csiostor: Segregate T4 adapter operations.

This patch separates T4 adapter operations into a new file.

Signed-off-by: Arvind Bhushan <arvindb@chelsio.com>
Signed-off-by: Naresh Kumar Inna <naresh@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 403 insertions, 0 deletions

diff --git a/drivers/scsi/csiostor/csio_hw_t4.c b/drivers/scsi/csiostor/csio_hw_t4.c
new file mode 100644
index 000000000000..89ecbac5478f
--- /dev/null
+++ b/drivers/scsi/csiostor/csio_hw_t4.c
@@ -0,0 +1,403 @@
+/*
+ * This file is part of the Chelsio FCoE driver for Linux.
+ *
+ * Copyright (c) 2008-2013 Chelsio Communications, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include "csio_hw.h"
+#include "csio_init.h"
+
+/*
+ * Return the specified PCI-E Configuration Space register from our Physical
+ * Function.  We try first via a Firmware LDST Command since we prefer to let
+ * the firmware own all of these registers, but if that fails we go for it
+ * directly ourselves.
+ */
+static uint32_t
+csio_t4_read_pcie_cfg4(struct csio_hw *hw, int reg)
+{
+        u32 val = 0;
+        struct csio_mb *mbp;
+        int rv;
+        struct fw_ldst_cmd *ldst_cmd;
+
+        mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC);
+        if (!mbp) {
+                CSIO_INC_STATS(hw, n_err_nomem);
+                pci_read_config_dword(hw->pdev, reg, &val);
+                return val;
+        }
+
+        csio_mb_ldst(hw, mbp, CSIO_MB_DEFAULT_TMO, reg);
+        rv = csio_mb_issue(hw, mbp);
+
+        /*
+         * If the LDST Command suucceeded, exctract the returned register
+         * value.  Otherwise read it directly ourself.
+         */
+        if (rv == 0) {
+                ldst_cmd = (struct fw_ldst_cmd *)(mbp->mb);
+                val = ntohl(ldst_cmd->u.pcie.data[0]);
+        } else
+                pci_read_config_dword(hw->pdev, reg, &val);
+
+        mempool_free(mbp, hw->mb_mempool);
+
+        return val;
+}
+
+static int
+csio_t4_set_mem_win(struct csio_hw *hw, uint32_t win)
+{
+        u32 bar0;
+        u32 mem_win_base;
+
+        /*
+         * Truncation intentional: we only read the bottom 32-bits of the
+         * 64-bit BAR0/BAR1 ...  We use the hardware backdoor mechanism to
+         * read BAR0 instead of using pci_resource_start() because we could be
+         * operating from within a Virtual Machine which is trapping our
+         * accesses to our Configuration Space and we need to set up the PCI-E
+         * Memory Window decoders with the actual addresses which will be
+         * coming across the PCI-E link.
+         */
+        bar0 = csio_t4_read_pcie_cfg4(hw, PCI_BASE_ADDRESS_0);
+        bar0 &= PCI_BASE_ADDRESS_MEM_MASK;
+
+        mem_win_base = bar0 + MEMWIN_BASE;
+
+        /*
+         * Set up memory window for accessing adapter memory ranges.  (Read
+         * back MA register to ensure that changes propagate before we attempt
+         * to use the new values.)
+         */
+        csio_wr_reg32(hw, mem_win_base | BIR(0) |
+                          WINDOW(ilog2(MEMWIN_APERTURE) - 10),
+                          PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN, win));
+        csio_rd_reg32(hw,
+                      PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN, win));
+        return 0;
+}
+
+/*
+ * Interrupt handler for the PCIE module.
+ */
+static void
+csio_t4_pcie_intr_handler(struct csio_hw *hw)
+{
+        static struct intr_info sysbus_intr_info[] = {
+                { RNPP, "RXNP array parity error", -1, 1 },
+                { RPCP, "RXPC array parity error", -1, 1 },
+                { RCIP, "RXCIF array parity error", -1, 1 },
+                { RCCP, "Rx completions control array parity error", -1, 1 },
+                { RFTP, "RXFT array parity error", -1, 1 },
+                { 0, NULL, 0, 0 }
+        };
+        static struct intr_info pcie_port_intr_info[] = {
+                { TPCP, "TXPC array parity error", -1, 1 },
+                { TNPP, "TXNP array parity error", -1, 1 },
+                { TFTP, "TXFT array parity error", -1, 1 },
+                { TCAP, "TXCA array parity error", -1, 1 },
+                { TCIP, "TXCIF array parity error", -1, 1 },
+                { RCAP, "RXCA array parity error", -1, 1 },
+                { OTDD, "outbound request TLP discarded", -1, 1 },
+                { RDPE, "Rx data parity error", -1, 1 },
+                { TDUE, "Tx uncorrectable data error", -1, 1 },
+                { 0, NULL, 0, 0 }
+        };
+
+        static struct intr_info pcie_intr_info[] = {
+                { MSIADDRLPERR, "MSI AddrL parity error", -1, 1 },
+                { MSIADDRHPERR, "MSI AddrH parity error", -1, 1 },
+                { MSIDATAPERR, "MSI data parity error", -1, 1 },
+                { MSIXADDRLPERR, "MSI-X AddrL parity error", -1, 1 },
+                { MSIXADDRHPERR, "MSI-X AddrH parity error", -1, 1 },
+                { MSIXDATAPERR, "MSI-X data parity error", -1, 1 },
+                { MSIXDIPERR, "MSI-X DI parity error", -1, 1 },
+                { PIOCPLPERR, "PCI PIO completion FIFO parity error", -1, 1 },
+                { PIOREQPERR, "PCI PIO request FIFO parity error", -1, 1 },
+                { TARTAGPERR, "PCI PCI target tag FIFO parity error", -1, 1 },
+                { CCNTPERR, "PCI CMD channel count parity error", -1, 1 },
+                { CREQPERR, "PCI CMD channel request parity error", -1, 1 },
+                { CRSPPERR, "PCI CMD channel response parity error", -1, 1 },
+                { DCNTPERR, "PCI DMA channel count parity error", -1, 1 },
+                { DREQPERR, "PCI DMA channel request parity error", -1, 1 },
+                { DRSPPERR, "PCI DMA channel response parity error", -1, 1 },
+                { HCNTPERR, "PCI HMA channel count parity error", -1, 1 },
+                { HREQPERR, "PCI HMA channel request parity error", -1, 1 },
+                { HRSPPERR, "PCI HMA channel response parity error", -1, 1 },
+                { CFGSNPPERR, "PCI config snoop FIFO parity error", -1, 1 },
+                { FIDPERR, "PCI FID parity error", -1, 1 },
+                { INTXCLRPERR, "PCI INTx clear parity error", -1, 1 },
+                { MATAGPERR, "PCI MA tag parity error", -1, 1 },
+                { PIOTAGPERR, "PCI PIO tag parity error", -1, 1 },
+                { RXCPLPERR, "PCI Rx completion parity error", -1, 1 },
+                { RXWRPERR, "PCI Rx write parity error", -1, 1 },
+                { RPLPERR, "PCI replay buffer parity error", -1, 1 },
+                { PCIESINT, "PCI core secondary fault", -1, 1 },
+                { PCIEPINT, "PCI core primary fault", -1, 1 },
+                { UNXSPLCPLERR, "PCI unexpected split completion error", -1,
+                  0 },
+                { 0, NULL, 0, 0 }
+        };
+
+        int fat;
+        fat = csio_handle_intr_status(hw,
+                                      PCIE_CORE_UTL_SYSTEM_BUS_AGENT_STATUS,
+                                      sysbus_intr_info) +
+              csio_handle_intr_status(hw,
+                                      PCIE_CORE_UTL_PCI_EXPRESS_PORT_STATUS,
+                                      pcie_port_intr_info) +
+              csio_handle_intr_status(hw, PCIE_INT_CAUSE, pcie_intr_info);
+        if (fat)
+                csio_hw_fatal_err(hw);
+}
+
+/*
+ * csio_t4_flash_cfg_addr - return the address of the flash configuration file
+ * @hw: the HW module
+ *
+ * Return the address within the flash where the Firmware Configuration
+ * File is stored.
+ */
+static unsigned int
+csio_t4_flash_cfg_addr(struct csio_hw *hw)
+{
+        return FLASH_CFG_OFFSET;
+}
+
+/*
+ *      csio_t4_mc_read - read from MC through backdoor accesses
+ *      @hw: the hw module
+ *      @idx: not used for T4 adapter
+ *      @addr: address of first byte requested
+ *      @data: 64 bytes of data containing the requested address
+ *      @ecc: where to store the corresponding 64-bit ECC word
+ *
+ *      Read 64 bytes of data from MC starting at a 64-byte-aligned address
+ *      that covers the requested address @addr.  If @parity is not %NULL it
+ *      is assigned the 64-bit ECC word for the read data.
+ */
+static int
+csio_t4_mc_read(struct csio_hw *hw, int idx, uint32_t addr, __be32 *data,
+                uint64_t *ecc)
+{
+        int i;
+
+        if (csio_rd_reg32(hw, MC_BIST_CMD) & START_BIST)
+                return -EBUSY;
+        csio_wr_reg32(hw, addr & ~0x3fU, MC_BIST_CMD_ADDR);
+        csio_wr_reg32(hw, 64, MC_BIST_CMD_LEN);
+        csio_wr_reg32(hw, 0xc, MC_BIST_DATA_PATTERN);
+        csio_wr_reg32(hw, BIST_OPCODE(1) | START_BIST | BIST_CMD_GAP(1),
+                      MC_BIST_CMD);
+        i = csio_hw_wait_op_done_val(hw, MC_BIST_CMD, START_BIST,
+                                     0, 10, 1, NULL);
+        if (i)
+                return i;
+
+#define MC_DATA(i) MC_BIST_STATUS_REG(MC_BIST_STATUS_RDATA, i)
+
+        for (i = 15; i >= 0; i--)
+                *data++ = htonl(csio_rd_reg32(hw, MC_DATA(i)));
+        if (ecc)
+                *ecc = csio_rd_reg64(hw, MC_DATA(16));
+#undef MC_DATA
+        return 0;
+}
+
+/*
+ *      csio_t4_edc_read - read from EDC through backdoor accesses
+ *      @hw: the hw module
+ *      @idx: which EDC to access
+ *      @addr: address of first byte requested
+ *      @data: 64 bytes of data containing the requested address
+ *      @ecc: where to store the corresponding 64-bit ECC word
+ *
+ *      Read 64 bytes of data from EDC starting at a 64-byte-aligned address
+ *      that covers the requested address @addr.  If @parity is not %NULL it
+ *      is assigned the 64-bit ECC word for the read data.
+ */
+static int
+csio_t4_edc_read(struct csio_hw *hw, int idx, uint32_t addr, __be32 *data,
+                uint64_t *ecc)
+{
+        int i;
+
+        idx *= EDC_STRIDE;
+        if (csio_rd_reg32(hw, EDC_BIST_CMD + idx) & START_BIST)
+                return -EBUSY;
+        csio_wr_reg32(hw, addr & ~0x3fU, EDC_BIST_CMD_ADDR + idx);
+        csio_wr_reg32(hw, 64, EDC_BIST_CMD_LEN + idx);
+        csio_wr_reg32(hw, 0xc, EDC_BIST_DATA_PATTERN + idx);
+        csio_wr_reg32(hw, BIST_OPCODE(1) | BIST_CMD_GAP(1) | START_BIST,
+                      EDC_BIST_CMD + idx);
+        i = csio_hw_wait_op_done_val(hw, EDC_BIST_CMD + idx, START_BIST,
+                                     0, 10, 1, NULL);
+        if (i)
+                return i;
+
+#define EDC_DATA(i) (EDC_BIST_STATUS_REG(EDC_BIST_STATUS_RDATA, i) + idx)
+
+        for (i = 15; i >= 0; i--)
+                *data++ = htonl(csio_rd_reg32(hw, EDC_DATA(i)));
+        if (ecc)
+                *ecc = csio_rd_reg64(hw, EDC_DATA(16));
+#undef EDC_DATA
+        return 0;
+}
+
+/*
+ * csio_t4_memory_rw - read/write EDC 0, EDC 1 or MC via PCIE memory window
+ * @hw: the csio_hw
+ * @win: PCI-E memory Window to use
+ * @mtype: memory type: MEM_EDC0, MEM_EDC1, MEM_MC0 (or MEM_MC) or MEM_MC1
+ * @addr: address within indicated memory type
+ * @len: amount of memory to transfer
+ * @buf: host memory buffer
+ * @dir: direction of transfer 1 => read, 0 => write
+ *
+ * Reads/writes an [almost] arbitrary memory region in the firmware: the
+ * firmware memory address, length and host buffer must be aligned on
+ * 32-bit boudaries.  The memory is transferred as a raw byte sequence
+ * from/to the firmware's memory.  If this memory contains data
+ * structures which contain multi-byte integers, it's the callers
+ * responsibility to perform appropriate byte order conversions.
+ */
+static int
+csio_t4_memory_rw(struct csio_hw *hw, u32 win, int mtype, u32 addr,
+                u32 len, uint32_t *buf, int dir)
+{
+        u32 pos, start, offset, memoffset, bar0;
+        u32 edc_size, mc_size, mem_reg, mem_aperture, mem_base;
+
+        /*
+         * Argument sanity checks ...
+         */
+        if ((addr & 0x3) || (len & 0x3))
+                return -EINVAL;
+
+        /* Offset into the region of memory which is being accessed
+         * MEM_EDC0 = 0
+         * MEM_EDC1 = 1
+         * MEM_MC   = 2 -- T4
+         */
+        edc_size  = EDRAM_SIZE_GET(csio_rd_reg32(hw, MA_EDRAM0_BAR));
+        if (mtype != MEM_MC1)
+                memoffset = (mtype * (edc_size * 1024 * 1024));
+        else {
+                mc_size = EXT_MEM_SIZE_GET(csio_rd_reg32(hw,
+                                                         MA_EXT_MEMORY_BAR));
+                memoffset = (MEM_MC0 * edc_size + mc_size) * 1024 * 1024;
+        }
+
+        /* Determine the PCIE_MEM_ACCESS_OFFSET */
+        addr = addr + memoffset;
+
+        /*
+         * Each PCI-E Memory Window is programmed with a window size -- or
+         * "aperture" -- which controls the granularity of its mapping onto
+         * adapter memory.  We need to grab that aperture in order to know
+         * how to use the specified window.  The window is also programmed
+         * with the base address of the Memory Window in BAR0's address
+         * space.  For T4 this is an absolute PCI-E Bus Address.  For T5
+         * the address is relative to BAR0.
+         */
+        mem_reg = csio_rd_reg32(hw,
+                        PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN, win));
+        mem_aperture = 1 << (WINDOW(mem_reg) + 10);
+        mem_base = GET_PCIEOFST(mem_reg) << 10;
+
+        bar0 = csio_t4_read_pcie_cfg4(hw, PCI_BASE_ADDRESS_0);
+        bar0 &= PCI_BASE_ADDRESS_MEM_MASK;
+        mem_base -= bar0;
+
+        start = addr & ~(mem_aperture-1);
+        offset = addr - start;
+
+        csio_dbg(hw, "csio_t4_memory_rw: mem_reg: 0x%x, mem_aperture: 0x%x\n",
+                 mem_reg, mem_aperture);
+        csio_dbg(hw, "csio_t4_memory_rw: mem_base: 0x%x, mem_offset: 0x%x\n",
+                 mem_base, memoffset);
+        csio_dbg(hw, "csio_t4_memory_rw: bar0: 0x%x, start:0x%x, offset:0x%x\n",
+                 bar0, start, offset);
+        csio_dbg(hw, "csio_t4_memory_rw: mtype: %d, addr: 0x%x, len: %d\n",
+                 mtype, addr, len);
+
+        for (pos = start; len > 0; pos += mem_aperture, offset = 0) {
+                /*
+                 * Move PCI-E Memory Window to our current transfer
+                 * position.  Read it back to ensure that changes propagate
+                 * before we attempt to use the new value.
+                 */
+                csio_wr_reg32(hw, pos,
+                        PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_OFFSET, win));
+                csio_rd_reg32(hw,
+                        PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_OFFSET, win));
+
+                while (offset < mem_aperture && len > 0) {
+                        if (dir)
+                                *buf++ = csio_rd_reg32(hw, mem_base + offset);
+                        else
+                                csio_wr_reg32(hw, *buf++, mem_base + offset);
+
+                        offset += sizeof(__be32);
+                        len -= sizeof(__be32);
+                }
+        }
+        return 0;
+}
+
+/*
+ * csio_t4_dfs_create_ext_mem - setup debugfs for MC to read the values
+ * @hw: the csio_hw
+ *
+ * This function creates files in the debugfs with external memory region MC.
+ */
+static void
+csio_t4_dfs_create_ext_mem(struct csio_hw *hw)
+{
+        u32 size;
+        int i = csio_rd_reg32(hw, MA_TARGET_MEM_ENABLE);
+        if (i & EXT_MEM_ENABLE) {
+                size = csio_rd_reg32(hw, MA_EXT_MEMORY_BAR);
+                csio_add_debugfs_mem(hw, "mc", MEM_MC,
+                                     EXT_MEM_SIZE_GET(size));
+        }
+}
+
+/* T4 adapter specific function */
+struct csio_hw_chip_ops t4_ops = {
+        .chip_set_mem_win               = csio_t4_set_mem_win,
+        .chip_pcie_intr_handler         = csio_t4_pcie_intr_handler,
+        .chip_flash_cfg_addr            = csio_t4_flash_cfg_addr,
+        .chip_mc_read                   = csio_t4_mc_read,
+        .chip_edc_read                  = csio_t4_edc_read,
+        .chip_memory_rw                 = csio_t4_memory_rw,
+        .chip_dfs_create_ext_mem        = csio_t4_dfs_create_ext_mem,
+};