Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 1333 insertions, 0 deletions

diff --git a/drivers/scsi/sym53c8xx_defs.h b/drivers/scsi/sym53c8xx_defs.h
new file mode 100644
index 000000000000..4c4ae7d4713f
--- /dev/null
+++ b/drivers/scsi/sym53c8xx_defs.h
@@ -0,0 +1,1333 @@
+/******************************************************************************
+**  High Performance device driver for the Symbios 53C896 controller.
+**
+**  Copyright (C) 1998-2001  Gerard Roudier <groudier@free.fr>
+**
+**  This driver also supports all the Symbios 53C8XX controller family, 
+**  except 53C810 revisions < 16, 53C825 revisions < 16 and all 
+**  revisions of 53C815 controllers.
+**
+**  This driver is based on the Linux port of the FreeBSD ncr driver.
+** 
+**  Copyright (C) 1994  Wolfgang Stanglmeier
+**  
+**-----------------------------------------------------------------------------
+**  
+**  This program is free software; you can redistribute it and/or modify
+**  it under the terms of the GNU General Public License as published by
+**  the Free Software Foundation; either version 2 of the License, or
+**  (at your option) any later version.
+**
+**  This program is distributed in the hope that it will be useful,
+**  but WITHOUT ANY WARRANTY; without even the implied warranty of
+**  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+**  GNU General Public License for more details.
+**
+**  You should have received a copy of the GNU General Public License
+**  along with this program; if not, write to the Free Software
+**  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+**
+**-----------------------------------------------------------------------------
+**
+**  The Linux port of the FreeBSD ncr driver has been achieved in 
+**  november 1995 by:
+**
+**          Gerard Roudier              <groudier@free.fr>
+**
+**  Being given that this driver originates from the FreeBSD version, and
+**  in order to keep synergy on both, any suggested enhancements and corrections
+**  received on Linux are automatically a potential candidate for the FreeBSD 
+**  version.
+**
+**  The original driver has been written for 386bsd and FreeBSD by
+**          Wolfgang Stanglmeier        <wolf@cologne.de>
+**          Stefan Esser                <se@mi.Uni-Koeln.de>
+**
+**-----------------------------------------------------------------------------
+**
+**  Major contributions:
+**  --------------------
+**
+**  NVRAM detection and reading.
+**    Copyright (C) 1997 Richard Waltham <dormouse@farsrobt.demon.co.uk>
+**
+**  Added support for MIPS big endian systems.
+**    Carsten Langgaard, carstenl@mips.com
+**    Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
+**
+**  Added support for HP PARISC big endian systems.
+**    Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
+**
+*******************************************************************************
+*/
+
+#ifndef SYM53C8XX_DEFS_H
+#define SYM53C8XX_DEFS_H
+
+#include <linux/config.h>
+
+/*
+**      If you want a driver as small as possible, donnot define the 
+**      following options.
+*/
+#define SCSI_NCR_BOOT_COMMAND_LINE_SUPPORT
+#define SCSI_NCR_DEBUG_INFO_SUPPORT
+
+/*
+**      To disable integrity checking, do not define the 
+**      following option.
+*/
+#ifdef  CONFIG_SCSI_NCR53C8XX_INTEGRITY_CHECK
+#       define SCSI_NCR_ENABLE_INTEGRITY_CHECK
+#endif
+
+/* ---------------------------------------------------------------------
+** Take into account kernel configured parameters.
+** Most of these options can be overridden at startup by a command line.
+** ---------------------------------------------------------------------
+*/
+
+/*
+ * For Ultra2 and Ultra3 SCSI support option, use special features. 
+ *
+ * Value (default) means:
+ *      bit 0 : all features enabled, except:
+ *              bit 1 : PCI Write And Invalidate.
+ *              bit 2 : Data Phase Mismatch handling from SCRIPTS.
+ *
+ * Use boot options ncr53c8xx=specf:1 if you want all chip features to be 
+ * enabled by the driver.
+ */
+#define SCSI_NCR_SETUP_SPECIAL_FEATURES         (3)
+
+#define SCSI_NCR_MAX_SYNC                       (80)
+
+/*
+ * Allow tags from 2 to 256, default 8
+ */
+#ifdef  CONFIG_SCSI_NCR53C8XX_MAX_TAGS
+#if     CONFIG_SCSI_NCR53C8XX_MAX_TAGS < 2
+#define SCSI_NCR_MAX_TAGS       (2)
+#elif   CONFIG_SCSI_NCR53C8XX_MAX_TAGS > 256
+#define SCSI_NCR_MAX_TAGS       (256)
+#else
+#define SCSI_NCR_MAX_TAGS       CONFIG_SCSI_NCR53C8XX_MAX_TAGS
+#endif
+#else
+#define SCSI_NCR_MAX_TAGS       (8)
+#endif
+
+/*
+ * Allow tagged command queuing support if configured with default number 
+ * of tags set to max (see above).
+ */
+#ifdef  CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS
+#define SCSI_NCR_SETUP_DEFAULT_TAGS     CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS
+#elif   defined CONFIG_SCSI_NCR53C8XX_TAGGED_QUEUE
+#define SCSI_NCR_SETUP_DEFAULT_TAGS     SCSI_NCR_MAX_TAGS
+#else
+#define SCSI_NCR_SETUP_DEFAULT_TAGS     (0)
+#endif
+
+/*
+ * Immediate arbitration
+ */
+#if defined(CONFIG_SCSI_NCR53C8XX_IARB)
+#define SCSI_NCR_IARB_SUPPORT
+#endif
+
+/*
+ * Sync transfer frequency at startup.
+ * Allow from 5Mhz to 80Mhz default 20 Mhz.
+ */
+#ifndef CONFIG_SCSI_NCR53C8XX_SYNC
+#define CONFIG_SCSI_NCR53C8XX_SYNC      (20)
+#elif   CONFIG_SCSI_NCR53C8XX_SYNC > SCSI_NCR_MAX_SYNC
+#undef  CONFIG_SCSI_NCR53C8XX_SYNC
+#define CONFIG_SCSI_NCR53C8XX_SYNC      SCSI_NCR_MAX_SYNC
+#endif
+
+#if     CONFIG_SCSI_NCR53C8XX_SYNC == 0
+#define SCSI_NCR_SETUP_DEFAULT_SYNC     (255)
+#elif   CONFIG_SCSI_NCR53C8XX_SYNC <= 5
+#define SCSI_NCR_SETUP_DEFAULT_SYNC     (50)
+#elif   CONFIG_SCSI_NCR53C8XX_SYNC <= 20
+#define SCSI_NCR_SETUP_DEFAULT_SYNC     (250/(CONFIG_SCSI_NCR53C8XX_SYNC))
+#elif   CONFIG_SCSI_NCR53C8XX_SYNC <= 33
+#define SCSI_NCR_SETUP_DEFAULT_SYNC     (11)
+#elif   CONFIG_SCSI_NCR53C8XX_SYNC <= 40
+#define SCSI_NCR_SETUP_DEFAULT_SYNC     (10)
+#else
+#define SCSI_NCR_SETUP_DEFAULT_SYNC     (9)
+#endif
+
+/*
+ * Disallow disconnections at boot-up
+ */
+#ifdef CONFIG_SCSI_NCR53C8XX_NO_DISCONNECT
+#define SCSI_NCR_SETUP_DISCONNECTION    (0)
+#else
+#define SCSI_NCR_SETUP_DISCONNECTION    (1)
+#endif
+
+/*
+ * Force synchronous negotiation for all targets
+ */
+#ifdef CONFIG_SCSI_NCR53C8XX_FORCE_SYNC_NEGO
+#define SCSI_NCR_SETUP_FORCE_SYNC_NEGO  (1)
+#else
+#define SCSI_NCR_SETUP_FORCE_SYNC_NEGO  (0)
+#endif
+
+/*
+ * Disable master parity checking (flawed hardwares need that)
+ */
+#ifdef CONFIG_SCSI_NCR53C8XX_DISABLE_MPARITY_CHECK
+#define SCSI_NCR_SETUP_MASTER_PARITY    (0)
+#else
+#define SCSI_NCR_SETUP_MASTER_PARITY    (1)
+#endif
+
+/*
+ * Disable scsi parity checking (flawed devices may need that)
+ */
+#ifdef CONFIG_SCSI_NCR53C8XX_DISABLE_PARITY_CHECK
+#define SCSI_NCR_SETUP_SCSI_PARITY      (0)
+#else
+#define SCSI_NCR_SETUP_SCSI_PARITY      (1)
+#endif
+
+/*
+ * Settle time after reset at boot-up
+ */
+#define SCSI_NCR_SETUP_SETTLE_TIME      (2)
+
+/*
+**      Bridge quirks work-around option defaulted to 1.
+*/
+#ifndef SCSI_NCR_PCIQ_WORK_AROUND_OPT
+#define SCSI_NCR_PCIQ_WORK_AROUND_OPT   1
+#endif
+
+/*
+**      Work-around common bridge misbehaviour.
+**
+**      - Do not flush posted writes in the opposite 
+**        direction on read.
+**      - May reorder DMA writes to memory.
+**
+**      This option should not affect performances 
+**      significantly, so it is the default.
+*/
+#if     SCSI_NCR_PCIQ_WORK_AROUND_OPT == 1
+#define SCSI_NCR_PCIQ_MAY_NOT_FLUSH_PW_UPSTREAM
+#define SCSI_NCR_PCIQ_MAY_REORDER_WRITES
+#define SCSI_NCR_PCIQ_MAY_MISS_COMPLETIONS
+
+/*
+**      Same as option 1, but also deal with 
+**      misconfigured interrupts.
+**
+**      - Edge triggerred instead of level sensitive.
+**      - No interrupt line connected.
+**      - IRQ number misconfigured.
+**      
+**      If no interrupt is delivered, the driver will 
+**      catch the interrupt conditions 10 times per 
+**      second. No need to say that this option is 
+**      not recommended.
+*/
+#elif   SCSI_NCR_PCIQ_WORK_AROUND_OPT == 2
+#define SCSI_NCR_PCIQ_MAY_NOT_FLUSH_PW_UPSTREAM
+#define SCSI_NCR_PCIQ_MAY_REORDER_WRITES
+#define SCSI_NCR_PCIQ_MAY_MISS_COMPLETIONS
+#define SCSI_NCR_PCIQ_BROKEN_INTR
+
+/*
+**      Some bridge designers decided to flush 
+**      everything prior to deliver the interrupt.
+**      This option tries to deal with such a 
+**      behaviour.
+*/
+#elif   SCSI_NCR_PCIQ_WORK_AROUND_OPT == 3
+#define SCSI_NCR_PCIQ_SYNC_ON_INTR
+#endif
+
+/*
+**      Other parameters not configurable with "make config"
+**      Avoid to change these constants, unless you know what you are doing.
+*/
+
+#define SCSI_NCR_ALWAYS_SIMPLE_TAG
+#define SCSI_NCR_MAX_SCATTER    (127)
+#define SCSI_NCR_MAX_TARGET     (16)
+
+/*
+**   Compute some desirable value for CAN_QUEUE 
+**   and CMD_PER_LUN.
+**   The driver will use lower values if these 
+**   ones appear to be too large.
+*/
+#define SCSI_NCR_CAN_QUEUE      (8*SCSI_NCR_MAX_TAGS + 2*SCSI_NCR_MAX_TARGET)
+#define SCSI_NCR_CMD_PER_LUN    (SCSI_NCR_MAX_TAGS)
+
+#define SCSI_NCR_SG_TABLESIZE   (SCSI_NCR_MAX_SCATTER)
+#define SCSI_NCR_TIMER_INTERVAL (HZ)
+
+#if 1 /* defined CONFIG_SCSI_MULTI_LUN */
+#define SCSI_NCR_MAX_LUN        (16)
+#else
+#define SCSI_NCR_MAX_LUN        (1)
+#endif
+
+/*
+**      These simple macros limit expression involving 
+**      kernel time values (jiffies) to some that have 
+**      chance not to be too much incorrect. :-)
+*/
+#define ktime_get(o)            (jiffies + (u_long) o)
+#define ktime_exp(b)            ((long)(jiffies) - (long)(b) >= 0)
+#define ktime_dif(a, b)         ((long)(a) - (long)(b))
+/* These ones are not used in this driver */
+#define ktime_add(a, o)         ((a) + (u_long)(o))
+#define ktime_sub(a, o)         ((a) - (u_long)(o))
+
+
+/*
+ *  IO functions definition for big/little endian CPU support.
+ *  For now, the NCR is only supported in little endian addressing mode, 
+ */
+
+#ifdef  __BIG_ENDIAN
+
+#define inw_l2b         inw
+#define inl_l2b         inl
+#define outw_b2l        outw
+#define outl_b2l        outl
+
+#define readb_raw       readb
+#define writeb_raw      writeb
+
+#if defined(SCSI_NCR_BIG_ENDIAN)
+#define readw_l2b       __raw_readw
+#define readl_l2b       __raw_readl
+#define writew_b2l      __raw_writew
+#define writel_b2l      __raw_writel
+#define readw_raw       __raw_readw
+#define readl_raw       __raw_readl
+#define writew_raw      __raw_writew
+#define writel_raw      __raw_writel
+#else   /* Other big-endian */
+#define readw_l2b       readw
+#define readl_l2b       readl
+#define writew_b2l      writew
+#define writel_b2l      writel
+#define readw_raw       readw
+#define readl_raw       readl
+#define writew_raw      writew
+#define writel_raw      writel
+#endif
+
+#else   /* little endian */
+
+#define inw_raw         inw
+#define inl_raw         inl
+#define outw_raw        outw
+#define outl_raw        outl
+
+#define readb_raw       readb
+#define readw_raw       readw
+#define readl_raw       readl
+#define writeb_raw      writeb
+#define writew_raw      writew
+#define writel_raw      writel
+
+#endif
+
+#if !defined(__hppa__) && !defined(__mips__)
+#ifdef  SCSI_NCR_BIG_ENDIAN
+#error  "The NCR in BIG ENDIAN addressing mode is not (yet) supported"
+#endif
+#endif
+
+#define MEMORY_BARRIER()        mb()
+
+
+/*
+ *  If the NCR uses big endian addressing mode over the 
+ *  PCI, actual io register addresses for byte and word 
+ *  accesses must be changed according to lane routing.
+ *  Btw, ncr_offb() and ncr_offw() macros only apply to 
+ *  constants and so donnot generate bloated code.
+ */
+
+#if     defined(SCSI_NCR_BIG_ENDIAN)
+
+#define ncr_offb(o)     (((o)&~3)+((~((o)&3))&3))
+#define ncr_offw(o)     (((o)&~3)+((~((o)&3))&2))
+
+#else
+
+#define ncr_offb(o)     (o)
+#define ncr_offw(o)     (o)
+
+#endif
+
+/*
+ *  If the CPU and the NCR use same endian-ness addressing,
+ *  no byte reordering is needed for script patching.
+ *  Macro cpu_to_scr() is to be used for script patching.
+ *  Macro scr_to_cpu() is to be used for getting a DWORD 
+ *  from the script.
+ */
+
+#if     defined(__BIG_ENDIAN) && !defined(SCSI_NCR_BIG_ENDIAN)
+
+#define cpu_to_scr(dw)  cpu_to_le32(dw)
+#define scr_to_cpu(dw)  le32_to_cpu(dw)
+
+#elif   defined(__LITTLE_ENDIAN) && defined(SCSI_NCR_BIG_ENDIAN)
+
+#define cpu_to_scr(dw)  cpu_to_be32(dw)
+#define scr_to_cpu(dw)  be32_to_cpu(dw)
+
+#else
+
+#define cpu_to_scr(dw)  (dw)
+#define scr_to_cpu(dw)  (dw)
+
+#endif
+
+/*
+ *  Access to the controller chip.
+ *
+ *  If the CPU and the NCR use same endian-ness addressing,
+ *  no byte reordering is needed for accessing chip io 
+ *  registers. Functions suffixed by '_raw' are assumed 
+ *  to access the chip over the PCI without doing byte 
+ *  reordering. Functions suffixed by '_l2b' are 
+ *  assumed to perform little-endian to big-endian byte 
+ *  reordering, those suffixed by '_b2l' blah, blah,
+ *  blah, ...
+ */
+
+/*
+ *  MEMORY mapped IO input / output
+ */
+
+#define INB_OFF(o)              readb_raw((char __iomem *)np->reg + ncr_offb(o))
+#define OUTB_OFF(o, val)        writeb_raw((val), (char __iomem *)np->reg + ncr_offb(o))
+
+#if     defined(__BIG_ENDIAN) && !defined(SCSI_NCR_BIG_ENDIAN)
+
+#define INW_OFF(o)              readw_l2b((char __iomem *)np->reg + ncr_offw(o))
+#define INL_OFF(o)              readl_l2b((char __iomem *)np->reg + (o))
+
+#define OUTW_OFF(o, val)        writew_b2l((val), (char __iomem *)np->reg + ncr_offw(o))
+#define OUTL_OFF(o, val)        writel_b2l((val), (char __iomem *)np->reg + (o))
+
+#elif   defined(__LITTLE_ENDIAN) && defined(SCSI_NCR_BIG_ENDIAN)
+
+#define INW_OFF(o)              readw_b2l((char __iomem *)np->reg + ncr_offw(o))
+#define INL_OFF(o)              readl_b2l((char __iomem *)np->reg + (o))
+
+#define OUTW_OFF(o, val)        writew_l2b((val), (char __iomem *)np->reg + ncr_offw(o))
+#define OUTL_OFF(o, val)        writel_l2b((val), (char __iomem *)np->reg + (o))
+
+#else
+
+#ifdef CONFIG_SCSI_NCR53C8XX_NO_WORD_TRANSFERS
+/* Only 8 or 32 bit transfers allowed */
+#define INW_OFF(o)              (readb((char __iomem *)np->reg + ncr_offw(o)) << 8 | readb((char __iomem *)np->reg + ncr_offw(o) + 1))
+#else
+#define INW_OFF(o)              readw_raw((char __iomem *)np->reg + ncr_offw(o))
+#endif
+#define INL_OFF(o)              readl_raw((char __iomem *)np->reg + (o))
+
+#ifdef CONFIG_SCSI_NCR53C8XX_NO_WORD_TRANSFERS
+/* Only 8 or 32 bit transfers allowed */
+#define OUTW_OFF(o, val)        do { writeb((char)((val) >> 8), (char __iomem *)np->reg + ncr_offw(o)); writeb((char)(val), (char __iomem *)np->reg + ncr_offw(o) + 1); } while (0)
+#else
+#define OUTW_OFF(o, val)        writew_raw((val), (char __iomem *)np->reg + ncr_offw(o))
+#endif
+#define OUTL_OFF(o, val)        writel_raw((val), (char __iomem *)np->reg + (o))
+
+#endif
+
+#define INB(r)          INB_OFF (offsetof(struct ncr_reg,r))
+#define INW(r)          INW_OFF (offsetof(struct ncr_reg,r))
+#define INL(r)          INL_OFF (offsetof(struct ncr_reg,r))
+
+#define OUTB(r, val)    OUTB_OFF (offsetof(struct ncr_reg,r), (val))
+#define OUTW(r, val)    OUTW_OFF (offsetof(struct ncr_reg,r), (val))
+#define OUTL(r, val)    OUTL_OFF (offsetof(struct ncr_reg,r), (val))
+
+/*
+ *  Set bit field ON, OFF 
+ */
+
+#define OUTONB(r, m)    OUTB(r, INB(r) | (m))
+#define OUTOFFB(r, m)   OUTB(r, INB(r) & ~(m))
+#define OUTONW(r, m)    OUTW(r, INW(r) | (m))
+#define OUTOFFW(r, m)   OUTW(r, INW(r) & ~(m))
+#define OUTONL(r, m)    OUTL(r, INL(r) | (m))
+#define OUTOFFL(r, m)   OUTL(r, INL(r) & ~(m))
+
+/*
+ *  We normally want the chip to have a consistent view
+ *  of driver internal data structures when we restart it.
+ *  Thus these macros.
+ */
+#define OUTL_DSP(v)                             \
+        do {                                    \
+                MEMORY_BARRIER();               \
+                OUTL (nc_dsp, (v));             \
+        } while (0)
+
+#define OUTONB_STD()                            \
+        do {                                    \
+                MEMORY_BARRIER();               \
+                OUTONB (nc_dcntl, (STD|NOCOM)); \
+        } while (0)
+
+
+/*
+**   NCR53C8XX devices features table.
+*/
+struct ncr_chip {
+        unsigned short  revision_id;
+        unsigned char   burst_max;      /* log-base-2 of max burst */
+        unsigned char   offset_max;
+        unsigned char   nr_divisor;
+        unsigned int    features;
+#define FE_LED0         (1<<0)
+#define FE_WIDE         (1<<1)    /* Wide data transfers */
+#define FE_ULTRA        (1<<2)    /* Ultra speed 20Mtrans/sec */
+#define FE_DBLR         (1<<4)    /* Clock doubler present */
+#define FE_QUAD         (1<<5)    /* Clock quadrupler present */
+#define FE_ERL          (1<<6)    /* Enable read line */
+#define FE_CLSE         (1<<7)    /* Cache line size enable */
+#define FE_WRIE         (1<<8)    /* Write & Invalidate enable */
+#define FE_ERMP         (1<<9)    /* Enable read multiple */
+#define FE_BOF          (1<<10)   /* Burst opcode fetch */
+#define FE_DFS          (1<<11)   /* DMA fifo size */
+#define FE_PFEN         (1<<12)   /* Prefetch enable */
+#define FE_LDSTR        (1<<13)   /* Load/Store supported */
+#define FE_RAM          (1<<14)   /* On chip RAM present */
+#define FE_VARCLK       (1<<15)   /* SCSI clock may vary */
+#define FE_RAM8K        (1<<16)   /* On chip RAM sized 8Kb */
+#define FE_64BIT        (1<<17)   /* Have a 64-bit PCI interface */
+#define FE_IO256        (1<<18)   /* Requires full 256 bytes in PCI space */
+#define FE_NOPM         (1<<19)   /* Scripts handles phase mismatch */
+#define FE_LEDC         (1<<20)   /* Hardware control of LED */
+#define FE_DIFF         (1<<21)   /* Support Differential SCSI */
+#define FE_66MHZ        (1<<23)   /* 66MHz PCI Support */
+#define FE_DAC          (1<<24)   /* Support DAC cycles (64 bit addressing) */
+#define FE_ISTAT1       (1<<25)   /* Have ISTAT1, MBOX0, MBOX1 registers */
+#define FE_DAC_IN_USE   (1<<26)   /* Platform does DAC cycles */
+#define FE_EHP          (1<<27)   /* 720: Even host parity */
+#define FE_MUX          (1<<28)   /* 720: Multiplexed bus */
+#define FE_EA           (1<<29)   /* 720: Enable Ack */
+
+#define FE_CACHE_SET    (FE_ERL|FE_CLSE|FE_WRIE|FE_ERMP)
+#define FE_SCSI_SET     (FE_WIDE|FE_ULTRA|FE_DBLR|FE_QUAD|F_CLK80)
+#define FE_SPECIAL_SET  (FE_CACHE_SET|FE_BOF|FE_DFS|FE_LDSTR|FE_PFEN|FE_RAM)
+};
+
+
+/*
+**      Driver setup structure.
+**
+**      This structure is initialized from linux config options.
+**      It can be overridden at boot-up by the boot command line.
+*/
+#define SCSI_NCR_MAX_EXCLUDES 8
+struct ncr_driver_setup {
+        u8      master_parity;
+        u8      scsi_parity;
+        u8      disconnection;
+        u8      special_features;
+        u8      force_sync_nego;
+        u8      reverse_probe;
+        u8      pci_fix_up;
+        u8      use_nvram;
+        u8      verbose;
+        u8      default_tags;
+        u16     default_sync;
+        u16     debug;
+        u8      burst_max;
+        u8      led_pin;
+        u8      max_wide;
+        u8      settle_delay;
+        u8      diff_support;
+        u8      irqm;
+        u8      bus_check;
+        u8      optimize;
+        u8      recovery;
+        u8      host_id;
+        u16     iarb;
+        u32     excludes[SCSI_NCR_MAX_EXCLUDES];
+        char    tag_ctrl[100];
+};
+
+/*
+**      Initial setup.
+**      Can be overriden at startup by a command line.
+*/
+#define SCSI_NCR_DRIVER_SETUP                   \
+{                                               \
+        SCSI_NCR_SETUP_MASTER_PARITY,           \
+        SCSI_NCR_SETUP_SCSI_PARITY,             \
+        SCSI_NCR_SETUP_DISCONNECTION,           \
+        SCSI_NCR_SETUP_SPECIAL_FEATURES,        \
+        SCSI_NCR_SETUP_FORCE_SYNC_NEGO,         \
+        0,                                      \
+        0,                                      \
+        1,                                      \
+        0,                                      \
+        SCSI_NCR_SETUP_DEFAULT_TAGS,            \
+        SCSI_NCR_SETUP_DEFAULT_SYNC,            \
+        0x00,                                   \
+        7,                                      \
+        0,                                      \
+        1,                                      \
+        SCSI_NCR_SETUP_SETTLE_TIME,             \
+        0,                                      \
+        0,                                      \
+        1,                                      \
+        0,                                      \
+        0,                                      \
+        255,                                    \
+        0x00                                    \
+}
+
+/*
+**      Boot fail safe setup.
+**      Override initial setup from boot command line:
+**      ncr53c8xx=safe:y
+*/
+#define SCSI_NCR_DRIVER_SAFE_SETUP              \
+{                                               \
+        0,                                      \
+        1,                                      \
+        0,                                      \
+        0,                                      \
+        0,                                      \
+        0,                                      \
+        0,                                      \
+        1,                                      \
+        2,                                      \
+        0,                                      \
+        255,                                    \
+        0x00,                                   \
+        255,                                    \
+        0,                                      \
+        0,                                      \
+        10,                                     \
+        1,                                      \
+        1,                                      \
+        1,                                      \
+        0,                                      \
+        0,                                      \
+        255                                     \
+}
+
+/**************** ORIGINAL CONTENT of ncrreg.h from FreeBSD ******************/
+
+/*-----------------------------------------------------------------
+**
+**      The ncr 53c810 register structure.
+**
+**-----------------------------------------------------------------
+*/
+
+struct ncr_reg {
+/*00*/  u8      nc_scntl0;    /* full arb., ena parity, par->ATN  */
+
+/*01*/  u8      nc_scntl1;    /* no reset                         */
+        #define   ISCON   0x10  /* connected to scsi                */
+        #define   CRST    0x08  /* force reset                      */
+        #define   IARB    0x02  /* immediate arbitration            */
+
+/*02*/  u8      nc_scntl2;    /* no disconnect expected           */
+        #define   SDU     0x80  /* cmd: disconnect will raise error */
+        #define   CHM     0x40  /* sta: chained mode                */
+        #define   WSS     0x08  /* sta: wide scsi send           [W]*/
+        #define   WSR     0x01  /* sta: wide scsi received       [W]*/
+
+/*03*/  u8      nc_scntl3;    /* cnf system clock dependent       */
+        #define   EWS     0x08  /* cmd: enable wide scsi         [W]*/
+        #define   ULTRA   0x80  /* cmd: ULTRA enable                */
+                                /* bits 0-2, 7 rsvd for C1010       */
+
+/*04*/  u8      nc_scid;        /* cnf host adapter scsi address    */
+        #define   RRE     0x40  /* r/w:e enable response to resel.  */
+        #define   SRE     0x20  /* r/w:e enable response to select  */
+
+/*05*/  u8      nc_sxfer;       /* ### Sync speed and count         */
+                                /* bits 6-7 rsvd for C1010          */
+
+/*06*/  u8      nc_sdid;        /* ### Destination-ID               */
+
+/*07*/  u8      nc_gpreg;       /* ??? IO-Pins                      */
+
+/*08*/  u8      nc_sfbr;        /* ### First byte in phase          */
+
+/*09*/  u8      nc_socl;
+        #define   CREQ    0x80  /* r/w: SCSI-REQ                    */
+        #define   CACK    0x40  /* r/w: SCSI-ACK                    */
+        #define   CBSY    0x20  /* r/w: SCSI-BSY                    */
+        #define   CSEL    0x10  /* r/w: SCSI-SEL                    */
+        #define   CATN    0x08  /* r/w: SCSI-ATN                    */
+        #define   CMSG    0x04  /* r/w: SCSI-MSG                    */
+        #define   CC_D    0x02  /* r/w: SCSI-C_D                    */
+        #define   CI_O    0x01  /* r/w: SCSI-I_O                    */
+
+/*0a*/  u8      nc_ssid;
+
+/*0b*/  u8      nc_sbcl;
+
+/*0c*/  u8      nc_dstat;
+        #define   DFE     0x80  /* sta: dma fifo empty              */
+        #define   MDPE    0x40  /* int: master data parity error    */
+        #define   BF      0x20  /* int: script: bus fault           */
+        #define   ABRT    0x10  /* int: script: command aborted     */
+        #define   SSI     0x08  /* int: script: single step         */
+        #define   SIR     0x04  /* int: script: interrupt instruct. */
+        #define   IID     0x01  /* int: script: illegal instruct.   */
+
+/*0d*/  u8      nc_sstat0;
+        #define   ILF     0x80  /* sta: data in SIDL register lsb   */
+        #define   ORF     0x40  /* sta: data in SODR register lsb   */
+        #define   OLF     0x20  /* sta: data in SODL register lsb   */
+        #define   AIP     0x10  /* sta: arbitration in progress     */
+        #define   LOA     0x08  /* sta: arbitration lost            */
+        #define   WOA     0x04  /* sta: arbitration won             */
+        #define   IRST    0x02  /* sta: scsi reset signal           */
+        #define   SDP     0x01  /* sta: scsi parity signal          */
+
+/*0e*/  u8      nc_sstat1;
+        #define   FF3210  0xf0  /* sta: bytes in the scsi fifo      */
+
+/*0f*/  u8      nc_sstat2;
+        #define   ILF1    0x80  /* sta: data in SIDL register msb[W]*/
+        #define   ORF1    0x40  /* sta: data in SODR register msb[W]*/
+        #define   OLF1    0x20  /* sta: data in SODL register msb[W]*/
+        #define   DM      0x04  /* sta: DIFFSENS mismatch (895/6 only) */
+        #define   LDSC    0x02  /* sta: disconnect & reconnect      */
+
+/*10*/  u8      nc_dsa; /* --> Base page                    */
+/*11*/  u8      nc_dsa1;
+/*12*/  u8      nc_dsa2;
+/*13*/  u8      nc_dsa3;
+
+/*14*/  u8      nc_istat;       /* --> Main Command and status      */
+        #define   CABRT   0x80  /* cmd: abort current operation     */
+        #define   SRST    0x40  /* mod: reset chip                  */
+        #define   SIGP    0x20  /* r/w: message from host to ncr    */
+        #define   SEM     0x10  /* r/w: message between host + ncr  */
+        #define   CON     0x08  /* sta: connected to scsi           */
+        #define   INTF    0x04  /* sta: int on the fly (reset by wr)*/
+        #define   SIP     0x02  /* sta: scsi-interrupt              */
+        #define   DIP     0x01  /* sta: host/script interrupt       */
+
+/*15*/  u8      nc_istat1;      /* 896 and later cores only */
+        #define   FLSH    0x04  /* sta: chip is flushing            */
+        #define   SRUN    0x02  /* sta: scripts are running         */
+        #define   SIRQD   0x01  /* r/w: disable INT pin             */
+
+/*16*/  u8      nc_mbox0;       /* 896 and later cores only */
+/*17*/  u8      nc_mbox1;       /* 896 and later cores only */
+
+/*18*/  u8      nc_ctest0;
+        #define   EHP     0x04  /* 720 even host parity             */
+/*19*/  u8      nc_ctest1;
+
+/*1a*/  u8      nc_ctest2;
+        #define   CSIGP   0x40
+                                /* bits 0-2,7 rsvd for C1010        */
+
+/*1b*/  u8      nc_ctest3;
+        #define   FLF     0x08  /* cmd: flush dma fifo              */
+        #define   CLF     0x04  /* cmd: clear dma fifo              */
+        #define   FM      0x02  /* mod: fetch pin mode              */
+        #define   WRIE    0x01  /* mod: write and invalidate enable */
+                                /* bits 4-7 rsvd for C1010          */
+
+/*1c*/  u32    nc_temp; /* ### Temporary stack              */
+
+/*20*/  u8      nc_dfifo;
+/*21*/  u8      nc_ctest4;
+        #define   MUX     0x80  /* 720 host bus multiplex mode      */
+        #define   BDIS    0x80  /* mod: burst disable               */
+        #define   MPEE    0x08  /* mod: master parity error enable  */
+
+/*22*/  u8      nc_ctest5;
+        #define   DFS     0x20  /* mod: dma fifo size               */
+                                /* bits 0-1, 3-7 rsvd for C1010          */
+/*23*/  u8      nc_ctest6;
+
+/*24*/  u32    nc_dbc;  /* ### Byte count and command       */
+/*28*/  u32    nc_dnad; /* ### Next command register        */
+/*2c*/  u32    nc_dsp;  /* --> Script Pointer               */
+/*30*/  u32    nc_dsps; /* --> Script pointer save/opcode#2 */
+
+/*34*/  u8      nc_scratcha;  /* Temporary register a            */
+/*35*/  u8      nc_scratcha1;
+/*36*/  u8      nc_scratcha2;
+/*37*/  u8      nc_scratcha3;
+
+/*38*/  u8      nc_dmode;
+        #define   BL_2    0x80  /* mod: burst length shift value +2 */
+        #define   BL_1    0x40  /* mod: burst length shift value +1 */
+        #define   ERL     0x08  /* mod: enable read line            */
+        #define   ERMP    0x04  /* mod: enable read multiple        */
+        #define   BOF     0x02  /* mod: burst op code fetch         */
+
+/*39*/  u8      nc_dien;
+/*3a*/  u8      nc_sbr;
+
+/*3b*/  u8      nc_dcntl;       /* --> Script execution control     */
+        #define   CLSE    0x80  /* mod: cache line size enable      */
+        #define   PFF     0x40  /* cmd: pre-fetch flush             */
+        #define   PFEN    0x20  /* mod: pre-fetch enable            */
+        #define   EA      0x20  /* mod: 720 enable-ack              */
+        #define   SSM     0x10  /* mod: single step mode            */
+        #define   IRQM    0x08  /* mod: irq mode (1 = totem pole !) */
+        #define   STD     0x04  /* cmd: start dma mode              */
+        #define   IRQD    0x02  /* mod: irq disable                 */
+        #define   NOCOM   0x01  /* cmd: protect sfbr while reselect */
+                                /* bits 0-1 rsvd for C1010          */
+
+/*3c*/  u32     nc_adder;
+
+/*40*/  u16     nc_sien;        /* -->: interrupt enable            */
+/*42*/  u16     nc_sist;        /* <--: interrupt status            */
+        #define   SBMC    0x1000/* sta: SCSI Bus Mode Change (895/6 only) */
+        #define   STO     0x0400/* sta: timeout (select)            */
+        #define   GEN     0x0200/* sta: timeout (general)           */
+        #define   HTH     0x0100/* sta: timeout (handshake)         */
+        #define   MA      0x80  /* sta: phase mismatch              */
+        #define   CMP     0x40  /* sta: arbitration complete        */
+        #define   SEL     0x20  /* sta: selected by another device  */
+        #define   RSL     0x10  /* sta: reselected by another device*/
+        #define   SGE     0x08  /* sta: gross error (over/underflow)*/
+        #define   UDC     0x04  /* sta: unexpected disconnect       */
+        #define   RST     0x02  /* sta: scsi bus reset detected     */
+        #define   PAR     0x01  /* sta: scsi parity error           */
+
+/*44*/  u8      nc_slpar;
+/*45*/  u8      nc_swide;
+/*46*/  u8      nc_macntl;
+/*47*/  u8      nc_gpcntl;
+/*48*/  u8      nc_stime0;    /* cmd: timeout for select&handshake*/
+/*49*/  u8      nc_stime1;    /* cmd: timeout user defined        */
+/*4a*/  u16   nc_respid;    /* sta: Reselect-IDs                */
+
+/*4c*/  u8      nc_stest0;
+
+/*4d*/  u8      nc_stest1;
+        #define   SCLK    0x80  /* Use the PCI clock as SCSI clock      */
+        #define   DBLEN   0x08  /* clock doubler running                */
+        #define   DBLSEL  0x04  /* clock doubler selected               */
+  
+
+/*4e*/  u8      nc_stest2;
+        #define   ROF     0x40  /* reset scsi offset (after gross error!) */
+        #define   DIF     0x20  /* 720 SCSI differential mode             */
+        #define   EXT     0x02  /* extended filtering                     */
+
+/*4f*/  u8      nc_stest3;
+        #define   TE     0x80   /* c: tolerAnt enable */
+        #define   HSC    0x20   /* c: Halt SCSI Clock */
+        #define   CSF    0x02   /* c: clear scsi fifo */
+
+/*50*/  u16   nc_sidl;  /* Lowlevel: latched from scsi data */
+/*52*/  u8      nc_stest4;
+        #define   SMODE  0xc0   /* SCSI bus mode      (895/6 only) */
+        #define    SMODE_HVD 0x40       /* High Voltage Differential       */
+        #define    SMODE_SE  0x80       /* Single Ended                    */
+        #define    SMODE_LVD 0xc0       /* Low Voltage Differential        */
+        #define   LCKFRQ 0x20   /* Frequency Lock (895/6 only)     */
+                                /* bits 0-5 rsvd for C1010          */
+
+/*53*/  u8      nc_53_;
+/*54*/  u16     nc_sodl;        /* Lowlevel: data out to scsi data  */
+/*56*/  u8      nc_ccntl0;      /* Chip Control 0 (896)             */
+        #define   ENPMJ  0x80   /* Enable Phase Mismatch Jump       */
+        #define   PMJCTL 0x40   /* Phase Mismatch Jump Control      */
+        #define   ENNDJ  0x20   /* Enable Non Data PM Jump          */
+        #define   DISFC  0x10   /* Disable Auto FIFO Clear          */
+        #define   DILS   0x02   /* Disable Internal Load/Store      */
+        #define   DPR    0x01   /* Disable Pipe Req                 */
+
+/*57*/  u8      nc_ccntl1;      /* Chip Control 1 (896)             */
+        #define   ZMOD   0x80   /* High Impedance Mode              */
+        #define   DIC    0x10   /* Disable Internal Cycles          */
+        #define   DDAC   0x08   /* Disable Dual Address Cycle       */
+        #define   XTIMOD 0x04   /* 64-bit Table Ind. Indexing Mode  */
+        #define   EXTIBMV 0x02  /* Enable 64-bit Table Ind. BMOV    */
+        #define   EXDBMV 0x01   /* Enable 64-bit Direct BMOV        */
+
+/*58*/  u16     nc_sbdl;        /* Lowlevel: data from scsi data    */
+/*5a*/  u16     nc_5a_;
+
+/*5c*/  u8      nc_scr0;        /* Working register B               */
+/*5d*/  u8      nc_scr1;        /*                                  */
+/*5e*/  u8      nc_scr2;        /*                                  */
+/*5f*/  u8      nc_scr3;        /*                                  */
+
+/*60*/  u8      nc_scrx[64];    /* Working register C-R             */
+/*a0*/  u32     nc_mmrs;        /* Memory Move Read Selector        */
+/*a4*/  u32     nc_mmws;        /* Memory Move Write Selector       */
+/*a8*/  u32     nc_sfs;         /* Script Fetch Selector            */
+/*ac*/  u32     nc_drs;         /* DSA Relative Selector            */
+/*b0*/  u32     nc_sbms;        /* Static Block Move Selector       */
+/*b4*/  u32     nc_dbms;        /* Dynamic Block Move Selector      */
+/*b8*/  u32     nc_dnad64;      /* DMA Next Address 64              */
+/*bc*/  u16     nc_scntl4;      /* C1010 only                       */
+        #define   U3EN   0x80   /* Enable Ultra 3                   */
+        #define   AIPEN  0x40   /* Allow check upper byte lanes     */
+        #define   XCLKH_DT 0x08 /* Extra clock of data hold on DT
+                                        transfer edge               */
+        #define   XCLKH_ST 0x04 /* Extra clock of data hold on ST
+                                        transfer edge               */
+
+/*be*/  u8      nc_aipcntl0;    /* Epat Control 1 C1010 only        */
+/*bf*/  u8      nc_aipcntl1;    /* AIP Control C1010_66 Only        */
+
+/*c0*/  u32     nc_pmjad1;      /* Phase Mismatch Jump Address 1    */
+/*c4*/  u32     nc_pmjad2;      /* Phase Mismatch Jump Address 2    */
+/*c8*/  u8      nc_rbc;         /* Remaining Byte Count             */
+/*c9*/  u8      nc_rbc1;        /*                                  */
+/*ca*/  u8      nc_rbc2;        /*                                  */
+/*cb*/  u8      nc_rbc3;        /*                                  */
+
+/*cc*/  u8      nc_ua;          /* Updated Address                  */
+/*cd*/  u8      nc_ua1;         /*                                  */
+/*ce*/  u8      nc_ua2;         /*                                  */
+/*cf*/  u8      nc_ua3;         /*                                  */
+/*d0*/  u32     nc_esa;         /* Entry Storage Address            */
+/*d4*/  u8      nc_ia;          /* Instruction Address              */
+/*d5*/  u8      nc_ia1;
+/*d6*/  u8      nc_ia2;
+/*d7*/  u8      nc_ia3;
+/*d8*/  u32     nc_sbc;         /* SCSI Byte Count (3 bytes only)   */
+/*dc*/  u32     nc_csbc;        /* Cumulative SCSI Byte Count       */
+
+                                /* Following for C1010 only         */
+/*e0*/  u16     nc_crcpad;      /* CRC Value                        */
+/*e2*/  u8      nc_crccntl0;    /* CRC control register             */
+        #define   SNDCRC  0x10  /* Send CRC Request                 */
+/*e3*/  u8      nc_crccntl1;    /* CRC control register             */
+/*e4*/  u32     nc_crcdata;     /* CRC data register                */ 
+/*e8*/  u32     nc_e8_;         /* rsvd                             */
+/*ec*/  u32     nc_ec_;         /* rsvd                             */
+/*f0*/  u16     nc_dfbc;        /* DMA FIFO byte count              */ 
+
+};
+
+/*-----------------------------------------------------------
+**
+**      Utility macros for the script.
+**
+**-----------------------------------------------------------
+*/
+
+#define REGJ(p,r) (offsetof(struct ncr_reg, p ## r))
+#define REG(r) REGJ (nc_, r)
+
+typedef u32 ncrcmd;
+
+/*-----------------------------------------------------------
+**
+**      SCSI phases
+**
+**      DT phases illegal for ncr driver.
+**
+**-----------------------------------------------------------
+*/
+
+#define SCR_DATA_OUT    0x00000000
+#define SCR_DATA_IN     0x01000000
+#define SCR_COMMAND     0x02000000
+#define SCR_STATUS      0x03000000
+#define SCR_DT_DATA_OUT 0x04000000
+#define SCR_DT_DATA_IN  0x05000000
+#define SCR_MSG_OUT     0x06000000
+#define SCR_MSG_IN      0x07000000
+
+#define SCR_ILG_OUT     0x04000000
+#define SCR_ILG_IN      0x05000000
+
+/*-----------------------------------------------------------
+**
+**      Data transfer via SCSI.
+**
+**-----------------------------------------------------------
+**
+**      MOVE_ABS (LEN)
+**      <<start address>>
+**
+**      MOVE_IND (LEN)
+**      <<dnad_offset>>
+**
+**      MOVE_TBL
+**      <<dnad_offset>>
+**
+**-----------------------------------------------------------
+*/
+
+#define OPC_MOVE          0x08000000
+
+#define SCR_MOVE_ABS(l) ((0x00000000 | OPC_MOVE) | (l))
+#define SCR_MOVE_IND(l) ((0x20000000 | OPC_MOVE) | (l))
+#define SCR_MOVE_TBL     (0x10000000 | OPC_MOVE)
+
+#define SCR_CHMOV_ABS(l) ((0x00000000) | (l))
+#define SCR_CHMOV_IND(l) ((0x20000000) | (l))
+#define SCR_CHMOV_TBL     (0x10000000)
+
+struct scr_tblmove {
+        u32  size;
+        u32  addr;
+};
+
+/*-----------------------------------------------------------
+**
+**      Selection
+**
+**-----------------------------------------------------------
+**
+**      SEL_ABS | SCR_ID (0..15)    [ | REL_JMP]
+**      <<alternate_address>>
+**
+**      SEL_TBL | << dnad_offset>>  [ | REL_JMP]
+**      <<alternate_address>>
+**
+**-----------------------------------------------------------
+*/
+
+#define SCR_SEL_ABS     0x40000000
+#define SCR_SEL_ABS_ATN 0x41000000
+#define SCR_SEL_TBL     0x42000000
+#define SCR_SEL_TBL_ATN 0x43000000
+
+
+#ifdef SCSI_NCR_BIG_ENDIAN
+struct scr_tblsel {
+        u8      sel_scntl3;
+        u8      sel_id;
+        u8      sel_sxfer;
+        u8      sel_scntl4;     
+};
+#else
+struct scr_tblsel {
+        u8      sel_scntl4;     
+        u8      sel_sxfer;
+        u8      sel_id;
+        u8      sel_scntl3;
+};
+#endif
+
+#define SCR_JMP_REL     0x04000000
+#define SCR_ID(id)      (((u32)(id)) << 16)
+
+/*-----------------------------------------------------------
+**
+**      Waiting for Disconnect or Reselect
+**
+**-----------------------------------------------------------
+**
+**      WAIT_DISC
+**      dummy: <<alternate_address>>
+**
+**      WAIT_RESEL
+**      <<alternate_address>>
+**
+**-----------------------------------------------------------
+*/
+
+#define SCR_WAIT_DISC   0x48000000
+#define SCR_WAIT_RESEL  0x50000000
+
+/*-----------------------------------------------------------
+**
+**      Bit Set / Reset
+**
+**-----------------------------------------------------------
+**
+**      SET (flags {|.. })
+**
+**      CLR (flags {|.. })
+**
+**-----------------------------------------------------------
+*/
+
+#define SCR_SET(f)     (0x58000000 | (f))
+#define SCR_CLR(f)     (0x60000000 | (f))
+
+#define SCR_CARRY       0x00000400
+#define SCR_TRG         0x00000200
+#define SCR_ACK         0x00000040
+#define SCR_ATN         0x00000008
+
+
+
+
+/*-----------------------------------------------------------
+**
+**      Memory to memory move
+**
+**-----------------------------------------------------------
+**
+**      COPY (bytecount)
+**      << source_address >>
+**      << destination_address >>
+**
+**      SCR_COPY   sets the NO FLUSH option by default.
+**      SCR_COPY_F does not set this option.
+**
+**      For chips which do not support this option,
+**      ncr_copy_and_bind() will remove this bit.
+**-----------------------------------------------------------
+*/
+
+#define SCR_NO_FLUSH 0x01000000
+
+#define SCR_COPY(n) (0xc0000000 | SCR_NO_FLUSH | (n))
+#define SCR_COPY_F(n) (0xc0000000 | (n))
+
+/*-----------------------------------------------------------
+**
+**      Register move and binary operations
+**
+**-----------------------------------------------------------
+**
+**      SFBR_REG (reg, op, data)        reg  = SFBR op data
+**      << 0 >>
+**
+**      REG_SFBR (reg, op, data)        SFBR = reg op data
+**      << 0 >>
+**
+**      REG_REG  (reg, op, data)        reg  = reg op data
+**      << 0 >>
+**
+**-----------------------------------------------------------
+**      On 810A, 860, 825A, 875, 895 and 896 chips the content 
+**      of SFBR register can be used as data (SCR_SFBR_DATA).
+**      The 896 has additionnal IO registers starting at 
+**      offset 0x80. Bit 7 of register offset is stored in 
+**      bit 7 of the SCRIPTS instruction first DWORD.
+**-----------------------------------------------------------
+*/
+
+#define SCR_REG_OFS(ofs) ((((ofs) & 0x7f) << 16ul) + ((ofs) & 0x80)) 
+
+#define SCR_SFBR_REG(reg,op,data) \
+        (0x68000000 | (SCR_REG_OFS(REG(reg))) | (op) | (((data)&0xff)<<8ul))
+
+#define SCR_REG_SFBR(reg,op,data) \
+        (0x70000000 | (SCR_REG_OFS(REG(reg))) | (op) | (((data)&0xff)<<8ul))
+
+#define SCR_REG_REG(reg,op,data) \
+        (0x78000000 | (SCR_REG_OFS(REG(reg))) | (op) | (((data)&0xff)<<8ul))
+
+
+#define      SCR_LOAD   0x00000000
+#define      SCR_SHL    0x01000000
+#define      SCR_OR     0x02000000
+#define      SCR_XOR    0x03000000
+#define      SCR_AND    0x04000000
+#define      SCR_SHR    0x05000000
+#define      SCR_ADD    0x06000000
+#define      SCR_ADDC   0x07000000
+
+#define      SCR_SFBR_DATA   (0x00800000>>8ul)  /* Use SFBR as data */
+
+/*-----------------------------------------------------------
+**
+**      FROM_REG (reg)            SFBR = reg
+**      << 0 >>
+**
+**      TO_REG   (reg)            reg  = SFBR
+**      << 0 >>
+**
+**      LOAD_REG (reg, data)      reg  = <data>
+**      << 0 >>
+**
+**      LOAD_SFBR(data)           SFBR = <data>
+**      << 0 >>
+**
+**-----------------------------------------------------------
+*/
+
+#define SCR_FROM_REG(reg) \
+        SCR_REG_SFBR(reg,SCR_OR,0)
+
+#define SCR_TO_REG(reg) \
+        SCR_SFBR_REG(reg,SCR_OR,0)
+
+#define SCR_LOAD_REG(reg,data) \
+        SCR_REG_REG(reg,SCR_LOAD,data)
+
+#define SCR_LOAD_SFBR(data) \
+        (SCR_REG_SFBR (gpreg, SCR_LOAD, data))
+
+/*-----------------------------------------------------------
+**
+**      LOAD  from memory   to register.
+**      STORE from register to memory.
+**
+**      Only supported by 810A, 860, 825A, 875, 895 and 896.
+**
+**-----------------------------------------------------------
+**
+**      LOAD_ABS (LEN)
+**      <<start address>>
+**
+**      LOAD_REL (LEN)        (DSA relative)
+**      <<dsa_offset>>
+**
+**-----------------------------------------------------------
+*/
+
+#define SCR_REG_OFS2(ofs) (((ofs) & 0xff) << 16ul)
+#define SCR_NO_FLUSH2   0x02000000
+#define SCR_DSA_REL2    0x10000000
+
+#define SCR_LOAD_R(reg, how, n) \
+        (0xe1000000 | how | (SCR_REG_OFS2(REG(reg))) | (n))
+
+#define SCR_STORE_R(reg, how, n) \
+        (0xe0000000 | how | (SCR_REG_OFS2(REG(reg))) | (n))
+
+#define SCR_LOAD_ABS(reg, n)    SCR_LOAD_R(reg, SCR_NO_FLUSH2, n)
+#define SCR_LOAD_REL(reg, n)    SCR_LOAD_R(reg, SCR_NO_FLUSH2|SCR_DSA_REL2, n)
+#define SCR_LOAD_ABS_F(reg, n)  SCR_LOAD_R(reg, 0, n)
+#define SCR_LOAD_REL_F(reg, n)  SCR_LOAD_R(reg, SCR_DSA_REL2, n)
+
+#define SCR_STORE_ABS(reg, n)   SCR_STORE_R(reg, SCR_NO_FLUSH2, n)
+#define SCR_STORE_REL(reg, n)   SCR_STORE_R(reg, SCR_NO_FLUSH2|SCR_DSA_REL2,n)
+#define SCR_STORE_ABS_F(reg, n) SCR_STORE_R(reg, 0, n)
+#define SCR_STORE_REL_F(reg, n) SCR_STORE_R(reg, SCR_DSA_REL2, n)
+
+
+/*-----------------------------------------------------------
+**
+**      Waiting for Disconnect or Reselect
+**
+**-----------------------------------------------------------
+**
+**      JUMP            [ | IFTRUE/IFFALSE ( ... ) ]
+**      <<address>>
+**
+**      JUMPR           [ | IFTRUE/IFFALSE ( ... ) ]
+**      <<distance>>
+**
+**      CALL            [ | IFTRUE/IFFALSE ( ... ) ]
+**      <<address>>
+**
+**      CALLR           [ | IFTRUE/IFFALSE ( ... ) ]
+**      <<distance>>
+**
+**      RETURN          [ | IFTRUE/IFFALSE ( ... ) ]
+**      <<dummy>>
+**
+**      INT             [ | IFTRUE/IFFALSE ( ... ) ]
+**      <<ident>>
+**
+**      INT_FLY         [ | IFTRUE/IFFALSE ( ... ) ]
+**      <<ident>>
+**
+**      Conditions:
+**           WHEN (phase)
+**           IF   (phase)
+**           CARRYSET
+**           DATA (data, mask)
+**
+**-----------------------------------------------------------
+*/
+
+#define SCR_NO_OP       0x80000000
+#define SCR_JUMP        0x80080000
+#define SCR_JUMP64      0x80480000
+#define SCR_JUMPR       0x80880000
+#define SCR_CALL        0x88080000
+#define SCR_CALLR       0x88880000
+#define SCR_RETURN      0x90080000
+#define SCR_INT         0x98080000
+#define SCR_INT_FLY     0x98180000
+
+#define IFFALSE(arg)   (0x00080000 | (arg))
+#define IFTRUE(arg)    (0x00000000 | (arg))
+
+#define WHEN(phase)    (0x00030000 | (phase))
+#define IF(phase)      (0x00020000 | (phase))
+
+#define DATA(D)        (0x00040000 | ((D) & 0xff))
+#define MASK(D,M)      (0x00040000 | (((M ^ 0xff) & 0xff) << 8ul)|((D) & 0xff))
+
+#define CARRYSET       (0x00200000)
+
+/*-----------------------------------------------------------
+**
+**      SCSI  constants.
+**
+**-----------------------------------------------------------
+*/
+
+/*
+**      Messages
+*/
+
+#define M_COMPLETE      COMMAND_COMPLETE
+#define M_EXTENDED      EXTENDED_MESSAGE
+#define M_SAVE_DP       SAVE_POINTERS
+#define M_RESTORE_DP    RESTORE_POINTERS
+#define M_DISCONNECT    DISCONNECT
+#define M_ID_ERROR      INITIATOR_ERROR
+#define M_ABORT         ABORT_TASK_SET
+#define M_REJECT        MESSAGE_REJECT
+#define M_NOOP          NOP
+#define M_PARITY        MSG_PARITY_ERROR
+#define M_LCOMPLETE     LINKED_CMD_COMPLETE
+#define M_FCOMPLETE     LINKED_FLG_CMD_COMPLETE
+#define M_RESET         TARGET_RESET
+#define M_ABORT_TAG     ABORT_TASK
+#define M_CLEAR_QUEUE   CLEAR_TASK_SET
+#define M_INIT_REC      INITIATE_RECOVERY
+#define M_REL_REC       RELEASE_RECOVERY
+#define M_TERMINATE     (0x11)
+#define M_SIMPLE_TAG    SIMPLE_QUEUE_TAG
+#define M_HEAD_TAG      HEAD_OF_QUEUE_TAG
+#define M_ORDERED_TAG   ORDERED_QUEUE_TAG
+#define M_IGN_RESIDUE   IGNORE_WIDE_RESIDUE
+#define M_IDENTIFY      (0x80)
+
+#define M_X_MODIFY_DP   EXTENDED_MODIFY_DATA_POINTER
+#define M_X_SYNC_REQ    EXTENDED_SDTR
+#define M_X_WIDE_REQ    EXTENDED_WDTR
+#define M_X_PPR_REQ     EXTENDED_PPR
+
+/*
+**      Status
+*/
+
+#define S_GOOD          (0x00)
+#define S_CHECK_COND    (0x02)
+#define S_COND_MET      (0x04)
+#define S_BUSY          (0x08)
+#define S_INT           (0x10)
+#define S_INT_COND_MET  (0x14)
+#define S_CONFLICT      (0x18)
+#define S_TERMINATED    (0x20)
+#define S_QUEUE_FULL    (0x28)
+#define S_ILLEGAL       (0xff)
+#define S_SENSE         (0x80)
+
+/*
+ * End of ncrreg from FreeBSD
+ */
+
+#endif /* defined SYM53C8XX_DEFS_H */