[SCSI] megaraid_sas: Rename megaraid_sas.c to megaraid_sas_base.c

This patch renames megaraid_sas.c to megaraid_sas_base.c to facilitate
other files in the compile.

Signed-off-by: Adam Radford <aradford@gmail.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

2 files changed, 24 insertions, 23 deletions

diff --git a/drivers/scsi/megaraid/Makefile b/drivers/scsi/megaraid/Makefile
index f469915b97c3..6613a2ceea03 100644
--- a/drivers/scsi/megaraid/Makefile
+++ b/drivers/scsi/megaraid/Makefile
@@ -1,3 +1,4 @@
 obj-$(CONFIG_MEGARAID_MM)       += megaraid_mm.o
 obj-$(CONFIG_MEGARAID_MAILBOX)  += megaraid_mbox.o
 obj-$(CONFIG_MEGARAID_SAS)      += megaraid_sas.o
+megaraid_sas-objs := megaraid_sas_base.o
diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index 7451bc096a01..427f0f795947 100644
--- a/drivers/scsi/megaraid/megaraid_sas.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -167,7 +167,7 @@ megasas_return_cmd(struct megasas_instance *instance, struct megasas_cmd *cmd)
 
 
 /**
-*       The following functions are defined for xscale 
+*       The following functions are defined for xscale
 *       (deviceid : 1064R, PERC5) controllers
 */
 
@@ -210,7 +210,7 @@ megasas_read_fw_status_reg_xscale(struct megasas_register_set __iomem * regs)
  * megasas_clear_interrupt_xscale -     Check & clear interrupt
  * @regs:                               MFI register set
  */
-static int 
+static int
 megasas_clear_intr_xscale(struct megasas_register_set __iomem * regs)
 {
         u32 status;
@@ -243,7 +243,7 @@ megasas_clear_intr_xscale(struct megasas_register_set __iomem * regs)
  * @frame_count :               Number of frames for the command
  * @regs :                      MFI register set
  */
-static inline void 
+static inline void
 megasas_fire_cmd_xscale(struct megasas_instance *instance,
                 dma_addr_t frame_phys_addr,
                 u32 frame_count,
@@ -326,12 +326,12 @@ static struct megasas_instance_template megasas_instance_template_xscale = {
 };
 
 /**
-*       This is the end of set of functions & definitions specific 
+*       This is the end of set of functions & definitions specific
 *       to xscale (deviceid : 1064R, PERC5) controllers
 */
 
 /**
-*       The following functions are defined for ppc (deviceid : 0x60) 
+*       The following functions are defined for ppc (deviceid : 0x60)
 *       controllers
 */
 
@@ -343,7 +343,7 @@ static inline void
 megasas_enable_intr_ppc(struct megasas_register_set __iomem * regs)
 {
         writel(0xFFFFFFFF, &(regs)->outbound_doorbell_clear);
-    
+
         writel(~0x80000000, &(regs)->outbound_intr_mask);
 
         /* Dummy readl to force pci flush */
@@ -377,7 +377,7 @@ megasas_read_fw_status_reg_ppc(struct megasas_register_set __iomem * regs)
  * megasas_clear_interrupt_ppc -        Check & clear interrupt
  * @regs:                               MFI register set
  */
-static int 
+static int
 megasas_clear_intr_ppc(struct megasas_register_set __iomem * regs)
 {
         u32 status;
@@ -406,7 +406,7 @@ megasas_clear_intr_ppc(struct megasas_register_set __iomem * regs)
  * @frame_count :               Number of frames for the command
  * @regs :                      MFI register set
  */
-static inline void 
+static inline void
 megasas_fire_cmd_ppc(struct megasas_instance *instance,
                 dma_addr_t frame_phys_addr,
                 u32 frame_count,
@@ -414,7 +414,7 @@ megasas_fire_cmd_ppc(struct megasas_instance *instance,
 {
         unsigned long flags;
         spin_lock_irqsave(&instance->hba_lock, flags);
-        writel((frame_phys_addr | (frame_count<<1))|1, 
+        writel((frame_phys_addr | (frame_count<<1))|1,
                         &(regs)->inbound_queue_port);
         spin_unlock_irqrestore(&instance->hba_lock, flags);
 }
@@ -441,7 +441,7 @@ megasas_check_reset_ppc(struct megasas_instance *instance,
         return 0;
 }
 static struct megasas_instance_template megasas_instance_template_ppc = {
-        
+
         .fire_cmd = megasas_fire_cmd_ppc,
         .enable_intr = megasas_enable_intr_ppc,
         .disable_intr = megasas_disable_intr_ppc,
@@ -754,7 +754,7 @@ static struct megasas_instance_template megasas_instance_template_gen2 = {
 /**
  * megasas_issue_polled -       Issues a polling command
  * @instance:                   Adapter soft state
- * @cmd:                        Command packet to be issued 
+ * @cmd:                        Command packet to be issued
  *
  * For polling, MFI requires the cmd_status to be set to 0xFF before posting.
  */
@@ -1242,9 +1242,9 @@ megasas_build_ldio(struct megasas_instance *instance, struct scsi_cmnd *scp,
 /**
  * megasas_is_ldio -            Checks if the cmd is for logical drive
  * @scmd:                       SCSI command
- *      
+ *
  * Called by megasas_queue_command to find out if the command to be queued
- * is a logical drive command   
+ * is a logical drive command
  */
 static inline int megasas_is_ldio(struct scsi_cmnd *cmd)
 {
@@ -2000,8 +2000,8 @@ megasas_complete_int_cmd(struct megasas_instance *instance,
  * @instance:                   Adapter soft state
  * @cmd:                        Cmd that was issued to abort another cmd
  *
- * The megasas_issue_blocked_abort_cmd() function waits on abort_cmd_wait_q 
- * after it issues an abort on a previously issued command. This function 
+ * The megasas_issue_blocked_abort_cmd() function waits on abort_cmd_wait_q
+ * after it issues an abort on a previously issued command. This function
  * wakes up all functions waiting on the same wait queue.
  */
 static void
@@ -2021,7 +2021,7 @@ megasas_complete_abort(struct megasas_instance *instance,
  * megasas_complete_cmd -       Completes a command
  * @instance:                   Adapter soft state
  * @cmd:                        Command to be completed
- * @alt_status:                 If non-zero, use this value as status to 
+ * @alt_status:                 If non-zero, use this value as status to
  *                              SCSI mid-layer instead of the value returned
  *                              by the FW. This should be used if caller wants
  *                              an alternate status (as in the case of aborted
@@ -2476,8 +2476,8 @@ megasas_transition_to_ready(struct megasas_instance* instance)
         fw_state = instance->instancet->read_fw_status_reg(instance->reg_set) & MFI_STATE_MASK;
 
         if (fw_state != MFI_STATE_READY)
-                printk(KERN_INFO "megasas: Waiting for FW to come to ready"
-                       " state\n");
+                printk(KERN_INFO "megasas: Waiting for FW to come to ready"
+                       " state\n");
 
         while (fw_state != MFI_STATE_READY) {
 
@@ -2590,7 +2590,7 @@ megasas_transition_to_ready(struct megasas_instance* instance)
                  * The cur_state should not last for more than max_wait secs
                  */
                 for (i = 0; i < (max_wait * 1000); i++) {
-                        fw_state = instance->instancet->read_fw_status_reg(instance->reg_set) &  
+                        fw_state = instance->instancet->read_fw_status_reg(instance->reg_set) &
                                         MFI_STATE_MASK ;
                 curr_abs_state =
                 instance->instancet->read_fw_status_reg(instance->reg_set);
@@ -2610,7 +2610,7 @@ megasas_transition_to_ready(struct megasas_instance* instance)
                         return -ENODEV;
                 }
         }
-        printk(KERN_INFO "megasas: FW now in Ready state\n");
+        printk(KERN_INFO "megasas: FW now in Ready state\n");
 
         return 0;
 }
@@ -3290,7 +3290,7 @@ static int megasas_init_mfi(struct megasas_instance *instance)
          * does not exceed max cmds that the FW can support
          */
         instance->max_fw_cmds = instance->max_fw_cmds-1;
-        instance->max_num_sge = (instance->instancet->read_fw_status_reg(reg_set) & 0xFF0000) >> 
+        instance->max_num_sge = (instance->instancet->read_fw_status_reg(reg_set) & 0xFF0000) >>
                                         0x10;
         /*
          * Create a pool of commands
@@ -3733,7 +3733,7 @@ fail_set_dma_mask:
 /**
  * megasas_probe_one -  PCI hotplug entry point
  * @pdev:               PCI device structure
- * @id:                 PCI ids of supported hotplugged adapter 
+ * @id:                 PCI ids of supported hotplugged adapter
  */
 static int __devinit
 megasas_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
@@ -5165,7 +5165,7 @@ err_dcf_attr_ver:
         pci_unregister_driver(&megasas_pci_driver);
 err_pcidrv:
         unregister_chrdev(megasas_mgmt_majorno, "megaraid_sas_ioctl");
-        return rval;
+        return rval;
 }
 
 /**