Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (166 commits)
  [SCSI] ibmvscsi: convert to use the data buffer accessors
  [SCSI] dc395x: convert to use the data buffer accessors
  [SCSI] ncr53c8xx: convert to use the data buffer accessors
  [SCSI] sym53c8xx: convert to use the data buffer accessors
  [SCSI] ppa: coding police and printk levels
  [SCSI] aic7xxx_old: remove redundant GFP_ATOMIC from kmalloc
  [SCSI] i2o: remove redundant GFP_ATOMIC from kmalloc from device.c
  [SCSI] remove the dead CYBERSTORMIII_SCSI option
  [SCSI] don't build scsi_dma_{map,unmap} for !HAS_DMA
  [SCSI] Clean up scsi_add_lun a bit
  [SCSI] 53c700: Remove printk, which triggers because of low scsi clock on SNI RMs
  [SCSI] sni_53c710: Cleanup
  [SCSI] qla4xxx: Fix underrun/overrun conditions
  [SCSI] megaraid_mbox: use mutex instead of semaphore
  [SCSI] aacraid: add 51245, 51645 and 52245 adapters to documentation.
  [SCSI] qla2xxx: update version to 8.02.00-k1.
  [SCSI] qla2xxx: add support for NPIV
  [SCSI] stex: use resid for xfer len information
  [SCSI] Add Brownie 1200U3P to blacklist
  [SCSI] scsi.c: convert to use the data buffer accessors
  ...

1 files changed, 28 insertions, 39 deletions

diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 662577fbe7a8..a86e62f4b3ba 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -703,16 +703,14 @@ static int scsi_probe_lun(struct scsi_device *sdev, unsigned char *inq_result,
 
 /**
  * scsi_add_lun - allocate and fully initialze a scsi_device
- * @sdevscan:   holds information to be stored in the new scsi_device
- * @sdevnew:    store the address of the newly allocated scsi_device
+ * @sdev:       holds information to be stored in the new scsi_device
  * @inq_result: holds the result of a previous INQUIRY to the LUN
  * @bflags:     black/white list flag
+ * @async:      1 if this device is being scanned asynchronously
  *
  * Description:
- *     Allocate and initialize a scsi_device matching sdevscan. Optionally
- *     set fields based on values in *@bflags. If @sdevnew is not
- *     NULL, store the address of the new scsi_device in *@sdevnew (needed
- *     when scanning a particular LUN).
+ *     Initialize the scsi_device @sdev.  Optionally set fields based
+ *     on values in *@bflags.
  *
  * Return:
  *     SCSI_SCAN_NO_RESPONSE: could not allocate or setup a scsi_device
@@ -752,25 +750,15 @@ static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result,
         sdev->rev = (char *) (sdev->inquiry + 32);
 
         if (*bflags & BLIST_ISROM) {
-                /*
-                 * It would be better to modify sdev->type, and set
-                 * sdev->removable; this can now be done since
-                 * print_inquiry has gone away.
-                 */
-                inq_result[0] = TYPE_ROM;
-                inq_result[1] |= 0x80;  /* removable */
-        } else if (*bflags & BLIST_NO_ULD_ATTACH)
-                sdev->no_uld_attach = 1;
+                sdev->type = TYPE_ROM;
+                sdev->removable = 1;
+        } else {
+                sdev->type = (inq_result[0] & 0x1f);
+                sdev->removable = (inq_result[1] & 0x80) >> 7;
+        }
 
-        switch (sdev->type = (inq_result[0] & 0x1f)) {
+        switch (sdev->type) {
         case TYPE_RBC:
-                /* RBC devices can return SCSI-3 compliance and yet
-                 * still not support REPORT LUNS, so make them act as
-                 * BLIST_NOREPORTLUN unless BLIST_REPORTLUN2 is
-                 * specifically set */
-                if ((*bflags & BLIST_REPORTLUN2) == 0)
-                        *bflags |= BLIST_NOREPORTLUN;
-                /* fall through */
         case TYPE_TAPE:
         case TYPE_DISK:
         case TYPE_PRINTER:
@@ -784,13 +772,6 @@ static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result,
                 sdev->writeable = 1;
                 break;
         case TYPE_ROM:
-                /* MMC devices can return SCSI-3 compliance and yet
-                 * still not support REPORT LUNS, so make them act as
-                 * BLIST_NOREPORTLUN unless BLIST_REPORTLUN2 is
-                 * specifically set */
-                if ((*bflags & BLIST_REPORTLUN2) == 0)
-                        *bflags |= BLIST_NOREPORTLUN;
-                /* fall through */
         case TYPE_WORM:
                 sdev->writeable = 0;
                 break;
@@ -798,6 +779,15 @@ static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result,
                 printk(KERN_INFO "scsi: unknown device type %d\n", sdev->type);
         }
 
+        if (sdev->type == TYPE_RBC || sdev->type == TYPE_ROM) {
+                /* RBC and MMC devices can return SCSI-3 compliance and yet
+                 * still not support REPORT LUNS, so make them act as
+                 * BLIST_NOREPORTLUN unless BLIST_REPORTLUN2 is
+                 * specifically set */
+                if ((*bflags & BLIST_REPORTLUN2) == 0)
+                        *bflags |= BLIST_NOREPORTLUN;
+        }
+
         /*
          * For a peripheral qualifier (PQ) value of 1 (001b), the SCSI
          * spec says: The device server is capable of supporting the
@@ -815,12 +805,11 @@ static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result,
          */ 
 
         sdev->inq_periph_qual = (inq_result[0] >> 5) & 7;
-        sdev->removable = (0x80 & inq_result[1]) >> 7;
         sdev->lockable = sdev->removable;
         sdev->soft_reset = (inq_result[7] & 1) && ((inq_result[3] & 7) == 2);
 
-        if (sdev->scsi_level >= SCSI_3 || (sdev->inquiry_len > 56 &&
-                inq_result[56] & 0x04))
+        if (sdev->scsi_level >= SCSI_3 ||
+                        (sdev->inquiry_len > 56 && inq_result[56] & 0x04))
                 sdev->ppr = 1;
         if (inq_result[7] & 0x60)
                 sdev->wdtr = 1;
@@ -833,13 +822,10 @@ static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result,
                         sdev->inq_periph_qual, inq_result[2] & 0x07,
                         (inq_result[3] & 0x0f) == 1 ? " CCS" : "");
 
-        /*
-         * End sysfs code.
-         */
-
         if ((sdev->scsi_level >= SCSI_2) && (inq_result[7] & 2) &&
             !(*bflags & BLIST_NOTQ))
                 sdev->tagged_supported = 1;
+
         /*
          * Some devices (Texel CD ROM drives) have handshaking problems
          * when used with the Seagate controllers. borken is initialized
@@ -848,6 +834,9 @@ static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result,
         if ((*bflags & BLIST_BORKEN) == 0)
                 sdev->borken = 0;
 
+        if (*bflags & BLIST_NO_ULD_ATTACH)
+                sdev->no_uld_attach = 1;
+
         /*
          * Apparently some really broken devices (contrary to the SCSI
          * standards) need to be selected without asserting ATN
@@ -872,7 +861,6 @@ static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result,
         if (*bflags & BLIST_SINGLELUN)
                 sdev->single_lun = 1;
 
-
         sdev->use_10_for_rw = 1;
 
         if (*bflags & BLIST_MS_SKIP_PAGE_08)
@@ -1213,7 +1201,7 @@ static void scsi_sequential_lun_scan(struct scsi_target *starget,
  *     Given a struct scsi_lun of: 0a 04 0b 03 00 00 00 00, this function returns
  *     the integer: 0x0b030a04
  **/
-static int scsilun_to_int(struct scsi_lun *scsilun)
+int scsilun_to_int(struct scsi_lun *scsilun)
 {
         int i;
         unsigned int lun;
@@ -1224,6 +1212,7 @@ static int scsilun_to_int(struct scsi_lun *scsilun)
                               scsilun->scsi_lun[i + 1]) << (i * 8));
         return lun;
 }
+EXPORT_SYMBOL(scsilun_to_int);
 
 /**
  * int_to_scsilun: reverts an int into a scsi_lun