aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/serial/bfin_5xx.c
diff options
context:
space:
mode:
authorGreg Kroah-Hartman <gregkh@suse.de>2011-01-13 15:10:18 -0500
committerGreg Kroah-Hartman <gregkh@suse.de>2011-01-13 15:10:18 -0500
commitab4382d27412e7e3e7c936e8d50d8888dfac3df8 (patch)
tree51d96dea2431140358784b6b426715f37f74fd53 /drivers/serial/bfin_5xx.c
parent728674a7e466628df2aeec6d11a2ae1ef968fb67 (diff)
tty: move drivers/serial/ to drivers/tty/serial/
The serial drivers are really just tty drivers, so move them to drivers/tty/ to make things a bit neater overall. This is part of the tty/serial driver movement proceedure as proposed by Arnd Bergmann and approved by everyone involved a number of months ago. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Rogier Wolff <R.E.Wolff@bitwizard.nl> Cc: Michael H. Warfield <mhw@wittsend.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers/serial/bfin_5xx.c')
-rw-r--r--drivers/serial/bfin_5xx.c1600
1 files changed, 0 insertions, 1600 deletions
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
deleted file mode 100644
index e381b895b04d..000000000000
--- a/drivers/serial/bfin_5xx.c
+++ /dev/null
@@ -1,1600 +0,0 @@
1/*
2 * Blackfin On-Chip Serial Driver
3 *
4 * Copyright 2006-2010 Analog Devices Inc.
5 *
6 * Enter bugs at http://blackfin.uclinux.org/
7 *
8 * Licensed under the GPL-2 or later.
9 */
10
11#if defined(CONFIG_SERIAL_BFIN_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
12#define SUPPORT_SYSRQ
13#endif
14
15#define DRIVER_NAME "bfin-uart"
16#define pr_fmt(fmt) DRIVER_NAME ": " fmt
17
18#include <linux/module.h>
19#include <linux/ioport.h>
20#include <linux/gfp.h>
21#include <linux/io.h>
22#include <linux/init.h>
23#include <linux/console.h>
24#include <linux/sysrq.h>
25#include <linux/platform_device.h>
26#include <linux/tty.h>
27#include <linux/tty_flip.h>
28#include <linux/serial_core.h>
29#include <linux/gpio.h>
30#include <linux/irq.h>
31#include <linux/kgdb.h>
32#include <linux/slab.h>
33#include <linux/dma-mapping.h>
34
35#include <asm/portmux.h>
36#include <asm/cacheflush.h>
37#include <asm/dma.h>
38
39#define port_membase(uart) (((struct bfin_serial_port *)(uart))->port.membase)
40#define get_lsr_cache(uart) (((struct bfin_serial_port *)(uart))->lsr)
41#define put_lsr_cache(uart, v) (((struct bfin_serial_port *)(uart))->lsr = (v))
42#include <asm/bfin_serial.h>
43
44#ifdef CONFIG_SERIAL_BFIN_MODULE
45# undef CONFIG_EARLY_PRINTK
46#endif
47
48#ifdef CONFIG_SERIAL_BFIN_MODULE
49# undef CONFIG_EARLY_PRINTK
50#endif
51
52/* UART name and device definitions */
53#define BFIN_SERIAL_DEV_NAME "ttyBF"
54#define BFIN_SERIAL_MAJOR 204
55#define BFIN_SERIAL_MINOR 64
56
57static struct bfin_serial_port *bfin_serial_ports[BFIN_UART_NR_PORTS];
58
59#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \
60 defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE)
61
62# ifndef CONFIG_SERIAL_BFIN_PIO
63# error KGDB only support UART in PIO mode.
64# endif
65
66static int kgdboc_port_line;
67static int kgdboc_break_enabled;
68#endif
69/*
70 * Setup for console. Argument comes from the menuconfig
71 */
72#define DMA_RX_XCOUNT 512
73#define DMA_RX_YCOUNT (PAGE_SIZE / DMA_RX_XCOUNT)
74
75#define DMA_RX_FLUSH_JIFFIES (HZ / 50)
76
77#ifdef CONFIG_SERIAL_BFIN_DMA
78static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart);
79#else
80static void bfin_serial_tx_chars(struct bfin_serial_port *uart);
81#endif
82
83static void bfin_serial_reset_irda(struct uart_port *port);
84
85#if defined(CONFIG_SERIAL_BFIN_CTSRTS) || \
86 defined(CONFIG_SERIAL_BFIN_HARD_CTSRTS)
87static unsigned int bfin_serial_get_mctrl(struct uart_port *port)
88{
89 struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
90 if (uart->cts_pin < 0)
91 return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
92
93 /* CTS PIN is negative assertive. */
94 if (UART_GET_CTS(uart))
95 return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
96 else
97 return TIOCM_DSR | TIOCM_CAR;
98}
99
100static void bfin_serial_set_mctrl(struct uart_port *port, unsigned int mctrl)
101{
102 struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
103 if (uart->rts_pin < 0)
104 return;
105
106 /* RTS PIN is negative assertive. */
107 if (mctrl & TIOCM_RTS)
108 UART_ENABLE_RTS(uart);
109 else
110 UART_DISABLE_RTS(uart);
111}
112
113/*
114 * Handle any change of modem status signal.
115 */
116static irqreturn_t bfin_serial_mctrl_cts_int(int irq, void *dev_id)
117{
118 struct bfin_serial_port *uart = dev_id;
119 unsigned int status;
120
121 status = bfin_serial_get_mctrl(&uart->port);
122 uart_handle_cts_change(&uart->port, status & TIOCM_CTS);
123#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
124 uart->scts = 1;
125 UART_CLEAR_SCTS(uart);
126 UART_CLEAR_IER(uart, EDSSI);
127#endif
128
129 return IRQ_HANDLED;
130}
131#else
132static unsigned int bfin_serial_get_mctrl(struct uart_port *port)
133{
134 return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
135}
136
137static void bfin_serial_set_mctrl(struct uart_port *port, unsigned int mctrl)
138{
139}
140#endif
141
142/*
143 * interrupts are disabled on entry
144 */
145static void bfin_serial_stop_tx(struct uart_port *port)
146{
147 struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
148#ifdef CONFIG_SERIAL_BFIN_DMA
149 struct circ_buf *xmit = &uart->port.state->xmit;
150#endif
151
152 while (!(UART_GET_LSR(uart) & TEMT))
153 cpu_relax();
154
155#ifdef CONFIG_SERIAL_BFIN_DMA
156 disable_dma(uart->tx_dma_channel);
157 xmit->tail = (xmit->tail + uart->tx_count) & (UART_XMIT_SIZE - 1);
158 uart->port.icount.tx += uart->tx_count;
159 uart->tx_count = 0;
160 uart->tx_done = 1;
161#else
162#ifdef CONFIG_BF54x
163 /* Clear TFI bit */
164 UART_PUT_LSR(uart, TFI);
165#endif
166 UART_CLEAR_IER(uart, ETBEI);
167#endif
168}
169
170/*
171 * port is locked and interrupts are disabled
172 */
173static void bfin_serial_start_tx(struct uart_port *port)
174{
175 struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
176 struct tty_struct *tty = uart->port.state->port.tty;
177
178#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
179 if (uart->scts && !(bfin_serial_get_mctrl(&uart->port) & TIOCM_CTS)) {
180 uart->scts = 0;
181 uart_handle_cts_change(&uart->port, uart->scts);
182 }
183#endif
184
185 /*
186 * To avoid losting RX interrupt, we reset IR function
187 * before sending data.
188 */
189 if (tty->termios->c_line == N_IRDA)
190 bfin_serial_reset_irda(port);
191
192#ifdef CONFIG_SERIAL_BFIN_DMA
193 if (uart->tx_done)
194 bfin_serial_dma_tx_chars(uart);
195#else
196 UART_SET_IER(uart, ETBEI);
197 bfin_serial_tx_chars(uart);
198#endif
199}
200
201/*
202 * Interrupts are enabled
203 */
204static void bfin_serial_stop_rx(struct uart_port *port)
205{
206 struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
207
208 UART_CLEAR_IER(uart, ERBFI);
209}
210
211/*
212 * Set the modem control timer to fire immediately.
213 */
214static void bfin_serial_enable_ms(struct uart_port *port)
215{
216}
217
218
219#if ANOMALY_05000363 && defined(CONFIG_SERIAL_BFIN_PIO)
220# define UART_GET_ANOMALY_THRESHOLD(uart) ((uart)->anomaly_threshold)
221# define UART_SET_ANOMALY_THRESHOLD(uart, v) ((uart)->anomaly_threshold = (v))
222#else
223# define UART_GET_ANOMALY_THRESHOLD(uart) 0
224# define UART_SET_ANOMALY_THRESHOLD(uart, v)
225#endif
226
227#ifdef CONFIG_SERIAL_BFIN_PIO
228static void bfin_serial_rx_chars(struct bfin_serial_port *uart)
229{
230 struct tty_struct *tty = NULL;
231 unsigned int status, ch, flg;
232 static struct timeval anomaly_start = { .tv_sec = 0 };
233
234 status = UART_GET_LSR(uart);
235 UART_CLEAR_LSR(uart);
236
237 ch = UART_GET_CHAR(uart);
238 uart->port.icount.rx++;
239
240#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \
241 defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE)
242 if (kgdb_connected && kgdboc_port_line == uart->port.line
243 && kgdboc_break_enabled)
244 if (ch == 0x3) {/* Ctrl + C */
245 kgdb_breakpoint();
246 return;
247 }
248
249 if (!uart->port.state || !uart->port.state->port.tty)
250 return;
251#endif
252 tty = uart->port.state->port.tty;
253
254 if (ANOMALY_05000363) {
255 /* The BF533 (and BF561) family of processors have a nice anomaly
256 * where they continuously generate characters for a "single" break.
257 * We have to basically ignore this flood until the "next" valid
258 * character comes across. Due to the nature of the flood, it is
259 * not possible to reliably catch bytes that are sent too quickly
260 * after this break. So application code talking to the Blackfin
261 * which sends a break signal must allow at least 1.5 character
262 * times after the end of the break for things to stabilize. This
263 * timeout was picked as it must absolutely be larger than 1
264 * character time +/- some percent. So 1.5 sounds good. All other
265 * Blackfin families operate properly. Woo.
266 */
267 if (anomaly_start.tv_sec) {
268 struct timeval curr;
269 suseconds_t usecs;
270
271 if ((~ch & (~ch + 1)) & 0xff)
272 goto known_good_char;
273
274 do_gettimeofday(&curr);
275 if (curr.tv_sec - anomaly_start.tv_sec > 1)
276 goto known_good_char;
277
278 usecs = 0;
279 if (curr.tv_sec != anomaly_start.tv_sec)
280 usecs += USEC_PER_SEC;
281 usecs += curr.tv_usec - anomaly_start.tv_usec;
282
283 if (usecs > UART_GET_ANOMALY_THRESHOLD(uart))
284 goto known_good_char;
285
286 if (ch)
287 anomaly_start.tv_sec = 0;
288 else
289 anomaly_start = curr;
290
291 return;
292
293 known_good_char:
294 status &= ~BI;
295 anomaly_start.tv_sec = 0;
296 }
297 }
298
299 if (status & BI) {
300 if (ANOMALY_05000363)
301 if (bfin_revid() < 5)
302 do_gettimeofday(&anomaly_start);
303 uart->port.icount.brk++;
304 if (uart_handle_break(&uart->port))
305 goto ignore_char;
306 status &= ~(PE | FE);
307 }
308 if (status & PE)
309 uart->port.icount.parity++;
310 if (status & OE)
311 uart->port.icount.overrun++;
312 if (status & FE)
313 uart->port.icount.frame++;
314
315 status &= uart->port.read_status_mask;
316
317 if (status & BI)
318 flg = TTY_BREAK;
319 else if (status & PE)
320 flg = TTY_PARITY;
321 else if (status & FE)
322 flg = TTY_FRAME;
323 else
324 flg = TTY_NORMAL;
325
326 if (uart_handle_sysrq_char(&uart->port, ch))
327 goto ignore_char;
328
329 uart_insert_char(&uart->port, status, OE, ch, flg);
330
331 ignore_char:
332 tty_flip_buffer_push(tty);
333}
334
335static void bfin_serial_tx_chars(struct bfin_serial_port *uart)
336{
337 struct circ_buf *xmit = &uart->port.state->xmit;
338
339 if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) {
340#ifdef CONFIG_BF54x
341 /* Clear TFI bit */
342 UART_PUT_LSR(uart, TFI);
343#endif
344 /* Anomaly notes:
345 * 05000215 - we always clear ETBEI within last UART TX
346 * interrupt to end a string. It is always set
347 * when start a new tx.
348 */
349 UART_CLEAR_IER(uart, ETBEI);
350 return;
351 }
352
353 if (uart->port.x_char) {
354 UART_PUT_CHAR(uart, uart->port.x_char);
355 uart->port.icount.tx++;
356 uart->port.x_char = 0;
357 }
358
359 while ((UART_GET_LSR(uart) & THRE) && xmit->tail != xmit->head) {
360 UART_PUT_CHAR(uart, xmit->buf[xmit->tail]);
361 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
362 uart->port.icount.tx++;
363 }
364
365 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
366 uart_write_wakeup(&uart->port);
367}
368
369static irqreturn_t bfin_serial_rx_int(int irq, void *dev_id)
370{
371 struct bfin_serial_port *uart = dev_id;
372
373 spin_lock(&uart->port.lock);
374 while (UART_GET_LSR(uart) & DR)
375 bfin_serial_rx_chars(uart);
376 spin_unlock(&uart->port.lock);
377
378 return IRQ_HANDLED;
379}
380
381static irqreturn_t bfin_serial_tx_int(int irq, void *dev_id)
382{
383 struct bfin_serial_port *uart = dev_id;
384
385#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
386 if (uart->scts && !(bfin_serial_get_mctrl(&uart->port) & TIOCM_CTS)) {
387 uart->scts = 0;
388 uart_handle_cts_change(&uart->port, uart->scts);
389 }
390#endif
391 spin_lock(&uart->port.lock);
392 if (UART_GET_LSR(uart) & THRE)
393 bfin_serial_tx_chars(uart);
394 spin_unlock(&uart->port.lock);
395
396 return IRQ_HANDLED;
397}
398#endif
399
400#ifdef CONFIG_SERIAL_BFIN_DMA
401static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart)
402{
403 struct circ_buf *xmit = &uart->port.state->xmit;
404
405 uart->tx_done = 0;
406
407 if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) {
408 uart->tx_count = 0;
409 uart->tx_done = 1;
410 return;
411 }
412
413 if (uart->port.x_char) {
414 UART_PUT_CHAR(uart, uart->port.x_char);
415 uart->port.icount.tx++;
416 uart->port.x_char = 0;
417 }
418
419 uart->tx_count = CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE);
420 if (uart->tx_count > (UART_XMIT_SIZE - xmit->tail))
421 uart->tx_count = UART_XMIT_SIZE - xmit->tail;
422 blackfin_dcache_flush_range((unsigned long)(xmit->buf+xmit->tail),
423 (unsigned long)(xmit->buf+xmit->tail+uart->tx_count));
424 set_dma_config(uart->tx_dma_channel,
425 set_bfin_dma_config(DIR_READ, DMA_FLOW_STOP,
426 INTR_ON_BUF,
427 DIMENSION_LINEAR,
428 DATA_SIZE_8,
429 DMA_SYNC_RESTART));
430 set_dma_start_addr(uart->tx_dma_channel, (unsigned long)(xmit->buf+xmit->tail));
431 set_dma_x_count(uart->tx_dma_channel, uart->tx_count);
432 set_dma_x_modify(uart->tx_dma_channel, 1);
433 SSYNC();
434 enable_dma(uart->tx_dma_channel);
435
436 UART_SET_IER(uart, ETBEI);
437}
438
439static void bfin_serial_dma_rx_chars(struct bfin_serial_port *uart)
440{
441 struct tty_struct *tty = uart->port.state->port.tty;
442 int i, flg, status;
443
444 status = UART_GET_LSR(uart);
445 UART_CLEAR_LSR(uart);
446
447 uart->port.icount.rx +=
448 CIRC_CNT(uart->rx_dma_buf.head, uart->rx_dma_buf.tail,
449 UART_XMIT_SIZE);
450
451 if (status & BI) {
452 uart->port.icount.brk++;
453 if (uart_handle_break(&uart->port))
454 goto dma_ignore_char;
455 status &= ~(PE | FE);
456 }
457 if (status & PE)
458 uart->port.icount.parity++;
459 if (status & OE)
460 uart->port.icount.overrun++;
461 if (status & FE)
462 uart->port.icount.frame++;
463
464 status &= uart->port.read_status_mask;
465
466 if (status & BI)
467 flg = TTY_BREAK;
468 else if (status & PE)
469 flg = TTY_PARITY;
470 else if (status & FE)
471 flg = TTY_FRAME;
472 else
473 flg = TTY_NORMAL;
474
475 for (i = uart->rx_dma_buf.tail; ; i++) {
476 if (i >= UART_XMIT_SIZE)
477 i = 0;
478 if (i == uart->rx_dma_buf.head)
479 break;
480 if (!uart_handle_sysrq_char(&uart->port, uart->rx_dma_buf.buf[i]))
481 uart_insert_char(&uart->port, status, OE,
482 uart->rx_dma_buf.buf[i], flg);
483 }
484
485 dma_ignore_char:
486 tty_flip_buffer_push(tty);
487}
488
489void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart)
490{
491 int x_pos, pos;
492
493 dma_disable_irq(uart->tx_dma_channel);
494 dma_disable_irq(uart->rx_dma_channel);
495 spin_lock_bh(&uart->port.lock);
496
497 /* 2D DMA RX buffer ring is used. Because curr_y_count and
498 * curr_x_count can't be read as an atomic operation,
499 * curr_y_count should be read before curr_x_count. When
500 * curr_x_count is read, curr_y_count may already indicate
501 * next buffer line. But, the position calculated here is
502 * still indicate the old line. The wrong position data may
503 * be smaller than current buffer tail, which cause garbages
504 * are received if it is not prohibit.
505 */
506 uart->rx_dma_nrows = get_dma_curr_ycount(uart->rx_dma_channel);
507 x_pos = get_dma_curr_xcount(uart->rx_dma_channel);
508 uart->rx_dma_nrows = DMA_RX_YCOUNT - uart->rx_dma_nrows;
509 if (uart->rx_dma_nrows == DMA_RX_YCOUNT || x_pos == 0)
510 uart->rx_dma_nrows = 0;
511 x_pos = DMA_RX_XCOUNT - x_pos;
512 if (x_pos == DMA_RX_XCOUNT)
513 x_pos = 0;
514
515 pos = uart->rx_dma_nrows * DMA_RX_XCOUNT + x_pos;
516 /* Ignore receiving data if new position is in the same line of
517 * current buffer tail and small.
518 */
519 if (pos > uart->rx_dma_buf.tail ||
520 uart->rx_dma_nrows < (uart->rx_dma_buf.tail/DMA_RX_XCOUNT)) {
521 uart->rx_dma_buf.head = pos;
522 bfin_serial_dma_rx_chars(uart);
523 uart->rx_dma_buf.tail = uart->rx_dma_buf.head;
524 }
525
526 spin_unlock_bh(&uart->port.lock);
527 dma_enable_irq(uart->tx_dma_channel);
528 dma_enable_irq(uart->rx_dma_channel);
529
530 mod_timer(&(uart->rx_dma_timer), jiffies + DMA_RX_FLUSH_JIFFIES);
531}
532
533static irqreturn_t bfin_serial_dma_tx_int(int irq, void *dev_id)
534{
535 struct bfin_serial_port *uart = dev_id;
536 struct circ_buf *xmit = &uart->port.state->xmit;
537
538#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
539 if (uart->scts && !(bfin_serial_get_mctrl(&uart->port)&TIOCM_CTS)) {
540 uart->scts = 0;
541 uart_handle_cts_change(&uart->port, uart->scts);
542 }
543#endif
544
545 spin_lock(&uart->port.lock);
546 if (!(get_dma_curr_irqstat(uart->tx_dma_channel)&DMA_RUN)) {
547 disable_dma(uart->tx_dma_channel);
548 clear_dma_irqstat(uart->tx_dma_channel);
549 /* Anomaly notes:
550 * 05000215 - we always clear ETBEI within last UART TX
551 * interrupt to end a string. It is always set
552 * when start a new tx.
553 */
554 UART_CLEAR_IER(uart, ETBEI);
555 xmit->tail = (xmit->tail + uart->tx_count) & (UART_XMIT_SIZE - 1);
556 uart->port.icount.tx += uart->tx_count;
557
558 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
559 uart_write_wakeup(&uart->port);
560
561 bfin_serial_dma_tx_chars(uart);
562 }
563
564 spin_unlock(&uart->port.lock);
565 return IRQ_HANDLED;
566}
567
568static irqreturn_t bfin_serial_dma_rx_int(int irq, void *dev_id)
569{
570 struct bfin_serial_port *uart = dev_id;
571 unsigned short irqstat;
572 int x_pos, pos;
573
574 spin_lock(&uart->port.lock);
575 irqstat = get_dma_curr_irqstat(uart->rx_dma_channel);
576 clear_dma_irqstat(uart->rx_dma_channel);
577
578 uart->rx_dma_nrows = get_dma_curr_ycount(uart->rx_dma_channel);
579 x_pos = get_dma_curr_xcount(uart->rx_dma_channel);
580 uart->rx_dma_nrows = DMA_RX_YCOUNT - uart->rx_dma_nrows;
581 if (uart->rx_dma_nrows == DMA_RX_YCOUNT || x_pos == 0)
582 uart->rx_dma_nrows = 0;
583
584 pos = uart->rx_dma_nrows * DMA_RX_XCOUNT;
585 if (pos > uart->rx_dma_buf.tail ||
586 uart->rx_dma_nrows < (uart->rx_dma_buf.tail/DMA_RX_XCOUNT)) {
587 uart->rx_dma_buf.head = pos;
588 bfin_serial_dma_rx_chars(uart);
589 uart->rx_dma_buf.tail = uart->rx_dma_buf.head;
590 }
591
592 spin_unlock(&uart->port.lock);
593
594 return IRQ_HANDLED;
595}
596#endif
597
598/*
599 * Return TIOCSER_TEMT when transmitter is not busy.
600 */
601static unsigned int bfin_serial_tx_empty(struct uart_port *port)
602{
603 struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
604 unsigned short lsr;
605
606 lsr = UART_GET_LSR(uart);
607 if (lsr & TEMT)
608 return TIOCSER_TEMT;
609 else
610 return 0;
611}
612
613static void bfin_serial_break_ctl(struct uart_port *port, int break_state)
614{
615 struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
616 u16 lcr = UART_GET_LCR(uart);
617 if (break_state)
618 lcr |= SB;
619 else
620 lcr &= ~SB;
621 UART_PUT_LCR(uart, lcr);
622 SSYNC();
623}
624
625static int bfin_serial_startup(struct uart_port *port)
626{
627 struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
628
629#ifdef CONFIG_SERIAL_BFIN_DMA
630 dma_addr_t dma_handle;
631
632 if (request_dma(uart->rx_dma_channel, "BFIN_UART_RX") < 0) {
633 printk(KERN_NOTICE "Unable to attach Blackfin UART RX DMA channel\n");
634 return -EBUSY;
635 }
636
637 if (request_dma(uart->tx_dma_channel, "BFIN_UART_TX") < 0) {
638 printk(KERN_NOTICE "Unable to attach Blackfin UART TX DMA channel\n");
639 free_dma(uart->rx_dma_channel);
640 return -EBUSY;
641 }
642
643 set_dma_callback(uart->rx_dma_channel, bfin_serial_dma_rx_int, uart);
644 set_dma_callback(uart->tx_dma_channel, bfin_serial_dma_tx_int, uart);
645
646 uart->rx_dma_buf.buf = (unsigned char *)dma_alloc_coherent(NULL, PAGE_SIZE, &dma_handle, GFP_DMA);
647 uart->rx_dma_buf.head = 0;
648 uart->rx_dma_buf.tail = 0;
649 uart->rx_dma_nrows = 0;
650
651 set_dma_config(uart->rx_dma_channel,
652 set_bfin_dma_config(DIR_WRITE, DMA_FLOW_AUTO,
653 INTR_ON_ROW, DIMENSION_2D,
654 DATA_SIZE_8,
655 DMA_SYNC_RESTART));
656 set_dma_x_count(uart->rx_dma_channel, DMA_RX_XCOUNT);
657 set_dma_x_modify(uart->rx_dma_channel, 1);
658 set_dma_y_count(uart->rx_dma_channel, DMA_RX_YCOUNT);
659 set_dma_y_modify(uart->rx_dma_channel, 1);
660 set_dma_start_addr(uart->rx_dma_channel, (unsigned long)uart->rx_dma_buf.buf);
661 enable_dma(uart->rx_dma_channel);
662
663 uart->rx_dma_timer.data = (unsigned long)(uart);
664 uart->rx_dma_timer.function = (void *)bfin_serial_rx_dma_timeout;
665 uart->rx_dma_timer.expires = jiffies + DMA_RX_FLUSH_JIFFIES;
666 add_timer(&(uart->rx_dma_timer));
667#else
668# if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \
669 defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE)
670 if (kgdboc_port_line == uart->port.line && kgdboc_break_enabled)
671 kgdboc_break_enabled = 0;
672 else {
673# endif
674 if (request_irq(uart->port.irq, bfin_serial_rx_int, IRQF_DISABLED,
675 "BFIN_UART_RX", uart)) {
676 printk(KERN_NOTICE "Unable to attach BlackFin UART RX interrupt\n");
677 return -EBUSY;
678 }
679
680 if (request_irq
681 (uart->port.irq+1, bfin_serial_tx_int, IRQF_DISABLED,
682 "BFIN_UART_TX", uart)) {
683 printk(KERN_NOTICE "Unable to attach BlackFin UART TX interrupt\n");
684 free_irq(uart->port.irq, uart);
685 return -EBUSY;
686 }
687
688# ifdef CONFIG_BF54x
689 {
690 /*
691 * UART2 and UART3 on BF548 share interrupt PINs and DMA
692 * controllers with SPORT2 and SPORT3. UART rx and tx
693 * interrupts are generated in PIO mode only when configure
694 * their peripheral mapping registers properly, which means
695 * request corresponding DMA channels in PIO mode as well.
696 */
697 unsigned uart_dma_ch_rx, uart_dma_ch_tx;
698
699 switch (uart->port.irq) {
700 case IRQ_UART3_RX:
701 uart_dma_ch_rx = CH_UART3_RX;
702 uart_dma_ch_tx = CH_UART3_TX;
703 break;
704 case IRQ_UART2_RX:
705 uart_dma_ch_rx = CH_UART2_RX;
706 uart_dma_ch_tx = CH_UART2_TX;
707 break;
708 default:
709 uart_dma_ch_rx = uart_dma_ch_tx = 0;
710 break;
711 };
712
713 if (uart_dma_ch_rx &&
714 request_dma(uart_dma_ch_rx, "BFIN_UART_RX") < 0) {
715 printk(KERN_NOTICE"Fail to attach UART interrupt\n");
716 free_irq(uart->port.irq, uart);
717 free_irq(uart->port.irq + 1, uart);
718 return -EBUSY;
719 }
720 if (uart_dma_ch_tx &&
721 request_dma(uart_dma_ch_tx, "BFIN_UART_TX") < 0) {
722 printk(KERN_NOTICE "Fail to attach UART interrupt\n");
723 free_dma(uart_dma_ch_rx);
724 free_irq(uart->port.irq, uart);
725 free_irq(uart->port.irq + 1, uart);
726 return -EBUSY;
727 }
728 }
729# endif
730# if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \
731 defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE)
732 }
733# endif
734#endif
735
736#ifdef CONFIG_SERIAL_BFIN_CTSRTS
737 if (uart->cts_pin >= 0) {
738 if (request_irq(gpio_to_irq(uart->cts_pin),
739 bfin_serial_mctrl_cts_int,
740 IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
741 IRQF_DISABLED, "BFIN_UART_CTS", uart)) {
742 uart->cts_pin = -1;
743 pr_info("Unable to attach BlackFin UART CTS interrupt. So, disable it.\n");
744 }
745 }
746 if (uart->rts_pin >= 0) {
747 gpio_direction_output(uart->rts_pin, 0);
748 }
749#endif
750#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
751 if (uart->cts_pin >= 0 && request_irq(uart->status_irq,
752 bfin_serial_mctrl_cts_int,
753 IRQF_DISABLED, "BFIN_UART_MODEM_STATUS", uart)) {
754 uart->cts_pin = -1;
755 pr_info("Unable to attach BlackFin UART Modem Status interrupt.\n");
756 }
757
758 /* CTS RTS PINs are negative assertive. */
759 UART_PUT_MCR(uart, ACTS);
760 UART_SET_IER(uart, EDSSI);
761#endif
762
763 UART_SET_IER(uart, ERBFI);
764 return 0;
765}
766
767static void bfin_serial_shutdown(struct uart_port *port)
768{
769 struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
770
771#ifdef CONFIG_SERIAL_BFIN_DMA
772 disable_dma(uart->tx_dma_channel);
773 free_dma(uart->tx_dma_channel);
774 disable_dma(uart->rx_dma_channel);
775 free_dma(uart->rx_dma_channel);
776 del_timer(&(uart->rx_dma_timer));
777 dma_free_coherent(NULL, PAGE_SIZE, uart->rx_dma_buf.buf, 0);
778#else
779#ifdef CONFIG_BF54x
780 switch (uart->port.irq) {
781 case IRQ_UART3_RX:
782 free_dma(CH_UART3_RX);
783 free_dma(CH_UART3_TX);
784 break;
785 case IRQ_UART2_RX:
786 free_dma(CH_UART2_RX);
787 free_dma(CH_UART2_TX);
788 break;
789 default:
790 break;
791 };
792#endif
793 free_irq(uart->port.irq, uart);
794 free_irq(uart->port.irq+1, uart);
795#endif
796
797#ifdef CONFIG_SERIAL_BFIN_CTSRTS
798 if (uart->cts_pin >= 0)
799 free_irq(gpio_to_irq(uart->cts_pin), uart);
800#endif
801#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
802 if (uart->cts_pin >= 0)
803 free_irq(uart->status_irq, uart);
804#endif
805}
806
807static void
808bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios,
809 struct ktermios *old)
810{
811 struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
812 unsigned long flags;
813 unsigned int baud, quot;
814 unsigned short val, ier, lcr = 0;
815
816 switch (termios->c_cflag & CSIZE) {
817 case CS8:
818 lcr = WLS(8);
819 break;
820 case CS7:
821 lcr = WLS(7);
822 break;
823 case CS6:
824 lcr = WLS(6);
825 break;
826 case CS5:
827 lcr = WLS(5);
828 break;
829 default:
830 printk(KERN_ERR "%s: word lengh not supported\n",
831 __func__);
832 }
833
834 /* Anomaly notes:
835 * 05000231 - STOP bit is always set to 1 whatever the user is set.
836 */
837 if (termios->c_cflag & CSTOPB) {
838 if (ANOMALY_05000231)
839 printk(KERN_WARNING "STOP bits other than 1 is not "
840 "supported in case of anomaly 05000231.\n");
841 else
842 lcr |= STB;
843 }
844 if (termios->c_cflag & PARENB)
845 lcr |= PEN;
846 if (!(termios->c_cflag & PARODD))
847 lcr |= EPS;
848 if (termios->c_cflag & CMSPAR)
849 lcr |= STP;
850
851 spin_lock_irqsave(&uart->port.lock, flags);
852
853 port->read_status_mask = OE;
854 if (termios->c_iflag & INPCK)
855 port->read_status_mask |= (FE | PE);
856 if (termios->c_iflag & (BRKINT | PARMRK))
857 port->read_status_mask |= BI;
858
859 /*
860 * Characters to ignore
861 */
862 port->ignore_status_mask = 0;
863 if (termios->c_iflag & IGNPAR)
864 port->ignore_status_mask |= FE | PE;
865 if (termios->c_iflag & IGNBRK) {
866 port->ignore_status_mask |= BI;
867 /*
868 * If we're ignoring parity and break indicators,
869 * ignore overruns too (for real raw support).
870 */
871 if (termios->c_iflag & IGNPAR)
872 port->ignore_status_mask |= OE;
873 }
874
875 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
876 quot = uart_get_divisor(port, baud);
877
878 /* If discipline is not IRDA, apply ANOMALY_05000230 */
879 if (termios->c_line != N_IRDA)
880 quot -= ANOMALY_05000230;
881
882 UART_SET_ANOMALY_THRESHOLD(uart, USEC_PER_SEC / baud * 15);
883
884 /* Disable UART */
885 ier = UART_GET_IER(uart);
886 UART_DISABLE_INTS(uart);
887
888 /* Set DLAB in LCR to Access DLL and DLH */
889 UART_SET_DLAB(uart);
890
891 UART_PUT_DLL(uart, quot & 0xFF);
892 UART_PUT_DLH(uart, (quot >> 8) & 0xFF);
893 SSYNC();
894
895 /* Clear DLAB in LCR to Access THR RBR IER */
896 UART_CLEAR_DLAB(uart);
897
898 UART_PUT_LCR(uart, lcr);
899
900 /* Enable UART */
901 UART_ENABLE_INTS(uart, ier);
902
903 val = UART_GET_GCTL(uart);
904 val |= UCEN;
905 UART_PUT_GCTL(uart, val);
906
907 /* Port speed changed, update the per-port timeout. */
908 uart_update_timeout(port, termios->c_cflag, baud);
909
910 spin_unlock_irqrestore(&uart->port.lock, flags);
911}
912
913static const char *bfin_serial_type(struct uart_port *port)
914{
915 struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
916
917 return uart->port.type == PORT_BFIN ? "BFIN-UART" : NULL;
918}
919
920/*
921 * Release the memory region(s) being used by 'port'.
922 */
923static void bfin_serial_release_port(struct uart_port *port)
924{
925}
926
927/*
928 * Request the memory region(s) being used by 'port'.
929 */
930static int bfin_serial_request_port(struct uart_port *port)
931{
932 return 0;
933}
934
935/*
936 * Configure/autoconfigure the port.
937 */
938static void bfin_serial_config_port(struct uart_port *port, int flags)
939{
940 struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
941
942 if (flags & UART_CONFIG_TYPE &&
943 bfin_serial_request_port(&uart->port) == 0)
944 uart->port.type = PORT_BFIN;
945}
946
947/*
948 * Verify the new serial_struct (for TIOCSSERIAL).
949 * The only change we allow are to the flags and type, and
950 * even then only between PORT_BFIN and PORT_UNKNOWN
951 */
952static int
953bfin_serial_verify_port(struct uart_port *port, struct serial_struct *ser)
954{
955 return 0;
956}
957
958/*
959 * Enable the IrDA function if tty->ldisc.num is N_IRDA.
960 * In other cases, disable IrDA function.
961 */
962static void bfin_serial_set_ldisc(struct uart_port *port, int ld)
963{
964 struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
965 unsigned short val;
966
967 switch (ld) {
968 case N_IRDA:
969 val = UART_GET_GCTL(uart);
970 val |= (IREN | RPOLC);
971 UART_PUT_GCTL(uart, val);
972 break;
973 default:
974 val = UART_GET_GCTL(uart);
975 val &= ~(IREN | RPOLC);
976 UART_PUT_GCTL(uart, val);
977 }
978}
979
980static void bfin_serial_reset_irda(struct uart_port *port)
981{
982 struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
983 unsigned short val;
984
985 val = UART_GET_GCTL(uart);
986 val &= ~(IREN | RPOLC);
987 UART_PUT_GCTL(uart, val);
988 SSYNC();
989 val |= (IREN | RPOLC);
990 UART_PUT_GCTL(uart, val);
991 SSYNC();
992}
993
994#ifdef CONFIG_CONSOLE_POLL
995/* Anomaly notes:
996 * 05000099 - Because we only use THRE in poll_put and DR in poll_get,
997 * losing other bits of UART_LSR is not a problem here.
998 */
999static void bfin_serial_poll_put_char(struct uart_port *port, unsigned char chr)
1000{
1001 struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
1002
1003 while (!(UART_GET_LSR(uart) & THRE))
1004 cpu_relax();
1005
1006 UART_CLEAR_DLAB(uart);
1007 UART_PUT_CHAR(uart, (unsigned char)chr);
1008}
1009
1010static int bfin_serial_poll_get_char(struct uart_port *port)
1011{
1012 struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
1013 unsigned char chr;
1014
1015 while (!(UART_GET_LSR(uart) & DR))
1016 cpu_relax();
1017
1018 UART_CLEAR_DLAB(uart);
1019 chr = UART_GET_CHAR(uart);
1020
1021 return chr;
1022}
1023#endif
1024
1025#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \
1026 defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE)
1027static void bfin_kgdboc_port_shutdown(struct uart_port *port)
1028{
1029 if (kgdboc_break_enabled) {
1030 kgdboc_break_enabled = 0;
1031 bfin_serial_shutdown(port);
1032 }
1033}
1034
1035static int bfin_kgdboc_port_startup(struct uart_port *port)
1036{
1037 kgdboc_port_line = port->line;
1038 kgdboc_break_enabled = !bfin_serial_startup(port);
1039 return 0;
1040}
1041#endif
1042
1043static struct uart_ops bfin_serial_pops = {
1044 .tx_empty = bfin_serial_tx_empty,
1045 .set_mctrl = bfin_serial_set_mctrl,
1046 .get_mctrl = bfin_serial_get_mctrl,
1047 .stop_tx = bfin_serial_stop_tx,
1048 .start_tx = bfin_serial_start_tx,
1049 .stop_rx = bfin_serial_stop_rx,
1050 .enable_ms = bfin_serial_enable_ms,
1051 .break_ctl = bfin_serial_break_ctl,
1052 .startup = bfin_serial_startup,
1053 .shutdown = bfin_serial_shutdown,
1054 .set_termios = bfin_serial_set_termios,
1055 .set_ldisc = bfin_serial_set_ldisc,
1056 .type = bfin_serial_type,
1057 .release_port = bfin_serial_release_port,
1058 .request_port = bfin_serial_request_port,
1059 .config_port = bfin_serial_config_port,
1060 .verify_port = bfin_serial_verify_port,
1061#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \
1062 defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE)
1063 .kgdboc_port_startup = bfin_kgdboc_port_startup,
1064 .kgdboc_port_shutdown = bfin_kgdboc_port_shutdown,
1065#endif
1066#ifdef CONFIG_CONSOLE_POLL
1067 .poll_put_char = bfin_serial_poll_put_char,
1068 .poll_get_char = bfin_serial_poll_get_char,
1069#endif
1070};
1071
1072#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
1073/*
1074 * If the port was already initialised (eg, by a boot loader),
1075 * try to determine the current setup.
1076 */
1077static void __init
1078bfin_serial_console_get_options(struct bfin_serial_port *uart, int *baud,
1079 int *parity, int *bits)
1080{
1081 unsigned short status;
1082
1083 status = UART_GET_IER(uart) & (ERBFI | ETBEI);
1084 if (status == (ERBFI | ETBEI)) {
1085 /* ok, the port was enabled */
1086 u16 lcr, dlh, dll;
1087
1088 lcr = UART_GET_LCR(uart);
1089
1090 *parity = 'n';
1091 if (lcr & PEN) {
1092 if (lcr & EPS)
1093 *parity = 'e';
1094 else
1095 *parity = 'o';
1096 }
1097 switch (lcr & 0x03) {
1098 case 0: *bits = 5; break;
1099 case 1: *bits = 6; break;
1100 case 2: *bits = 7; break;
1101 case 3: *bits = 8; break;
1102 }
1103 /* Set DLAB in LCR to Access DLL and DLH */
1104 UART_SET_DLAB(uart);
1105
1106 dll = UART_GET_DLL(uart);
1107 dlh = UART_GET_DLH(uart);
1108
1109 /* Clear DLAB in LCR to Access THR RBR IER */
1110 UART_CLEAR_DLAB(uart);
1111
1112 *baud = get_sclk() / (16*(dll | dlh << 8));
1113 }
1114 pr_debug("%s:baud = %d, parity = %c, bits= %d\n", __func__, *baud, *parity, *bits);
1115}
1116
1117static struct uart_driver bfin_serial_reg;
1118
1119static void bfin_serial_console_putchar(struct uart_port *port, int ch)
1120{
1121 struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
1122 while (!(UART_GET_LSR(uart) & THRE))
1123 barrier();
1124 UART_PUT_CHAR(uart, ch);
1125}
1126
1127#endif /* defined (CONFIG_SERIAL_BFIN_CONSOLE) ||
1128 defined (CONFIG_EARLY_PRINTK) */
1129
1130#ifdef CONFIG_SERIAL_BFIN_CONSOLE
1131#define CLASS_BFIN_CONSOLE "bfin-console"
1132/*
1133 * Interrupts are disabled on entering
1134 */
1135static void
1136bfin_serial_console_write(struct console *co, const char *s, unsigned int count)
1137{
1138 struct bfin_serial_port *uart = bfin_serial_ports[co->index];
1139 unsigned long flags;
1140
1141 spin_lock_irqsave(&uart->port.lock, flags);
1142 uart_console_write(&uart->port, s, count, bfin_serial_console_putchar);
1143 spin_unlock_irqrestore(&uart->port.lock, flags);
1144
1145}
1146
1147static int __init
1148bfin_serial_console_setup(struct console *co, char *options)
1149{
1150 struct bfin_serial_port *uart;
1151 int baud = 57600;
1152 int bits = 8;
1153 int parity = 'n';
1154# if defined(CONFIG_SERIAL_BFIN_CTSRTS) || \
1155 defined(CONFIG_SERIAL_BFIN_HARD_CTSRTS)
1156 int flow = 'r';
1157# else
1158 int flow = 'n';
1159# endif
1160
1161 /*
1162 * Check whether an invalid uart number has been specified, and
1163 * if so, search for the first available port that does have
1164 * console support.
1165 */
1166 if (co->index < 0 || co->index >= BFIN_UART_NR_PORTS)
1167 return -ENODEV;
1168
1169 uart = bfin_serial_ports[co->index];
1170 if (!uart)
1171 return -ENODEV;
1172
1173 if (options)
1174 uart_parse_options(options, &baud, &parity, &bits, &flow);
1175 else
1176 bfin_serial_console_get_options(uart, &baud, &parity, &bits);
1177
1178 return uart_set_options(&uart->port, co, baud, parity, bits, flow);
1179}
1180
1181static struct console bfin_serial_console = {
1182 .name = BFIN_SERIAL_DEV_NAME,
1183 .write = bfin_serial_console_write,
1184 .device = uart_console_device,
1185 .setup = bfin_serial_console_setup,
1186 .flags = CON_PRINTBUFFER,
1187 .index = -1,
1188 .data = &bfin_serial_reg,
1189};
1190#define BFIN_SERIAL_CONSOLE &bfin_serial_console
1191#else
1192#define BFIN_SERIAL_CONSOLE NULL
1193#endif /* CONFIG_SERIAL_BFIN_CONSOLE */
1194
1195#ifdef CONFIG_EARLY_PRINTK
1196static struct bfin_serial_port bfin_earlyprintk_port;
1197#define CLASS_BFIN_EARLYPRINTK "bfin-earlyprintk"
1198
1199/*
1200 * Interrupts are disabled on entering
1201 */
1202static void
1203bfin_earlyprintk_console_write(struct console *co, const char *s, unsigned int count)
1204{
1205 unsigned long flags;
1206
1207 if (bfin_earlyprintk_port.port.line != co->index)
1208 return;
1209
1210 spin_lock_irqsave(&bfin_earlyprintk_port.port.lock, flags);
1211 uart_console_write(&bfin_earlyprintk_port.port, s, count,
1212 bfin_serial_console_putchar);
1213 spin_unlock_irqrestore(&bfin_earlyprintk_port.port.lock, flags);
1214}
1215
1216/*
1217 * This should have a .setup or .early_setup in it, but then things get called
1218 * without the command line options, and the baud rate gets messed up - so
1219 * don't let the common infrastructure play with things. (see calls to setup
1220 * & earlysetup in ./kernel/printk.c:register_console()
1221 */
1222static struct __initdata console bfin_early_serial_console = {
1223 .name = "early_BFuart",
1224 .write = bfin_earlyprintk_console_write,
1225 .device = uart_console_device,
1226 .flags = CON_PRINTBUFFER,
1227 .index = -1,
1228 .data = &bfin_serial_reg,
1229};
1230#endif
1231
1232static struct uart_driver bfin_serial_reg = {
1233 .owner = THIS_MODULE,
1234 .driver_name = DRIVER_NAME,
1235 .dev_name = BFIN_SERIAL_DEV_NAME,
1236 .major = BFIN_SERIAL_MAJOR,
1237 .minor = BFIN_SERIAL_MINOR,
1238 .nr = BFIN_UART_NR_PORTS,
1239 .cons = BFIN_SERIAL_CONSOLE,
1240};
1241
1242static int bfin_serial_suspend(struct platform_device *pdev, pm_message_t state)
1243{
1244 struct bfin_serial_port *uart = platform_get_drvdata(pdev);
1245
1246 return uart_suspend_port(&bfin_serial_reg, &uart->port);
1247}
1248
1249static int bfin_serial_resume(struct platform_device *pdev)
1250{
1251 struct bfin_serial_port *uart = platform_get_drvdata(pdev);
1252
1253 return uart_resume_port(&bfin_serial_reg, &uart->port);
1254}
1255
1256static int bfin_serial_probe(struct platform_device *pdev)
1257{
1258 struct resource *res;
1259 struct bfin_serial_port *uart = NULL;
1260 int ret = 0;
1261
1262 if (pdev->id < 0 || pdev->id >= BFIN_UART_NR_PORTS) {
1263 dev_err(&pdev->dev, "Wrong bfin uart platform device id.\n");
1264 return -ENOENT;
1265 }
1266
1267 if (bfin_serial_ports[pdev->id] == NULL) {
1268
1269 uart = kzalloc(sizeof(*uart), GFP_KERNEL);
1270 if (!uart) {
1271 dev_err(&pdev->dev,
1272 "fail to malloc bfin_serial_port\n");
1273 return -ENOMEM;
1274 }
1275 bfin_serial_ports[pdev->id] = uart;
1276
1277#ifdef CONFIG_EARLY_PRINTK
1278 if (!(bfin_earlyprintk_port.port.membase
1279 && bfin_earlyprintk_port.port.line == pdev->id)) {
1280 /*
1281 * If the peripheral PINs of current port is allocated
1282 * in earlyprintk probe stage, don't do it again.
1283 */
1284#endif
1285 ret = peripheral_request_list(
1286 (unsigned short *)pdev->dev.platform_data, DRIVER_NAME);
1287 if (ret) {
1288 dev_err(&pdev->dev,
1289 "fail to request bfin serial peripherals\n");
1290 goto out_error_free_mem;
1291 }
1292#ifdef CONFIG_EARLY_PRINTK
1293 }
1294#endif
1295
1296 spin_lock_init(&uart->port.lock);
1297 uart->port.uartclk = get_sclk();
1298 uart->port.fifosize = BFIN_UART_TX_FIFO_SIZE;
1299 uart->port.ops = &bfin_serial_pops;
1300 uart->port.line = pdev->id;
1301 uart->port.iotype = UPIO_MEM;
1302 uart->port.flags = UPF_BOOT_AUTOCONF;
1303
1304 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1305 if (res == NULL) {
1306 dev_err(&pdev->dev, "Cannot get IORESOURCE_MEM\n");
1307 ret = -ENOENT;
1308 goto out_error_free_peripherals;
1309 }
1310
1311 uart->port.membase = ioremap(res->start,
1312 res->end - res->start);
1313 if (!uart->port.membase) {
1314 dev_err(&pdev->dev, "Cannot map uart IO\n");
1315 ret = -ENXIO;
1316 goto out_error_free_peripherals;
1317 }
1318 uart->port.mapbase = res->start;
1319
1320 uart->port.irq = platform_get_irq(pdev, 0);
1321 if (uart->port.irq < 0) {
1322 dev_err(&pdev->dev, "No uart RX/TX IRQ specified\n");
1323 ret = -ENOENT;
1324 goto out_error_unmap;
1325 }
1326
1327 uart->status_irq = platform_get_irq(pdev, 1);
1328 if (uart->status_irq < 0) {
1329 dev_err(&pdev->dev, "No uart status IRQ specified\n");
1330 ret = -ENOENT;
1331 goto out_error_unmap;
1332 }
1333
1334#ifdef CONFIG_SERIAL_BFIN_DMA
1335 uart->tx_done = 1;
1336 uart->tx_count = 0;
1337
1338 res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
1339 if (res == NULL) {
1340 dev_err(&pdev->dev, "No uart TX DMA channel specified\n");
1341 ret = -ENOENT;
1342 goto out_error_unmap;
1343 }
1344 uart->tx_dma_channel = res->start;
1345
1346 res = platform_get_resource(pdev, IORESOURCE_DMA, 1);
1347 if (res == NULL) {
1348 dev_err(&pdev->dev, "No uart RX DMA channel specified\n");
1349 ret = -ENOENT;
1350 goto out_error_unmap;
1351 }
1352 uart->rx_dma_channel = res->start;
1353
1354 init_timer(&(uart->rx_dma_timer));
1355#endif
1356
1357#if defined(CONFIG_SERIAL_BFIN_CTSRTS) || \
1358 defined(CONFIG_SERIAL_BFIN_HARD_CTSRTS)
1359 res = platform_get_resource(pdev, IORESOURCE_IO, 0);
1360 if (res == NULL)
1361 uart->cts_pin = -1;
1362 else
1363 uart->cts_pin = res->start;
1364
1365 res = platform_get_resource(pdev, IORESOURCE_IO, 1);
1366 if (res == NULL)
1367 uart->rts_pin = -1;
1368 else
1369 uart->rts_pin = res->start;
1370# if defined(CONFIG_SERIAL_BFIN_CTSRTS)
1371 if (uart->rts_pin >= 0)
1372 gpio_request(uart->rts_pin, DRIVER_NAME);
1373# endif
1374#endif
1375 }
1376
1377#ifdef CONFIG_SERIAL_BFIN_CONSOLE
1378 if (!is_early_platform_device(pdev)) {
1379#endif
1380 uart = bfin_serial_ports[pdev->id];
1381 uart->port.dev = &pdev->dev;
1382 dev_set_drvdata(&pdev->dev, uart);
1383 ret = uart_add_one_port(&bfin_serial_reg, &uart->port);
1384#ifdef CONFIG_SERIAL_BFIN_CONSOLE
1385 }
1386#endif
1387
1388 if (!ret)
1389 return 0;
1390
1391 if (uart) {
1392out_error_unmap:
1393 iounmap(uart->port.membase);
1394out_error_free_peripherals:
1395 peripheral_free_list(
1396 (unsigned short *)pdev->dev.platform_data);
1397out_error_free_mem:
1398 kfree(uart);
1399 bfin_serial_ports[pdev->id] = NULL;
1400 }
1401
1402 return ret;
1403}
1404
1405static int __devexit bfin_serial_remove(struct platform_device *pdev)
1406{
1407 struct bfin_serial_port *uart = platform_get_drvdata(pdev);
1408
1409 dev_set_drvdata(&pdev->dev, NULL);
1410
1411 if (uart) {
1412 uart_remove_one_port(&bfin_serial_reg, &uart->port);
1413#ifdef CONFIG_SERIAL_BFIN_CTSRTS
1414 if (uart->rts_pin >= 0)
1415 gpio_free(uart->rts_pin);
1416#endif
1417 iounmap(uart->port.membase);
1418 peripheral_free_list(
1419 (unsigned short *)pdev->dev.platform_data);
1420 kfree(uart);
1421 bfin_serial_ports[pdev->id] = NULL;
1422 }
1423
1424 return 0;
1425}
1426
1427static struct platform_driver bfin_serial_driver = {
1428 .probe = bfin_serial_probe,
1429 .remove = __devexit_p(bfin_serial_remove),
1430 .suspend = bfin_serial_suspend,
1431 .resume = bfin_serial_resume,
1432 .driver = {
1433 .name = DRIVER_NAME,
1434 .owner = THIS_MODULE,
1435 },
1436};
1437
1438#if defined(CONFIG_SERIAL_BFIN_CONSOLE)
1439static __initdata struct early_platform_driver early_bfin_serial_driver = {
1440 .class_str = CLASS_BFIN_CONSOLE,
1441 .pdrv = &bfin_serial_driver,
1442 .requested_id = EARLY_PLATFORM_ID_UNSET,
1443};
1444
1445static int __init bfin_serial_rs_console_init(void)
1446{
1447 early_platform_driver_register(&early_bfin_serial_driver, DRIVER_NAME);
1448
1449 early_platform_driver_probe(CLASS_BFIN_CONSOLE, BFIN_UART_NR_PORTS, 0);
1450
1451 register_console(&bfin_serial_console);
1452
1453 return 0;
1454}
1455console_initcall(bfin_serial_rs_console_init);
1456#endif
1457
1458#ifdef CONFIG_EARLY_PRINTK
1459/*
1460 * Memory can't be allocated dynamically during earlyprink init stage.
1461 * So, do individual probe for earlyprink with a static uart port variable.
1462 */
1463static int bfin_earlyprintk_probe(struct platform_device *pdev)
1464{
1465 struct resource *res;
1466 int ret;
1467
1468 if (pdev->id < 0 || pdev->id >= BFIN_UART_NR_PORTS) {
1469 dev_err(&pdev->dev, "Wrong earlyprintk platform device id.\n");
1470 return -ENOENT;
1471 }
1472
1473 ret = peripheral_request_list(
1474 (unsigned short *)pdev->dev.platform_data, DRIVER_NAME);
1475 if (ret) {
1476 dev_err(&pdev->dev,
1477 "fail to request bfin serial peripherals\n");
1478 return ret;
1479 }
1480
1481 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1482 if (res == NULL) {
1483 dev_err(&pdev->dev, "Cannot get IORESOURCE_MEM\n");
1484 ret = -ENOENT;
1485 goto out_error_free_peripherals;
1486 }
1487
1488 bfin_earlyprintk_port.port.membase = ioremap(res->start,
1489 res->end - res->start);
1490 if (!bfin_earlyprintk_port.port.membase) {
1491 dev_err(&pdev->dev, "Cannot map uart IO\n");
1492 ret = -ENXIO;
1493 goto out_error_free_peripherals;
1494 }
1495 bfin_earlyprintk_port.port.mapbase = res->start;
1496 bfin_earlyprintk_port.port.line = pdev->id;
1497 bfin_earlyprintk_port.port.uartclk = get_sclk();
1498 bfin_earlyprintk_port.port.fifosize = BFIN_UART_TX_FIFO_SIZE;
1499 spin_lock_init(&bfin_earlyprintk_port.port.lock);
1500
1501 return 0;
1502
1503out_error_free_peripherals:
1504 peripheral_free_list(
1505 (unsigned short *)pdev->dev.platform_data);
1506
1507 return ret;
1508}
1509
1510static struct platform_driver bfin_earlyprintk_driver = {
1511 .probe = bfin_earlyprintk_probe,
1512 .driver = {
1513 .name = DRIVER_NAME,
1514 .owner = THIS_MODULE,
1515 },
1516};
1517
1518static __initdata struct early_platform_driver early_bfin_earlyprintk_driver = {
1519 .class_str = CLASS_BFIN_EARLYPRINTK,
1520 .pdrv = &bfin_earlyprintk_driver,
1521 .requested_id = EARLY_PLATFORM_ID_UNSET,
1522};
1523
1524struct console __init *bfin_earlyserial_init(unsigned int port,
1525 unsigned int cflag)
1526{
1527 struct ktermios t;
1528 char port_name[20];
1529
1530 if (port < 0 || port >= BFIN_UART_NR_PORTS)
1531 return NULL;
1532
1533 /*
1534 * Only probe resource of the given port in earlyprintk boot arg.
1535 * The expected port id should be indicated in port name string.
1536 */
1537 snprintf(port_name, 20, DRIVER_NAME ".%d", port);
1538 early_platform_driver_register(&early_bfin_earlyprintk_driver,
1539 port_name);
1540 early_platform_driver_probe(CLASS_BFIN_EARLYPRINTK, 1, 0);
1541
1542 if (!bfin_earlyprintk_port.port.membase)
1543 return NULL;
1544
1545#ifdef CONFIG_SERIAL_BFIN_CONSOLE
1546 /*
1547 * If we are using early serial, don't let the normal console rewind
1548 * log buffer, since that causes things to be printed multiple times
1549 */
1550 bfin_serial_console.flags &= ~CON_PRINTBUFFER;
1551#endif
1552
1553 bfin_early_serial_console.index = port;
1554 t.c_cflag = cflag;
1555 t.c_iflag = 0;
1556 t.c_oflag = 0;
1557 t.c_lflag = ICANON;
1558 t.c_line = port;
1559 bfin_serial_set_termios(&bfin_earlyprintk_port.port, &t, &t);
1560
1561 return &bfin_early_serial_console;
1562}
1563#endif /* CONFIG_EARLY_PRINTK */
1564
1565static int __init bfin_serial_init(void)
1566{
1567 int ret;
1568
1569 pr_info("Blackfin serial driver\n");
1570
1571 ret = uart_register_driver(&bfin_serial_reg);
1572 if (ret) {
1573 pr_err("failed to register %s:%d\n",
1574 bfin_serial_reg.driver_name, ret);
1575 }
1576
1577 ret = platform_driver_register(&bfin_serial_driver);
1578 if (ret) {
1579 pr_err("fail to register bfin uart\n");
1580 uart_unregister_driver(&bfin_serial_reg);
1581 }
1582
1583 return ret;
1584}
1585
1586static void __exit bfin_serial_exit(void)
1587{
1588 platform_driver_unregister(&bfin_serial_driver);
1589 uart_unregister_driver(&bfin_serial_reg);
1590}
1591
1592
1593module_init(bfin_serial_init);
1594module_exit(bfin_serial_exit);
1595
1596MODULE_AUTHOR("Sonic Zhang, Aubrey Li");
1597MODULE_DESCRIPTION("Blackfin generic serial port driver");
1598MODULE_LICENSE("GPL");
1599MODULE_ALIAS_CHARDEV_MAJOR(BFIN_SERIAL_MAJOR);
1600MODULE_ALIAS("platform:bfin-uart");
generated by cgit v1.2.2 (git 2.25.0) at 2025-01-18 15:37:52 -0500