Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 609 insertions, 0 deletions

diff --git a/drivers/serial/clps711x.c b/drivers/serial/clps711x.c
new file mode 100644
index 000000000000..16592fae47f3
--- /dev/null
+++ b/drivers/serial/clps711x.c
@@ -0,0 +1,609 @@
+/*
+ *  linux/drivers/char/clps711x.c
+ *
+ *  Driver for CLPS711x serial ports
+ *
+ *  Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
+ *
+ *  Copyright 1999 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ *  $Id: clps711x.c,v 1.42 2002/07/28 10:03:28 rmk Exp $
+ *
+ */
+#include <linux/config.h>
+
+#if defined(CONFIG_SERIAL_CLPS711X_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/spinlock.h>
+#include <linux/device.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/hardware/clps7111.h>
+
+#define UART_NR         2
+
+#define SERIAL_CLPS711X_MAJOR   204
+#define SERIAL_CLPS711X_MINOR   40
+#define SERIAL_CLPS711X_NR      UART_NR
+
+/*
+ * We use the relevant SYSCON register as a base address for these ports.
+ */
+#define UBRLCR(port)            ((port)->iobase + UBRLCR1 - SYSCON1)
+#define UARTDR(port)            ((port)->iobase + UARTDR1 - SYSCON1)
+#define SYSFLG(port)            ((port)->iobase + SYSFLG1 - SYSCON1)
+#define SYSCON(port)            ((port)->iobase + SYSCON1 - SYSCON1)
+
+#define TX_IRQ(port)            ((port)->irq)
+#define RX_IRQ(port)            ((port)->irq + 1)
+
+#define UART_ANY_ERR            (UARTDR_FRMERR | UARTDR_PARERR | UARTDR_OVERR)
+
+#define tx_enabled(port)        ((port)->unused[0])
+
+static void
+clps711xuart_stop_tx(struct uart_port *port, unsigned int tty_stop)
+{
+        if (tx_enabled(port)) {
+                disable_irq(TX_IRQ(port));
+                tx_enabled(port) = 0;
+        }
+}
+
+static void
+clps711xuart_start_tx(struct uart_port *port, unsigned int tty_start)
+{
+        if (!tx_enabled(port)) {
+                enable_irq(TX_IRQ(port));
+                tx_enabled(port) = 1;
+        }
+}
+
+static void clps711xuart_stop_rx(struct uart_port *port)
+{
+        disable_irq(RX_IRQ(port));
+}
+
+static void clps711xuart_enable_ms(struct uart_port *port)
+{
+}
+
+static irqreturn_t clps711xuart_int_rx(int irq, void *dev_id, struct pt_regs *regs)
+{
+        struct uart_port *port = dev_id;
+        struct tty_struct *tty = port->info->tty;
+        unsigned int status, ch, flg, ignored = 0;
+
+        status = clps_readl(SYSFLG(port));
+        while (!(status & SYSFLG_URXFE)) {
+                ch = clps_readl(UARTDR(port));
+
+                if (tty->flip.count >= TTY_FLIPBUF_SIZE)
+                        goto ignore_char;
+                port->icount.rx++;
+
+                flg = TTY_NORMAL;
+
+                /*
+                 * Note that the error handling code is
+                 * out of the main execution path
+                 */
+                if (ch & UART_ANY_ERR)
+                        goto handle_error;
+
+                if (uart_handle_sysrq_char(port, ch, regs))
+                        goto ignore_char;
+
+        error_return:
+                tty_insert_flip_char(tty, ch, flg);
+        ignore_char:
+                status = clps_readl(SYSFLG(port));
+        }
+ out:
+        tty_flip_buffer_push(tty);
+        return IRQ_HANDLED;
+
+ handle_error:
+        if (ch & UARTDR_PARERR)
+                port->icount.parity++;
+        else if (ch & UARTDR_FRMERR)
+                port->icount.frame++;
+        if (ch & UARTDR_OVERR)
+                port->icount.overrun++;
+
+        if (ch & port->ignore_status_mask) {
+                if (++ignored > 100)
+                        goto out;
+                goto ignore_char;
+        }
+        ch &= port->read_status_mask;
+
+        if (ch & UARTDR_PARERR)
+                flg = TTY_PARITY;
+        else if (ch & UARTDR_FRMERR)
+                flg = TTY_FRAME;
+
+        if (ch & UARTDR_OVERR) {
+                /*
+                 * CHECK: does overrun affect the current character?
+                 * ASSUMPTION: it does not.
+                 */
+                tty_insert_flip_char(tty, ch, flg);
+                ch = 0;
+                flg = TTY_OVERRUN;
+        }
+#ifdef SUPPORT_SYSRQ
+        port->sysrq = 0;
+#endif
+        goto error_return;
+}
+
+static irqreturn_t clps711xuart_int_tx(int irq, void *dev_id, struct pt_regs *regs)
+{
+        struct uart_port *port = dev_id;
+        struct circ_buf *xmit = &port->info->xmit;
+        int count;
+
+        if (port->x_char) {
+                clps_writel(port->x_char, UARTDR(port));
+                port->icount.tx++;
+                port->x_char = 0;
+                return IRQ_HANDLED;
+        }
+        if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+                clps711xuart_stop_tx(port, 0);
+                return IRQ_HANDLED;
+        }
+
+        count = port->fifosize >> 1;
+        do {
+                clps_writel(xmit->buf[xmit->tail], UARTDR(port));
+                xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+                port->icount.tx++;
+                if (uart_circ_empty(xmit))
+                        break;
+        } while (--count > 0);
+
+        if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+                uart_write_wakeup(port);
+
+        if (uart_circ_empty(xmit))
+                clps711xuart_stop_tx(port, 0);
+
+        return IRQ_HANDLED;
+}
+
+static unsigned int clps711xuart_tx_empty(struct uart_port *port)
+{
+        unsigned int status = clps_readl(SYSFLG(port));
+        return status & SYSFLG_UBUSY ? 0 : TIOCSER_TEMT;
+}
+
+static unsigned int clps711xuart_get_mctrl(struct uart_port *port)
+{
+        unsigned int port_addr;
+        unsigned int result = 0;
+        unsigned int status;
+
+        port_addr = SYSFLG(port);
+        if (port_addr == SYSFLG1) {
+                status = clps_readl(SYSFLG1);
+                if (status & SYSFLG1_DCD)
+                        result |= TIOCM_CAR;
+                if (status & SYSFLG1_DSR)
+                        result |= TIOCM_DSR;
+                if (status & SYSFLG1_CTS)
+                        result |= TIOCM_CTS;
+        }
+
+        return result;
+}
+
+static void
+clps711xuart_set_mctrl_null(struct uart_port *port, unsigned int mctrl)
+{
+}
+
+static void clps711xuart_break_ctl(struct uart_port *port, int break_state)
+{
+        unsigned long flags;
+        unsigned int ubrlcr;
+
+        spin_lock_irqsave(&port->lock, flags);
+        ubrlcr = clps_readl(UBRLCR(port));
+        if (break_state == -1)
+                ubrlcr |= UBRLCR_BREAK;
+        else
+                ubrlcr &= ~UBRLCR_BREAK;
+        clps_writel(ubrlcr, UBRLCR(port));
+        spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static int clps711xuart_startup(struct uart_port *port)
+{
+        unsigned int syscon;
+        int retval;
+
+        tx_enabled(port) = 1;
+
+        /*
+         * Allocate the IRQs
+         */
+        retval = request_irq(TX_IRQ(port), clps711xuart_int_tx, 0,
+                             "clps711xuart_tx", port);
+        if (retval)
+                return retval;
+
+        retval = request_irq(RX_IRQ(port), clps711xuart_int_rx, 0,
+                             "clps711xuart_rx", port);
+        if (retval) {
+                free_irq(TX_IRQ(port), port);
+                return retval;
+        }
+
+        /*
+         * enable the port
+         */
+        syscon = clps_readl(SYSCON(port));
+        syscon |= SYSCON_UARTEN;
+        clps_writel(syscon, SYSCON(port));
+
+        return 0;
+}
+
+static void clps711xuart_shutdown(struct uart_port *port)
+{
+        unsigned int ubrlcr, syscon;
+
+        /*
+         * Free the interrupt
+         */
+        free_irq(TX_IRQ(port), port);   /* TX interrupt */
+        free_irq(RX_IRQ(port), port);   /* RX interrupt */
+
+        /*
+         * disable the port
+         */
+        syscon = clps_readl(SYSCON(port));
+        syscon &= ~SYSCON_UARTEN;
+        clps_writel(syscon, SYSCON(port));
+
+        /*
+         * disable break condition and fifos
+         */
+        ubrlcr = clps_readl(UBRLCR(port));
+        ubrlcr &= ~(UBRLCR_FIFOEN | UBRLCR_BREAK);
+        clps_writel(ubrlcr, UBRLCR(port));
+}
+
+static void
+clps711xuart_set_termios(struct uart_port *port, struct termios *termios,
+                         struct termios *old)
+{
+        unsigned int ubrlcr, baud, quot;
+        unsigned long flags;
+
+        /*
+         * We don't implement CREAD.
+         */
+        termios->c_cflag |= CREAD;
+
+        /*
+         * Ask the core to calculate the divisor for us.
+         */
+        baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); 
+        quot = uart_get_divisor(port, baud);
+
+        switch (termios->c_cflag & CSIZE) {
+        case CS5:
+                ubrlcr = UBRLCR_WRDLEN5;
+                break;
+        case CS6:
+                ubrlcr = UBRLCR_WRDLEN6;
+                break;
+        case CS7:
+                ubrlcr = UBRLCR_WRDLEN7;
+                break;
+        default: // CS8
+                ubrlcr = UBRLCR_WRDLEN8;
+                break;
+        }
+        if (termios->c_cflag & CSTOPB)
+                ubrlcr |= UBRLCR_XSTOP;
+        if (termios->c_cflag & PARENB) {
+                ubrlcr |= UBRLCR_PRTEN;
+                if (!(termios->c_cflag & PARODD))
+                        ubrlcr |= UBRLCR_EVENPRT;
+        }
+        if (port->fifosize > 1)
+                ubrlcr |= UBRLCR_FIFOEN;
+
+        spin_lock_irqsave(&port->lock, flags);
+
+        /*
+         * Update the per-port timeout.
+         */
+        uart_update_timeout(port, termios->c_cflag, baud);
+
+        port->read_status_mask = UARTDR_OVERR;
+        if (termios->c_iflag & INPCK)
+                port->read_status_mask |= UARTDR_PARERR | UARTDR_FRMERR;
+
+        /*
+         * Characters to ignore
+         */
+        port->ignore_status_mask = 0;
+        if (termios->c_iflag & IGNPAR)
+                port->ignore_status_mask |= UARTDR_FRMERR | UARTDR_PARERR;
+        if (termios->c_iflag & IGNBRK) {
+                /*
+                 * If we're ignoring parity and break indicators,
+                 * ignore overruns to (for real raw support).
+                 */
+                if (termios->c_iflag & IGNPAR)
+                        port->ignore_status_mask |= UARTDR_OVERR;
+        }
+
+        quot -= 1;
+
+        clps_writel(ubrlcr | quot, UBRLCR(port));
+
+        spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static const char *clps711xuart_type(struct uart_port *port)
+{
+        return port->type == PORT_CLPS711X ? "CLPS711x" : NULL;
+}
+
+/*
+ * Configure/autoconfigure the port.
+ */
+static void clps711xuart_config_port(struct uart_port *port, int flags)
+{
+        if (flags & UART_CONFIG_TYPE)
+                port->type = PORT_CLPS711X;
+}
+
+static void clps711xuart_release_port(struct uart_port *port)
+{
+}
+
+static int clps711xuart_request_port(struct uart_port *port)
+{
+        return 0;
+}
+
+static struct uart_ops clps711x_pops = {
+        .tx_empty       = clps711xuart_tx_empty,
+        .set_mctrl      = clps711xuart_set_mctrl_null,
+        .get_mctrl      = clps711xuart_get_mctrl,
+        .stop_tx        = clps711xuart_stop_tx,
+        .start_tx       = clps711xuart_start_tx,
+        .stop_rx        = clps711xuart_stop_rx,
+        .enable_ms      = clps711xuart_enable_ms,
+        .break_ctl      = clps711xuart_break_ctl,
+        .startup        = clps711xuart_startup,
+        .shutdown       = clps711xuart_shutdown,
+        .set_termios    = clps711xuart_set_termios,
+        .type           = clps711xuart_type,
+        .config_port    = clps711xuart_config_port,
+        .release_port   = clps711xuart_release_port,
+        .request_port   = clps711xuart_request_port,
+};
+
+static struct uart_port clps711x_ports[UART_NR] = {
+        {
+                .iobase         = SYSCON1,
+                .irq            = IRQ_UTXINT1, /* IRQ_URXINT1, IRQ_UMSINT */
+                .uartclk        = 3686400,
+                .fifosize       = 16,
+                .ops            = &clps711x_pops,
+                .line           = 0,
+                .flags          = ASYNC_BOOT_AUTOCONF,
+        },
+        {
+                .iobase         = SYSCON2,
+                .irq            = IRQ_UTXINT2, /* IRQ_URXINT2 */
+                .uartclk        = 3686400,
+                .fifosize       = 16,
+                .ops            = &clps711x_pops,
+                .line           = 1,
+                .flags          = ASYNC_BOOT_AUTOCONF,
+        }
+};
+
+#ifdef CONFIG_SERIAL_CLPS711X_CONSOLE
+/*
+ *      Print a string to the serial port trying not to disturb
+ *      any possible real use of the port...
+ *
+ *      The console_lock must be held when we get here.
+ *
+ *      Note that this is called with interrupts already disabled
+ */
+static void
+clps711xuart_console_write(struct console *co, const char *s,
+                           unsigned int count)
+{
+        struct uart_port *port = clps711x_ports + co->index;
+        unsigned int status, syscon;
+        int i;
+
+        /*
+         *      Ensure that the port is enabled.
+         */
+        syscon = clps_readl(SYSCON(port));
+        clps_writel(syscon | SYSCON_UARTEN, SYSCON(port));
+
+        /*
+         *      Now, do each character
+         */
+        for (i = 0; i < count; i++) {
+                do {
+                        status = clps_readl(SYSFLG(port));
+                } while (status & SYSFLG_UTXFF);
+                clps_writel(s[i], UARTDR(port));
+                if (s[i] == '\n') {
+                        do {
+                                status = clps_readl(SYSFLG(port));
+                        } while (status & SYSFLG_UTXFF);
+                        clps_writel('\r', UARTDR(port));
+                }
+        }
+
+        /*
+         *      Finally, wait for transmitter to become empty
+         *      and restore the uart state.
+         */
+        do {
+                status = clps_readl(SYSFLG(port));
+        } while (status & SYSFLG_UBUSY);
+
+        clps_writel(syscon, SYSCON(port));
+}
+
+static void __init
+clps711xuart_console_get_options(struct uart_port *port, int *baud,
+                                 int *parity, int *bits)
+{
+        if (clps_readl(SYSCON(port)) & SYSCON_UARTEN) {
+                unsigned int ubrlcr, quot;
+
+                ubrlcr = clps_readl(UBRLCR(port));
+
+                *parity = 'n';
+                if (ubrlcr & UBRLCR_PRTEN) {
+                        if (ubrlcr & UBRLCR_EVENPRT)
+                                *parity = 'e';
+                        else
+                                *parity = 'o';
+                }
+
+                if ((ubrlcr & UBRLCR_WRDLEN_MASK) == UBRLCR_WRDLEN7)
+                        *bits = 7;
+                else
+                        *bits = 8;
+
+                quot = ubrlcr & UBRLCR_BAUD_MASK;
+                *baud = port->uartclk / (16 * (quot + 1));
+        }
+}
+
+static int __init clps711xuart_console_setup(struct console *co, char *options)
+{
+        struct uart_port *port;
+        int baud = 38400;
+        int bits = 8;
+        int parity = 'n';
+        int flow = 'n';
+
+        /*
+         * Check whether an invalid uart number has been specified, and
+         * if so, search for the first available port that does have
+         * console support.
+         */
+        port = uart_get_console(clps711x_ports, UART_NR, co);
+
+        if (options)
+                uart_parse_options(options, &baud, &parity, &bits, &flow);
+        else
+                clps711xuart_console_get_options(port, &baud, &parity, &bits);
+
+        return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+extern struct uart_driver clps711x_reg;
+static struct console clps711x_console = {
+        .name           = "ttyCL",
+        .write          = clps711xuart_console_write,
+        .device         = uart_console_device,
+        .setup          = clps711xuart_console_setup,
+        .flags          = CON_PRINTBUFFER,
+        .index          = -1,
+        .data           = &clps711x_reg,
+};
+
+static int __init clps711xuart_console_init(void)
+{
+        register_console(&clps711x_console);
+        return 0;
+}
+console_initcall(clps711xuart_console_init);
+
+#define CLPS711X_CONSOLE        &clps711x_console
+#else
+#define CLPS711X_CONSOLE        NULL
+#endif
+
+static struct uart_driver clps711x_reg = {
+        .driver_name            = "ttyCL",
+        .dev_name               = "ttyCL",
+        .major                  = SERIAL_CLPS711X_MAJOR,
+        .minor                  = SERIAL_CLPS711X_MINOR,
+        .nr                     = UART_NR,
+
+        .cons                   = CLPS711X_CONSOLE,
+};
+
+static int __init clps711xuart_init(void)
+{
+        int ret, i;
+
+        printk(KERN_INFO "Serial: CLPS711x driver $Revision: 1.42 $\n");
+
+        ret = uart_register_driver(&clps711x_reg);
+        if (ret)
+                return ret;
+
+        for (i = 0; i < UART_NR; i++)
+                uart_add_one_port(&clps711x_reg, &clps711x_ports[i]);
+
+        return 0;
+}
+
+static void __exit clps711xuart_exit(void)
+{
+        int i;
+
+        for (i = 0; i < UART_NR; i++)
+                uart_remove_one_port(&clps711x_reg, &clps711x_ports[i]);
+
+        uart_unregister_driver(&clps711x_reg);
+}
+
+module_init(clps711xuart_init);
+module_exit(clps711xuart_exit);
+
+MODULE_AUTHOR("Deep Blue Solutions Ltd");
+MODULE_DESCRIPTION("CLPS-711x generic serial driver $Revision: 1.42 $");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_CHARDEV(SERIAL_CLPS711X_MAJOR, SERIAL_CLPS711X_MINOR);