aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/scsi/psi_roy.h
diff options
context:
space:
mode:
authorJaroslav Kysela <perex@hera.kernel.org>2005-06-21 10:39:41 -0400
committerJaroslav Kysela <perex@hera.kernel.org>2005-06-21 10:39:41 -0400
commitfae6ec69c84d71b1d5bda9ede1a262c1681684aa (patch)
treeeb4aff9a5c2b7d04ce09a3717bb1dd4a79fe7595 /drivers/scsi/psi_roy.h
parentbbc0274e9bb2e3f1d724d445a2bd32566b9b66f7 (diff)
parent1d345dac1f30af1cd9f3a1faa12f9f18f17f236e (diff)
Merge with /pub/scm/linux/kernel/git/torvalds/linux-2.6.git
Diffstat (limited to 'drivers/scsi/psi_roy.h')
-rw-r--r--drivers/scsi/psi_roy.h331
1 files changed, 0 insertions, 331 deletions
diff --git a/drivers/scsi/psi_roy.h b/drivers/scsi/psi_roy.h
deleted file mode 100644
index c55b9c04c32a..000000000000
--- a/drivers/scsi/psi_roy.h
+++ /dev/null
@@ -1,331 +0,0 @@
1/****************************************************************************
2 * Perceptive Solutions, Inc. PCI-2000 device driver for Linux.
3 *
4 * psi_roy.h - Linux Host Driver for PCI-2000 IntelliCache SCSI Adapters
5 *
6 * Copyright (c) 1997-1999 Perceptive Solutions, Inc.
7 * All Rights Reserved.
8 *
9 * Redistribution and use in source and binary forms, with or without
10 * modification, are permitted provided that redistributions of source
11 * code retain the above copyright notice and this comment without
12 * modification.
13 *
14 * Technical updates and product information at:
15 * http://www.psidisk.com
16 *
17 * Please send questions, comments, bug reports to:
18 * tech@psidisk.com Technical Support
19 *
20 ****************************************************************************/
21
22#ifndef ROY_HOST
23#define ROY_HOST
24
25/************************************************/
26/* PCI setup */
27/************************************************/
28#define VENDOR_PSI 0x1256
29#define DEVICE_ROY_1 0x5201 /* 'R1' */
30
31/************************************************/
32/* controller constants */
33/************************************************/
34#define MAXADAPTER 4 // Increase this and the sizes of the arrays below, if you need more.
35#define MAX_BUS 2
36#define MAX_UNITS 16
37#define TIMEOUT_COMMAND 400 // number of milliSecondos for command busy timeout
38
39/************************************************/
40/* I/O address offsets */
41/************************************************/
42#define RTR_MAILBOX 0x040
43#define RTR_LOCAL_DOORBELL 0x060
44#define RTR_PCI_DOORBELL 0x064
45
46/************************************************/
47/* */
48/* Host command codes */
49/* */
50/************************************************/
51#define CMD_READ_CHS 0x01 /* read sectors as specified (CHS mode) */
52#define CMD_READ 0x02 /* read sectors as specified (RBA mode) */
53#define CMD_READ_SG 0x03 /* read sectors using scatter/gather list */
54#define CMD_WRITE_CHS 0x04 /* write sectors as specified (CHS mode) */
55#define CMD_WRITE 0x05 /* write sectors as specified (RBA mode) */
56#define CMD_WRITE_SG 0x06 /* write sectors using scatter/gather list (LBA mode) */
57#define CMD_READ_CHS_SG 0x07 /* read sectors using scatter/gather list (CHS mode) */
58#define CMD_WRITE_CHS_SG 0x08 /* write sectors using scatter/gather list (CHS mode) */
59#define CMD_VERIFY_CHS 0x09 /* verify data on sectors as specified (CHS mode) */
60#define CMD_VERIFY 0x0A /* verify data on sectors as specified (RBA mode) */
61#define CMD_DASD_CDB 0x0B /* process CDB for a DASD device */
62#define CMD_DASD_CDB_SG 0x0C /* process CDB for a DASD device with scatter/gather */
63
64#define CMD_READ_ABS 0x10 /* read absolute disk */
65#define CMD_WRITE_ABS 0x11 /* write absolute disk */
66#define CMD_VERIFY_ABS 0x12 /* verify absolute disk */
67#define CMD_TEST_READY 0x13 /* test unit ready and return status code */
68#define CMD_LOCK_DOOR 0x14 /* lock device door */
69#define CMD_UNLOCK_DOOR 0x15 /* unlock device door */
70#define CMD_EJECT_MEDIA 0x16 /* eject the media */
71#define CMD_UPDATE_CAP 0x17 /* update capacity information */
72#define CMD_TEST_PRIV 0x18 /* test and setup private format media */
73
74
75#define CMD_SCSI_THRU 0x30 /* SCSI pass through CDB */
76#define CMD_SCSI_THRU_SG 0x31 /* SCSI pass through CDB with scatter/gather */
77#define CMD_SCSI_REQ_SENSE 0x32 /* SCSI pass through request sense after check condition */
78
79#define CMD_DASD_RAID_RQ 0x35 /* request DASD RAID drive data */
80#define CMD_DASD_RAID_RQ0 0x31 /* byte 1 subcommand to query for RAID 0 informatation */
81#define CMD_DASD_RAID_RQ1 0x32 /* byte 1 subcommand to query for RAID 1 informatation */
82#define CMD_DASD_RAID_RQ5 0x33 /* byte 1 subcommand to query for RAID 5 informatation */
83
84#define CMD_DASD_SCSI_INQ 0x36 /* do DASD inquire and return in SCSI format */
85#define CMD_DASD_CAP 0x37 /* read DASD capacity */
86#define CMD_DASD_INQ 0x38 /* do DASD inquire for type data and return SCSI/EIDE inquiry */
87#define CMD_SCSI_INQ 0x39 /* do SCSI inquire */
88#define CMD_READ_SETUP 0x3A /* Get setup structures from controller */
89#define CMD_WRITE_SETUP 0x3B /* Put setup structures in controller and burn in flash */
90#define CMD_READ_CONFIG 0x3C /* Get the entire configuration and setup structures */
91#define CMD_WRITE_CONFIG 0x3D /* Put the entire configuration and setup structures in flash */
92
93#define CMD_TEXT_DEVICE 0x3E /* obtain device text */
94#define CMD_TEXT_SIGNON 0x3F /* get sign on banner */
95
96#define CMD_QUEUE 0x40 /* any command below this generates a queue tag interrupt to host*/
97
98#define CMD_PREFETCH 0x40 /* prefetch sectors as specified */
99#define CMD_TEST_WRITE 0x41 /* Test a device for write protect */
100#define CMD_LAST_STATUS 0x42 /* get last command status and error data*/
101#define CMD_ABORT 0x43 /* abort command as specified */
102#define CMD_ERROR 0x44 /* fetch error code from a tagged op */
103#define CMD_DONE 0x45 /* done with operation */
104#define CMD_DIAGNOSTICS 0x46 /* execute controller diagnostics and wait for results */
105#define CMD_FEATURE_MODE 0x47 /* feature mode control word */
106#define CMD_DASD_INQUIRE 0x48 /* inquire as to DASD SCSI device (32 possible) */
107#define CMD_FEATURE_QUERY 0x49 /* query the feature control word */
108#define CMD_DASD_EJECT 0x4A /* Eject removable media for DASD type */
109#define CMD_DASD_LOCK 0x4B /* Lock removable media for DASD type */
110#define CMD_DASD_TYPE 0x4C /* obtain DASD device type */
111#define CMD_NUM_DEV 0x4D /* obtain the number of devices connected to the controller */
112#define CMD_GET_PARMS 0x4E /* obtain device parameters */
113#define CMD_SPECIFY 0x4F /* specify operating system for scatter/gather operations */
114
115#define CMD_RAID_GET_DEV 0x50 /* read RAID device geometry */
116#define CMD_RAID_READ 0x51 /* read RAID 1 parameter block */
117#define CMD_RAID_WRITE 0x52 /* write RAID 1 parameter block */
118#define CMD_RAID_LITEUP 0x53 /* Light up the drive light for identification */
119#define CMD_RAID_REBUILD 0x54 /* issue a RAID 1 pair rebuild */
120#define CMD_RAID_MUTE 0x55 /* mute RAID failure alarm */
121#define CMD_RAID_FAIL 0x56 /* induce a RAID failure */
122#define CMD_RAID_STATUS 0x57 /* get status of RAID pair */
123#define CMD_RAID_STOP 0x58 /* stop any reconstruct in progress */
124#define CMD_RAID_START 0x59 /* start reconstruct */
125#define CMD_RAID0_READ 0x5A /* read RAID 0 parameter block */
126#define CMD_RAID0_WRITE 0x5B /* write RAID 0 parameter block */
127#define CMD_RAID5_READ 0x5C /* read RAID 5 parameter block */
128#define CMD_RAID5_WRITE 0x5D /* write RAID 5 parameter block */
129
130#define CMD_ERASE_TABLES 0x5F /* erase partition table and RAID signatutures */
131
132#define CMD_SCSI_GET 0x60 /* get SCSI pass through devices */
133#define CMD_SCSI_TIMEOUT 0x61 /* set SCSI pass through timeout */
134#define CMD_SCSI_ERROR 0x62 /* get SCSI pass through request sense length and residual data count */
135#define CMD_GET_SPARMS 0x63 /* get SCSI bus and user parms */
136#define CMD_SCSI_ABORT 0x64 /* abort by setting time-out to zero */
137
138#define CMD_CHIRP_CHIRP 0x77 /* make a chirp chirp sound */
139#define CMD_GET_LAST_DONE 0x78 /* get tag of last done in progress */
140#define CMD_GET_FEATURES 0x79 /* get feature code and ESN */
141#define CMD_CLEAR_CACHE 0x7A /* Clear cache on specified device */
142#define CMD_BIOS_TEST 0x7B /* Test whether or not to load BIOS */
143#define CMD_WAIT_FLUSH 0x7C /* wait for cache flushed and invalidate read cache */
144#define CMD_RESET_BUS 0x7D /* reset the SCSI bus */
145#define CMD_STARTUP_QRY 0x7E /* startup in progress query */
146#define CMD_RESET 0x7F /* reset the controller */
147
148#define CMD_RESTART_RESET 0x80 /* reload and restart the controller at any reset issued */
149#define CMD_SOFT_RESET 0x81 /* do a soft reset NOW! */
150
151/************************************************/
152/* */
153/* Host return errors */
154/* */
155/************************************************/
156#define ERR08_TAGGED 0x80 /* doorbell error ored with tag */
157
158#define ERR16_NONE 0x0000 /* no errors */
159#define ERR16_SC_COND_MET 0x0004 /* SCSI status - Condition Met */
160#define ERR16_CMD 0x0101 /* command error */
161#define ERR16_SC_CHECK_COND 0x0002 /* SCSI status - Check Condition */
162#define ERR16_CMD_NOT 0x0201 /* command not supported */
163#define ERR16_NO_DEVICE 0x0301 /* invalid device selection */
164#define ERR16_SECTOR 0x0202 /* bad sector */
165#define ERR16_PROTECT 0x0303 /* write protected */
166#define ERR16_NOSECTOR 0x0404 /* sector not found */
167#define ERR16_MEDIA 0x0C0C /* invalid media */
168#define ERR16_CONTROL 0x2020 /* controller error */
169#define ERR16_CONTROL_DMA 0x2120 /* controller DMA engine error */
170#define ERR16_NO_ALARM 0x2220 /* alarm is not active */
171#define ERR16_OP_BUSY 0x2320 /* operation busy */
172#define ERR16_SEEK 0x4040 /* seek failure */
173#define ERR16_DEVICE_FAIL 0x4140 /* device has failed */
174#define ERR16_TIMEOUT 0x8080 /* timeout error */
175#define ERR16_DEV_NOT_READY 0xAAAA /* drive not ready */
176#define ERR16_UNDEFINED 0xBBBB /* undefined error */
177#define ERR16_WRITE_FAULT 0xCCCC /* write fault */
178#define ERR16_INVALID_DEV 0x4001 /* invalid device access */
179#define ERR16_DEVICE_BUSY 0x4002 /* device is busy */
180#define ERR16_MEMORY 0x4003 /* device pass thru requires too much memory */
181#define ERR16_NO_FEATURE 0x40FA /* feature no implemented */
182#define ERR16_NOTAG 0x40FD /* no tag space available */
183#define ERR16_NOT_READY 0x40FE /* controller not ready error */
184#define ERR16_SETUP_FLASH 0x5050 /* error when writing setup to flash memory */
185#define ERR16_SETUP_SIZE 0x5051 /* setup block size error */
186#define ERR16_SENSE 0xFFFF /* sense opereration failed */
187#define ERR16_SC_BUSY 0x0008 /* SCSI status - Busy */
188#define ERR16_SC_RES_CONFL 0x0018 /* SCSI status - Reservation Conflict */
189#define ERR16_SC_CMD_TERM 0x0022 /* SCSI status - Command Terminated */
190#define ERR16_SC_OTHER 0x00FF /* SCSI status - not recognized (any value masked) */
191#define ERR16_MEDIA_CHANGED 0x8001 /* devices media has been changed */
192
193#define ERR32_NONE 0x00000000 /* no errors */
194#define ERR32_SC_COND_MET 0x00000004 /* SCSI status - Condition Met */
195#define ERR32_CMD 0x00010101 /* command error */
196#define ERR32_SC_CHECK_COND 0x00020002 /* SCSI status - Check Condition */
197#define ERR32_CMD_NOT 0x00030201 /* command not supported */
198#define ERR32_NO_DEVICE 0x00040301 /* invalid device selection */
199#define ERR32_SECTOR 0x00050202 /* bad sector */
200#define ERR32_PROTECT 0x00060303 /* write protected */
201#define ERR32_NOSECTOR 0x00070404 /* sector not found */
202#define ERR32_MEDIA 0x00080C0C /* invalid media */
203#define ERR32_CONTROL 0x00092020 /* controller error */
204#define ERR32_CONTROL_DMA 0x000A2120 /* Controller DMA error */
205#define ERR32_NO_ALARM 0x000B2220 /* alarm is not active */
206#define ERR32_OP_BUSY 0x000C2320 /* operation busy */
207#define ERR32_SEEK 0x000D4040 /* seek failure */
208#define ERR32_DEVICE_FAIL 0x000E4140 /* device has failed */
209#define ERR32_TIMEOUT 0x000F8080 /* timeout error */
210#define ERR32_DEV_NOT_READY 0x0010AAAA /* drive not ready */
211#define ERR32_UNDEFINED 0x0011BBBB /* undefined error */
212#define ERR32_WRITE_FAULT 0x0012CCCC /* write fault */
213#define ERR32_INVALID_DEV 0x00134001 /* invalid device access */
214#define ERR32_DEVICE_BUSY 0x00144002 /* device is busy */
215#define ERR32_MEMORY 0x00154003 /* device pass thru requires too much memory */
216#define ERR32_NO_FEATURE 0x001640FA /* feature no implemented */
217#define ERR32_NOTAG 0x001740FD /* no tag space available */
218#define ERR32_NOT_READY 0x001840FE /* controller not ready error */
219#define ERR32_SETUP_FLASH 0x00195050 /* error when writing setup to flash memory */
220#define ERR32_SETUP_SIZE 0x001A5051 /* setup block size error */
221#define ERR32_SENSE 0x001BFFFF /* sense opereration failed */
222#define ERR32_SC_BUSY 0x001C0008 /* SCSI status - Busy */
223#define ERR32_SC_RES_CONFL 0x001D0018 /* SCSI status - Reservation Conflict */
224#define ERR32_SC_CMD_TERM 0x001E0022 /* SCSI status - Command Terminated */
225#define ERR32_SC_OTHER 0x001F00FF /* SCSI status - not recognized (any value masked) */
226#define ERR32_MEDIA_CHANGED 0x00208001 /* devices media has been changed */
227
228/************************************************/
229/* */
230/* Host Operating System specification codes */
231/* */
232/************************************************/
233#define SPEC_INTERRUPT 0x80 /* specification requires host interrupt */
234#define SPEC_BACKWARD_SG 0x40 /* specification requires scatter/gather items reversed */
235#define SPEC_DOS_BLOCK 0x01 /* DOS DASD blocking on pass through */
236#define SPEC_OS2_V3 0x02 /* OS/2 Warp */
237#define SPCE_SCO_3242 0x04 /* SCO 3.4.2.2 */
238#define SPEC_QNX_4X 0x05 /* QNX 4.XX */
239#define SPEC_NOVELL_NWPA 0x08 /* Novell NWPA scatter/gather support */
240
241/************************************************/
242/* */
243/* Inquire structures */
244/* */
245/************************************************/
246typedef struct _CNT_SCSI_INQ
247 {
248 UCHAR devt; /* 00: device type */
249 UCHAR devtm; /* 01: device type modifier */
250 UCHAR svers; /* 02: SCSI version */
251 UCHAR rfmt; /* 03: response data format */
252 UCHAR adlen; /* 04: additional length of data */
253 UCHAR res1; /* 05: */
254 UCHAR res2; /* 06: */
255 UCHAR fncs; /* 07: functional capabilities */
256 UCHAR vid[8]; /* 08: vendor ID */
257 UCHAR pid[16]; /* 10: product ID */
258 UCHAR rev[4]; /* 20: product revision */
259 } CNT_SCSI_INQ;
260
261typedef struct _CNT_IDE_INQ
262 {
263 USHORT GeneralConfiguration; /* 00 */
264 USHORT NumberOfCylinders; /* 02 */
265 USHORT Reserved1; /* 04 */
266 USHORT NumberOfHeads; /* 06 */
267 USHORT UnformattedBytesPerTrack; /* 08 */
268 USHORT UnformattedBytesPerSector; /* 0A */
269 USHORT SectorsPerTrack; /* 0C */
270 USHORT VendorUnique1[3]; /* 0E */
271 USHORT SerialNumber[10]; /* 14 */
272 USHORT BufferType; /* 28 */
273 USHORT BufferSectorSize; /* 2A */
274 USHORT NumberOfEccBytes; /* 2C */
275 USHORT FirmwareRevision[4]; /* 2E */
276 USHORT ModelNumber[20]; /* 36 */
277 UCHAR MaximumBlockTransfer; /* 5E */
278 UCHAR VendorUnique2; /* 5F */
279 USHORT DoubleWordIo; /* 60 */
280 USHORT Capabilities; /* 62 */
281 USHORT Reserved2; /* 64 */
282 UCHAR VendorUnique3; /* 66 */
283 UCHAR PioCycleTimingMode; /* 67 */
284 UCHAR VendorUnique4; /* 68 */
285 UCHAR DmaCycleTimingMode; /* 69 */
286 USHORT TranslationFieldsValid; /* 6A */
287 USHORT NumberOfCurrentCylinders; /* 6C */
288 USHORT NumberOfCurrentHeads; /* 6E */
289 USHORT CurrentSectorsPerTrack; /* 70 */
290 ULONG CurrentSectorCapacity; /* 72 */
291 } CNT_IDE_INQ;
292
293typedef struct _DASD_INQUIRE
294 {
295 ULONG type; /* 0 = SCSI, 1 = IDE */
296 union
297 {
298 CNT_SCSI_INQ scsi; /* SCSI inquire data */
299 CNT_IDE_INQ ide; /* IDE inquire data */
300 } inq;
301 } DASD_INQUIRE;
302
303/************************************************/
304/* */
305/* Device Codes */
306/* */
307/************************************************/
308#define DEVC_DASD 0x00 /* Direct-access Storage Device */
309#define DEVC_SEQACESS 0x01 /* Sequential-access device */
310#define DEVC_PRINTER 0x02 /* Printer device */
311#define DEVC_PROCESSOR 0x03 /* Processor device */
312#define DEVC_WRITEONCE 0x04 /* Write-once device */
313#define DEVC_CDROM 0x05 /* CD-ROM device */
314#define DEVC_SCANNER 0x06 /* Scanner device */
315#define DEVC_OPTICAL 0x07 /* Optical memory device */
316#define DEVC_MEDCHGR 0x08 /* Medium changer device */
317#define DEVC_DASD_REMOVABLE 0x80 /* Direct-access storage device, Removable */
318#define DEVC_NONE 0xFF /* no device */
319
320// SCSI controls for RAID
321#define SC_MY_RAID 0xBF // our special CDB command byte for Win95... interface
322#define MY_SCSI_QUERY0 0x31 // byte 1 subcommand to query driver for RAID 0 informatation
323#define MY_SCSI_QUERY1 0x32 // byte 1 subcommand to query driver for RAID 1 informatation
324#define MY_SCSI_QUERY5 0x33 // byte 1 subcommand to query driver for RAID 5 informatation
325#define MY_SCSI_REBUILD 0x40 // byte 1 subcommand to reconstruct a mirrored pair
326#define MY_SCSI_DEMOFAIL 0x54 // byte 1 subcommand for RAID failure demonstration
327#define MY_SCSI_ALARMMUTE 0x60 // byte 1 subcommand to mute any alarm currently on
328
329
330#endif
331
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-22 22:53:50 -0500