[PATCH] Serial: Split 8250 port table

Add separate files for the different 8250 ISA-based serial boards.

Looking across all the various architectures, it seems reasonable that
we can key the availability of the configuration options for these
beasts to the bus-related symbols (iow, CONFIG_ISA).  We also standardise
the base baud/uart clock rate for these boards - I'm sure that isn't
architecture specific, but is solely dependent on the crystal fitted
on the board (which should be the same no matter what type of machine
its fitted into.)

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 9 insertions, 16 deletions

diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index d8b9d2b8c200..34e75bc8f4cc 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -77,23 +77,9 @@ static unsigned int share_irqs = SERIAL8250_SHARE_IRQS;
  */
 #define is_real_interrupt(irq)  ((irq) != 0)
 
-/*
- * This converts from our new CONFIG_ symbols to the symbols
- * that asm/serial.h expects.  You _NEED_ to comment out the
- * linux/config.h include contained inside asm/serial.h for
- * this to work.
- */
-#undef CONFIG_SERIAL_MANY_PORTS
-#undef CONFIG_SERIAL_DETECT_IRQ
-#undef CONFIG_SERIAL_MULTIPORT
-#undef CONFIG_HUB6
-
 #ifdef CONFIG_SERIAL_8250_DETECT_IRQ
 #define CONFIG_SERIAL_DETECT_IRQ 1
 #endif
-#ifdef CONFIG_SERIAL_8250_MULTIPORT
-#define CONFIG_SERIAL_MULTIPORT 1
-#endif
 #ifdef CONFIG_SERIAL_8250_MANY_PORTS
 #define CONFIG_SERIAL_MANY_PORTS 1
 #endif
@@ -2323,10 +2309,11 @@ static int __devinit serial8250_probe(struct device *dev)
 {
         struct plat_serial8250_port *p = dev->platform_data;
         struct uart_port port;
+        int ret, i;
 
         memset(&port, 0, sizeof(struct uart_port));
 
-        for (; p && p->flags != 0; p++) {
+        for (i = 0; p && p->flags != 0; p++, i++) {
                 port.iobase     = p->iobase;
                 port.membase    = p->membase;
                 port.irq        = p->irq;
@@ -2335,10 +2322,16 @@ static int __devinit serial8250_probe(struct device *dev)
                 port.iotype     = p->iotype;
                 port.flags      = p->flags;
                 port.mapbase    = p->mapbase;
+                port.hub6       = p->hub6;
                 port.dev        = dev;
                 if (share_irqs)
                         port.flags |= UPF_SHARE_IRQ;
-                serial8250_register_port(&port);
+                ret = serial8250_register_port(&port);
+                if (ret < 0) {
+                        dev_err(dev, "unable to register port at index %d "
+                                "(IO%lx MEM%lx IRQ%d): %d\n", i,
+                                p->iobase, p->mapbase, p->irq, ret);
+                }
         }
         return 0;
 }