[PATCH] at91_serial -> atmel_serial: at91rm9200_usart.h

Move include/asm/arch/at91rm9200_usart.h into drivers/serial and rename
it atmel_usart.h. Also delete AVR32's version of this file.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Acked-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

1 files changed, 123 insertions, 0 deletions

diff --git a/drivers/serial/atmel_serial.h b/drivers/serial/atmel_serial.h
new file mode 100644
index 000000000000..d38b24a53375
--- /dev/null
+++ b/drivers/serial/atmel_serial.h
@@ -0,0 +1,123 @@
+/*
+ * drivers/serial/atmel_serial.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * USART registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91RM9200_USART_H
+#define AT91RM9200_USART_H
+
+#define AT91_US_CR              0x00                    /* Control Register */
+#define         AT91_US_RSTRX           (1 <<  2)               /* Reset Receiver */
+#define         AT91_US_RSTTX           (1 <<  3)               /* Reset Transmitter */
+#define         AT91_US_RXEN            (1 <<  4)               /* Receiver Enable */
+#define         AT91_US_RXDIS           (1 <<  5)               /* Receiver Disable */
+#define         AT91_US_TXEN            (1 <<  6)               /* Transmitter Enable */
+#define         AT91_US_TXDIS           (1 <<  7)               /* Transmitter Disable */
+#define         AT91_US_RSTSTA          (1 <<  8)               /* Reset Status Bits */
+#define         AT91_US_STTBRK          (1 <<  9)               /* Start Break */
+#define         AT91_US_STPBRK          (1 << 10)               /* Stop Break */
+#define         AT91_US_STTTO           (1 << 11)               /* Start Time-out */
+#define         AT91_US_SENDA           (1 << 12)               /* Send Address */
+#define         AT91_US_RSTIT           (1 << 13)               /* Reset Iterations */
+#define         AT91_US_RSTNACK         (1 << 14)               /* Reset Non Acknowledge */
+#define         AT91_US_RETTO           (1 << 15)               /* Rearm Time-out */
+#define         AT91_US_DTREN           (1 << 16)               /* Data Terminal Ready Enable */
+#define         AT91_US_DTRDIS          (1 << 17)               /* Data Terminal Ready Disable */
+#define         AT91_US_RTSEN           (1 << 18)               /* Request To Send Enable */
+#define         AT91_US_RTSDIS          (1 << 19)               /* Request To Send Disable */
+
+#define AT91_US_MR              0x04                    /* Mode Register */
+#define         AT91_US_USMODE          (0xf <<  0)             /* Mode of the USART */
+#define                 AT91_US_USMODE_NORMAL           0
+#define                 AT91_US_USMODE_RS485            1
+#define                 AT91_US_USMODE_HWHS             2
+#define                 AT91_US_USMODE_MODEM            3
+#define                 AT91_US_USMODE_ISO7816_T0       4
+#define                 AT91_US_USMODE_ISO7816_T1       6
+#define                 AT91_US_USMODE_IRDA             8
+#define         AT91_US_USCLKS          (3   <<  4)             /* Clock Selection */
+#define         AT91_US_CHRL            (3   <<  6)             /* Character Length */
+#define                 AT91_US_CHRL_5                  (0 <<  6)
+#define                 AT91_US_CHRL_6                  (1 <<  6)
+#define                 AT91_US_CHRL_7                  (2 <<  6)
+#define                 AT91_US_CHRL_8                  (3 <<  6)
+#define         AT91_US_SYNC            (1 <<  8)               /* Synchronous Mode Select */
+#define         AT91_US_PAR             (7 <<  9)               /* Parity Type */
+#define                 AT91_US_PAR_EVEN                (0 <<  9)
+#define                 AT91_US_PAR_ODD                 (1 <<  9)
+#define                 AT91_US_PAR_SPACE               (2 <<  9)
+#define                 AT91_US_PAR_MARK                (3 <<  9)
+#define                 AT91_US_PAR_NONE                (4 <<  9)
+#define                 AT91_US_PAR_MULTI_DROP          (6 <<  9)
+#define         AT91_US_NBSTOP          (3 << 12)               /* Number of Stop Bits */
+#define                 AT91_US_NBSTOP_1                (0 << 12)
+#define                 AT91_US_NBSTOP_1_5              (1 << 12)
+#define                 AT91_US_NBSTOP_2                (2 << 12)
+#define         AT91_US_CHMODE          (3 << 14)               /* Channel Mode */
+#define                 AT91_US_CHMODE_NORMAL           (0 << 14)
+#define                 AT91_US_CHMODE_ECHO             (1 << 14)
+#define                 AT91_US_CHMODE_LOC_LOOP         (2 << 14)
+#define                 AT91_US_CHMODE_REM_LOOP         (3 << 14)
+#define         AT91_US_MSBF            (1 << 16)               /* Bit Order */
+#define         AT91_US_MODE9           (1 << 17)               /* 9-bit Character Length */
+#define         AT91_US_CLKO            (1 << 18)               /* Clock Output Select */
+#define         AT91_US_OVER            (1 << 19)               /* Oversampling Mode */
+#define         AT91_US_INACK           (1 << 20)               /* Inhibit Non Acknowledge */
+#define         AT91_US_DSNACK          (1 << 21)               /* Disable Successive NACK */
+#define         AT91_US_MAX_ITER        (7 << 24)               /* Max Iterations */
+#define         AT91_US_FILTER          (1 << 28)               /* Infrared Receive Line Filter */
+
+#define AT91_US_IER             0x08                    /* Interrupt Enable Register */
+#define         AT91_US_RXRDY           (1 <<  0)               /* Receiver Ready */
+#define         AT91_US_TXRDY           (1 <<  1)               /* Transmitter Ready */
+#define         AT91_US_RXBRK           (1 <<  2)               /* Break Received / End of Break */
+#define         AT91_US_ENDRX           (1 <<  3)               /* End of Receiver Transfer */
+#define         AT91_US_ENDTX           (1 <<  4)               /* End of Transmitter Transfer */
+#define         AT91_US_OVRE            (1 <<  5)               /* Overrun Error */
+#define         AT91_US_FRAME           (1 <<  6)               /* Framing Error */
+#define         AT91_US_PARE            (1 <<  7)               /* Parity Error */
+#define         AT91_US_TIMEOUT         (1 <<  8)               /* Receiver Time-out */
+#define         AT91_US_TXEMPTY         (1 <<  9)               /* Transmitter Empty */
+#define         AT91_US_ITERATION       (1 << 10)               /* Max number of Repetitions Reached */
+#define         AT91_US_TXBUFE          (1 << 11)               /* Transmission Buffer Empty */
+#define         AT91_US_RXBUFF          (1 << 12)               /* Reception Buffer Full */
+#define         AT91_US_NACK            (1 << 13)               /* Non Acknowledge */
+#define         AT91_US_RIIC            (1 << 16)               /* Ring Indicator Input Change */
+#define         AT91_US_DSRIC           (1 << 17)               /* Data Set Ready Input Change */
+#define         AT91_US_DCDIC           (1 << 18)               /* Data Carrier Detect Input Change */
+#define         AT91_US_CTSIC           (1 << 19)               /* Clear to Send Input Change */
+#define         AT91_US_RI              (1 << 20)               /* RI */
+#define         AT91_US_DSR             (1 << 21)               /* DSR */
+#define         AT91_US_DCD             (1 << 22)               /* DCD */
+#define         AT91_US_CTS             (1 << 23)               /* CTS */
+
+#define AT91_US_IDR             0x0c                    /* Interrupt Disable Register */
+#define AT91_US_IMR             0x10                    /* Interrupt Mask Register */
+#define AT91_US_CSR             0x14                    /* Channel Status Register */
+#define AT91_US_RHR             0x18                    /* Receiver Holding Register */
+#define AT91_US_THR             0x1c                    /* Transmitter Holding Register */
+
+#define AT91_US_BRGR            0x20                    /* Baud Rate Generator Register */
+#define         AT91_US_CD              (0xffff << 0)           /* Clock Divider */
+
+#define AT91_US_RTOR            0x24                    /* Receiver Time-out Register */
+#define         AT91_US_TO              (0xffff << 0)           /* Time-out Value */
+
+#define AT91_US_TTGR            0x28                    /* Transmitter Timeguard Register */
+#define         AT91_US_TG              (0xff << 0)             /* Timeguard Value */
+
+#define AT91_US_FIDI            0x40                    /* FI DI Ratio Register */
+#define AT91_US_NER             0x44                    /* Number of Errors Register */
+#define AT91_US_IF              0x4c                    /* IrDA Filter Register */
+
+#endif