[libata] sata_vsc: fix inconsistent NULL checking

Also, cleanup interrupt mask content and note in Kconfig that this
driver supports the Intel 31244.

Signed-off-by: Jeff Garzik <jeff@garzik.org>

1 files changed, 30 insertions, 21 deletions

diff --git a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c
index b574379a7a82..b7b6c807346d 100644
--- a/drivers/scsi/sata_vsc.c
+++ b/drivers/scsi/sata_vsc.c
@@ -82,17 +82,20 @@
 #define VSC_SATA_PORT_OFFSET            0x200
 
 /* Error interrupt status bit offsets */
-#define VSC_SATA_INT_ERROR_E_OFFSET     2
-#define VSC_SATA_INT_ERROR_P_OFFSET     4
-#define VSC_SATA_INT_ERROR_T_OFFSET     5
-#define VSC_SATA_INT_ERROR_M_OFFSET     1
+#define VSC_SATA_INT_ERROR_CRC          0x40
+#define VSC_SATA_INT_ERROR_T            0x20
+#define VSC_SATA_INT_ERROR_P            0x10
+#define VSC_SATA_INT_ERROR_R            0x8
+#define VSC_SATA_INT_ERROR_E            0x4
+#define VSC_SATA_INT_ERROR_M            0x2
+#define VSC_SATA_INT_PHY_CHANGE 0x1
+#define VSC_SATA_INT_ERROR (VSC_SATA_INT_ERROR_CRC  | VSC_SATA_INT_ERROR_T | \
+                             VSC_SATA_INT_ERROR_P    | VSC_SATA_INT_ERROR_R | \
+                             VSC_SATA_INT_ERROR_E    | VSC_SATA_INT_ERROR_M | \
+                             VSC_SATA_INT_PHY_CHANGE)
+
 #define is_vsc_sata_int_err(port_idx, int_status) \
-         (int_status & ((1 << (VSC_SATA_INT_ERROR_E_OFFSET + (8 * port_idx))) | \
-                        (1 << (VSC_SATA_INT_ERROR_P_OFFSET + (8 * port_idx))) | \
-                        (1 << (VSC_SATA_INT_ERROR_T_OFFSET + (8 * port_idx))) | \
-                        (1 << (VSC_SATA_INT_ERROR_M_OFFSET + (8 * port_idx)))   \
-                       )\
-         )
+         (int_status & (VSC_SATA_INT_ERROR << (8 * port_idx)))
 
 
 static u32 vsc_sata_scr_read (struct ata_port *ap, unsigned int sc_reg)
@@ -215,14 +218,6 @@ static irqreturn_t vsc_sata_interrupt (int irq, void *dev_instance,
 
                         ap = host_set->ports[i];
 
-                        if (is_vsc_sata_int_err(i, int_status)) {
-                                u32 err_status;
-                                printk(KERN_DEBUG "%s: ignoring interrupt(s)\n", __FUNCTION__);
-                                err_status = ap ? vsc_sata_scr_read(ap, SCR_ERROR) : 0;
-                                vsc_sata_scr_write(ap, SCR_ERROR, err_status);
-                                handled++;
-                        }
-
                         if (ap && !(ap->flags &
                                     (ATA_FLAG_PORT_DISABLED|ATA_FLAG_NOINTR))) {
                                 struct ata_queued_cmd *qc;
@@ -230,12 +225,26 @@ static irqreturn_t vsc_sata_interrupt (int irq, void *dev_instance,
                                 qc = ata_qc_from_tag(ap, ap->active_tag);
                                 if (qc && (!(qc->tf.ctl & ATA_NIEN))) {
                                         handled += ata_host_intr(ap, qc);
-                                } else {
-                                        printk(KERN_DEBUG "%s: ignoring interrupt(s)\n", __FUNCTION__);
+                                } else if (is_vsc_sata_int_err(i, int_status)) {
+                                        /*
+                                         * On some chips (i.e. Intel 31244), an error 
+                                         * interrupt will sneak in at initialization
+                                         * time (phy state changes).  Clearing the SCR
+                                         * error register is not required, but it prevents
+                                         * the phy state change interrupts from recurring 
+                                         * later.
+                                         */
+                                        u32 err_status;
+                                        err_status = vsc_sata_scr_read(ap, SCR_ERROR);
+                                        printk(KERN_DEBUG "%s: clearing interrupt, "
+                                               "status %x; sata err status %x\n",
+                                               __FUNCTION__,
+                                               int_status, err_status);
+                                        vsc_sata_scr_write(ap, SCR_ERROR, err_status);
+                                        /* Clear interrupt status */
                                         ata_chk_status(ap);
                                         handled++;
                                 }
-
                         }
                 }
         }