[SCSI] qla1280: don't use bitfields for hardware access, parameters

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Thiemo Seufer <ths@linux-mips.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

1 files changed, 72 insertions, 71 deletions

diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c
index 1a8b1147821d..6481deb57048 100644
--- a/drivers/scsi/qla1280.c
+++ b/drivers/scsi/qla1280.c
@@ -1328,7 +1328,7 @@ qla1280_set_target_parameters(struct scsi_qla_host *ha, int bus, int target)
         uint8_t mr;
         uint16_t mb[MAILBOX_REGISTER_COUNT];
         struct nvram *nv;
-        int status;
+        int status, lun;
 
         nv = &ha->nvram;
 
@@ -1336,24 +1336,38 @@ qla1280_set_target_parameters(struct scsi_qla_host *ha, int bus, int target)
 
         /* Set Target Parameters. */
         mb[0] = MBC_SET_TARGET_PARAMETERS;
-        mb[1] = (uint16_t) (bus ? target | BIT_7 : target);
-        mb[1] <<= 8;
-
-        mb[2] = (nv->bus[bus].target[target].parameter.c << 8);
+        mb[1] = (uint16_t)((bus ? target | BIT_7 : target) << 8);
+        mb[2] = nv->bus[bus].target[target].parameter.renegotiate_on_error << 8;
+        mb[2] |= nv->bus[bus].target[target].parameter.stop_queue_on_check << 9;
+        mb[2] |= nv->bus[bus].target[target].parameter.auto_request_sense << 10;
+        mb[2] |= nv->bus[bus].target[target].parameter.tag_queuing << 11;
+        mb[2] |= nv->bus[bus].target[target].parameter.enable_sync << 12;
+        mb[2] |= nv->bus[bus].target[target].parameter.enable_wide << 13;
+        mb[2] |= nv->bus[bus].target[target].parameter.parity_checking << 14;
+        mb[2] |= nv->bus[bus].target[target].parameter.disconnect_allowed << 15;
 
         if (IS_ISP1x160(ha)) {
                 mb[2] |= nv->bus[bus].target[target].ppr_1x160.flags.enable_ppr << 5;
-                mb[3] = (nv->bus[bus].target[target].flags.flags1x160.sync_offset << 8) |
-                         nv->bus[bus].target[target].sync_period;
+                mb[3] = (nv->bus[bus].target[target].flags.flags1x160.sync_offset << 8);
                 mb[6] = (nv->bus[bus].target[target].ppr_1x160.flags.ppr_options << 8) |
                          nv->bus[bus].target[target].ppr_1x160.flags.ppr_bus_width;
                 mr |= BIT_6;
         } else {
-                mb[3] = (nv->bus[bus].target[target].flags.flags1x80.sync_offset << 8) |
-                         nv->bus[bus].target[target].sync_period;
+                mb[3] = (nv->bus[bus].target[target].flags.flags1x80.sync_offset << 8);
         }
+        mb[3] |= nv->bus[bus].target[target].sync_period;
+
+        status = qla1280_mailbox_command(ha, mr, mb);
 
-        status = qla1280_mailbox_command(ha, mr, &mb[0]);
+        /* Set Device Queue Parameters. */
+        for (lun = 0; lun < MAX_LUNS; lun++) {
+                mb[0] = MBC_SET_DEVICE_QUEUE;
+                mb[1] = (uint16_t)((bus ? target | BIT_7 : target) << 8);
+                mb[1] |= lun;
+                mb[2] = nv->bus[bus].max_queue_depth;
+                mb[3] = nv->bus[bus].target[target].execution_throttle;
+                status |= qla1280_mailbox_command(ha, 0x0f, mb);
+        }
 
         if (status)
                 printk(KERN_WARNING "scsi(%ld:%i:%i): "
@@ -1400,19 +1414,19 @@ qla1280_slave_configure(struct scsi_device *device)
         }
 
 #if LINUX_VERSION_CODE > 0x020500
-        nv->bus[bus].target[target].parameter.f.enable_sync = device->sdtr;
-        nv->bus[bus].target[target].parameter.f.enable_wide = device->wdtr;
+        nv->bus[bus].target[target].parameter.enable_sync = device->sdtr;
+        nv->bus[bus].target[target].parameter.enable_wide = device->wdtr;
         nv->bus[bus].target[target].ppr_1x160.flags.enable_ppr = device->ppr;
 #endif
 
         if (driver_setup.no_sync ||
             (driver_setup.sync_mask &&
              (~driver_setup.sync_mask & (1 << target))))
-                nv->bus[bus].target[target].parameter.f.enable_sync = 0;
+                nv->bus[bus].target[target].parameter.enable_sync = 0;
         if (driver_setup.no_wide ||
             (driver_setup.wide_mask &&
              (~driver_setup.wide_mask & (1 << target))))
-                nv->bus[bus].target[target].parameter.f.enable_wide = 0;
+                nv->bus[bus].target[target].parameter.enable_wide = 0;
         if (IS_ISP1x160(ha)) {
                 if (driver_setup.no_ppr ||
                     (driver_setup.ppr_mask &&
@@ -1421,7 +1435,7 @@ qla1280_slave_configure(struct scsi_device *device)
         }
 
         spin_lock_irqsave(HOST_LOCK, flags);
-        if (nv->bus[bus].target[target].parameter.f.enable_sync)
+        if (nv->bus[bus].target[target].parameter.enable_sync)
                 status = qla1280_set_target_parameters(ha, bus, target);
         qla1280_get_target_parameters(ha, device);
         spin_unlock_irqrestore(HOST_LOCK, flags);
@@ -2151,17 +2165,17 @@ qla1280_set_target_defaults(struct scsi_qla_host *ha, int bus, int target)
 {
         struct nvram *nv = &ha->nvram;
 
-        nv->bus[bus].target[target].parameter.f.renegotiate_on_error = 1;
-        nv->bus[bus].target[target].parameter.f.auto_request_sense = 1;
-        nv->bus[bus].target[target].parameter.f.tag_queuing = 1;
-        nv->bus[bus].target[target].parameter.f.enable_sync = 1;
+        nv->bus[bus].target[target].parameter.renegotiate_on_error = 1;
+        nv->bus[bus].target[target].parameter.auto_request_sense = 1;
+        nv->bus[bus].target[target].parameter.tag_queuing = 1;
+        nv->bus[bus].target[target].parameter.enable_sync = 1;
 #if 1   /* Some SCSI Processors do not seem to like this */
-        nv->bus[bus].target[target].parameter.f.enable_wide = 1;
+        nv->bus[bus].target[target].parameter.enable_wide = 1;
 #endif
-        nv->bus[bus].target[target].parameter.f.parity_checking = 1;
-        nv->bus[bus].target[target].parameter.f.disconnect_allowed = 1;
         nv->bus[bus].target[target].execution_throttle =
                 nv->bus[bus].max_queue_depth - 1;
+        nv->bus[bus].target[target].parameter.parity_checking = 1;
+        nv->bus[bus].target[target].parameter.disconnect_allowed = 1;
 
         if (IS_ISP1x160(ha)) {
                 nv->bus[bus].target[target].flags.flags1x160.device_enable = 1;
@@ -2237,66 +2251,53 @@ qla1280_config_target(struct scsi_qla_host *ha, int bus, int target)
         struct nvram *nv = &ha->nvram;
         uint16_t mb[MAILBOX_REGISTER_COUNT];
         int status, lun;
+        uint16_t flag;
 
         /* Set Target Parameters. */
         mb[0] = MBC_SET_TARGET_PARAMETERS;
-        mb[1] = (uint16_t) (bus ? target | BIT_7 : target);
-        mb[1] <<= 8;
-
-        /*
-         * Do not enable wide, sync, and ppr for the initial
-         * INQUIRY run. We enable this later if we determine
-         * the target actually supports it.
-         */
-        nv->bus[bus].target[target].parameter.f.
-                auto_request_sense = 1;
-        nv->bus[bus].target[target].parameter.f.
-                stop_queue_on_check = 0;
-
-        if (IS_ISP1x160(ha))
-                nv->bus[bus].target[target].ppr_1x160.
-                        flags.enable_ppr = 0;
+        mb[1] = (uint16_t)((bus ? target | BIT_7 : target) << 8);
 
         /*
-         * No sync, wide, etc. while probing
+         * Do not enable sync and ppr for the initial INQUIRY run. We
+         * enable this later if we determine the target actually
+         * supports it.
          */
-        mb[2] = (nv->bus[bus].target[target].parameter.c << 8) &
-                ~(TP_SYNC /*| TP_WIDE | TP_PPR*/);
+        mb[2] = (TP_RENEGOTIATE | TP_AUTO_REQUEST_SENSE | TP_TAGGED_QUEUE
+                 | TP_WIDE | TP_PARITY | TP_DISCONNECT);
 
         if (IS_ISP1x160(ha))
                 mb[3] = nv->bus[bus].target[target].flags.flags1x160.sync_offset << 8;
         else
                 mb[3] = nv->bus[bus].target[target].flags.flags1x80.sync_offset << 8;
         mb[3] |= nv->bus[bus].target[target].sync_period;
-
-        status = qla1280_mailbox_command(ha, BIT_3 | BIT_2 | BIT_1 | BIT_0, &mb[0]);
+        status = qla1280_mailbox_command(ha, 0x0f, mb);
 
         /* Save Tag queuing enable flag. */
-        mb[0] = BIT_0 << target;
-        if (nv->bus[bus].target[target].parameter.f.tag_queuing)
-                ha->bus_settings[bus].qtag_enables |= mb[0];
+        flag = (BIT_0 << target) & mb[0];
+        if (nv->bus[bus].target[target].parameter.tag_queuing)
+                ha->bus_settings[bus].qtag_enables |= flag;
 
         /* Save Device enable flag. */
         if (IS_ISP1x160(ha)) {
                 if (nv->bus[bus].target[target].flags.flags1x160.device_enable)
-                        ha->bus_settings[bus].device_enables |= mb[0];
+                        ha->bus_settings[bus].device_enables |= flag;
                 ha->bus_settings[bus].lun_disables |= 0;
         } else {
                 if (nv->bus[bus].target[target].flags.flags1x80.device_enable)
-                        ha->bus_settings[bus].device_enables |= mb[0];
+                        ha->bus_settings[bus].device_enables |= flag;
                 /* Save LUN disable flag. */
                 if (nv->bus[bus].target[target].flags.flags1x80.lun_disable)
-                        ha->bus_settings[bus].lun_disables |= mb[0];
+                        ha->bus_settings[bus].lun_disables |= flag;
         }
 
         /* Set Device Queue Parameters. */
         for (lun = 0; lun < MAX_LUNS; lun++) {
                 mb[0] = MBC_SET_DEVICE_QUEUE;
-                mb[1] = (uint16_t)(bus ? target | BIT_7 : target);
-                mb[1] = mb[1] << 8 | lun;
+                mb[1] = (uint16_t)((bus ? target | BIT_7 : target) << 8);
+                mb[1] |= lun;
                 mb[2] = nv->bus[bus].max_queue_depth;
                 mb[3] = nv->bus[bus].target[target].execution_throttle;
-                status |= qla1280_mailbox_command(ha, 0x0f, &mb[0]);
+                status |= qla1280_mailbox_command(ha, 0x0f, mb);
         }
 
         return status;
@@ -2341,7 +2342,6 @@ qla1280_nvram_config(struct scsi_qla_host *ha)
         struct nvram *nv = &ha->nvram;
         int bus, target, status = 0;
         uint16_t mb[MAILBOX_REGISTER_COUNT];
-        uint16_t mask;
 
         ENTER("qla1280_nvram_config");
 
@@ -2349,7 +2349,7 @@ qla1280_nvram_config(struct scsi_qla_host *ha)
                 /* Always force AUTO sense for LINUX SCSI */
                 for (bus = 0; bus < MAX_BUSES; bus++)
                         for (target = 0; target < MAX_TARGETS; target++) {
-                                nv->bus[bus].target[target].parameter.f.
+                                nv->bus[bus].target[target].parameter.
                                         auto_request_sense = 1;
                         }
         } else {
@@ -2416,16 +2416,17 @@ qla1280_nvram_config(struct scsi_qla_host *ha)
 
         /* Firmware feature word. */
         mb[0] = MBC_SET_FIRMWARE_FEATURES;
-        mask = BIT_5 | BIT_1 | BIT_0;
-        mb[1] = le16_to_cpu(nv->firmware_feature.w) & (mask);
+        mb[1] = nv->firmware_feature.f.enable_fast_posting;
+        mb[1] |= nv->firmware_feature.f.report_lvd_bus_transition << 1;
+        mb[1] |= nv->firmware_feature.f.disable_synchronous_backoff << 5;
 #if defined(CONFIG_IA64_GENERIC) || defined (CONFIG_IA64_SGI_SN2)
         if (ia64_platform_is("sn2")) {
                 printk(KERN_INFO "scsi(%li): Enabling SN2 PCI DMA "
                        "workaround\n", ha->host_no);
-                mb[1] |= BIT_9;
+                mb[1] |= nv->firmware_feature.f.unused_9 << 9; /* XXX */
         }
 #endif
-        status |= qla1280_mailbox_command(ha, mask, &mb[0]);
+        status |= qla1280_mailbox_command(ha, BIT_1 | BIT_0, mb);
 
         /* Retry count and delay. */
         mb[0] = MBC_SET_RETRY_COUNT;
@@ -2454,27 +2455,27 @@ qla1280_nvram_config(struct scsi_qla_host *ha)
                 mb[2] |= BIT_5;
         if (nv->bus[1].config_2.data_line_active_negation)
                 mb[2] |= BIT_4;
-        status |= qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, &mb[0]);
+        status |= qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, mb);
 
         mb[0] = MBC_SET_DATA_OVERRUN_RECOVERY;
         mb[1] = 2;      /* Reset SCSI bus and return all outstanding IO */
-        status |= qla1280_mailbox_command(ha, BIT_1 | BIT_0, &mb[0]);
+        status |= qla1280_mailbox_command(ha, BIT_1 | BIT_0, mb);
 
         /* thingy */
         mb[0] = MBC_SET_PCI_CONTROL;
-        mb[1] = 2;      /* Data DMA Channel Burst Enable */
-        mb[2] = 2;      /* Command DMA Channel Burst Enable */
-        status |= qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, &mb[0]);
+        mb[1] = BIT_1;  /* Data DMA Channel Burst Enable */
+        mb[2] = BIT_1;  /* Command DMA Channel Burst Enable */
+        status |= qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, mb);
 
         mb[0] = MBC_SET_TAG_AGE_LIMIT;
         mb[1] = 8;
-        status |= qla1280_mailbox_command(ha, BIT_1 | BIT_0, &mb[0]);
+        status |= qla1280_mailbox_command(ha, BIT_1 | BIT_0, mb);
 
         /* Selection timeout. */
         mb[0] = MBC_SET_SELECTION_TIMEOUT;
         mb[1] = nv->bus[0].selection_timeout;
         mb[2] = nv->bus[1].selection_timeout;
-        status |= qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, &mb[0]);
+        status |= qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, mb);
 
         for (bus = 0; bus < ha->ports; bus++)
                 status |= qla1280_config_bus(ha, bus);
@@ -3915,21 +3916,21 @@ qla1280_get_target_options(struct scsi_cmnd *cmd, struct scsi_qla_host *ha)
         result = cmd->request_buffer;
         n = &ha->nvram;
 
-        n->bus[bus].target[target].parameter.f.enable_wide = 0;
-        n->bus[bus].target[target].parameter.f.enable_sync = 0;
+        n->bus[bus].target[target].parameter.enable_wide = 0;
+        n->bus[bus].target[target].parameter.enable_sync = 0;
         n->bus[bus].target[target].ppr_1x160.flags.enable_ppr = 0;
 
         if (result[7] & 0x60)
-                n->bus[bus].target[target].parameter.f.enable_wide = 1;
+                n->bus[bus].target[target].parameter.enable_wide = 1;
         if (result[7] & 0x10)
-                n->bus[bus].target[target].parameter.f.enable_sync = 1;
+                n->bus[bus].target[target].parameter.enable_sync = 1;
         if ((result[2] >= 3) && (result[4] + 5 > 56) &&
             (result[56] & 0x4))
                 n->bus[bus].target[target].ppr_1x160.flags.enable_ppr = 1;
 
         dprintk(2, "get_target_options(): wide %i, sync %i, ppr %i\n",
-                n->bus[bus].target[target].parameter.f.enable_wide,
-                n->bus[bus].target[target].parameter.f.enable_sync,
+                n->bus[bus].target[target].parameter.enable_wide,
+                n->bus[bus].target[target].parameter.enable_sync,
                 n->bus[bus].target[target].ppr_1x160.flags.enable_ppr);
 }
 #endif