Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 483 insertions, 0 deletions

diff --git a/drivers/scsi/sata_svw.c b/drivers/scsi/sata_svw.c
new file mode 100644
index 000000000000..8d1a5d25c053
--- /dev/null
+++ b/drivers/scsi/sata_svw.c
@@ -0,0 +1,483 @@
+/*
+ *  sata_svw.c - ServerWorks / Apple K2 SATA
+ *
+ *  Maintained by: Benjamin Herrenschmidt <benh@kernel.crashing.org> and
+ *                 Jeff Garzik <jgarzik@pobox.com>
+ *                  Please ALWAYS copy linux-ide@vger.kernel.org
+ *                  on emails.
+ *
+ *  Copyright 2003 Benjamin Herrenschmidt <benh@kernel.crashing.org>
+ *
+ *  Bits from Jeff Garzik, Copyright RedHat, Inc.
+ *
+ *  This driver probably works with non-Apple versions of the
+ *  Broadcom chipset...
+ *
+ *  The contents of this file are subject to the Open
+ *  Software License version 1.1 that can be found at
+ *  http://www.opensource.org/licenses/osl-1.1.txt and is included herein
+ *  by reference.
+ *
+ *  Alternatively, the contents of this file may be used under the terms
+ *  of the GNU General Public License version 2 (the "GPL") as distributed
+ *  in the kernel source COPYING file, in which case the provisions of
+ *  the GPL are applicable instead of the above.  If you wish to allow
+ *  the use of your version of this file only under the terms of the
+ *  GPL and not to allow others to use your version of this file under
+ *  the OSL, indicate your decision by deleting the provisions above and
+ *  replace them with the notice and other provisions required by the GPL.
+ *  If you do not delete the provisions above, a recipient may use your
+ *  version of this file under either the OSL or the GPL.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include "scsi.h"
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+
+#ifdef CONFIG_PPC_OF
+#include <asm/prom.h>
+#include <asm/pci-bridge.h>
+#endif /* CONFIG_PPC_OF */
+
+#define DRV_NAME        "sata_svw"
+#define DRV_VERSION     "1.05"
+
+/* Taskfile registers offsets */
+#define K2_SATA_TF_CMD_OFFSET           0x00
+#define K2_SATA_TF_DATA_OFFSET          0x00
+#define K2_SATA_TF_ERROR_OFFSET         0x04
+#define K2_SATA_TF_NSECT_OFFSET         0x08
+#define K2_SATA_TF_LBAL_OFFSET          0x0c
+#define K2_SATA_TF_LBAM_OFFSET          0x10
+#define K2_SATA_TF_LBAH_OFFSET          0x14
+#define K2_SATA_TF_DEVICE_OFFSET        0x18
+#define K2_SATA_TF_CMDSTAT_OFFSET       0x1c
+#define K2_SATA_TF_CTL_OFFSET           0x20
+
+/* DMA base */
+#define K2_SATA_DMA_CMD_OFFSET          0x30
+
+/* SCRs base */
+#define K2_SATA_SCR_STATUS_OFFSET       0x40
+#define K2_SATA_SCR_ERROR_OFFSET        0x44
+#define K2_SATA_SCR_CONTROL_OFFSET      0x48
+
+/* Others */
+#define K2_SATA_SICR1_OFFSET            0x80
+#define K2_SATA_SICR2_OFFSET            0x84
+#define K2_SATA_SIM_OFFSET              0x88
+
+/* Port stride */
+#define K2_SATA_PORT_OFFSET             0x100
+
+
+static u32 k2_sata_scr_read (struct ata_port *ap, unsigned int sc_reg)
+{
+        if (sc_reg > SCR_CONTROL)
+                return 0xffffffffU;
+        return readl((void *) ap->ioaddr.scr_addr + (sc_reg * 4));
+}
+
+
+static void k2_sata_scr_write (struct ata_port *ap, unsigned int sc_reg,
+                               u32 val)
+{
+        if (sc_reg > SCR_CONTROL)
+                return;
+        writel(val, (void *) ap->ioaddr.scr_addr + (sc_reg * 4));
+}
+
+
+static void k2_sata_tf_load(struct ata_port *ap, struct ata_taskfile *tf)
+{
+        struct ata_ioports *ioaddr = &ap->ioaddr;
+        unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
+
+        if (tf->ctl != ap->last_ctl) {
+                writeb(tf->ctl, ioaddr->ctl_addr);
+                ap->last_ctl = tf->ctl;
+                ata_wait_idle(ap);
+        }
+        if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
+                writew(tf->feature | (((u16)tf->hob_feature) << 8), ioaddr->feature_addr);
+                writew(tf->nsect | (((u16)tf->hob_nsect) << 8), ioaddr->nsect_addr);
+                writew(tf->lbal | (((u16)tf->hob_lbal) << 8), ioaddr->lbal_addr);
+                writew(tf->lbam | (((u16)tf->hob_lbam) << 8), ioaddr->lbam_addr);
+                writew(tf->lbah | (((u16)tf->hob_lbah) << 8), ioaddr->lbah_addr);
+        } else if (is_addr) {
+                writew(tf->feature, ioaddr->feature_addr);
+                writew(tf->nsect, ioaddr->nsect_addr);
+                writew(tf->lbal, ioaddr->lbal_addr);
+                writew(tf->lbam, ioaddr->lbam_addr);
+                writew(tf->lbah, ioaddr->lbah_addr);
+        }
+
+        if (tf->flags & ATA_TFLAG_DEVICE)
+                writeb(tf->device, ioaddr->device_addr);
+
+        ata_wait_idle(ap);
+}
+
+
+static void k2_sata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
+{
+        struct ata_ioports *ioaddr = &ap->ioaddr;
+        u16 nsect, lbal, lbam, lbah;
+
+        nsect = tf->nsect = readw(ioaddr->nsect_addr);
+        lbal = tf->lbal = readw(ioaddr->lbal_addr);
+        lbam = tf->lbam = readw(ioaddr->lbam_addr);
+        lbah = tf->lbah = readw(ioaddr->lbah_addr);
+        tf->device = readw(ioaddr->device_addr);
+
+        if (tf->flags & ATA_TFLAG_LBA48) {
+                tf->hob_feature = readw(ioaddr->error_addr) >> 8;
+                tf->hob_nsect = nsect >> 8;
+                tf->hob_lbal = lbal >> 8;
+                tf->hob_lbam = lbam >> 8;
+                tf->hob_lbah = lbah >> 8;
+        }
+}
+
+/**
+ *      k2_bmdma_setup_mmio - Set up PCI IDE BMDMA transaction (MMIO)
+ *      @qc: Info associated with this ATA transaction.
+ *
+ *      LOCKING:
+ *      spin_lock_irqsave(host_set lock)
+ */
+
+static void k2_bmdma_setup_mmio (struct ata_queued_cmd *qc)
+{
+        struct ata_port *ap = qc->ap;
+        unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE);
+        u8 dmactl;
+        void *mmio = (void *) ap->ioaddr.bmdma_addr;
+        /* load PRD table addr. */
+        mb();   /* make sure PRD table writes are visible to controller */
+        writel(ap->prd_dma, mmio + ATA_DMA_TABLE_OFS);
+
+        /* specify data direction, triple-check start bit is clear */
+        dmactl = readb(mmio + ATA_DMA_CMD);
+        dmactl &= ~(ATA_DMA_WR | ATA_DMA_START);
+        if (!rw)
+                dmactl |= ATA_DMA_WR;
+        writeb(dmactl, mmio + ATA_DMA_CMD);
+
+        /* issue r/w command if this is not a ATA DMA command*/
+        if (qc->tf.protocol != ATA_PROT_DMA)
+                ap->ops->exec_command(ap, &qc->tf);
+}
+
+/**
+ *      k2_bmdma_start_mmio - Start a PCI IDE BMDMA transaction (MMIO)
+ *      @qc: Info associated with this ATA transaction.
+ *
+ *      LOCKING:
+ *      spin_lock_irqsave(host_set lock)
+ */
+
+static void k2_bmdma_start_mmio (struct ata_queued_cmd *qc)
+{
+        struct ata_port *ap = qc->ap;
+        void *mmio = (void *) ap->ioaddr.bmdma_addr;
+        u8 dmactl;
+
+        /* start host DMA transaction */
+        dmactl = readb(mmio + ATA_DMA_CMD);
+        writeb(dmactl | ATA_DMA_START, mmio + ATA_DMA_CMD);
+        /* There is a race condition in certain SATA controllers that can 
+           be seen when the r/w command is given to the controller before the 
+           host DMA is started. On a Read command, the controller would initiate
+           the command to the drive even before it sees the DMA start. When there
+           are very fast drives connected to the controller, or when the data request 
+           hits in the drive cache, there is the possibility that the drive returns a part
+           or all of the requested data to the controller before the DMA start is issued.
+           In this case, the controller would become confused as to what to do with the data.
+           In the worst case when all the data is returned back to the controller, the
+           controller could hang. In other cases it could return partial data returning
+           in data corruption. This problem has been seen in PPC systems and can also appear
+           on an system with very fast disks, where the SATA controller is sitting behind a 
+           number of bridges, and hence there is significant latency between the r/w command
+           and the start command. */
+        /* issue r/w command if the access is to ATA*/
+        if (qc->tf.protocol == ATA_PROT_DMA)
+                ap->ops->exec_command(ap, &qc->tf);
+}
+
+                                                                              
+static u8 k2_stat_check_status(struct ata_port *ap)
+{
+        return readl((void *) ap->ioaddr.status_addr);
+}
+
+#ifdef CONFIG_PPC_OF
+/*
+ * k2_sata_proc_info
+ * inout : decides on the direction of the dataflow and the meaning of the
+ *         variables
+ * buffer: If inout==FALSE data is being written to it else read from it
+ * *start: If inout==FALSE start of the valid data in the buffer
+ * offset: If inout==FALSE offset from the beginning of the imaginary file
+ *         from which we start writing into the buffer
+ * length: If inout==FALSE max number of bytes to be written into the buffer
+ *         else number of bytes in the buffer
+ */
+static int k2_sata_proc_info(struct Scsi_Host *shost, char *page, char **start,
+                             off_t offset, int count, int inout)
+{
+        struct ata_port *ap;
+        struct device_node *np;
+        int len, index;
+
+        /* Find  the ata_port */
+        ap = (struct ata_port *) &shost->hostdata[0];
+        if (ap == NULL)
+                return 0;
+
+        /* Find the OF node for the PCI device proper */
+        np = pci_device_to_OF_node(to_pci_dev(ap->host_set->dev));
+        if (np == NULL)
+                return 0;
+
+        /* Match it to a port node */
+        index = (ap == ap->host_set->ports[0]) ? 0 : 1;
+        for (np = np->child; np != NULL; np = np->sibling) {
+                u32 *reg = (u32 *)get_property(np, "reg", NULL);
+                if (!reg)
+                        continue;
+                if (index == *reg)
+                        break;
+        }
+        if (np == NULL)
+                return 0;
+
+        len = sprintf(page, "devspec: %s\n", np->full_name);
+
+        return len;
+}
+#endif /* CONFIG_PPC_OF */
+
+
+static Scsi_Host_Template k2_sata_sht = {
+        .module                 = THIS_MODULE,
+        .name                   = DRV_NAME,
+        .ioctl                  = ata_scsi_ioctl,
+        .queuecommand           = ata_scsi_queuecmd,
+        .eh_strategy_handler    = ata_scsi_error,
+        .can_queue              = ATA_DEF_QUEUE,
+        .this_id                = ATA_SHT_THIS_ID,
+        .sg_tablesize           = LIBATA_MAX_PRD,
+        .max_sectors            = ATA_MAX_SECTORS,
+        .cmd_per_lun            = ATA_SHT_CMD_PER_LUN,
+        .emulated               = ATA_SHT_EMULATED,
+        .use_clustering         = ATA_SHT_USE_CLUSTERING,
+        .proc_name              = DRV_NAME,
+        .dma_boundary           = ATA_DMA_BOUNDARY,
+        .slave_configure        = ata_scsi_slave_config,
+#ifdef CONFIG_PPC_OF
+        .proc_info              = k2_sata_proc_info,
+#endif
+        .bios_param             = ata_std_bios_param,
+        .ordered_flush          = 1,
+};
+
+
+static struct ata_port_operations k2_sata_ops = {
+        .port_disable           = ata_port_disable,
+        .tf_load                = k2_sata_tf_load,
+        .tf_read                = k2_sata_tf_read,
+        .check_status           = k2_stat_check_status,
+        .exec_command           = ata_exec_command,
+        .dev_select             = ata_std_dev_select,
+        .phy_reset              = sata_phy_reset,
+        .bmdma_setup            = k2_bmdma_setup_mmio,
+        .bmdma_start            = k2_bmdma_start_mmio,
+        .bmdma_stop             = ata_bmdma_stop,
+        .bmdma_status           = ata_bmdma_status,
+        .qc_prep                = ata_qc_prep,
+        .qc_issue               = ata_qc_issue_prot,
+        .eng_timeout            = ata_eng_timeout,
+        .irq_handler            = ata_interrupt,
+        .irq_clear              = ata_bmdma_irq_clear,
+        .scr_read               = k2_sata_scr_read,
+        .scr_write              = k2_sata_scr_write,
+        .port_start             = ata_port_start,
+        .port_stop              = ata_port_stop,
+};
+
+static void k2_sata_setup_port(struct ata_ioports *port, unsigned long base)
+{
+        port->cmd_addr          = base + K2_SATA_TF_CMD_OFFSET;
+        port->data_addr         = base + K2_SATA_TF_DATA_OFFSET;
+        port->feature_addr      =
+        port->error_addr        = base + K2_SATA_TF_ERROR_OFFSET;
+        port->nsect_addr        = base + K2_SATA_TF_NSECT_OFFSET;
+        port->lbal_addr         = base + K2_SATA_TF_LBAL_OFFSET;
+        port->lbam_addr         = base + K2_SATA_TF_LBAM_OFFSET;
+        port->lbah_addr         = base + K2_SATA_TF_LBAH_OFFSET;
+        port->device_addr       = base + K2_SATA_TF_DEVICE_OFFSET;
+        port->command_addr      =
+        port->status_addr       = base + K2_SATA_TF_CMDSTAT_OFFSET;
+        port->altstatus_addr    =
+        port->ctl_addr          = base + K2_SATA_TF_CTL_OFFSET;
+        port->bmdma_addr        = base + K2_SATA_DMA_CMD_OFFSET;
+        port->scr_addr          = base + K2_SATA_SCR_STATUS_OFFSET;
+}
+
+
+static int k2_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+        static int printed_version;
+        struct ata_probe_ent *probe_ent = NULL;
+        unsigned long base;
+        void *mmio_base;
+        int pci_dev_busy = 0;
+        int rc;
+
+        if (!printed_version++)
+                printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
+
+        /*
+         * If this driver happens to only be useful on Apple's K2, then
+         * we should check that here as it has a normal Serverworks ID
+         */
+        rc = pci_enable_device(pdev);
+        if (rc)
+                return rc;
+        /*
+         * Check if we have resources mapped at all (second function may
+         * have been disabled by firmware)
+         */
+        if (pci_resource_len(pdev, 5) == 0)
+                return -ENODEV;
+
+        /* Request PCI regions */
+        rc = pci_request_regions(pdev, DRV_NAME);
+        if (rc) {
+                pci_dev_busy = 1;
+                goto err_out;
+        }
+
+        rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
+        if (rc)
+                goto err_out_regions;
+        rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
+        if (rc)
+                goto err_out_regions;
+
+        probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL);
+        if (probe_ent == NULL) {
+                rc = -ENOMEM;
+                goto err_out_regions;
+        }
+
+        memset(probe_ent, 0, sizeof(*probe_ent));
+        probe_ent->dev = pci_dev_to_dev(pdev);
+        INIT_LIST_HEAD(&probe_ent->node);
+
+        mmio_base = ioremap(pci_resource_start(pdev, 5),
+                            pci_resource_len(pdev, 5));
+        if (mmio_base == NULL) {
+                rc = -ENOMEM;
+                goto err_out_free_ent;
+        }
+        base = (unsigned long) mmio_base;
+
+        /* Clear a magic bit in SCR1 according to Darwin, those help
+         * some funky seagate drives (though so far, those were already
+         * set by the firmware on the machines I had access to
+         */
+        writel(readl(mmio_base + K2_SATA_SICR1_OFFSET) & ~0x00040000,
+               mmio_base + K2_SATA_SICR1_OFFSET);
+
+        /* Clear SATA error & interrupts we don't use */
+        writel(0xffffffff, mmio_base + K2_SATA_SCR_ERROR_OFFSET);
+        writel(0x0, mmio_base + K2_SATA_SIM_OFFSET);
+
+        probe_ent->sht = &k2_sata_sht;
+        probe_ent->host_flags = ATA_FLAG_SATA | ATA_FLAG_SATA_RESET |
+                                ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO;
+        probe_ent->port_ops = &k2_sata_ops;
+        probe_ent->n_ports = 4;
+        probe_ent->irq = pdev->irq;
+        probe_ent->irq_flags = SA_SHIRQ;
+        probe_ent->mmio_base = mmio_base;
+
+        /* We don't care much about the PIO/UDMA masks, but the core won't like us
+         * if we don't fill these
+         */
+        probe_ent->pio_mask = 0x1f;
+        probe_ent->mwdma_mask = 0x7;
+        probe_ent->udma_mask = 0x7f;
+
+        /* We have 4 ports per PCI function */
+        k2_sata_setup_port(&probe_ent->port[0], base + 0 * K2_SATA_PORT_OFFSET);
+        k2_sata_setup_port(&probe_ent->port[1], base + 1 * K2_SATA_PORT_OFFSET);
+        k2_sata_setup_port(&probe_ent->port[2], base + 2 * K2_SATA_PORT_OFFSET);
+        k2_sata_setup_port(&probe_ent->port[3], base + 3 * K2_SATA_PORT_OFFSET);
+
+        pci_set_master(pdev);
+
+        /* FIXME: check ata_device_add return value */
+        ata_device_add(probe_ent);
+        kfree(probe_ent);
+
+        return 0;
+
+err_out_free_ent:
+        kfree(probe_ent);
+err_out_regions:
+        pci_release_regions(pdev);
+err_out:
+        if (!pci_dev_busy)
+                pci_disable_device(pdev);
+        return rc;
+}
+
+
+static struct pci_device_id k2_sata_pci_tbl[] = {
+        { 0x1166, 0x0240, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+        { 0x1166, 0x0241, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+        { 0x1166, 0x0242, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+        { }
+};
+
+
+static struct pci_driver k2_sata_pci_driver = {
+        .name                   = DRV_NAME,
+        .id_table               = k2_sata_pci_tbl,
+        .probe                  = k2_sata_init_one,
+        .remove                 = ata_pci_remove_one,
+};
+
+
+static int __init k2_sata_init(void)
+{
+        return pci_module_init(&k2_sata_pci_driver);
+}
+
+
+static void __exit k2_sata_exit(void)
+{
+        pci_unregister_driver(&k2_sata_pci_driver);
+}
+
+
+MODULE_AUTHOR("Benjamin Herrenschmidt");
+MODULE_DESCRIPTION("low-level driver for K2 SATA controller");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, k2_sata_pci_tbl);
+MODULE_VERSION(DRV_VERSION);
+
+module_init(k2_sata_init);
+module_exit(k2_sata_exit);