[SCSI] dpt_i2o: move from virt_to_bus/bus_to_virt to dma_alloc_coherent

Remove virt_to_bus/bus_to_virt code from dpt_i2o, and use
dma_alloc_coherent() / dma_free_coherent().

This is in preparation of 64-bit support, dma_alloc_coherent()
can allocate memory in the lower 32 bits of physical memory
which is needed because the HBA only supports message blocks under 4GB

This code is based in part on the unofficial adaptec 64-bit
dpt_i2o driver update that I got from Mark Salyzyn at Adaptec.

Signed-off-by: Miquel van Smoorenburg <miquels@cistron.nl>
Acked-by: Mark Salyzyn <Mark_Salyzyn@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

1 files changed, 163 insertions, 73 deletions

diff --git a/drivers/scsi/dpt_i2o.c b/drivers/scsi/dpt_i2o.c
index 30c741a12a62..7b1a084ec94e 100644
--- a/drivers/scsi/dpt_i2o.c
+++ b/drivers/scsi/dpt_i2o.c
@@ -29,11 +29,6 @@
 /*#define DEBUG 1 */
 /*#define UARTDELAY 1 */
 
-/* On the real kernel ADDR32 should always be zero for 2.4. GFP_HIGH allocates
-   high pages. Keep the macro around because of the broken unmerged ia64 tree */
-
-#define ADDR32 (0)
-
 #include <linux/module.h>
 
 MODULE_AUTHOR("Deanna Bonds, with _lots_ of help from Mark Salyzyn");
@@ -108,9 +103,10 @@ static dpt_sig_S DPTI_sig = {
 
 static DEFINE_MUTEX(adpt_configuration_lock);
 
-static struct i2o_sys_tbl *sys_tbl = NULL;
-static int sys_tbl_ind = 0;
-static int sys_tbl_len = 0;
+static struct i2o_sys_tbl *sys_tbl;
+static dma_addr_t sys_tbl_pa;
+static int sys_tbl_ind;
+static int sys_tbl_len;
 
 static adpt_hba* hba_chain = NULL;
 static int hba_count = 0;
@@ -142,6 +138,16 @@ static DEFINE_SPINLOCK(adpt_post_wait_lock);
  *============================================================================
  */
 
+static inline u32 dma_high(dma_addr_t addr)
+{
+        return upper_32_bits(addr);
+}
+
+static inline u32 dma_low(dma_addr_t addr)
+{
+        return (u32)addr;
+}
+
 static u8 adpt_read_blink_led(adpt_hba* host)
 {
         if(host->FwDebugBLEDflag_P != 0) {
@@ -279,11 +285,12 @@ static void adpt_inquiry(adpt_hba* pHba)
         u32 len;
         u32 reqlen;
         u8* buf;
+        dma_addr_t addr;
         u8  scb[16];
         s32 rcode;
 
         memset(msg, 0, sizeof(msg));
-        buf = kmalloc(80,GFP_KERNEL|ADDR32);
+        buf = dma_alloc_coherent(&pHba->pDev->dev, 80, &addr, GFP_KERNEL);
         if(!buf){
                 printk(KERN_ERR"%s: Could not allocate buffer\n",pHba->name);
                 return;
@@ -328,7 +335,7 @@ static void adpt_inquiry(adpt_hba* pHba)
         /* Now fill in the SGList and command */
         *lenptr = len;
         *mptr++ = 0xD0000000|direction|len;
-        *mptr++ = virt_to_bus(buf);
+        *mptr++ = addr;
 
         // Send it on it's way
         rcode = adpt_i2o_post_wait(pHba, msg, reqlen<<2, 120);
@@ -336,7 +343,7 @@ static void adpt_inquiry(adpt_hba* pHba)
                 sprintf(pHba->detail, "Adaptec I2O RAID");
                 printk(KERN_INFO "%s: Inquiry Error (%d)\n",pHba->name,rcode);
                 if (rcode != -ETIME && rcode != -EINTR)
-                        kfree(buf);
+                        dma_free_coherent(&pHba->pDev->dev, 80, buf, addr);
         } else {
                 memset(pHba->detail, 0, sizeof(pHba->detail));
                 memcpy(&(pHba->detail), "Vendor: Adaptec ", 16);
@@ -345,7 +352,7 @@ static void adpt_inquiry(adpt_hba* pHba)
                 memcpy(&(pHba->detail[40]), " FW: ", 4);
                 memcpy(&(pHba->detail[44]), (u8*) &buf[32], 4);
                 pHba->detail[48] = '\0';        /* precautionary */
-                kfree(buf);
+                dma_free_coherent(&pHba->pDev->dev, 80, buf, addr);
         }
         adpt_i2o_status_get(pHba);
         return ;
@@ -621,7 +628,6 @@ stop_output:
         return len;
 }
 
-
 /*===========================================================================
  * Error Handling routines
  *===========================================================================
@@ -877,6 +883,9 @@ static int adpt_install_hba(struct scsi_host_template* sht, struct pci_dev* pDev
         if (pci_set_dma_mask(pDev, DMA_32BIT_MASK))
                 return -EINVAL;
 
+        /* adapter only supports message blocks below 4GB */
+        pci_set_consistent_dma_mask(pDev, DMA_32BIT_MASK);
+
         base_addr0_phys = pci_resource_start(pDev,0);
         hba_map0_area_size = pci_resource_len(pDev,0);
 
@@ -1021,10 +1030,24 @@ static void adpt_i2o_delete_hba(adpt_hba* pHba)
         if(pHba->msg_addr_virt != pHba->base_addr_virt){
                 iounmap(pHba->msg_addr_virt);
         }
-        kfree(pHba->hrt);
-        kfree(pHba->lct);
-        kfree(pHba->status_block);
-        kfree(pHba->reply_pool);
+        if(pHba->hrt) {
+                dma_free_coherent(&pHba->pDev->dev,
+                        pHba->hrt->num_entries * pHba->hrt->entry_len << 2,
+                        pHba->hrt, pHba->hrt_pa);
+        }
+        if(pHba->lct) {
+                dma_free_coherent(&pHba->pDev->dev, pHba->lct_size,
+                        pHba->lct, pHba->lct_pa);
+        }
+        if(pHba->status_block) {
+                dma_free_coherent(&pHba->pDev->dev, sizeof(i2o_status_block),
+                        pHba->status_block, pHba->status_block_pa);
+        }
+        if(pHba->reply_pool) {
+                dma_free_coherent(&pHba->pDev->dev,
+                        pHba->reply_fifo_size * REPLY_FRAME_SIZE * 4,
+                        pHba->reply_pool, pHba->reply_pool_pa);
+        }
 
         for(d = pHba->devices; d ; d = next){
                 next = d->next;
@@ -1239,6 +1262,7 @@ static s32 adpt_i2o_reset_hba(adpt_hba* pHba)
 {
         u32 msg[8];
         u8* status;
+        dma_addr_t addr;
         u32 m = EMPTY_QUEUE ;
         ulong timeout = jiffies + (TMOUT_IOPRESET*HZ);
 
@@ -1261,12 +1285,13 @@ static s32 adpt_i2o_reset_hba(adpt_hba* pHba)
                 schedule_timeout_uninterruptible(1);
         } while (m == EMPTY_QUEUE);
 
-        status = kzalloc(4, GFP_KERNEL|ADDR32);
+        status = dma_alloc_coherent(&pHba->pDev->dev, 4, &addr, GFP_KERNEL);
         if(status == NULL) {
                 adpt_send_nop(pHba, m);
                 printk(KERN_ERR"IOP reset failed - no free memory.\n");
                 return -ENOMEM;
         }
+        memset(status,0,4);
 
         msg[0]=EIGHT_WORD_MSG_SIZE|SGL_OFFSET_0;
         msg[1]=I2O_CMD_ADAPTER_RESET<<24|HOST_TID<<12|ADAPTER_TID;
@@ -1274,8 +1299,8 @@ static s32 adpt_i2o_reset_hba(adpt_hba* pHba)
         msg[3]=0;
         msg[4]=0;
         msg[5]=0;
-        msg[6]=virt_to_bus(status);
-        msg[7]=0;     
+        msg[6]=dma_low(addr);
+        msg[7]=dma_high(addr);
 
         memcpy_toio(pHba->msg_addr_virt+m, msg, sizeof(msg));
         wmb();
@@ -1285,7 +1310,10 @@ static s32 adpt_i2o_reset_hba(adpt_hba* pHba)
         while(*status == 0){
                 if(time_after(jiffies,timeout)){
                         printk(KERN_WARNING"%s: IOP Reset Timeout\n",pHba->name);
-                        kfree(status);
+                        /* We lose 4 bytes of "status" here, but we cannot
+                           free these because controller may awake and corrupt
+                           those bytes at any time */
+                        /* dma_free_coherent(&pHba->pDev->dev, 4, buf, addr); */
                         return -ETIMEDOUT;
                 }
                 rmb();
@@ -1304,6 +1332,10 @@ static s32 adpt_i2o_reset_hba(adpt_hba* pHba)
                         }
                         if(time_after(jiffies,timeout)){
                                 printk(KERN_ERR "%s:Timeout waiting for IOP Reset.\n",pHba->name);
+                                /* We lose 4 bytes of "status" here, but we
+                                   cannot free these because controller may
+                                   awake and corrupt those bytes at any time */
+                                /* dma_free_coherent(&pHba->pDev->dev, 4, buf, addr); */
                                 return -ETIMEDOUT;
                         }
                         schedule_timeout_uninterruptible(1);
@@ -1320,7 +1352,7 @@ static s32 adpt_i2o_reset_hba(adpt_hba* pHba)
                 PDEBUG("%s: Reset completed.\n", pHba->name);
         }
 
-        kfree(status);
+        dma_free_coherent(&pHba->pDev->dev, 4, status, addr);
 #ifdef UARTDELAY
         // This delay is to allow someone attached to the card through the debug UART to 
         // set up the dump levels that they want before the rest of the initialization sequence
@@ -1592,6 +1624,7 @@ static int adpt_i2o_passthru(adpt_hba* pHba, u32 __user *arg)
         u32 i = 0;
         u32 rcode = 0;
         void *p = NULL;
+        dma_addr_t addr;
         ulong flags = 0;
 
         memset(&msg, 0, MAX_MESSAGE_SIZE*4);
@@ -1646,7 +1679,7 @@ static int adpt_i2o_passthru(adpt_hba* pHba, u32 __user *arg)
                         }
                         sg_size = sg[i].flag_count & 0xffffff;      
                         /* Allocate memory for the transfer */
-                        p = kmalloc(sg_size, GFP_KERNEL|ADDR32);
+                        p = dma_alloc_coherent(&pHba->pDev->dev, sg_size, &addr, GFP_KERNEL);
                         if(!p) {
                                 printk(KERN_DEBUG"%s: Could not allocate SG buffer - size = %d buffer number %d of %d\n",
                                                 pHba->name,sg_size,i,sg_count);
@@ -1743,12 +1776,17 @@ static int adpt_i2o_passthru(adpt_hba* pHba, u32 __user *arg)
 
 
 cleanup:
-        if (rcode != -ETIME && rcode != -EINTR)
+        if (rcode != -ETIME && rcode != -EINTR) {
+                struct sg_simple_element *sg =
+                                (struct sg_simple_element*) (msg +sg_offset);
                 kfree (reply);
-        while(sg_index) {
-                if(sg_list[--sg_index]) {
-                        if (rcode != -ETIME && rcode != -EINTR)
-                                kfree(sg_list[sg_index]);
+                while(sg_index) {
+                        if(sg_list[--sg_index]) {
+                                dma_free_coherent(&pHba->pDev->dev,
+                                        sg[sg_index].flag_count & 0xffffff,
+                                        sg_list[sg_index],
+                                        sg[sg_index].addr_bus);
+                        }
                 }
         }
         return rcode;
@@ -1965,7 +2003,16 @@ static irqreturn_t adpt_isr(int irq, void *dev_id)
                                 goto out;
                         }
                 }
-                reply = bus_to_virt(m);
+                if (pHba->reply_pool_pa <= m &&
+                    m < pHba->reply_pool_pa +
+                        (pHba->reply_fifo_size * REPLY_FRAME_SIZE * 4)) {
+                        reply = (u8 *)pHba->reply_pool +
+                                                (m - pHba->reply_pool_pa);
+                } else {
+                        /* Ick, we should *never* be here */
+                        printk(KERN_ERR "dpti: reply frame not from pool\n");
+                        reply = (u8 *)bus_to_virt(m);
+                }
 
                 if (readl(reply) & MSG_FAIL) {
                         u32 old_m = readl(reply+28); 
@@ -2008,6 +2055,7 @@ static irqreturn_t adpt_isr(int irq, void *dev_id)
                 } else { // SCSI message
                         cmd = (struct scsi_cmnd*) readl(reply+12); 
                         if(cmd != NULL){
+                                scsi_dma_unmap(cmd);
                                 if(cmd->serial_number != 0) { // If not timedout
                                         adpt_i2o_to_scsi(reply, cmd);
                                 }
@@ -2156,7 +2204,7 @@ static s32 adpt_scsi_host_alloc(adpt_hba* pHba, struct scsi_host_template *sht)
         host->max_lun = 256;
         host->max_channel = pHba->top_scsi_channel + 1;
         host->cmd_per_lun = 1;
-        host->unique_id = (uint) pHba;
+        host->unique_id = (u32)sys_tbl_pa + pHba->unit;
         host->sg_tablesize = pHba->sg_tablesize;
         host->can_queue = pHba->post_fifo_size;
 
@@ -2596,11 +2644,10 @@ static s32 adpt_send_nop(adpt_hba*pHba,u32 m)
 static s32 adpt_i2o_init_outbound_q(adpt_hba* pHba)
 {
         u8 *status;
+        dma_addr_t addr;
         u32 __iomem *msg = NULL;
         int i;
         ulong timeout = jiffies + TMOUT_INITOUTBOUND*HZ;
-        u32* ptr;
-        u32 outbound_frame;  // This had to be a 32 bit address
         u32 m;
 
         do {
@@ -2619,13 +2666,14 @@ static s32 adpt_i2o_init_outbound_q(adpt_hba* pHba)
 
         msg=(u32 __iomem *)(pHba->msg_addr_virt+m);
 
-        status = kzalloc(4, GFP_KERNEL|ADDR32);
+        status = dma_alloc_coherent(&pHba->pDev->dev, 4, &addr, GFP_KERNEL);
         if (!status) {
                 adpt_send_nop(pHba, m);
                 printk(KERN_WARNING"%s: IOP reset failed - no free memory.\n",
                         pHba->name);
                 return -ENOMEM;
         }
+        memset(status, 0, 4);
 
         writel(EIGHT_WORD_MSG_SIZE| SGL_OFFSET_6, &msg[0]);
         writel(I2O_CMD_OUTBOUND_INIT<<24 | HOST_TID<<12 | ADAPTER_TID, &msg[1]);
@@ -2634,7 +2682,7 @@ static s32 adpt_i2o_init_outbound_q(adpt_hba* pHba)
         writel(4096, &msg[4]);          /* Host page frame size */
         writel((REPLY_FRAME_SIZE)<<16|0x80, &msg[5]);   /* Outbound msg frame size and Initcode */
         writel(0xD0000004, &msg[6]);            /* Simple SG LE, EOB */
-        writel(virt_to_bus(status), &msg[7]);
+        writel((u32)addr, &msg[7]);
 
         writel(m, pHba->post_port);
         wmb();
@@ -2649,6 +2697,10 @@ static s32 adpt_i2o_init_outbound_q(adpt_hba* pHba)
                 rmb();
                 if(time_after(jiffies,timeout)){
                         printk(KERN_WARNING"%s: Timeout Initializing\n",pHba->name);
+                        /* We lose 4 bytes of "status" here, but we
+                           cannot free these because controller may
+                           awake and corrupt those bytes at any time */
+                        /* dma_free_coherent(&pHba->pDev->dev, 4, status, addr); */
                         return -ETIMEDOUT;
                 }
                 schedule_timeout_uninterruptible(1);
@@ -2657,25 +2709,30 @@ static s32 adpt_i2o_init_outbound_q(adpt_hba* pHba)
         // If the command was successful, fill the fifo with our reply
         // message packets
         if(*status != 0x04 /*I2O_EXEC_OUTBOUND_INIT_COMPLETE*/) {
-                kfree(status);
+                dma_free_coherent(&pHba->pDev->dev, 4, status, addr);
                 return -2;
         }
-        kfree(status);
+        dma_free_coherent(&pHba->pDev->dev, 4, status, addr);
 
-        kfree(pHba->reply_pool);
+        if(pHba->reply_pool != NULL) {
+                dma_free_coherent(&pHba->pDev->dev,
+                        pHba->reply_fifo_size * REPLY_FRAME_SIZE * 4,
+                        pHba->reply_pool, pHba->reply_pool_pa);
+        }
 
-        pHba->reply_pool = kzalloc(pHba->reply_fifo_size * REPLY_FRAME_SIZE * 4, GFP_KERNEL|ADDR32);
+        pHba->reply_pool = dma_alloc_coherent(&pHba->pDev->dev,
+                                pHba->reply_fifo_size * REPLY_FRAME_SIZE * 4,
+                                &pHba->reply_pool_pa, GFP_KERNEL);
         if (!pHba->reply_pool) {
                 printk(KERN_ERR "%s: Could not allocate reply pool\n", pHba->name);
                 return -ENOMEM;
         }
+        memset(pHba->reply_pool, 0 , pHba->reply_fifo_size * REPLY_FRAME_SIZE * 4);
 
-        ptr = pHba->reply_pool;
         for(i = 0; i < pHba->reply_fifo_size; i++) {
-                outbound_frame = (u32)virt_to_bus(ptr);
-                writel(outbound_frame, pHba->reply_port);
+                writel(pHba->reply_pool_pa + (i * REPLY_FRAME_SIZE * 4),
+                        pHba->reply_port);
                 wmb();
-                ptr +=  REPLY_FRAME_SIZE;
         }
         adpt_i2o_status_get(pHba);
         return 0;
@@ -2699,11 +2756,11 @@ static s32 adpt_i2o_status_get(adpt_hba* pHba)
         u32 m;
         u32 __iomem *msg;
         u8 *status_block=NULL;
-        ulong status_block_bus;
 
         if(pHba->status_block == NULL) {
-                pHba->status_block = (i2o_status_block*)
-                        kmalloc(sizeof(i2o_status_block),GFP_KERNEL|ADDR32);
+                pHba->status_block = dma_alloc_coherent(&pHba->pDev->dev,
+                                        sizeof(i2o_status_block),
+                                        &pHba->status_block_pa, GFP_KERNEL);
                 if(pHba->status_block == NULL) {
                         printk(KERN_ERR
                         "dpti%d: Get Status Block failed; Out of memory. \n", 
@@ -2713,7 +2770,6 @@ static s32 adpt_i2o_status_get(adpt_hba* pHba)
         }
         memset(pHba->status_block, 0, sizeof(i2o_status_block));
         status_block = (u8*)(pHba->status_block);
-        status_block_bus = virt_to_bus(pHba->status_block);
         timeout = jiffies+TMOUT_GETSTATUS*HZ;
         do {
                 rmb();
@@ -2738,8 +2794,8 @@ static s32 adpt_i2o_status_get(adpt_hba* pHba)
         writel(0, &msg[3]);
         writel(0, &msg[4]);
         writel(0, &msg[5]);
-        writel(((u32)status_block_bus)&0xffffffff, &msg[6]);
-        writel(0, &msg[7]);
+        writel( dma_low(pHba->status_block_pa), &msg[6]);
+        writel( dma_high(pHba->status_block_pa), &msg[7]);
         writel(sizeof(i2o_status_block), &msg[8]); // 88 bytes
 
         //post message
@@ -2819,7 +2875,9 @@ static int adpt_i2o_lct_get(adpt_hba* pHba)
         }
         do {
                 if (pHba->lct == NULL) {
-                        pHba->lct = kmalloc(pHba->lct_size, GFP_KERNEL|ADDR32);
+                        pHba->lct = dma_alloc_coherent(&pHba->pDev->dev,
+                                        pHba->lct_size, &pHba->lct_pa,
+                                        GFP_KERNEL);
                         if(pHba->lct == NULL) {
                                 printk(KERN_CRIT "%s: Lct Get failed. Out of memory.\n",
                                         pHba->name);
@@ -2835,7 +2893,7 @@ static int adpt_i2o_lct_get(adpt_hba* pHba)
                 msg[4] = 0xFFFFFFFF;    /* All devices */
                 msg[5] = 0x00000000;    /* Report now */
                 msg[6] = 0xD0000000|pHba->lct_size;
-                msg[7] = virt_to_bus(pHba->lct);
+                msg[7] = (u32)pHba->lct_pa;
 
                 if ((ret=adpt_i2o_post_wait(pHba, msg, sizeof(msg), 360))) {
                         printk(KERN_ERR "%s: LCT Get failed (status=%#10x.\n", 
@@ -2846,7 +2904,8 @@ static int adpt_i2o_lct_get(adpt_hba* pHba)
 
                 if ((pHba->lct->table_size << 2) > pHba->lct_size) {
                         pHba->lct_size = pHba->lct->table_size << 2;
-                        kfree(pHba->lct);
+                        dma_free_coherent(&pHba->pDev->dev, pHba->lct_size,
+                                        pHba->lct, pHba->lct_pa);
                         pHba->lct = NULL;
                 }
         } while (pHba->lct == NULL);
@@ -2871,25 +2930,30 @@ static int adpt_i2o_lct_get(adpt_hba* pHba)
 
 static int adpt_i2o_build_sys_table(void)
 {
-        adpt_hba* pHba = NULL;
+        adpt_hba* pHba = hba_chain;
         int count = 0;
 
+        if (sys_tbl)
+                dma_free_coherent(&pHba->pDev->dev, sys_tbl_len,
+                                        sys_tbl, sys_tbl_pa);
+
         sys_tbl_len = sizeof(struct i2o_sys_tbl) +      // Header + IOPs
                                 (hba_count) * sizeof(struct i2o_sys_tbl_entry);
 
-        kfree(sys_tbl);
-
-        sys_tbl = kzalloc(sys_tbl_len, GFP_KERNEL|ADDR32);
+        sys_tbl = dma_alloc_coherent(&pHba->pDev->dev,
+                                sys_tbl_len, &sys_tbl_pa, GFP_KERNEL);
         if (!sys_tbl) {
                 printk(KERN_WARNING "SysTab Set failed. Out of memory.\n");     
                 return -ENOMEM;
         }
+        memset(sys_tbl, 0, sys_tbl_len);
 
         sys_tbl->num_entries = hba_count;
         sys_tbl->version = I2OVERSION;
         sys_tbl->change_ind = sys_tbl_ind++;
 
         for(pHba = hba_chain; pHba; pHba = pHba->next) {
+                u64 addr;
                 // Get updated Status Block so we have the latest information
                 if (adpt_i2o_status_get(pHba)) {
                         sys_tbl->num_entries--;
@@ -2905,8 +2969,9 @@ static int adpt_i2o_build_sys_table(void)
                 sys_tbl->iops[count].frame_size = pHba->status_block->inbound_frame_size;
                 sys_tbl->iops[count].last_changed = sys_tbl_ind - 1; // ??
                 sys_tbl->iops[count].iop_capabilities = pHba->status_block->iop_capabilities;
-                sys_tbl->iops[count].inbound_low = (u32)virt_to_bus(pHba->post_port);
-                sys_tbl->iops[count].inbound_high = (u32)((u64)virt_to_bus(pHba->post_port)>>32);
+                addr = pHba->base_addr_phys + 0x40;
+                sys_tbl->iops[count].inbound_low = dma_low(addr);
+                sys_tbl->iops[count].inbound_high = dma_high(addr);
 
                 count++;
         }
@@ -3042,7 +3107,8 @@ static s32 adpt_i2o_hrt_get(adpt_hba* pHba)
 
         do {
                 if (pHba->hrt == NULL) {
-                        pHba->hrt=kmalloc(size, GFP_KERNEL|ADDR32);
+                        pHba->hrt = dma_alloc_coherent(&pHba->pDev->dev,
+                                        size, &pHba->hrt_pa, GFP_KERNEL);
                         if (pHba->hrt == NULL) {
                                 printk(KERN_CRIT "%s: Hrt Get failed; Out of memory.\n", pHba->name);
                                 return -ENOMEM;
@@ -3054,7 +3120,7 @@ static s32 adpt_i2o_hrt_get(adpt_hba* pHba)
                 msg[2]= 0;
                 msg[3]= 0;
                 msg[4]= (0xD0000000 | size);    /* Simple transaction */
-                msg[5]= virt_to_bus(pHba->hrt);   /* Dump it here */
+                msg[5]= (u32)pHba->hrt_pa;      /* Dump it here */
 
                 if ((ret = adpt_i2o_post_wait(pHba, msg, sizeof(msg),20))) {
                         printk(KERN_ERR "%s: Unable to get HRT (status=%#10x)\n", pHba->name, ret);
@@ -3062,8 +3128,10 @@ static s32 adpt_i2o_hrt_get(adpt_hba* pHba)
                 }
 
                 if (pHba->hrt->num_entries * pHba->hrt->entry_len << 2 > size) {
-                        size = pHba->hrt->num_entries * pHba->hrt->entry_len << 2;
-                        kfree(pHba->hrt);
+                        int newsize = pHba->hrt->num_entries * pHba->hrt->entry_len << 2;
+                        dma_free_coherent(&pHba->pDev->dev, size,
+                                pHba->hrt, pHba->hrt_pa);
+                        size = newsize;
                         pHba->hrt = NULL;
                 }
         } while(pHba->hrt == NULL);
@@ -3077,33 +3145,54 @@ static int adpt_i2o_query_scalar(adpt_hba* pHba, int tid,
                         int group, int field, void *buf, int buflen)
 {
         u16 opblk[] = { 1, 0, I2O_PARAMS_FIELD_GET, group, 1, field };
-        u8 *resblk;
+        u8 *opblk_va;
+        dma_addr_t opblk_pa;
+        u8 *resblk_va;
+        dma_addr_t resblk_pa;
 
         int size;
 
         /* 8 bytes for header */
-        resblk = kmalloc(sizeof(u8) * (8+buflen), GFP_KERNEL|ADDR32);
-        if (resblk == NULL) {
+        resblk_va = dma_alloc_coherent(&pHba->pDev->dev,
+                        sizeof(u8) * (8 + buflen), &resblk_pa, GFP_KERNEL);
+        if (resblk_va == NULL) {
                 printk(KERN_CRIT "%s: query scalar failed; Out of memory.\n", pHba->name);
                 return -ENOMEM;
         }
 
+        opblk_va = dma_alloc_coherent(&pHba->pDev->dev,
+                        sizeof(opblk), &opblk_pa, GFP_KERNEL);
+        if (opblk_va == NULL) {
+                dma_free_coherent(&pHba->pDev->dev, sizeof(u8) * (8+buflen),
+                        resblk_va, resblk_pa);
+                printk(KERN_CRIT "%s: query operatio failed; Out of memory.\n",
+                        pHba->name);
+                return -ENOMEM;
+        }
         if (field == -1)                /* whole group */
                         opblk[4] = -1;
 
+        memcpy(opblk_va, opblk, sizeof(opblk));
         size = adpt_i2o_issue_params(I2O_CMD_UTIL_PARAMS_GET, pHba, tid, 
-                opblk, sizeof(opblk), resblk, sizeof(u8)*(8+buflen));
+                opblk_va, opblk_pa, sizeof(opblk),
+                resblk_va, resblk_pa, sizeof(u8)*(8+buflen));
+        dma_free_coherent(&pHba->pDev->dev, sizeof(opblk), opblk_va, opblk_pa);
         if (size == -ETIME) {
+                dma_free_coherent(&pHba->pDev->dev, sizeof(u8) * (8+buflen),
+                                                        resblk_va, resblk_pa);
                 printk(KERN_WARNING "%s: issue params failed; Timed out.\n", pHba->name);
                 return -ETIME;
         } else if (size == -EINTR) {
+                dma_free_coherent(&pHba->pDev->dev, sizeof(u8) * (8+buflen),
+                                                        resblk_va, resblk_pa);
                 printk(KERN_WARNING "%s: issue params failed; Interrupted.\n", pHba->name);
                 return -EINTR;
         }
                         
-        memcpy(buf, resblk+8, buflen);  /* cut off header */
+        memcpy(buf, resblk_va+8, buflen);  /* cut off header */
 
-        kfree(resblk);
+        dma_free_coherent(&pHba->pDev->dev, sizeof(u8) * (8+buflen),
+                                                resblk_va, resblk_pa);
         if (size < 0)
                 return size;    
 
@@ -3120,10 +3209,11 @@ static int adpt_i2o_query_scalar(adpt_hba* pHba, int tid,
  *      ResultCount, ErrorInfoSize, BlockStatus and BlockSize.
  */
 static int adpt_i2o_issue_params(int cmd, adpt_hba* pHba, int tid, 
-                  void *opblk, int oplen, void *resblk, int reslen)
+                  void *opblk_va,  dma_addr_t opblk_pa, int oplen,
+                void *resblk_va, dma_addr_t resblk_pa, int reslen)
 {
         u32 msg[9]; 
-        u32 *res = (u32 *)resblk;
+        u32 *res = (u32 *)resblk_va;
         int wait_status;
 
         msg[0] = NINE_WORD_MSG_SIZE | SGL_OFFSET_5;
@@ -3132,12 +3222,12 @@ static int adpt_i2o_issue_params(int cmd, adpt_hba* pHba, int tid,
         msg[3] = 0;
         msg[4] = 0;
         msg[5] = 0x54000000 | oplen;    /* OperationBlock */
-        msg[6] = virt_to_bus(opblk);
+        msg[6] = (u32)opblk_pa;
         msg[7] = 0xD0000000 | reslen;   /* ResultBlock */
-        msg[8] = virt_to_bus(resblk);
+        msg[8] = (u32)resblk_pa;
 
         if ((wait_status = adpt_i2o_post_wait(pHba, msg, sizeof(msg), 20))) {
-                printk("adpt_i2o_issue_params: post_wait failed (%p)\n", resblk);
+                printk("adpt_i2o_issue_params: post_wait failed (%p)\n", resblk_va);
                 return wait_status;     /* -DetailedStatus */
         }
 
@@ -3240,7 +3330,7 @@ static int adpt_i2o_systab_send(adpt_hba* pHba)
          * Private i/o space declaration  
          */
         msg[6] = 0x54000000 | sys_tbl_len;
-        msg[7] = virt_to_phys(sys_tbl);
+        msg[7] = (u32)sys_tbl_pa;
         msg[8] = 0x54000000 | 0;
         msg[9] = 0;
         msg[10] = 0xD4000000 | 0;