[SCSI] qla2xxx: Remove unnecessary spinlock primitive - mbx_reg_lock.

Since, mailbox commands are executed in a synchronous
manner, there is no need to have a separate spinlock
primitive to protect data/register access shared by callers.

Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

4 files changed, 0 insertions, 42 deletions

diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 2a59faa632df..e83e4a34725a 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -2338,8 +2338,6 @@ typedef struct scsi_qla_host {
 #define MBX_INTR_WAIT   2
 #define MBX_UPDATE_FLASH_ACTIVE 3
 
-        spinlock_t      mbx_reg_lock;   /* Mbx Cmd Register Lock */
-
         struct semaphore mbx_cmd_sem;   /* Serialialize mbx access */
         struct semaphore mbx_intr_sem;  /* Used for completion notification */
 
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index df69dc016a53..c948a8ce7232 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -86,12 +86,8 @@ qla2100_intr_handler(int irq, void *dev_id)
 
         if (test_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags) &&
             (status & MBX_INTERRUPT) && ha->flags.mbox_int) {
-                spin_lock_irqsave(&ha->mbx_reg_lock, flags);
-
                 set_bit(MBX_INTERRUPT, &ha->mbx_cmd_flags);
                 up(&ha->mbx_intr_sem);
-
-                spin_unlock_irqrestore(&ha->mbx_reg_lock, flags);
         }
 
         return (IRQ_HANDLED);
@@ -197,12 +193,8 @@ qla2300_intr_handler(int irq, void *dev_id)
 
         if (test_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags) &&
             (status & MBX_INTERRUPT) && ha->flags.mbox_int) {
-                spin_lock_irqsave(&ha->mbx_reg_lock, flags);
-
                 set_bit(MBX_INTERRUPT, &ha->mbx_cmd_flags);
                 up(&ha->mbx_intr_sem);
-
-                spin_unlock_irqrestore(&ha->mbx_reg_lock, flags);
         }
 
         return (IRQ_HANDLED);
@@ -1491,12 +1483,8 @@ qla24xx_intr_handler(int irq, void *dev_id)
 
         if (test_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags) &&
             (status & MBX_INTERRUPT) && ha->flags.mbox_int) {
-                spin_lock_irqsave(&ha->mbx_reg_lock, flags);
-
                 set_bit(MBX_INTERRUPT, &ha->mbx_cmd_flags);
                 up(&ha->mbx_intr_sem);
-
-                spin_unlock_irqrestore(&ha->mbx_reg_lock, flags);
         }
 
         return IRQ_HANDLED;
@@ -1629,12 +1617,8 @@ qla24xx_msix_default(int irq, void *dev_id)
 
         if (test_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags) &&
             (status & MBX_INTERRUPT) && ha->flags.mbox_int) {
-                spin_lock_irqsave(&ha->mbx_reg_lock, flags);
-
                 set_bit(MBX_INTERRUPT, &ha->mbx_cmd_flags);
                 up(&ha->mbx_intr_sem);
-
-                spin_unlock_irqrestore(&ha->mbx_reg_lock, flags);
         }
 
         return IRQ_HANDLED;
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index c52bd9ca8d7a..c6f0cdf4cdc4 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -55,7 +55,6 @@ qla2x00_mailbox_command(scsi_qla_host_t *ha, mbx_cmd_t *mcp)
         uint16_t __iomem *optr;
         uint32_t        cnt;
         uint32_t        mboxes;
-        unsigned long   mbx_flags = 0;
         unsigned long   wait_time;
 
         rval = QLA_SUCCESS;
@@ -81,10 +80,6 @@ qla2x00_mailbox_command(scsi_qla_host_t *ha, mbx_cmd_t *mcp)
         /* Save mailbox command for debug */
         ha->mcp = mcp;
 
-        /* Try to get mailbox register access */
-        if (!abort_active)
-                spin_lock_irqsave(&ha->mbx_reg_lock, mbx_flags);
-
         DEBUG11(printk("scsi(%ld): prepare to issue mbox cmd=0x%x.\n",
             ha->host_no, mcp->mb[0]));
 
@@ -161,9 +156,6 @@ qla2x00_mailbox_command(scsi_qla_host_t *ha, mbx_cmd_t *mcp)
                         WRT_REG_WORD(&reg->isp.hccr, HCCR_SET_HOST_INT);
                 spin_unlock_irqrestore(&ha->hardware_lock, flags);
 
-                if (!abort_active)
-                        spin_unlock_irqrestore(&ha->mbx_reg_lock, mbx_flags);
-
                 /* Wait for either the timer to expire
                  * or the mbox completion interrupt
                  */
@@ -184,8 +176,6 @@ qla2x00_mailbox_command(scsi_qla_host_t *ha, mbx_cmd_t *mcp)
                 else
                         WRT_REG_WORD(&reg->isp.hccr, HCCR_SET_HOST_INT);
                 spin_unlock_irqrestore(&ha->hardware_lock, flags);
-                if (!abort_active)
-                        spin_unlock_irqrestore(&ha->mbx_reg_lock, mbx_flags);
 
                 wait_time = jiffies + mcp->tov * HZ; /* wait at most tov secs */
                 while (!ha->flags.mbox_int) {
@@ -201,9 +191,6 @@ qla2x00_mailbox_command(scsi_qla_host_t *ha, mbx_cmd_t *mcp)
                 } /* while */
         }
 
-        if (!abort_active)
-                spin_lock_irqsave(&ha->mbx_reg_lock, mbx_flags);
-
         /* Check whether we timed out */
         if (ha->flags.mbox_int) {
                 uint16_t *iptr2;
@@ -256,9 +243,6 @@ qla2x00_mailbox_command(scsi_qla_host_t *ha, mbx_cmd_t *mcp)
                 rval = QLA_FUNCTION_TIMEOUT;
         }
 
-        if (!abort_active)
-                spin_unlock_irqrestore(&ha->mbx_reg_lock, mbx_flags);
-
         ha->flags.mbox_busy = 0;
 
         /* Clean up */
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index d35ff4a2a764..6f161d3f661b 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -1563,14 +1563,6 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
         INIT_LIST_HEAD(&ha->list);
         INIT_LIST_HEAD(&ha->fcports);
 
-        /*
-         * These locks are used to prevent more than one CPU
-         * from modifying the queue at the same time. The
-         * higher level "host_lock" will reduce most
-         * contention for these locks.
-         */
-        spin_lock_init(&ha->mbx_reg_lock);
-
         qla2x00_config_dma_addressing(ha);
         if (qla2x00_mem_alloc(ha)) {
                 qla_printk(KERN_WARNING, ha,