[SCSI] scsi_dh: Provide set_params interface in emc device handler

Handle the parameters provided by user thru multipath.

This handler expects only 2 parameters and their value can either be 0 or 1.

This code originates from the old dm-emc.c file. Appropriate changes have
been made to make it work in the new design.

Reported-by: Eddie Williams <Eddie.Williams@steeleye.com>
Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Tested-by: Eddie Williams <Eddie.Williams@steeleye.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

1 files changed, 56 insertions, 3 deletions

diff --git a/drivers/scsi/device_handler/scsi_dh_emc.c b/drivers/scsi/device_handler/scsi_dh_emc.c
index 0e572d2c5b0a..0cffe84976fe 100644
--- a/drivers/scsi/device_handler/scsi_dh_emc.c
+++ b/drivers/scsi/device_handler/scsi_dh_emc.c
@@ -561,6 +561,61 @@ done:
 
         return result;
 }
+/*
+ * params - parameters in the following format
+ *      "no_of_params\0param1\0param2\0param3\0...\0"
+ *      for example, string for 2 parameters with value 10 and 21
+ *      is specified as "2\010\021\0".
+ */
+static int clariion_set_params(struct scsi_device *sdev, const char *params)
+{
+        struct clariion_dh_data *csdev = get_clariion_data(sdev);
+        unsigned int hr = 0, st = 0, argc;
+        const char *p = params;
+        int result = SCSI_DH_OK;
+
+        if ((sscanf(params, "%u", &argc) != 1) || (argc != 2))
+                return -EINVAL;
+
+        while (*p++)
+                ;
+        if ((sscanf(p, "%u", &st) != 1) || (st > 1))
+                return -EINVAL;
+
+        while (*p++)
+                ;
+        if ((sscanf(p, "%u", &hr) != 1) || (hr > 1))
+                return -EINVAL;
+
+        if (st)
+                csdev->flags |= CLARIION_SHORT_TRESPASS;
+        else
+                csdev->flags &= ~CLARIION_SHORT_TRESPASS;
+
+        if (hr)
+                csdev->flags |= CLARIION_HONOR_RESERVATIONS;
+        else
+                csdev->flags &= ~CLARIION_HONOR_RESERVATIONS;
+
+        /*
+         * If this path is owned, we have to send a trespass command
+         * with the new parameters. If not, simply return. Next trespass
+         * command would use the parameters.
+         */
+        if (csdev->lun_state != CLARIION_LUN_OWNED)
+                goto done;
+
+        csdev->lun_state = CLARIION_LUN_UNINITIALIZED;
+        result = send_trespass_cmd(sdev, csdev);
+        if (result != SCSI_DH_OK)
+                goto done;
+
+        /* Update status */
+        result = clariion_send_inquiry(sdev, csdev);
+
+done:
+        return result;
+}
 
 static const struct scsi_dh_devlist clariion_dev_list[] = {
         {"DGC", "RAID"},
@@ -581,11 +636,9 @@ static struct scsi_device_handler clariion_dh = {
         .check_sense    = clariion_check_sense,
         .activate       = clariion_activate,
         .prep_fn        = clariion_prep_fn,
+        .set_params     = clariion_set_params,
 };
 
-/*
- * TODO: need some interface so we can set trespass values
- */
 static int clariion_bus_attach(struct scsi_device *sdev)
 {
         struct scsi_dh_data *scsi_dh_data;