cpm_uart: Modem control lines support

This patch replaces the get_mctrl/set_mctrl stubs with modem control line
read/write access through the GPIO lib.

Available modem control lines are described in the device tree using GPIO
bindings. The driver expect a GPIO pin for each of the CTS, RTS, DCD, DSR,
DTR and RI signals. Unused control lines can be left out.

Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

2 files changed, 47 insertions, 3 deletions

diff --git a/drivers/serial/cpm_uart/cpm_uart.h b/drivers/serial/cpm_uart/cpm_uart.h
index 5c76e0ae0582..5999ef5ac78e 100644
--- a/drivers/serial/cpm_uart/cpm_uart.h
+++ b/drivers/serial/cpm_uart/cpm_uart.h
@@ -50,6 +50,15 @@
 
 #define SCC_WAIT_CLOSING 100
 
+#define GPIO_CTS        0
+#define GPIO_RTS        1
+#define GPIO_DCD        2
+#define GPIO_DSR        3
+#define GPIO_DTR        4
+#define GPIO_RI         5
+
+#define NUM_GPIOS       (GPIO_RI+1)
+
 struct uart_cpm_port {
         struct uart_port        port;
         u16                     rx_nrfifos;
@@ -82,6 +91,7 @@ struct uart_cpm_port {
         int                     wait_closing;
         /* value to combine with opcode to form cpm command */
         u32                     command;
+        int                     gpios[NUM_GPIOS];
 };
 
 extern int cpm_uart_nr;
diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
index a4f86927a74b..5e0c17f71653 100644
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -43,6 +43,8 @@
 #include <linux/dma-mapping.h>
 #include <linux/fs_uart_pd.h>
 #include <linux/of_platform.h>
+#include <linux/gpio.h>
+#include <linux/of_gpio.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -96,13 +98,41 @@ static unsigned int cpm_uart_tx_empty(struct uart_port *port)
 
 static void cpm_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
 {
-        /* Whee. Do nothing. */
+        struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
+
+        if (pinfo->gpios[GPIO_RTS] >= 0)
+                gpio_set_value(pinfo->gpios[GPIO_RTS], !(mctrl & TIOCM_RTS));
+
+        if (pinfo->gpios[GPIO_DTR] >= 0)
+                gpio_set_value(pinfo->gpios[GPIO_DTR], !(mctrl & TIOCM_DTR));
 }
 
 static unsigned int cpm_uart_get_mctrl(struct uart_port *port)
 {
-        /* Whee. Do nothing. */
-        return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
+        struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
+        unsigned int mctrl = TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
+
+        if (pinfo->gpios[GPIO_CTS] >= 0) {
+                if (gpio_get_value(pinfo->gpios[GPIO_CTS]))
+                        mctrl &= ~TIOCM_CTS;
+        }
+
+        if (pinfo->gpios[GPIO_DSR] >= 0) {
+                if (gpio_get_value(pinfo->gpios[GPIO_DSR]))
+                        mctrl &= ~TIOCM_DSR;
+        }
+
+        if (pinfo->gpios[GPIO_DCD] >= 0) {
+                if (gpio_get_value(pinfo->gpios[GPIO_DCD]))
+                        mctrl &= ~TIOCM_CAR;
+        }
+
+        if (pinfo->gpios[GPIO_RI] >= 0) {
+                if (!gpio_get_value(pinfo->gpios[GPIO_RI]))
+                        mctrl |= TIOCM_RNG;
+        }
+
+        return mctrl;
 }
 
 /*
@@ -991,6 +1021,7 @@ static int cpm_uart_init_port(struct device_node *np,
         void __iomem *mem, *pram;
         int len;
         int ret;
+        int i;
 
         data = of_get_property(np, "fsl,cpm-brg", &len);
         if (!data || len != 4) {
@@ -1050,6 +1081,9 @@ static int cpm_uart_init_port(struct device_node *np,
                 goto out_pram;
         }
 
+        for (i = 0; i < NUM_GPIOS; i++)
+                pinfo->gpios[i] = of_get_gpio(np, i);
+
         return cpm_uart_request_port(&pinfo->port);
 
 out_pram: