serial: replace remaining __FUNCTION__ occurrences

__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

1 files changed, 18 insertions, 18 deletions

diff --git a/drivers/serial/ioc3_serial.c b/drivers/serial/ioc3_serial.c
index 168073f12cec..4f1af71e9a1b 100644
--- a/drivers/serial/ioc3_serial.c
+++ b/drivers/serial/ioc3_serial.c
@@ -52,7 +52,7 @@ static unsigned int Submodule_slot;
 #define DPRINT_CONFIG(_x...)    ;
 //#define DPRINT_CONFIG(_x...)  printk _x
 #define NOT_PROGRESS()  ;
-//#define NOT_PROGRESS()        printk("%s : fails %d\n", __FUNCTION__, __LINE__)
+//#define NOT_PROGRESS()        printk("%s : fails %d\n", __func__, __LINE__)
 
 /* number of characters we want to transmit to the lower level at a time */
 #define MAX_CHARS               256
@@ -445,7 +445,7 @@ static int inline port_init(struct ioc3_port *port)
                 sbbr_h = &idd->vma->sbbr_h;
                 ring_pci_addr = (unsigned long __iomem)port->ip_dma_ringbuf;
                 DPRINT_CONFIG(("%s: ring_pci_addr 0x%p\n",
-                               __FUNCTION__, (void *)ring_pci_addr));
+                               __func__, (void *)ring_pci_addr));
 
                 writel((unsigned int)((uint64_t) ring_pci_addr >> 32), sbbr_h);
                 writel((unsigned int)ring_pci_addr | BUF_SIZE_BIT, sbbr_l);
@@ -593,7 +593,7 @@ config_port(struct ioc3_port *port,
 
         DPRINT_CONFIG(("%s: line %d baud %d byte_size %d stop %d parenb %d "
                         "parodd %d\n",
-                       __FUNCTION__, ((struct uart_port *)port->ip_port)->line,
+                       __func__, ((struct uart_port *)port->ip_port)->line,
                         baud, byte_size, stop_bits, parenb, parodd));
 
         if (set_baud(port, baud))
@@ -871,14 +871,14 @@ static int ioc3_set_proto(struct ioc3_port *port, int proto)
         default:
         case PROTO_RS232:
                 /* Clear the appropriate GIO pin */
-                DPRINT_CONFIG(("%s: rs232\n", __FUNCTION__));
+                DPRINT_CONFIG(("%s: rs232\n", __func__));
                 writel(0, (&port->ip_idd->vma->gppr[0]
                                         + hooks->rs422_select_pin));
                 break;
 
         case PROTO_RS422:
                 /* Set the appropriate GIO pin */
-                DPRINT_CONFIG(("%s: rs422\n", __FUNCTION__));
+                DPRINT_CONFIG(("%s: rs422\n", __func__));
                 writel(1, (&port->ip_idd->vma->gppr[0]
                                         + hooks->rs422_select_pin));
                 break;
@@ -988,7 +988,7 @@ ioc3_change_speed(struct uart_port *the_port,
         }
         baud = uart_get_baud_rate(the_port, new_termios, old_termios,
                                   MIN_BAUD_SUPPORTED, MAX_BAUD_SUPPORTED);
-        DPRINT_CONFIG(("%s: returned baud %d for line %d\n", __FUNCTION__, baud,
+        DPRINT_CONFIG(("%s: returned baud %d for line %d\n", __func__, baud,
                                 the_port->line));
 
         if (!the_port->fifosize)
@@ -1026,7 +1026,7 @@ ioc3_change_speed(struct uart_port *the_port,
         DPRINT_CONFIG(("%s : port 0x%p line %d cflag 0%o "
                        "config_port(baud %d data %d stop %d penable %d "
                         " parity %d), notification 0x%x\n",
-                       __FUNCTION__, (void *)port, the_port->line, cflag, baud,
+                       __func__, (void *)port, the_port->line, cflag, baud,
                        new_data, new_stop, new_parity_enable, new_parity,
                        the_port->ignore_status_mask));
 
@@ -1919,7 +1919,7 @@ static inline int ioc3_serial_core_attach( struct ioc3_submodule *is,
         struct pci_dev *pdev = idd->pdev;
 
         DPRINT_CONFIG(("%s: attach pdev 0x%p - card_ptr 0x%p\n",
-                       __FUNCTION__, pdev, (void *)card_ptr));
+                       __func__, pdev, (void *)card_ptr));
 
         if (!card_ptr)
                 return -ENODEV;
@@ -1933,7 +1933,7 @@ static inline int ioc3_serial_core_attach( struct ioc3_submodule *is,
                 port->ip_port = the_port;
 
                 DPRINT_CONFIG(("%s: attach the_port 0x%p / port 0x%p [%d/%d]\n",
-                        __FUNCTION__, (void *)the_port, (void *)port,
+                        __func__, (void *)the_port, (void *)port,
                                 phys_port, ii));
 
                 /* membase, iobase and mapbase just need to be non-0 */
@@ -1950,7 +1950,7 @@ static inline int ioc3_serial_core_attach( struct ioc3_submodule *is,
                 if (uart_add_one_port(&ioc3_uart, the_port) < 0) {
                         printk(KERN_WARNING
                           "%s: unable to add port %d bus %d\n",
-                               __FUNCTION__, the_port->line, pdev->bus->number);
+                               __func__, the_port->line, pdev->bus->number);
                 } else {
                         DPRINT_CONFIG(("IOC3 serial port %d irq %d bus %d\n",
                           the_port->line, the_port->irq, pdev->bus->number));
@@ -2017,7 +2017,7 @@ ioc3uart_probe(struct ioc3_submodule *is, struct ioc3_driver_data *idd)
         struct ioc3_port *ports[PORTS_PER_CARD];
         int phys_port;
 
-        DPRINT_CONFIG(("%s (0x%p, 0x%p)\n", __FUNCTION__, is, idd));
+        DPRINT_CONFIG(("%s (0x%p, 0x%p)\n", __func__, is, idd));
 
         card_ptr = kzalloc(sizeof(struct ioc3_card), GFP_KERNEL);
         if (!card_ptr) {
@@ -2067,7 +2067,7 @@ ioc3uart_probe(struct ioc3_submodule *is, struct ioc3_driver_data *idd)
 
                         DPRINT_CONFIG(("%s : Port A ip_serial_regs 0x%p "
                                        "ip_uart_regs 0x%p\n",
-                                       __FUNCTION__,
+                                       __func__,
                                        (void *)port->ip_serial_regs,
                                        (void *)port->ip_uart_regs));
 
@@ -2082,7 +2082,7 @@ ioc3uart_probe(struct ioc3_submodule *is, struct ioc3_driver_data *idd)
                         DPRINT_CONFIG(("%s : Port A ip_cpu_ringbuf 0x%p "
                                        "ip_dma_ringbuf 0x%p, ip_inring 0x%p "
                                         "ip_outring 0x%p\n",
-                                       __FUNCTION__,
+                                       __func__,
                                        (void *)port->ip_cpu_ringbuf,
                                        (void *)port->ip_dma_ringbuf,
                                        (void *)port->ip_inring,
@@ -2094,7 +2094,7 @@ ioc3uart_probe(struct ioc3_submodule *is, struct ioc3_driver_data *idd)
 
                         DPRINT_CONFIG(("%s : Port B ip_serial_regs 0x%p "
                                        "ip_uart_regs 0x%p\n",
-                                       __FUNCTION__,
+                                       __func__,
                                        (void *)port->ip_serial_regs,
                                        (void *)port->ip_uart_regs));
 
@@ -2108,7 +2108,7 @@ ioc3uart_probe(struct ioc3_submodule *is, struct ioc3_driver_data *idd)
                         DPRINT_CONFIG(("%s : Port B ip_cpu_ringbuf 0x%p "
                                        "ip_dma_ringbuf 0x%p, ip_inring 0x%p "
                                         "ip_outring 0x%p\n",
-                                       __FUNCTION__,
+                                       __func__,
                                        (void *)port->ip_cpu_ringbuf,
                                        (void *)port->ip_dma_ringbuf,
                                        (void *)port->ip_inring,
@@ -2116,7 +2116,7 @@ ioc3uart_probe(struct ioc3_submodule *is, struct ioc3_driver_data *idd)
                 }
 
                 DPRINT_CONFIG(("%s : port %d [addr 0x%p] card_ptr 0x%p",
-                               __FUNCTION__,
+                               __func__,
                                phys_port, (void *)port, (void *)card_ptr));
                 DPRINT_CONFIG((" ip_serial_regs 0x%p ip_uart_regs 0x%p\n",
                                (void *)port->ip_serial_regs,
@@ -2127,7 +2127,7 @@ ioc3uart_probe(struct ioc3_submodule *is, struct ioc3_driver_data *idd)
 
                 DPRINT_CONFIG(("%s: phys_port %d port 0x%p inring 0x%p "
                                "outring 0x%p\n",
-                               __FUNCTION__,
+                               __func__,
                                phys_port, (void *)port,
                                (void *)port->ip_inring,
                                (void *)port->ip_outring));
@@ -2170,7 +2170,7 @@ static int __devinit ioc3uart_init(void)
         if ((ret = uart_register_driver(&ioc3_uart)) < 0) {
                 printk(KERN_WARNING
                        "%s: Couldn't register IOC3 uart serial driver\n",
-                       __FUNCTION__);
+                       __func__);
                 return ret;
         }
         ret = ioc3_register_submodule(&ioc3uart_submodule);