPLL 0x60 /* Disable DPLL */
283#define SSBR 0x80 /* Set DPLL source = BR generator */
284#define SSRTxC 0xa0 /* Set DPLL source = RTxC */
285#define SFMM 0xc0 /* Set FM mode */
286#define SNRZI 0xe0 /* Set NRZI mode */
287
288/* Write Register 15 (external/status interrupt control) */
289#define EN85C30 1 /* Enable some 85c30-enhanced registers */
290#define ZCIE 2 /* Zero count IE */
291#define ENSTFIFO 4 /* Enable status FIFO (SDLC) */
292#define DCDIE 8 /* DCD IE */
293#define SYNCIE 0x10 /* Sync/hunt IE */
294#define CTSIE 0x20 /* CTS IE */
295#define TxUIE 0x40 /* Tx Underrun/EOM IE */
296#define BRKIE 0x80 /* Break/Abort IE */
297
298
299/* Read Register 0 */
300#define Rx_CH_AV 0x1 /* Rx Character Available */
301#define ZCOUNT 0x2 /* Zero count */
302#define Tx_BUF_EMP 0x4 /* Tx Buffer empty */
303#define DCD 0x8 /* DCD */
304#define SYNC_HUNT 0x10 /* Sync/hunt */
305#define CTS 0x20 /* CTS */
306#define TxEOM 0x40 /* Tx underrun */
307#define BRK_ABRT 0x80 /* Break/Abort */
308
309/* Read Register 1 */
310#define ALL_SNT 0x1 /* All sent */
311/* Residue Data for 8 Rx bits/char programmed */
312#define RES3 0x8 /* 0/3 */
313#define RES4 0x4 /* 0/4 */
314#define RES5 0xc /* 0/5 */
315#define RES6 0x2 /* 0/6 */
316#define RES7 0xa /* 0/7 */
317#define RES8 0x6 /* 0/8 */
318#define RES18 0xe /* 1/8 */
319#define RES28 0x0 /* 2/8 */
320/* Special Rx Condition Interrupts */
321#define PAR_ERR 0x10 /* Parity error */
322#define Rx_OVR 0x20 /* Rx Overrun Error */
323#define CRC_ERR 0x40 /* CRC/Framing Error */
324#define END_FR 0x80 /* End of Frame (SDLC) */
325
326/* Read Register 2 (channel b only) - Interrupt vector */
327#define CHB_Tx_EMPTY 0x00
328#define CHB_EXT_STAT 0x02
329#define CHB_Rx_AVAIL 0x04
330#define CHB_SPECIAL 0x06
331#define CHA_Tx_EMPTY 0x08
332#define CHA_EXT_STAT 0x0a
333#define CHA_Rx_AVAIL 0x0c
334#define CHA_SPECIAL 0x0e
335#define STATUS_MASK 0x06
336
337/* Read Register 3 (interrupt pending register) ch a only */
338#define CHBEXT 0x1 /* Channel B Ext/Stat IP */
339#define CHBTxIP 0x2 /* Channel B Tx IP */
340#define CHBRxIP 0x4 /* Channel B Rx IP */
341#define CHAEXT 0x8 /* Channel A Ext/Stat IP */
342#define CHATxIP 0x10 /* Channel A Tx IP */
343#define CHARxIP 0x20 /* Channel A Rx IP */
344
345/* Read Register 8 (receive data register) */
346
347/* Read Register 10 (misc status bits) */
348#define ONLOOP 2 /* On loop */
349#define LOOPSEND 0x10 /* Loop sending */
350#define CLK2MIS 0x40 /* Two clocks missing */
351#define CLK1MIS 0x80 /* One clock missing */
352
353/* Read Register 12 (lower byte of baud rate generator constant) */
354
355/* Read Register 13 (upper byte of baud rate generator constant) */
356
357/* Read Register 15 (value of WR 15) */
358
359/* Misc macros */
360#define ZS_CLEARERR(port) (write_zsreg(port, 0, ERR_RES))
361#define ZS_CLEARFIFO(port) do { volatile unsigned char garbage; \
362 garbage = read_zsdata(port); \
363 garbage = read_zsdata(port); \
364 garbage = read_zsdata(port); \
365 } while(0)
366
367#define ZS_IS_CONS(UP) ((UP)->flags & PMACZILOG_FLAG_IS_CONS)
368#define ZS_IS_KGDB(UP) ((UP)->flags & PMACZILOG_FLAG_IS_KGDB)
369#define ZS_IS_CHANNEL_A(UP) ((UP)->flags & PMACZILOG_FLAG_IS_CHANNEL_A)
370#define ZS_REGS_HELD(UP) ((UP)->flags & PMACZILOG_FLAG_REGS_HELD)
371#define ZS_TX_STOPPED(UP) ((UP)->flags & PMACZILOG_FLAG_TX_STOPPED)
372#define ZS_TX_ACTIVE(UP) ((UP)->flags & PMACZILOG_FLAG_TX_ACTIVE)
373#define ZS_WANTS_MODEM_STATUS(UP) ((UP)->flags & PMACZILOG_FLAG_MODEM_STATUS)
374#define ZS_IS_IRDA(UP) ((UP)->flags & PMACZILOG_FLAG_IS_IRDA)
375#define ZS_IS_INTMODEM(UP) ((UP)->flags & PMACZILOG_FLAG_IS_INTMODEM)
376#define ZS_HAS_DMA(UP) ((UP)->flags & PMACZILOG_FLAG_HAS_DMA)
377#define ZS_IS_ASLEEP(UP) ((UP)->flags & PMACZILOG_FLAG_IS_ASLEEP)
378#define ZS_IS_OPEN(UP) ((UP)->flags & PMACZILOG_FLAG_IS_OPEN)
379#define ZS_IS_IRQ_ON(UP) ((UP)->flags & PMACZILOG_FLAG_IS_IRQ_ON)
380#define ZS_IS_EXTCLK(UP) ((UP)->flags & PMACZILOG_FLAG_IS_EXTCLK)
381
382#endif /* __PMAC_ZILOG_H__ */