Fix compile errors in SGI console drivers (linux-next tree)

The below is the patch to replace blindly all possible places,
including Jack's fixes.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
(Reviewed and checked rather than blindly added)
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

1 files changed, 26 insertions, 26 deletions

diff --git a/drivers/serial/68360serial.c b/drivers/serial/68360serial.c
index d9d4e9552a4d..24661cd5e4fb 100644
--- a/drivers/serial/68360serial.c
+++ b/drivers/serial/68360serial.c
@@ -393,7 +393,7 @@ static void rs_360_start(struct tty_struct *tty)
 
 static _INLINE_ void receive_chars(ser_info_t *info)
 {
-        struct tty_struct *tty = info->tty;
+        struct tty_struct *tty = info->port.tty;
         unsigned char ch, flag, *cp;
         /*int   ignored = 0;*/
         int     i;
@@ -514,7 +514,7 @@ static _INLINE_ void receive_chars(ser_info_t *info)
 
 static _INLINE_ void receive_break(ser_info_t *info)
 {
-        struct tty_struct *tty = info->tty;
+        struct tty_struct *tty = info->port.tty;
 
         info->state->icount.brk++;
         /* Check to see if there is room in the tty buffer for
@@ -528,7 +528,7 @@ static _INLINE_ void transmit_chars(ser_info_t *info)
 {
 
         if ((info->flags & TX_WAKEUP) ||
-            (info->tty->flags & (1 << TTY_DO_WRITE_WAKEUP))) {
+            (info->port.tty->flags & (1 << TTY_DO_WRITE_WAKEUP))) {
                 schedule_work(&info->tqueue);
         }
 
@@ -584,12 +584,12 @@ static _INLINE_ void check_modem_status(struct async_struct *info)
                 }
         }
         if (info->flags & ASYNC_CTS_FLOW) {
-                if (info->tty->hw_stopped) {
+                if (info->port.tty->hw_stopped) {
                         if (status & UART_MSR_CTS) {
 #if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW))
                                 printk("CTS tx start...");
 #endif
-                                info->tty->hw_stopped = 0;
+                                info->port.tty->hw_stopped = 0;
                                 info->IER |= UART_IER_THRI;
                                 serial_out(info, UART_IER, info->IER);
                                 rs_sched_event(info, RS_EVENT_WRITE_WAKEUP);
@@ -600,7 +600,7 @@ static _INLINE_ void check_modem_status(struct async_struct *info)
 #if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW))
                                 printk("CTS tx stop...");
 #endif
-                                info->tty->hw_stopped = 1;
+                                info->port.tty->hw_stopped = 1;
                                 info->IER &= ~UART_IER_THRI;
                                 serial_out(info, UART_IER, info->IER);
                         }
@@ -670,7 +670,7 @@ static void do_softint(void *private_)
         ser_info_t      *info = (ser_info_t *) private_;
         struct tty_struct       *tty;
         
-        tty = info->tty;
+        tty = info->port.tty;
         if (!tty)
                 return;
 
@@ -693,7 +693,7 @@ static void do_serial_hangup(void *private_)
         struct async_struct     *info = (struct async_struct *) private_;
         struct tty_struct       *tty;
         
-        tty = info->tty;
+        tty = info->port.tty;
         if (!tty)
                 return;
 
@@ -721,8 +721,8 @@ static int startup(ser_info_t *info)
 
 #ifdef maybe
         if (!state->port || !state->type) {
-                if (info->tty)
-                        set_bit(TTY_IO_ERROR, &info->tty->flags);
+                if (info->port.tty)
+                        set_bit(TTY_IO_ERROR, &info->port.tty->flags);
                 goto errout;
         }
 #endif
@@ -734,12 +734,12 @@ static int startup(ser_info_t *info)
 
 #ifdef modem_control
         info->MCR = 0;
-        if (info->tty->termios->c_cflag & CBAUD)
+        if (info->port.tty->termios->c_cflag & CBAUD)
                 info->MCR = UART_MCR_DTR | UART_MCR_RTS;
 #endif
         
-        if (info->tty)
-                clear_bit(TTY_IO_ERROR, &info->tty->flags);
+        if (info->port.tty)
+                clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
 
         /*
          * and set the speed of the serial port
@@ -842,8 +842,8 @@ static void shutdown(ser_info_t *info)
                         smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
         }
         
-        if (info->tty)
-                set_bit(TTY_IO_ERROR, &info->tty->flags);
+        if (info->port.tty)
+                set_bit(TTY_IO_ERROR, &info->port.tty->flags);
 
         info->flags &= ~ASYNC_INITIALIZED;
         local_irq_restore(flags);
@@ -863,9 +863,9 @@ static void change_speed(ser_info_t *info)
         volatile struct smc_regs        *smcp;
         volatile struct scc_regs        *sccp;
 
-        if (!info->tty || !info->tty->termios)
+        if (!info->port.tty || !info->port.tty->termios)
                 return;
-        cflag = info->tty->termios->c_cflag;
+        cflag = info->port.tty->termios->c_cflag;
 
         state = info->state;
 
@@ -936,24 +936,24 @@ static void change_speed(ser_info_t *info)
          * Set up parity check flag
          */
         info->read_status_mask = (BD_SC_EMPTY | BD_SC_OV);
-        if (I_INPCK(info->tty))
+        if (I_INPCK(info->port.tty))
                 info->read_status_mask |= BD_SC_FR | BD_SC_PR;
-        if (I_BRKINT(info->tty) || I_PARMRK(info->tty))
+        if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
                 info->read_status_mask |= BD_SC_BR;
         
         /*
          * Characters to ignore
          */
         info->ignore_status_mask = 0;
-        if (I_IGNPAR(info->tty))
+        if (I_IGNPAR(info->port.tty))
                 info->ignore_status_mask |= BD_SC_PR | BD_SC_FR;
-        if (I_IGNBRK(info->tty)) {
+        if (I_IGNBRK(info->port.tty)) {
                 info->ignore_status_mask |= BD_SC_BR;
                 /*
                  * If we're ignore parity and break indicators, ignore 
                  * overruns too.  (For real raw support).
                  */
-                if (I_IGNPAR(info->tty))
+                if (I_IGNPAR(info->port.tty))
                         info->ignore_status_mask |= BD_SC_OV;
         }
         /*
@@ -1658,7 +1658,7 @@ static void rs_360_close(struct tty_struct *tty, struct file * filp)
         tty_ldisc_flush(tty);           
         tty->closing = 0;
         info->event = 0;
-        info->tty = 0;
+        info->port.tty = NULL;
         if (info->blocked_open) {
                 if (info->close_delay) {
                         msleep_interruptible(jiffies_to_msecs(info->close_delay));
@@ -1758,7 +1758,7 @@ static void rs_360_hangup(struct tty_struct *tty)
         info->event = 0;
         state->count = 0;
         info->flags &= ~ASYNC_NORMAL_ACTIVE;
-        info->tty = 0;
+        info->port.tty = NULL;
         wake_up_interruptible(&info->open_wait);
 }
 
@@ -1919,7 +1919,7 @@ static int rs_360_open(struct tty_struct *tty, struct file * filp)
         printk("rs_open %s, count = %d\n", tty->name, info->state->count);
 #endif
         tty->driver_data = info;
-        info->tty = tty;
+        info->port.tty = tty;
 
         /*
          * Start up serial port
@@ -1976,7 +1976,7 @@ static inline int line_info(char *buf, struct serial_state *state)
                 info->port = state->port;
                 info->flags = state->flags;
                 info->quot = 0;
-                info->tty = 0;
+                info->port.tty = NULL;
         }
         local_irq_disable();
         status = serial_in(info, UART_MSR);