pcmcia: do not use io_req_t when calling pcmcia_request_io()

Instead of io_req_t, drivers are now requested to fill out
struct pcmcia_device *p_dev->resource[0,1] for up to two ioport
ranges. After a call to pcmcia_request_io(), the ports found there
are reserved, after calling pcmcia_request_configuration(), they may
be used.

CC: netdev@vger.kernel.org
CC: linux-wireless@vger.kernel.org
CC: linux-ide@vger.kernel.org
CC: linux-usb@vger.kernel.org
CC: laforge@gnumonks.org
CC: linux-mtd@lists.infradead.org
CC: alsa-devel@alsa-project.org
CC: linux-serial@vger.kernel.org
CC: Michael Buesch <mb@bu3sch.de>
Acked-by: Marcel Holtmann <marcel@holtmann.org> (for drivers/bluetooth/)
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>

5 files changed, 40 insertions, 42 deletions

diff --git a/drivers/scsi/pcmcia/aha152x_stub.c b/drivers/scsi/pcmcia/aha152x_stub.c
index 3e040f503afa..61f49bdcc0c2 100644
--- a/drivers/scsi/pcmcia/aha152x_stub.c
+++ b/drivers/scsi/pcmcia/aha152x_stub.c
@@ -100,9 +100,8 @@ static int aha152x_probe(struct pcmcia_device *link)
     info->p_dev = link;
     link->priv = info;
 
-    link->io.NumPorts1 = 0x20;
-    link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-    link->io.IOAddrLines = 10;
+    link->resource[0]->end = 0x20;
+    link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
     link->conf.Attributes = CONF_ENABLE_IRQ;
     link->conf.IntType = INT_MEMORY_AND_IO;
     link->conf.Present = PRESENT_OPTION;
@@ -130,15 +129,16 @@ static int aha152x_config_check(struct pcmcia_device *p_dev,
                                 unsigned int vcc,
                                 void *priv_data)
 {
+        p_dev->io_lines = 10;
         /* For New Media T&J, look for a SCSI window */
         if (cfg->io.win[0].len >= 0x20)
-                p_dev->io.BasePort1 = cfg->io.win[0].base;
+                p_dev->resource[0]->start = cfg->io.win[0].base;
         else if ((cfg->io.nwin > 1) &&
                  (cfg->io.win[1].len >= 0x20))
-                p_dev->io.BasePort1 = cfg->io.win[1].base;
+                p_dev->resource[0]->start = cfg->io.win[1].base;
         if ((cfg->io.nwin > 0) &&
-            (p_dev->io.BasePort1 < 0xffff)) {
-                if (!pcmcia_request_io(p_dev, &p_dev->io))
+            (p_dev->resource[0]->start < 0xffff)) {
+                if (!pcmcia_request_io(p_dev))
                         return 0;
         }
         return -EINVAL;
diff --git a/drivers/scsi/pcmcia/fdomain_stub.c b/drivers/scsi/pcmcia/fdomain_stub.c
index 49a9a0a60c82..13dbe5c48492 100644
--- a/drivers/scsi/pcmcia/fdomain_stub.c
+++ b/drivers/scsi/pcmcia/fdomain_stub.c
@@ -83,9 +83,8 @@ static int fdomain_probe(struct pcmcia_device *link)
 
         info->p_dev = link;
         link->priv = info;
-        link->io.NumPorts1 = 0x10;
-        link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-        link->io.IOAddrLines = 10;
+        link->resource[0]->end = 0x10;
+        link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
         link->conf.Attributes = CONF_ENABLE_IRQ;
         link->conf.IntType = INT_MEMORY_AND_IO;
         link->conf.Present = PRESENT_OPTION;
@@ -112,8 +111,9 @@ static int fdomain_config_check(struct pcmcia_device *p_dev,
                                 unsigned int vcc,
                                 void *priv_data)
 {
-        p_dev->io.BasePort1 = cfg->io.win[0].base;
-        return pcmcia_request_io(p_dev, &p_dev->io);
+        p_dev->io_lines = 10;
+        p_dev->resource[0]->start = cfg->io.win[0].base;
+        return pcmcia_request_io(p_dev);
 }
 
 
diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c
index d929891809ab..8bb598bb440d 100644
--- a/drivers/scsi/pcmcia/nsp_cs.c
+++ b/drivers/scsi/pcmcia/nsp_cs.c
@@ -1558,9 +1558,8 @@ static int nsp_cs_probe(struct pcmcia_device *link)
         nsp_dbg(NSP_DEBUG_INIT, "info=0x%p", info);
 
         /* The io structure describes IO port mapping */
-        link->io.NumPorts1       = 0x10;
-        link->io.Attributes1     = IO_DATA_PATH_WIDTH_AUTO;
-        link->io.IOAddrLines     = 10;  /* not used */
+        link->resource[0]->end   = 0x10;
+        link->resource[0]->flags = IO_DATA_PATH_WIDTH_AUTO;
 
         /* General socket configuration */
         link->conf.Attributes    = CONF_ENABLE_IRQ;
@@ -1641,24 +1640,23 @@ static int nsp_cs_config_check(struct pcmcia_device *p_dev,
                 p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
 
                 /* IO window settings */
-                p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+                p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
                 if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
                         cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
-                        p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-                        if (!(io->flags & CISTPL_IO_8BIT))
-                                p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
-                        if (!(io->flags & CISTPL_IO_16BIT))
-                                p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
-                        p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
-                        p_dev->io.BasePort1 = io->win[0].base;
-                        p_dev->io.NumPorts1 = io->win[0].len;
+                        p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
+                        p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+                        p_dev->resource[0]->flags |=
+                                pcmcia_io_cfg_data_width(io->flags);
+                        p_dev->resource[0]->start = io->win[0].base;
+                        p_dev->resource[0]->end = io->win[0].len;
                         if (io->nwin > 1) {
-                                p_dev->io.Attributes2 = p_dev->io.Attributes1;
-                                p_dev->io.BasePort2 = io->win[1].base;
-                                p_dev->io.NumPorts2 = io->win[1].len;
+                                p_dev->resource[1]->flags =
+                                        p_dev->resource[0]->flags;
+                                p_dev->resource[1]->start = io->win[1].base;
+                                p_dev->resource[1]->end = io->win[1].len;
                         }
                         /* This reserves IO space but doesn't actually enable it */
-                        if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
+                        if (pcmcia_request_io(p_dev) != 0)
                                 goto next_entry;
                 }
 
diff --git a/drivers/scsi/pcmcia/qlogic_stub.c b/drivers/scsi/pcmcia/qlogic_stub.c
index 4e2b83f26232..eb775f1a523c 100644
--- a/drivers/scsi/pcmcia/qlogic_stub.c
+++ b/drivers/scsi/pcmcia/qlogic_stub.c
@@ -156,9 +156,8 @@ static int qlogic_probe(struct pcmcia_device *link)
                 return -ENOMEM;
         info->p_dev = link;
         link->priv = info;
-        link->io.NumPorts1 = 16;
-        link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-        link->io.IOAddrLines = 10;
+        link->resource[0]->end = 16;
+        link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
         link->conf.Attributes = CONF_ENABLE_IRQ;
         link->conf.IntType = INT_MEMORY_AND_IO;
         link->conf.Present = PRESENT_OPTION;
@@ -185,13 +184,14 @@ static int qlogic_config_check(struct pcmcia_device *p_dev,
                                unsigned int vcc,
                                void *priv_data)
 {
-        p_dev->io.BasePort1 = cfg->io.win[0].base;
-        p_dev->io.NumPorts1 = cfg->io.win[0].len;
+        p_dev->io_lines = 10;
+        p_dev->resource[0]->start = cfg->io.win[0].base;
+        p_dev->resource[0]->end = cfg->io.win[0].len;
 
-        if (p_dev->io.BasePort1 == 0)
+        if (p_dev->resource[0]->start == 0)
                 return -ENODEV;
 
-        return pcmcia_request_io(p_dev, &p_dev->io);
+        return pcmcia_request_io(p_dev);
 }
 
 static int qlogic_config(struct pcmcia_device * link)
diff --git a/drivers/scsi/pcmcia/sym53c500_cs.c b/drivers/scsi/pcmcia/sym53c500_cs.c
index d99c0cbad2de..321e390c9120 100644
--- a/drivers/scsi/pcmcia/sym53c500_cs.c
+++ b/drivers/scsi/pcmcia/sym53c500_cs.c
@@ -690,13 +690,14 @@ static int SYM53C500_config_check(struct pcmcia_device *p_dev,
                                   unsigned int vcc,
                                   void *priv_data)
 {
-        p_dev->io.BasePort1 = cfg->io.win[0].base;
-        p_dev->io.NumPorts1 = cfg->io.win[0].len;
+        p_dev->io_lines = 10;
+        p_dev->resource[0]->start = cfg->io.win[0].base;
+        p_dev->resource[0]->end = cfg->io.win[0].len;
 
-        if (p_dev->io.BasePort1 == 0)
+        if (p_dev->resource[0]->start == 0)
                 return -ENODEV;
 
-        return pcmcia_request_io(p_dev, &p_dev->io);
+        return pcmcia_request_io(p_dev);
 }
 
 static int
@@ -858,9 +859,8 @@ SYM53C500_probe(struct pcmcia_device *link)
                 return -ENOMEM;
         info->p_dev = link;
         link->priv = info;
-        link->io.NumPorts1 = 16;
-        link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-        link->io.IOAddrLines = 10;
+        link->resource[0]->end = 16;
+        link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
         link->conf.Attributes = CONF_ENABLE_IRQ;
         link->conf.IntType = INT_MEMORY_AND_IO;