Merge branch 'parisc' from /home/kyle/repos/parisc-2.6.git

Conflicts:

	arch/parisc/hpux/sys_hpux.c
	arch/parisc/mm/ioremap.c

1 files changed, 132 insertions, 35 deletions

diff --git a/drivers/serial/mux.c b/drivers/serial/mux.c
index ccb8fa1800a5..83211013deb8 100644
--- a/drivers/serial/mux.c
+++ b/drivers/serial/mux.c
@@ -51,7 +51,11 @@
 
 #define MUX_NR 256
 static unsigned int port_cnt __read_mostly;
-static struct uart_port mux_ports[MUX_NR];
+struct mux_port {
+        struct uart_port port;
+        int enabled;
+};
+static struct mux_port mux_ports[MUX_NR];
 
 static struct uart_driver mux_driver = {
         .owner = THIS_MODULE,
@@ -66,7 +70,36 @@ static struct timer_list mux_timer;
 
 #define UART_PUT_CHAR(p, c) __raw_writel((c), (p)->membase + IO_DATA_REG_OFFSET)
 #define UART_GET_FIFO_CNT(p) __raw_readl((p)->membase + IO_DCOUNT_REG_OFFSET)
-#define GET_MUX_PORTS(iodc_data) ((((iodc_data)[4] & 0xf0) >> 4) * 8) + 8
+
+/**
+ * get_mux_port_count - Get the number of available ports on the Mux.
+ * @dev: The parisc device.
+ *
+ * This function is used to determine the number of ports the Mux
+ * supports.  The IODC data reports the number of ports the Mux
+ * can support, but there are cases where not all the Mux ports
+ * are connected.  This function can override the IODC and
+ * return the true port count.
+ */
+static int __init get_mux_port_count(struct parisc_device *dev)
+{
+        int status;
+        u8 iodc_data[32];
+        unsigned long bytecnt;
+
+        /* If this is the built-in Mux for the K-Class (Eole CAP/MUX),
+         * we only need to allocate resources for 1 port since the
+         * other 7 ports are not connected.
+         */
+        if(dev->id.hversion == 0x15)
+                return 1;
+
+        status = pdc_iodc_read(&bytecnt, dev->hpa.start, 0, iodc_data, 32);
+        BUG_ON(status != PDC_OK);
+
+        /* Return the number of ports specified in the iodc data. */
+        return ((((iodc_data)[4] & 0xf0) >> 4) * 8) + 8;
+}
 
 /**
  * mux_tx_empty - Check if the transmitter fifo is empty.
@@ -250,7 +283,7 @@ static void mux_read(struct uart_port *port)
  */
 static int mux_startup(struct uart_port *port)
 {
-        mod_timer(&mux_timer, jiffies + MUX_POLL_DELAY);
+        mux_ports[port->line].enabled = 1;
         return 0;
 }
 
@@ -262,6 +295,7 @@ static int mux_startup(struct uart_port *port)
  */
 static void mux_shutdown(struct uart_port *port)
 {
+        mux_ports[port->line].enabled = 0;
 }
 
 /**
@@ -319,7 +353,7 @@ static int mux_request_port(struct uart_port *port)
  * @port: Ptr to the uart_port.
  * @type: Bitmask of required configurations.
  *
- * Perform any autoconfiguration steps for the port.  This functino is
+ * Perform any autoconfiguration steps for the port.  This function is
  * called if the UPF_BOOT_AUTOCONF flag is specified for the port.
  * [Note: This is required for now because of a bug in the Serial core.
  *  rmk has already submitted a patch to linus, should be available for
@@ -357,11 +391,11 @@ static void mux_poll(unsigned long unused)
         int i;
 
         for(i = 0; i < port_cnt; ++i) {
-                if(!mux_ports[i].info)
+                if(!mux_ports[i].enabled)
                         continue;
 
-                mux_read(&mux_ports[i]);
-                mux_write(&mux_ports[i]);
+                mux_read(&mux_ports[i].port);
+                mux_write(&mux_ports[i].port);
         }
 
         mod_timer(&mux_timer, jiffies + MUX_POLL_DELAY);
@@ -371,8 +405,17 @@ static void mux_poll(unsigned long unused)
 #ifdef CONFIG_SERIAL_MUX_CONSOLE
 static void mux_console_write(struct console *co, const char *s, unsigned count)
 {
-        while(count--)
-                pdc_iodc_putc(*s++);
+        /* Wait until the FIFO drains. */
+        while(UART_GET_FIFO_CNT(&mux_ports[0].port))
+                udelay(1);
+
+        while(count--) {
+                if(*s == '\n') {
+                        UART_PUT_CHAR(&mux_ports[0].port, '\r');
+                }
+                UART_PUT_CHAR(&mux_ports[0].port, *s++);
+        }
+
 }
 
 static int mux_console_setup(struct console *co, char *options)
@@ -428,19 +471,14 @@ static struct uart_ops mux_pops = {
  */
 static int __init mux_probe(struct parisc_device *dev)
 {
-        int i, status, ports;
-        u8 iodc_data[32];
-        unsigned long bytecnt;
-        struct uart_port *port;
+        int i, status;
 
-        status = pdc_iodc_read(&bytecnt, dev->hpa.start, 0, iodc_data, 32);
-        if(status != PDC_OK) {
-                printk(KERN_ERR "Serial mux: Unable to read IODC.\n");
-                return 1;
-        }
+        int port_count = get_mux_port_count(dev);
+        printk(KERN_INFO "Serial mux driver (%d ports) Revision: 0.6\n", port_count);
 
-        ports = GET_MUX_PORTS(iodc_data);
-        printk(KERN_INFO "Serial mux driver (%d ports) Revision: 0.3\n", ports);
+        dev_set_drvdata(&dev->dev, (void *)(long)port_count);
+        request_mem_region(dev->hpa.start + MUX_OFFSET,
+                           port_count * MUX_LINE_OFFSET, "Mux");
 
         if(!port_cnt) {
                 mux_driver.cons = MUX_CONSOLE;
@@ -450,13 +488,10 @@ static int __init mux_probe(struct parisc_device *dev)
                         printk(KERN_ERR "Serial mux: Unable to register driver.\n");
                         return 1;
                 }
-
-                init_timer(&mux_timer);
-                mux_timer.function = mux_poll;
         }
 
-        for(i = 0; i < ports; ++i, ++port_cnt) {
-                port = &mux_ports[port_cnt];
+        for(i = 0; i < port_count; ++i, ++port_cnt) {
+                struct uart_port *port = &mux_ports[port_cnt].port;
                 port->iobase    = 0;
                 port->mapbase   = dev->hpa.start + MUX_OFFSET +
                                                 (i * MUX_LINE_OFFSET);
@@ -477,27 +512,73 @@ static int __init mux_probe(struct parisc_device *dev)
                  */
                 port->timeout   = HZ / 50;
                 spin_lock_init(&port->lock);
+
                 status = uart_add_one_port(&mux_driver, port);
                 BUG_ON(status);
         }
 
-#ifdef CONFIG_SERIAL_MUX_CONSOLE
-        register_console(&mux_console);
-#endif
         return 0;
 }
 
+static int __devexit mux_remove(struct parisc_device *dev)
+{
+        int i, j;
+        int port_count = (long)dev_get_drvdata(&dev->dev);
+
+        /* Find Port 0 for this card in the mux_ports list. */
+        for(i = 0; i < port_cnt; ++i) {
+                if(mux_ports[i].port.mapbase == dev->hpa.start + MUX_OFFSET)
+                        break;
+        }
+        BUG_ON(i + port_count > port_cnt);
+
+        /* Release the resources associated with each port on the device. */
+        for(j = 0; j < port_count; ++j, ++i) {
+                struct uart_port *port = &mux_ports[i].port;
+
+                uart_remove_one_port(&mux_driver, port);
+                if(port->membase)
+                        iounmap(port->membase);
+        }
+
+        release_mem_region(dev->hpa.start + MUX_OFFSET, port_count * MUX_LINE_OFFSET);
+        return 0;
+}
+
+/* Hack.  This idea was taken from the 8250_gsc.c on how to properly order
+ * the serial port detection in the proper order.   The idea is we always
+ * want the builtin mux to be detected before addin mux cards, so we
+ * specifically probe for the builtin mux cards first.
+ *
+ * This table only contains the parisc_device_id of known builtin mux
+ * devices.  All other mux cards will be detected by the generic mux_tbl.
+ */
+static struct parisc_device_id builtin_mux_tbl[] = {
+        { HPHW_A_DIRECT, HVERSION_REV_ANY_ID, 0x15, 0x0000D }, /* All K-class */
+        { HPHW_A_DIRECT, HVERSION_REV_ANY_ID, 0x44, 0x0000D }, /* E35, E45, and E55 */
+        { 0, }
+};
+
 static struct parisc_device_id mux_tbl[] = {
         { HPHW_A_DIRECT, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x0000D },
         { 0, }
 };
 
+MODULE_DEVICE_TABLE(parisc, builtin_mux_tbl);
 MODULE_DEVICE_TABLE(parisc, mux_tbl);
 
+static struct parisc_driver builtin_serial_mux_driver = {
+        .name =         "builtin_serial_mux",
+        .id_table =     builtin_mux_tbl,
+        .probe =        mux_probe,
+        .remove =       __devexit_p(mux_remove),
+};
+
 static struct parisc_driver serial_mux_driver = {
         .name =         "serial_mux",
         .id_table =     mux_tbl,
         .probe =        mux_probe,
+        .remove =       __devexit_p(mux_remove),
 };
 
 /**
@@ -507,7 +588,21 @@ static struct parisc_driver serial_mux_driver = {
  */
 static int __init mux_init(void)
 {
-        return register_parisc_driver(&serial_mux_driver);
+        register_parisc_driver(&builtin_serial_mux_driver);
+        register_parisc_driver(&serial_mux_driver);
+
+        if(port_cnt > 0) {
+                /* Start the Mux timer */
+                init_timer(&mux_timer);
+                mux_timer.function = mux_poll;
+                mod_timer(&mux_timer, jiffies + MUX_POLL_DELAY);
+
+#ifdef CONFIG_SERIAL_MUX_CONSOLE
+                register_console(&mux_console);
+#endif
+        }
+
+        return 0;
 }
 
 /**
@@ -517,14 +612,16 @@ static int __init mux_init(void)
  */
 static void __exit mux_exit(void)
 {
-        int i;
-
-        for (i = 0; i < port_cnt; i++) {
-                uart_remove_one_port(&mux_driver, &mux_ports[i]);
-                if (mux_ports[i].membase)
-                        iounmap(mux_ports[i].membase);
+        /* Delete the Mux timer. */
+        if(port_cnt > 0) {
+                del_timer(&mux_timer);
+#ifdef CONFIG_SERIAL_MUX_CONSOLE
+                unregister_console(&mux_console);
+#endif
         }
 
+        unregister_parisc_driver(&builtin_serial_mux_driver);
+        unregister_parisc_driver(&serial_mux_driver);
         uart_unregister_driver(&mux_driver);
 }