pcmcia: do not use io_req_t when calling pcmcia_request_io()

Instead of io_req_t, drivers are now requested to fill out
struct pcmcia_device *p_dev->resource[0,1] for up to two ioport
ranges. After a call to pcmcia_request_io(), the ports found there
are reserved, after calling pcmcia_request_configuration(), they may
be used.

CC: netdev@vger.kernel.org
CC: linux-wireless@vger.kernel.org
CC: linux-ide@vger.kernel.org
CC: linux-usb@vger.kernel.org
CC: laforge@gnumonks.org
CC: linux-mtd@lists.infradead.org
CC: alsa-devel@alsa-project.org
CC: linux-serial@vger.kernel.org
CC: Michael Buesch <mb@bu3sch.de>
Acked-by: Marcel Holtmann <marcel@holtmann.org> (for drivers/bluetooth/)
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>

1 files changed, 7 insertions, 7 deletions

diff --git a/drivers/scsi/pcmcia/sym53c500_cs.c b/drivers/scsi/pcmcia/sym53c500_cs.c
index d99c0cbad2de..321e390c9120 100644
--- a/drivers/scsi/pcmcia/sym53c500_cs.c
+++ b/drivers/scsi/pcmcia/sym53c500_cs.c
@@ -690,13 +690,14 @@ static int SYM53C500_config_check(struct pcmcia_device *p_dev,
                                   unsigned int vcc,
                                   void *priv_data)
 {
-        p_dev->io.BasePort1 = cfg->io.win[0].base;
-        p_dev->io.NumPorts1 = cfg->io.win[0].len;
+        p_dev->io_lines = 10;
+        p_dev->resource[0]->start = cfg->io.win[0].base;
+        p_dev->resource[0]->end = cfg->io.win[0].len;
 
-        if (p_dev->io.BasePort1 == 0)
+        if (p_dev->resource[0]->start == 0)
                 return -ENODEV;
 
-        return pcmcia_request_io(p_dev, &p_dev->io);
+        return pcmcia_request_io(p_dev);
 }
 
 static int
@@ -858,9 +859,8 @@ SYM53C500_probe(struct pcmcia_device *link)
                 return -ENOMEM;
         info->p_dev = link;
         link->priv = info;
-        link->io.NumPorts1 = 16;
-        link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-        link->io.IOAddrLines = 10;
+        link->resource[0]->end = 16;
+        link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
         link->conf.Attributes = CONF_ENABLE_IRQ;
         link->conf.IntType = INT_MEMORY_AND_IO;