[PATCH] libata: implement dummy port

Implement dummy port which can be requested by setting appropriate bit
in probe_ent->dummy_port_mask.  The dummy port is used as placeholder
for stolen legacy port.  This allows libata to guarantee that
index_of(ap) == ap->port_no == actual_device_port_no, and thus to
remove error-prone ap->hard_port_no.

As it's used only when one port of a legacy controller is reserved by
some other entity (e.g. IDE), the focus is on keeping the added *code*
complexity at minimum, so dummy port allocates all libata core
resources and acts as a normal port.  It just has all dummy port_ops.

This patch only implements dummy port.  The following patch will make
libata use it for stolen legacy ports.

Signed-off-by: Tejun Heo <htejun@gmail.com>

1 files changed, 51 insertions, 10 deletions

diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index 3634279d896d..f2e7e2f13db9 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -5311,7 +5311,6 @@ static struct ata_port * ata_port_add(const struct ata_probe_ent *ent,
 {
         struct Scsi_Host *shost;
         struct ata_port *ap;
-        int rc;
 
         DPRINTK("ENTER\n");
 
@@ -5333,15 +5332,7 @@ static struct ata_port * ata_port_add(const struct ata_probe_ent *ent,
         ata_port_init(ap, host_set, ent, port_no);
         ata_port_init_shost(ap, shost);
 
-        rc = ap->ops->port_start(ap);
-        if (rc)
-                goto err_out;
-
         return ap;
-
-err_out:
-        scsi_host_put(shost);
-        return NULL;
 }
 
 /**
@@ -5415,11 +5406,27 @@ int ata_device_add(const struct ata_probe_ent *ent)
                 if (!ap)
                         goto err_out;
 
+                host_set->ports[i] = ap;
+
+                /* dummy? */
+                if (ent->dummy_port_mask & (1 << i)) {
+                        ata_port_printk(ap, KERN_INFO, "DUMMY\n");
+                        ap->ops = &ata_dummy_port_ops;
+                        continue;
+                }
+
+                /* start port */
+                rc = ap->ops->port_start(ap);
+                if (rc) {
+                        host_set->ports[i] = NULL;
+                        scsi_host_put(ap->host);
+                        goto err_out;
+                }
+
                 /* Report the secondary IRQ for second channel legacy */
                 if (i == 1 && ent->irq2)
                         irq_line = ent->irq2;
 
-                host_set->ports[i] = ap;
                 xfer_mode_mask =(ap->udma_mask << ATA_SHIFT_UDMA) |
                                 (ap->mwdma_mask << ATA_SHIFT_MWDMA) |
                                 (ap->pio_mask << ATA_SHIFT_PIO);
@@ -5941,6 +5948,39 @@ u32 ata_wait_register(void __iomem *reg, u32 mask, u32 val,
 }
 
 /*
+ * Dummy port_ops
+ */
+static void ata_dummy_noret(struct ata_port *ap)        { }
+static int ata_dummy_ret0(struct ata_port *ap)          { return 0; }
+static void ata_dummy_qc_noret(struct ata_queued_cmd *qc) { }
+
+static u8 ata_dummy_check_status(struct ata_port *ap)
+{
+        return ATA_DRDY;
+}
+
+static unsigned int ata_dummy_qc_issue(struct ata_queued_cmd *qc)
+{
+        return AC_ERR_SYSTEM;
+}
+
+const struct ata_port_operations ata_dummy_port_ops = {
+        .port_disable           = ata_port_disable,
+        .check_status           = ata_dummy_check_status,
+        .check_altstatus        = ata_dummy_check_status,
+        .dev_select             = ata_noop_dev_select,
+        .qc_prep                = ata_noop_qc_prep,
+        .qc_issue               = ata_dummy_qc_issue,
+        .freeze                 = ata_dummy_noret,
+        .thaw                   = ata_dummy_noret,
+        .error_handler          = ata_dummy_noret,
+        .post_internal_cmd      = ata_dummy_qc_noret,
+        .irq_clear              = ata_dummy_noret,
+        .port_start             = ata_dummy_ret0,
+        .port_stop              = ata_dummy_noret,
+};
+
+/*
  * libata is essentially a library of internal helper functions for
  * low-level ATA host controller drivers.  As such, the API/ABI is
  * likely to change as new drivers are added and updated.
@@ -5950,6 +5990,7 @@ u32 ata_wait_register(void __iomem *reg, u32 mask, u32 val,
 EXPORT_SYMBOL_GPL(sata_deb_timing_normal);
 EXPORT_SYMBOL_GPL(sata_deb_timing_hotplug);
 EXPORT_SYMBOL_GPL(sata_deb_timing_long);
+EXPORT_SYMBOL_GPL(ata_dummy_port_ops);
 EXPORT_SYMBOL_GPL(ata_std_bios_param);
 EXPORT_SYMBOL_GPL(ata_std_ports);
 EXPORT_SYMBOL_GPL(ata_host_set_init);