[SCSI] qla2xxx: Add ISP24xx definitions.

Add ISP24xx definitions.

Add requisite structure definitions and #define's for ISP24xx
support.  Also drop volatile modifiers from device_reg_* register
layouts as the members are never really accessed, only their
offsets within the layout are used during reads and writes.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

1 files changed, 23 insertions, 26 deletions

diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 27b7f9259f28..226bec05d4d1 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -195,6 +195,7 @@ qla2100_pci_config(scsi_qla_host_t *ha)
 {
         uint16_t w, mwi;
         unsigned long flags;
+        struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
 
         qla_printk(KERN_INFO, ha, "Configuring PCI space...\n");
 
@@ -215,7 +216,7 @@ qla2100_pci_config(scsi_qla_host_t *ha)
 
         /* Get PCI bus information. */
         spin_lock_irqsave(&ha->hardware_lock, flags);
-        ha->pci_attr = RD_REG_WORD(&ha->iobase->ctrl_status);
+        ha->pci_attr = RD_REG_WORD(&reg->ctrl_status);
         spin_unlock_irqrestore(&ha->hardware_lock, flags);
 
         return QLA_SUCCESS;
@@ -233,6 +234,7 @@ qla2300_pci_config(scsi_qla_host_t *ha)
         uint16_t        w, mwi;
         unsigned long   flags = 0;
         uint32_t        cnt;
+        struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
 
         qla_printk(KERN_INFO, ha, "Configuring PCI space...\n");
 
@@ -259,34 +261,32 @@ qla2300_pci_config(scsi_qla_host_t *ha)
                 spin_lock_irqsave(&ha->hardware_lock, flags);
 
                 /* Pause RISC. */
-                WRT_REG_WORD(&ha->iobase->hccr, HCCR_PAUSE_RISC);
+                WRT_REG_WORD(&reg->hccr, HCCR_PAUSE_RISC);
                 for (cnt = 0; cnt < 30000; cnt++) {
-                        if ((RD_REG_WORD(&ha->iobase->hccr) &
-                            HCCR_RISC_PAUSE) != 0)
+                        if ((RD_REG_WORD(&reg->hccr) & HCCR_RISC_PAUSE) != 0)
                                 break;
 
                         udelay(10);
                 }
 
                 /* Select FPM registers. */
-                WRT_REG_WORD(&ha->iobase->ctrl_status, 0x20);
-                RD_REG_WORD(&ha->iobase->ctrl_status);
+                WRT_REG_WORD(&reg->ctrl_status, 0x20);
+                RD_REG_WORD(&reg->ctrl_status);
 
                 /* Get the fb rev level */
-                ha->fb_rev = RD_FB_CMD_REG(ha, ha->iobase);
+                ha->fb_rev = RD_FB_CMD_REG(ha, reg);
 
                 if (ha->fb_rev == FPM_2300)
                         w &= ~PCI_COMMAND_INVALIDATE;
 
                 /* Deselect FPM registers. */
-                WRT_REG_WORD(&ha->iobase->ctrl_status, 0x0);
-                RD_REG_WORD(&ha->iobase->ctrl_status);
+                WRT_REG_WORD(&reg->ctrl_status, 0x0);
+                RD_REG_WORD(&reg->ctrl_status);
 
                 /* Release RISC module. */
-                WRT_REG_WORD(&ha->iobase->hccr, HCCR_RELEASE_RISC);
+                WRT_REG_WORD(&reg->hccr, HCCR_RELEASE_RISC);
                 for (cnt = 0; cnt < 30000; cnt++) {
-                        if ((RD_REG_WORD(&ha->iobase->hccr) &
-                            HCCR_RISC_PAUSE) == 0)
+                        if ((RD_REG_WORD(&reg->hccr) & HCCR_RISC_PAUSE) == 0)
                                 break;
 
                         udelay(10);
@@ -305,7 +305,7 @@ qla2300_pci_config(scsi_qla_host_t *ha)
 
         /* Get PCI bus information. */
         spin_lock_irqsave(&ha->hardware_lock, flags);
-        ha->pci_attr = RD_REG_WORD(&ha->iobase->ctrl_status);
+        ha->pci_attr = RD_REG_WORD(&reg->ctrl_status);
         spin_unlock_irqrestore(&ha->hardware_lock, flags);
 
         return QLA_SUCCESS;
@@ -352,7 +352,7 @@ void
 qla2x00_reset_chip(scsi_qla_host_t *ha) 
 {
         unsigned long   flags = 0;
-        device_reg_t __iomem *reg = ha->iobase;
+        struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
         uint32_t        cnt;
         unsigned long   mbx_flags = 0;
         uint16_t        cmd;
@@ -505,7 +505,7 @@ int
 qla2x00_chip_diag(scsi_qla_host_t *ha)
 {
         int             rval;
-        device_reg_t __iomem *reg = ha->iobase;
+        struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
         unsigned long   flags = 0;
         uint16_t        data;
         uint32_t        cnt;
@@ -889,7 +889,7 @@ qla2x00_update_fw_options(scsi_qla_host_t *ha)
 void
 qla2x00_config_rings(struct scsi_qla_host *ha)
 {
-        device_reg_t __iomem *reg = ha->iobase;
+        struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
 
         /* Setup ring parameters in initialization control block. */
         ha->init_cb->request_q_outpointer = __constant_cpu_to_le16(0);
@@ -1196,7 +1196,7 @@ qla2x00_nvram_config(scsi_qla_host_t *ha)
         init_cb_t *icb   = ha->init_cb;
         nvram_t *nv    = (nvram_t *)ha->request_ring;
         uint16_t  *wptr  = (uint16_t *)ha->request_ring;
-        device_reg_t __iomem *reg = ha->iobase;
+        struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
         uint8_t  timer_mode;
 
         rval = QLA_SUCCESS;
@@ -1389,8 +1389,6 @@ qla2x00_nvram_config(scsi_qla_host_t *ha)
         /*
          * Set host adapter parameters.
          */
-        ha->nvram_version = nv->nvram_version;
-
         ha->flags.disable_risc_code_load = ((nv->host_p[0] & BIT_4) ? 1 : 0);
         /* Always load RISC code on non ISP2[12]00 chips. */
         if (!IS_QLA2100(ha) && !IS_QLA2200(ha))
@@ -1410,7 +1408,8 @@ qla2x00_nvram_config(scsi_qla_host_t *ha)
         ha->serial0 = icb->port_name[5];
         ha->serial1 = icb->port_name[6];
         ha->serial2 = icb->port_name[7];
-        memcpy(ha->node_name, icb->node_name, WWN_SIZE);
+        ha->node_name = icb->node_name;
+        ha->port_name = icb->port_name;
 
         icb->execution_throttle = __constant_cpu_to_le16(0xFFFF);
 
@@ -2158,7 +2157,7 @@ qla2x00_find_all_fabric_devs(scsi_qla_host_t *ha, struct list_head *new_fcports)
         loop_id = ha->min_external_loopid;
 
         for (; loop_id <= ha->last_loop_id; loop_id++) {
-                if (RESERVED_LOOP_ID(loop_id))
+                if (qla2x00_is_reserved_id(ha, loop_id))
                         continue;
 
                 if (atomic_read(&ha->loop_down_timer) ||
@@ -2328,7 +2327,7 @@ qla2x00_find_new_loop_id(scsi_qla_host_t *ha, fc_port_t *dev)
                 }
 
                 /* Skip reserved loop IDs. */
-                while (RESERVED_LOOP_ID(dev->loop_id)) {
+                while (qla2x00_is_reserved_id(ha, dev->loop_id)) {
                         dev->loop_id++;
                 }
 
@@ -2888,7 +2887,7 @@ static int
 qla2x00_restart_isp(scsi_qla_host_t *ha)
 {
         uint8_t         status = 0;
-        device_reg_t __iomem *reg = ha->iobase;
+        struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
         unsigned long   flags = 0;
         uint32_t wait_time;
 
@@ -2901,8 +2900,6 @@ qla2x00_restart_isp(scsi_qla_host_t *ha)
                                 goto done;
                         }
 
-                        reg = ha->iobase;
-
                         spin_lock_irqsave(&ha->hardware_lock, flags);
 
                         /* Disable SRAM, Instruction RAM and GP RAM parity. */
@@ -2973,7 +2970,7 @@ void
 qla2x00_reset_adapter(scsi_qla_host_t *ha)
 {
         unsigned long flags = 0;
-        device_reg_t __iomem *reg = ha->iobase;
+        struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
 
         ha->flags.online = 0;
         ha->isp_ops.disable_intrs(ha);