Merge ../linux-2.6 by hand

1 files changed, 23 insertions, 19 deletions

diff --git a/drivers/scsi/sata_via.c b/drivers/scsi/sata_via.c
index 128b996b07b7..b3ecdbe400e9 100644
--- a/drivers/scsi/sata_via.c
+++ b/drivers/scsi/sata_via.c
@@ -41,6 +41,7 @@
 #include <linux/init.h>
 #include <linux/blkdev.h>
 #include <linux/delay.h>
+#include <linux/device.h>
 #include "scsi.h"
 #include <scsi/scsi_host.h>
 #include <linux/libata.h>
@@ -109,7 +110,7 @@ static Scsi_Host_Template svia_sht = {
         .ordered_flush          = 1,
 };
 
-static struct ata_port_operations svia_sata_ops = {
+static const struct ata_port_operations svia_sata_ops = {
         .port_disable           = ata_port_disable,
 
         .tf_load                = ata_tf_load,
@@ -212,7 +213,7 @@ static struct ata_probe_ent *vt6420_init_probe_ent(struct pci_dev *pdev)
         struct ata_probe_ent *probe_ent;
         struct ata_port_info *ppi = &svia_port_info;
 
-        probe_ent = ata_pci_init_native_mode(pdev, &ppi);
+        probe_ent = ata_pci_init_native_mode(pdev, &ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
         if (!probe_ent)
                 return NULL;
 
@@ -259,15 +260,15 @@ static void svia_configure(struct pci_dev *pdev)
         u8 tmp8;
 
         pci_read_config_byte(pdev, PCI_INTERRUPT_LINE, &tmp8);
-        printk(KERN_INFO DRV_NAME "(%s): routed to hard irq line %d\n",
-               pci_name(pdev),
+        dev_printk(KERN_INFO, &pdev->dev, "routed to hard irq line %d\n",
                (int) (tmp8 & 0xf0) == 0xf0 ? 0 : tmp8 & 0x0f);
 
         /* make sure SATA channels are enabled */
         pci_read_config_byte(pdev, SATA_CHAN_ENAB, &tmp8);
         if ((tmp8 & ALL_PORTS) != ALL_PORTS) {
-                printk(KERN_DEBUG DRV_NAME "(%s): enabling SATA channels (0x%x)\n",
-                       pci_name(pdev), (int) tmp8);
+                dev_printk(KERN_DEBUG, &pdev->dev,
+                           "enabling SATA channels (0x%x)\n",
+                           (int) tmp8);
                 tmp8 |= ALL_PORTS;
                 pci_write_config_byte(pdev, SATA_CHAN_ENAB, tmp8);
         }
@@ -275,8 +276,9 @@ static void svia_configure(struct pci_dev *pdev)
         /* make sure interrupts for each channel sent to us */
         pci_read_config_byte(pdev, SATA_INT_GATE, &tmp8);
         if ((tmp8 & ALL_PORTS) != ALL_PORTS) {
-                printk(KERN_DEBUG DRV_NAME "(%s): enabling SATA channel interrupts (0x%x)\n",
-                       pci_name(pdev), (int) tmp8);
+                dev_printk(KERN_DEBUG, &pdev->dev,
+                           "enabling SATA channel interrupts (0x%x)\n",
+                           (int) tmp8);
                 tmp8 |= ALL_PORTS;
                 pci_write_config_byte(pdev, SATA_INT_GATE, tmp8);
         }
@@ -284,8 +286,9 @@ static void svia_configure(struct pci_dev *pdev)
         /* make sure native mode is enabled */
         pci_read_config_byte(pdev, SATA_NATIVE_MODE, &tmp8);
         if ((tmp8 & NATIVE_MODE_ALL) != NATIVE_MODE_ALL) {
-                printk(KERN_DEBUG DRV_NAME "(%s): enabling SATA channel native mode (0x%x)\n",
-                       pci_name(pdev), (int) tmp8);
+                dev_printk(KERN_DEBUG, &pdev->dev,
+                           "enabling SATA channel native mode (0x%x)\n",
+                           (int) tmp8);
                 tmp8 |= NATIVE_MODE_ALL;
                 pci_write_config_byte(pdev, SATA_NATIVE_MODE, tmp8);
         }
@@ -303,7 +306,7 @@ static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
         u8 tmp8;
 
         if (!printed_version++)
-                printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
+                dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
 
         rc = pci_enable_device(pdev);
         if (rc)
@@ -318,8 +321,9 @@ static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
         if (board_id == vt6420) {
                 pci_read_config_byte(pdev, SATA_PATA_SHARING, &tmp8);
                 if (tmp8 & SATA_2DEV) {
-                        printk(KERN_ERR DRV_NAME "(%s): SATA master/slave not supported (0x%x)\n",
-                        pci_name(pdev), (int) tmp8);
+                        dev_printk(KERN_ERR, &pdev->dev,
+                                   "SATA master/slave not supported (0x%x)\n",
+                                   (int) tmp8);
                         rc = -EIO;
                         goto err_out_regions;
                 }
@@ -332,10 +336,11 @@ static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
         for (i = 0; i < ARRAY_SIZE(svia_bar_sizes); i++)
                 if ((pci_resource_start(pdev, i) == 0) ||
                     (pci_resource_len(pdev, i) < bar_sizes[i])) {
-                        printk(KERN_ERR DRV_NAME "(%s): invalid PCI BAR %u (sz 0x%lx, val 0x%lx)\n",
-                               pci_name(pdev), i,
-                               pci_resource_start(pdev, i),
-                               pci_resource_len(pdev, i));
+                        dev_printk(KERN_ERR, &pdev->dev,
+                                   "invalid PCI BAR %u (sz 0x%lx, val 0x%lx)\n",
+                                   i,
+                                   pci_resource_start(pdev, i),
+                                   pci_resource_len(pdev, i));
                         rc = -ENODEV;
                         goto err_out_regions;
                 }
@@ -353,8 +358,7 @@ static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
                 probe_ent = vt6421_init_probe_ent(pdev);
 
         if (!probe_ent) {
-                printk(KERN_ERR DRV_NAME "(%s): out of memory\n",
-                       pci_name(pdev));
+                dev_printk(KERN_ERR, &pdev->dev, "out of memory\n");
                 rc = -ENOMEM;
                 goto err_out_regions;
         }